From: Wolfram Sang <wsa+renesas@sang-engineering.com>
To: linux-i2c@vger.kernel.org
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>,
Rudolf Marek <r.marek@assembler.cz>,
Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>,
linux-hwmon@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH RESEND 3/3] hwmon: w83793d: convert to use devm_i2c_new_dummy_device
Date: Tue, 3 Sep 2019 20:12:56 +0200 [thread overview]
Message-ID: <20190903181256.13450-4-wsa+renesas@sang-engineering.com> (raw)
In-Reply-To: <20190903181256.13450-1-wsa+renesas@sang-engineering.com>
And simplify the error handling.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
drivers/hwmon/w83793.c | 30 ++++++++----------------------
1 file changed, 8 insertions(+), 22 deletions(-)
diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c
index 46f5dfec8d0a..9df48b70c70c 100644
--- a/drivers/hwmon/w83793.c
+++ b/drivers/hwmon/w83793.c
@@ -1551,9 +1551,6 @@ static int w83793_remove(struct i2c_client *client)
for (i = 0; i < ARRAY_SIZE(w83793_temp); i++)
device_remove_file(dev, &w83793_temp[i].dev_attr);
- i2c_unregister_device(data->lm75[0]);
- i2c_unregister_device(data->lm75[1]);
-
/* Decrease data reference counter */
mutex_lock(&watchdog_data_mutex);
kref_put(&data->kref, w83793_release_resources);
@@ -1565,7 +1562,7 @@ static int w83793_remove(struct i2c_client *client)
static int
w83793_detect_subclients(struct i2c_client *client)
{
- int i, id, err;
+ int i, id;
int address = client->addr;
u8 tmp;
struct i2c_adapter *adapter = client->adapter;
@@ -1580,8 +1577,7 @@ w83793_detect_subclients(struct i2c_client *client)
"invalid subclient "
"address %d; must be 0x48-0x4f\n",
force_subclients[i]);
- err = -EINVAL;
- goto ERROR_SC_0;
+ return -EINVAL;
}
}
w83793_write_value(client, W83793_REG_I2C_SUBADDR,
@@ -1591,28 +1587,21 @@ w83793_detect_subclients(struct i2c_client *client)
tmp = w83793_read_value(client, W83793_REG_I2C_SUBADDR);
if (!(tmp & 0x08))
- data->lm75[0] = i2c_new_dummy(adapter, 0x48 + (tmp & 0x7));
+ data->lm75[0] = devm_i2c_new_dummy_device(&client->dev, adapter,
+ 0x48 + (tmp & 0x7));
if (!(tmp & 0x80)) {
- if ((data->lm75[0] != NULL)
+ if (!IS_ERR(data->lm75[0])
&& ((tmp & 0x7) == ((tmp >> 4) & 0x7))) {
dev_err(&client->dev,
"duplicate addresses 0x%x, "
"use force_subclients\n", data->lm75[0]->addr);
- err = -ENODEV;
- goto ERROR_SC_1;
+ return -ENODEV;
}
- data->lm75[1] = i2c_new_dummy(adapter,
- 0x48 + ((tmp >> 4) & 0x7));
+ data->lm75[1] = devm_i2c_new_dummy_device(&client->dev, adapter,
+ 0x48 + ((tmp >> 4) & 0x7));
}
return 0;
-
- /* Undo inits in case of errors */
-
-ERROR_SC_1:
- i2c_unregister_device(data->lm75[0]);
-ERROR_SC_0:
- return err;
}
/* Return 0 if detection is successful, -ENODEV otherwise */
@@ -1945,9 +1934,6 @@ static int w83793_probe(struct i2c_client *client,
for (i = 0; i < ARRAY_SIZE(w83793_temp); i++)
device_remove_file(dev, &w83793_temp[i].dev_attr);
-
- i2c_unregister_device(data->lm75[0]);
- i2c_unregister_device(data->lm75[1]);
free_mem:
kfree(data);
exit:
--
2.20.1
next prev parent reply other threads:[~2019-09-03 18:13 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-03 18:12 [PATCH RESEND 0/3] hwmon: convert remaining drivers to i2c_new_dummy_device() Wolfram Sang
2019-09-03 18:12 ` [PATCH RESEND 1/3] hwmon: w83791d: convert to use devm_i2c_new_dummy_device Wolfram Sang
2019-09-03 19:44 ` Guenter Roeck
2019-09-03 18:12 ` [PATCH RESEND 2/3] hwmon: w83792d: " Wolfram Sang
2019-09-03 19:45 ` Guenter Roeck
2019-09-03 18:12 ` Wolfram Sang [this message]
2019-09-03 19:46 ` [PATCH RESEND 3/3] hwmon: w83793d: " Guenter Roeck
2019-09-03 18:33 ` [PATCH RESEND 0/3] hwmon: convert remaining drivers to i2c_new_dummy_device() Guenter Roeck
2019-09-03 18:37 ` Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190903181256.13450-4-wsa+renesas@sang-engineering.com \
--to=wsa+renesas@sang-engineering.com \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=r.marek@assembler.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).