From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-8.1 required=3.0 tests=DKIM_INVALID,DKIM_SIGNED, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI,SIGNED_OFF_BY, SPF_HELO_NONE,SPF_PASS,USER_AGENT_SANE_1 autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id DD659C352AA for ; Tue, 1 Oct 2019 18:34:09 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 7BBEF215EA for ; Tue, 1 Oct 2019 18:34:09 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=fail reason="signature verification failed" (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="nfhOYsGx" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1725875AbfJASeJ (ORCPT ); Tue, 1 Oct 2019 14:34:09 -0400 Received: from mail-pf1-f196.google.com ([209.85.210.196]:45414 "EHLO mail-pf1-f196.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725851AbfJASeI (ORCPT ); Tue, 1 Oct 2019 14:34:08 -0400 Received: by mail-pf1-f196.google.com with SMTP id y72so8648084pfb.12 for ; Tue, 01 Oct 2019 11:34:08 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=sender:date:from:to:cc:subject:message-id:references:mime-version :content-disposition:in-reply-to:user-agent; bh=nVrBg4JsOpbFYG1Yf3rHxfe6D9hGlR+3olkIkyL72K4=; b=nfhOYsGxX+0d+ssldDQGOE8cF7plPXGnlbg8E8m6Aj0jvPtZY1lUy16l7mcNqG3+mf hVDHD/8Mje4cjGq4H3KDdypOUkDj2BDVfDa7t+1BZHeyVgRZ+a47Kj7zQapmXMmzMtqb ftr9vBQVkrAgwW6x9OTH9vNrcMzj11J1cT+HzfqJCboQn0fTt2eXn6UsjmA93D8XXvs6 hMErGMcB8FMtv1NW+33RBsvMxK5KPomXs4dEkwrjXZdeTi5UQ0M8/SeiTGj7R4DWF1fD 8EVQ1GfzbzbJGdrQlFWDiDgm2Rt90HiNsi0S1fXiI2AVUf9EKJRSqkCaLYGhlLytwWnk ZCNA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:sender:date:from:to:cc:subject:message-id :references:mime-version:content-disposition:in-reply-to:user-agent; bh=nVrBg4JsOpbFYG1Yf3rHxfe6D9hGlR+3olkIkyL72K4=; b=by5M1ObCe7DlzvP5r4BO7vbg5izbcYZK5qwOyr7BLo6o/+sTBzTReMgDvjXVnpnx4x E7X4fweRFVhSYKOM0dW/oJtn61/cT9Xn0dfBCmI4zHr6rZ9qtjOIsaDdQRHSdgjJsR2O gXlgM5cXTiIzCGwnpwbVugWO88qXiXfeJoORddUbVT9IL+oyEeLOBFZ8EeNKl0BHBIMV 93DdjkRsynhKZyT8hgdxjMwvw7eeXdm1nB2fC/rRiDJHf7TVBb4BFixkQmaUIvI3i88Z Hpt9W1qRyjIWXCkXygI986gBmNEwLq3sH5E0KQu/X3+2P7XzwuJ2yHNKE09GcBu2J1QI RE7g== X-Gm-Message-State: APjAAAX1VbSUuLhFuOx7+b9HbQZOEsB8k9iFC3Vs18PDbTM9ZvF1I3cp 2CvkocRXE69+xPjx2//bURha42Jn X-Google-Smtp-Source: APXvYqxKC5M+jtjIjH553NvL9nJNeeWhAxmGm4n2yWUZCGfz1nLpUyKbhcK/xnd7z/Ay10MvHusFoA== X-Received: by 2002:a63:1045:: with SMTP id 5mr31317473pgq.165.1569954847324; Tue, 01 Oct 2019 11:34:07 -0700 (PDT) Received: from localhost ([2600:1700:e321:62f0:329c:23ff:fee3:9d7c]) by smtp.gmail.com with ESMTPSA id 71sm20989059pfw.147.2019.10.01.11.34.05 (version=TLS1_2 cipher=ECDHE-RSA-CHACHA20-POLY1305 bits=256/256); Tue, 01 Oct 2019 11:34:06 -0700 (PDT) Date: Tue, 1 Oct 2019 11:34:04 -0700 From: Guenter Roeck To: "Tremblay, Eric" Cc: "linux-hwmon@vger.kernel.org" Subject: Re: [PATCH v2 1/2] hwmon: Add driver for Texas Instruments TMP512/513 sensor chips Message-ID: <20191001183404.GA23564@roeck-us.net> References: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.9.4 (2018-02-28) Sender: linux-hwmon-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-hwmon@vger.kernel.org On Tue, Oct 01, 2019 at 05:49:52PM +0000, Tremblay, Eric wrote: > hwmon: Add driver for Texas Instruments TMP512/513 sensor > > TI's TMP512/513 are I2C/SMBus system monitor chips. These chips > monitor the supply voltage, supply current, power consumption > and provide one local and up to three (TMP513) remote temperature sensors. > > It has been tested using a TI TMP513 development kit (TMP513EVM) > > Signed-off-by: Eric Tremblay > --- > Documentation/hwmon/tmp513.rst | 98 ++++ > MAINTAINERS | 7 + > drivers/hwmon/Kconfig | 10 + > drivers/hwmon/Makefile | 1 + > drivers/hwmon/tmp513.c | 800 +++++++++++++++++++++++++++++++++ > 5 files changed, 916 insertions(+) > create mode 100644 Documentation/hwmon/tmp513.rst > create mode 100644 drivers/hwmon/tmp513.c > > diff --git a/Documentation/hwmon/tmp513.rst b/Documentation/hwmon/tmp513.rst > new file mode 100644 > index 000000000000..3ba6f6f14220 > --- /dev/null > +++ b/Documentation/hwmon/tmp513.rst > @@ -0,0 +1,98 @@ > +.. SPDX-License-Identifier: GPL-2.0 > +Kernel driver tmp513 > +==================== > + > +Supported chips: > + > + * Texas Instruments TMP512 > + > + Prefix: 'tmp512' > + > + Datasheet: http://www.ti.com/lit/ds/symlink/tmp512.pdf > + > + * Texas Instruments TMP513 > + > + Prefix: 'tmp513' > + > + Datasheet: http://www.ti.com/lit/ds/symlink/tmp513.pdf > + > +Authors: > + > + Eric Tremblay > + > +Description > +----------- > + > +This driver implements support for Texas Instruments TMP512, and TMP513 > +temperature and power supply sensor chips. These chips implement one > +local and up to three (TMP513) temperature sensors. The chips also implement > +power supply monitoring such as shunt voltage, shunt current, bus voltage > +and power consumption. > + > +The temperatures are measured in degrees Celsius with a range of > +-40 to + 125 degress Celcius with a resolution of 0.0625 degree C. > + > +The driver exports the temperature values via the following sysfs files: > + > +**temp[1-4]_input** > + > +**temp[1-4]_crit** > + > +**temp[1-4]_crit_alarm** > + > +The shunt voltage is measured in micro volts. There are four configurable > +range: 320mV, 160mV, 80mV and 40mV all of them with a resolution of 10 uV. > +The range depends on the pga gain specified in the device tree > +with "pga-gain" (default to 8). The range will be equal to pga gain > +multiply by 40mV. > + > +The driver exports the shunt voltage values via the following sysFs files: > + > +**in0_input** > + > +**in0_lcrit** > + > +**in0_lcrit_alarm** > + > +**in0_crit** > + > +**in0_crit_alarm** > + > +The bus voltage is measured in milli volts. There are two configuable > +range: 32V and 16V both with a resolution of 4mV. It can be configured in the > +device tree with "bus-voltage-range" (default to 32V); > + > +The driver exports the bus voltage values via the following sysFs files: > + > +**in0_input** > + > +**in0_lcrit** > + > +**in0_lcrit_alarm** > + > +**in0_crit** > + > +**in0_crit_alarm** > + > +The power and the currents range and resolution depends on the calibration > +register value. Those values are calculate by the hardware using those > +formula: > + > +Current = (ShuntVoltage * CalibrationRegister) / 4096 > +Power = (Current * BusVoltage) / 5000 > + > +The driver exports the current and power values via the following sysFs files: > + > +**curr0_input** > + > +**power1_input** > + > +**power1_crit** > + > +**power1_crit_alarm** > + > +The calibration process follow the procedure of the datasheet (without overflow) > +and depend on the shunt resistor value, needed in the device tree "shunt-resistor-mohm". > +It also depends on the pga gain and the maximum expected current, also specified from > +the device tree "max-expected-current-ma". If not specified it default to the maximum > +possible current depending on the pga gain. > diff --git a/MAINTAINERS b/MAINTAINERS > index 296de2b51c83..1d13e5be6661 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -16369,6 +16369,13 @@ S: Maintained > F: Documentation/hwmon/tmp401.rst > F: drivers/hwmon/tmp401.c > > +TMP513 HARDWARE MONITOR DRIVER > +M: Eric Tremblay > +L: linux-hwmon@vger.kernel.org > +S: Maintained > +F: Documentation/hwmon/tmp513.rst > +F: drivers/hwmon/tmp513.c > + > TMPFS (SHMEM FILESYSTEM) > M: Hugh Dickins > L: linux-mm@kvack.org > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig > index 13a6b4afb4b3..926e3c98dbdf 100644 > --- a/drivers/hwmon/Kconfig > +++ b/drivers/hwmon/Kconfig > @@ -1709,6 +1709,16 @@ config SENSORS_TMP421 > This driver can also be built as a module. If so, the module > will be called tmp421. > > +config SENSORS_TMP513 > + tristate "Texas Instruments TMP513 and compatibles" > + depends on I2C > + help > + If you say yes here you get support for Texas Instruments TMP512, > + and TMP513 temperature and power supply sensor chips. > + > + This driver can also be built as a module. If so, the module > + will be called tmp513. > + > config SENSORS_VEXPRESS > tristate "Versatile Express" > depends on VEXPRESS_CONFIG > diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile > index 40c036ea45e6..762642291914 100644 > --- a/drivers/hwmon/Makefile > +++ b/drivers/hwmon/Makefile > @@ -166,6 +166,7 @@ obj-$(CONFIG_SENSORS_TMP103) += tmp103.o > obj-$(CONFIG_SENSORS_TMP108) += tmp108.o > obj-$(CONFIG_SENSORS_TMP401) += tmp401.o > obj-$(CONFIG_SENSORS_TMP421) += tmp421.o > +obj-$(CONFIG_SENSORS_TMP513) += tmp513.o > obj-$(CONFIG_SENSORS_VEXPRESS) += vexpress-hwmon.o > obj-$(CONFIG_SENSORS_VIA_CPUTEMP)+= via-cputemp.o > obj-$(CONFIG_SENSORS_VIA686A) += via686a.o > diff --git a/drivers/hwmon/tmp513.c b/drivers/hwmon/tmp513.c > new file mode 100644 > index 000000000000..0575a6237460 > --- /dev/null > +++ b/drivers/hwmon/tmp513.c > @@ -0,0 +1,800 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Driver for Texas Instruments TMP512, TMP513 power monitor chips > + * > + * TMP513: > + * Thermal/Power Management with Triple Remote and > + * Local Temperature Sensor and Current Shunt Monitor > + * Datasheet: http://www.ti.com/lit/gpn/tmp513 > + * > + * TMP512: > + * Thermal/Power Management with Dual Remote > + * and Local Temperature Sensor and Current Shunt Monitor > + * Datasheet: http://www.ti.com/lit/gpn/tmp512 > + * > + * Copyright (C) 2019 Eric Tremblay > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; version 2 of the License. > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +// common register definition > +#define TMP51X_SHUNT_CONFIG 0x00 > +#define TMP51X_TEMP_CONFIG 0x01 > +#define TMP51X_STATUS 0x02 > +#define TMP51X_SMBUS_ALERT 0x03 > +#define TMP51X_SHUNT_VOLTAGE_RESULT 0x04 > +#define TMP51X_BUS_VOLTAGE_RESULT 0x05 > +#define TMP51X_POWER_RESULT 0x06 > +#define TMP51X_SHUNT_CURRENT_RESULT 0x07 > +#define TMP51X_LOCAL_TEMP_RESULT 0x08 > +#define TMP51X_REMOTE_TEMP_RESULT_1 0x09 > +#define TMP51X_REMOTE_TEMP_RESULT_2 0x0A > +#define TMP51X_SHUNT_VOLTAGE_H_LIMIT 0x0C > +#define TMP51X_SHUNT_VOLTAGE_L_LIMIT 0x0D > +#define TMP51X_BUS_VOLTAGE_H_LIMIT 0x0E > +#define TMP51X_BUS_VOLTAGE_L_LIMIT 0x0F > +#define TMP51X_POWER_LIMIT 0x10 > +#define TMP51X_LOCAL_TEMP_LIMIT 0x11 > +#define TMP51X_REMOTE_TEMP_LIMIT_1 0x12 > +#define TMP51X_REMOTE_TEMP_LIMIT_2 0x13 > +#define TMP51X_SHUNT_CALIBRATION 0x15 > +#define TMP51X_N_FACTOR_AND_HYST_1 0x16 > +#define TMP51X_N_FACTOR_2 0x17 > +#define TMP51X_MAN_ID_REG 0xFE > +#define TMP51X_DEVICE_ID_REG 0xFF > + > +// TMP513 specific register definition > +#define TMP513_REMOTE_TEMP_RESULT_3 0x0B > +#define TMP513_REMOTE_TEMP_LIMIT_3 0x14 > +#define TMP513_N_FACTOR_3 0x18 > + > +// Common attrs, and NULL > +#define TMP51X_MANUFACTURER_ID 0x55FF > + > +#define TMP512_DEVICE_ID 0x22FF > +#define TMP513_DEVICE_ID 0x23FF > + > +// Default config > +#define TMP51X_SHUNT_CONFIG_DEFAULT 0x399F > +#define TMP51X_TEMP_LIMIT_DEFAULT 0x2A80 > +#define TMP51X_MAX_REGISTER_ADDR 0xFF > + > +#define TMP512_TEMP_CONFIG_DEFAULT 0xBF80 > +#define TMP513_TEMP_CONFIG_DEFAULT 0xFF80 > + > +// Mask and shift > +#define CURRENT_SENSE_VOLTAGE_320_MASK 0x1800 > +#define CURRENT_SENSE_VOLTAGE_160_MASK 0x1000 > +#define