Linux-Hwmon Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 0/1] hwmon: (shtc1) add support for the SHTC3 sensor
@ 2019-09-05  1:01 Dan Robertson
  2019-09-05  1:01 ` [PATCH] " Dan Robertson
  0 siblings, 1 reply; 8+ messages in thread
From: Dan Robertson @ 2019-09-05  1:01 UTC (permalink / raw)
  To: linux-hwmon; +Cc: Jean Delvare, Guenter Roeck, Dan Robertson

I added support for the Sensirion SHTC3 temperature and humidity sensor
to the shtc1 module and added the relevant documentation.

Cheers,

Dan

Dan Robertson (1):
  hwmon: (shtc1) add support for the SHTC3 sensor

 Documentation/hwmon/shtc1.rst | 19 +++++++++----
 drivers/hwmon/Kconfig         |  4 +--
 drivers/hwmon/shtc1.c         | 50 ++++++++++++++++++++++++++---------
 3 files changed, 53 insertions(+), 20 deletions(-)

-- 
2.23.0




^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, back to index

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-05  1:01 [PATCH 0/1] hwmon: (shtc1) add support for the SHTC3 sensor Dan Robertson
2019-09-05  1:01 ` [PATCH] " Dan Robertson
2019-09-05  1:45   ` [PATCH 0/2] " Dan Robertson
2019-09-05  1:45     ` [PATCH 1/2] " Dan Robertson
2019-09-10 18:14       ` Guenter Roeck
2019-09-05  1:45     ` [PATCH 2/2] hwmon: (shtc1) fix shtc1 and shtw1 id mask Dan Robertson
2019-09-10 18:43       ` Guenter Roeck
2019-09-10 18:57         ` Dan Robertson

Linux-Hwmon Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-hwmon/0 linux-hwmon/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-hwmon linux-hwmon/ https://lore.kernel.org/linux-hwmon \
		linux-hwmon@vger.kernel.org
	public-inbox-index linux-hwmon

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-hwmon


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git