CURRENT_SENSE_VOLTAGE_80_MASK 0x0800 > +#define CURRENT_SENSE_VOLTAGE_40_MASK 0 > + > +#define TMP51X_BUS_VOLTAGE_MASK 0x2000 > +#define TMP51X_PGA_MASK 0x1800 > +#define TMP51X_N_FACTOR_MASK 0xFF00 > +#define TMP51X_HYST_MASK 0x00FF > + > +#define TMP51X_BUS_VOLTAGE_SHIFT 3 > +#define TMP51X_TEMP_SHIFT 3 > + > +// Alarms > +#define TMP51X_SHUNT_VOLTAGE_H_LIMIT_POS 15 > +#define TMP51X_SHUNT_VOLTAGE_L_LIMIT_POS 14 > +#define TMP51X_BUS_VOLTAGE_H_LIMIT_POS 13 > +#define TMP51X_BUS_VOLTAGE_L_LIMIT_POS 12 > +#define TMP51X_POWER_LIMIT_POS 11 > +#define TMP51X_LOCAL_TEMP_LIMIT_POS 10 > +#define TMP51X_REMOTE_TEMP_LIMIT_1_POS 9 > +#define TMP51X_REMOTE_TEMP_LIMIT_2_POS 8 > +#define TMP513_REMOTE_TEMP_LIMIT_3_POS 7 > + > +// Value type for register with more than one value > +#define TMP51X_N_FACTOR_ELEM 0 > +#define TMP51X_HYST_ELEM 1 > + > +static const u8 TMP51X_TEMP_INPUT[4] = { > + TMP51X_LOCAL_TEMP_RESULT, > + TMP51X_REMOTE_TEMP_RESULT_1, > + TMP51X_REMOTE_TEMP_RESULT_2, > + TMP513_REMOTE_TEMP_RESULT_3 > +}; > + > +static const u8 TMP51X_TEMP_CRIT[4] = { > + TMP51X_LOCAL_TEMP_LIMIT, > + TMP51X_REMOTE_TEMP_LIMIT_1, > + TMP51X_REMOTE_TEMP_LIMIT_2, > + TMP513_REMOTE_TEMP_LIMIT_3 > +}; > + > +static const u8 TMP51X_TEMP_CRIT_ALARM[4] = { > + TMP51X_LOCAL_TEMP_LIMIT_POS, > + TMP51X_REMOTE_TEMP_LIMIT_1_POS, > + TMP51X_REMOTE_TEMP_LIMIT_2_POS, > + TMP513_REMOTE_TEMP_LIMIT_3_POS > +}; > + > +static const u8 TMP51X_IN_INPUT[2] = { > + TMP51X_SHUNT_VOLTAGE_RESULT, > + TMP51X_BUS_VOLTAGE_RESULT > +}; > + > +static const u8 TMP51X_IN_CRIT[2] = { > + TMP51X_SHUNT_VOLTAGE_H_LIMIT, > + TMP51X_BUS_VOLTAGE_H_LIMIT > +}; > + > +static const u8 TMP51X_IN_LCRIT[2] = { > + TMP51X_SHUNT_VOLTAGE_L_LIMIT, > + TMP51X_BUS_VOLTAGE_L_LIMIT > +}; > + > +static const u8 TMP51X_IN_CRIT_ALARM[2] = { > + TMP51X_SHUNT_VOLTAGE_H_LIMIT_POS, > + TMP51X_BUS_VOLTAGE_H_LIMIT_POS > +}; > + > +static const u8 TMP51X_IN_LCRIT_ALARM[2] = { > + TMP51X_SHUNT_VOLTAGE_L_LIMIT_POS, > + TMP51X_BUS_VOLTAGE_L_LIMIT_POS > +}; > + > +static const u8 TMP51X_CURR_INPUT[1] = { > + TMP51X_SHUNT_CURRENT_RESULT > +}; > + > +static const u8 TMP51X_POWER_INPUT[1] = { > + TMP51X_POWER_RESULT > +}; > + > +static const u8 TMP51X_POWER_CRIT[1] = { > + TMP51X_POWER_LIMIT > +}; > + > +static const u8 TMP51X_POWER_CRIT_ALARM[1] = { > + TMP51X_POWER_LIMIT_POS > +}; > + > + > +static struct regmap_config tmp51x_regmap_config = { > + .reg_bits = 8, > + .val_bits = 16, > +}; > + > +enum tmp51x_ids { > + tmp512, tmp513 > +}; > + > +struct tmp51x_config { > + u16 shunt_config; > + u8 pga_shift; > + u16 pga_gain; > + u32 rshunt; > + s32 max_curr_ma; > + > + u16 temp_config; > + > + u8 temp_hyst; > + u8 temp2_nfactor; > + u8 temp3_nfactor; > + u8 temp4_nfactor; > + > + u32 curr_lsb; > + u32 pwr_lsb; > + u8 registers; > +}; > + > +struct tmp51x_data { > + struct tmp51x_config *config; > + enum tmp51x_ids id; > + struct regmap *regmap; > + struct mutex config_lock; > +}; > + > +static struct tmp51x_config tmp51x_config[] = { > + [tmp512] = { > + .shunt_config = TMP51X_SHUNT_CONFIG_DEFAULT, > + .pga_shift = 1, > + .pga_gain = 8, > + .temp_config = TMP512_TEMP_CONFIG_DEFAULT, > + .registers = TMP51X_MAX_REGISTER_ADDR, > + }, > + [tmp513] = { > + .shunt_config = TMP51X_SHUNT_CONFIG_DEFAULT, > + .pga_shift = 1, > + .pga_gain = 8, > + .temp_config = TMP513_TEMP_CONFIG_DEFAULT, > + .registers = TMP51X_MAX_REGISTER_ADDR, > + }, > +}; > + > +static long tmp51x_get_value(struct device *dev, u8 reg, u8 pos, > + unsigned int regval) > +{ > + struct tmp51x_data *data = dev_get_drvdata(dev); > + struct tmp51x_config *config = data->config; > + long val; > + > + switch (reg) { > + case TMP51X_STATUS: > + val = (regval >> pos) & 1; > + break; > + case TMP51X_SHUNT_CALIBRATION: > + val = regval; > + break; > + case TMP51X_SHUNT_VOLTAGE_RESULT: > + case TMP51X_SHUNT_VOLTAGE_H_LIMIT: > + case TMP51X_SHUNT_VOLTAGE_L_LIMIT: > + /* > + * 2's compliment number shifted by one to four depending > + * on the pga gain setting. > + * 1lsb = 10uV > + */ > + val = sign_extend32(regval, 16 - config->pga_shift); > + val = DIV_ROUND_CLOSEST(val, 100); > + break; > + case TMP51X_BUS_VOLTAGE_RESULT: > + case TMP51X_BUS_VOLTAGE_H_LIMIT: > + case TMP51X_BUS_VOLTAGE_L_LIMIT: > + // 1lsb = 4uV > + val = (regval >> TMP51X_BUS_VOLTAGE_SHIFT) * 4; > + break; > + case TMP51X_POWER_RESULT: > + case TMP51X_POWER_LIMIT: > + // Power = (current * BusVoltage) / 5000 > + val = regval * config->pwr_lsb; > + break; > + case TMP51X_SHUNT_CURRENT_RESULT: > + // Current = (ShuntVoltage * CalibrationRegister) / 4096 > + val = sign_extend32(regval, 15) * config->curr_lsb; > + break; > + case TMP51X_LOCAL_TEMP_RESULT: > + case TMP51X_REMOTE_TEMP_RESULT_1: > + case TMP51X_REMOTE_TEMP_RESULT_2: > + case TMP513_REMOTE_TEMP_RESULT_3: > + case TMP51X_LOCAL_TEMP_LIMIT: > + case TMP51X_REMOTE_TEMP_LIMIT_1: > + case TMP51X_REMOTE_TEMP_LIMIT_2: > + case TMP513_REMOTE_TEMP_LIMIT_3: > + // 1lsb = 0.0625 degrees centigrade > + val = DIV_ROUND_CLOSEST((regval >> TMP51X_TEMP_SHIFT) * 625, > + 10); > + break; > + default: > + // Programmer goofed > + WARN_ON_ONCE(1); > + val = 0; > + break; > + } > + > + return val; > +} > + > +static int tmp51x_set_value(struct device *dev, u8 reg, long val) > +{ > + struct tmp51x_data *data = dev_get_drvdata(dev); > + struct tmp51x_config *config = data->config; > + int regval, ret; > + > + mutex_lock(&data->config_lock); > + > + switch (reg) { > + case TMP51X_SHUNT_VOLTAGE_H_LIMIT: > + case TMP51X_SHUNT_VOLTAGE_L_LIMIT: > + // 1lsb = 10uV > + regval = val * 100; > + break; > + case TMP51X_BUS_VOLTAGE_H_LIMIT: > + case TMP51X_BUS_VOLTAGE_L_LIMIT: > + // 1lsb = 4uV > + regval = DIV_ROUND_CLOSEST(val, 4) << TMP51X_BUS_VOLTAGE_SHIFT; > + break; > + case TMP51X_POWER_LIMIT: > + regval = DIV_ROUND_CLOSEST(val, config->pwr_lsb); > + break; > + case TMP51X_LOCAL_TEMP_LIMIT: > + case TMP51X_REMOTE_TEMP_LIMIT_1: > + case TMP51X_REMOTE_TEMP_LIMIT_2: > + case TMP513_REMOTE_TEMP_LIMIT_3: > + // 1lsb = 0.0625 degrees centigrade > + regval = DIV_ROUND_CLOSEST(val * 10, 625) << TMP51X_TEMP_SHIFT; > + break; > + default: > + // Programmer goofed > + WARN_ON_ONCE(1); > + regval = 0; > + break; > + } > + > + dev_dbg(dev, "write register %02X, val = 0x%04x\n", reg, regval); > + > + ret = regmap_write(data->regmap, reg, regval); > + > + mutex_unlock(&data->config_lock); > + > + return ret; > +} > + > +static int tmp51x_read_reg(struct device *dev, int reg, unsigned int *regval) > +{ > + struct tmp51x_data *data = dev_get_drvdata(dev); > + int ret; > + > + dev_dbg(dev, "Starting register %02X read\n", reg); > + > + ret = regmap_read(data->regmap, reg, regval); > + if (ret < 0) > + return ret; > + > + dev_dbg(dev, "read %02X, val = 0x%04x\n", reg, *regval); > + > + return 0; > +} > + > +static int tmp51x_read(struct device *dev, enum hwmon_sensor_types type, > + u32 attr, int channel, long *val) > +{ > + int ret; > + u32 regval; > + u8 pos = 0, reg = 0; > + > + switch (type) { > + case hwmon_temp: > + switch (attr) { > + case hwmon_temp_input: > + reg = TMP51X_TEMP_INPUT[channel]; > + break; > + case hwmon_temp_crit_alarm: > + reg = TMP51X_STATUS; > + pos = TMP51X_TEMP_CRIT_ALARM[channel]; > + break; > + case hwmon_temp_crit: > + reg = TMP51X_TEMP_CRIT[channel]; > + break; > + } > + break; > + case hwmon_in: > + switch (attr) { > + case hwmon_in_input: > + reg = TMP51X_IN_INPUT[channel]; > + break; > + case hwmon_in_lcrit_alarm: > + reg = TMP51X_STATUS; > + pos = TMP51X_IN_LCRIT_ALARM[channel]; > + break; > + case hwmon_in_crit_alarm: > + reg = TMP51X_STATUS; > + pos = TMP51X_IN_CRIT_ALARM[channel]; > + break; > + case hwmon_in_lcrit: > + reg = TMP51X_IN_LCRIT[channel]; > + break; > + case hwmon_in_crit: > + reg = TMP51X_IN_CRIT[channel]; > + break; > + } > + break; > + case hwmon_curr: > + switch (attr) { > + case hwmon_curr_input: > + reg = TMP51X_CURR_INPUT[channel]; > + break; > + } > + break; > + case hwmon_power: > + switch (attr) { > + case hwmon_power_input: > + reg = TMP51X_POWER_INPUT[channel]; > + break; > + case hwmon_power_crit_alarm: > + reg = TMP51X_STATUS; > + pos = TMP51X_POWER_CRIT_ALARM[channel]; > + break; > + case hwmon_power_crit: > + reg = TMP51X_POWER_CRIT[channel]; > + break; > + } > + break; > + default: > + break; > + } > + For consistency with the write code below, I woud suggest to add something like if (reg == 0) return -EOPNOTSUPP; > + ret = tmp51x_read_reg(dev, reg, ®val); > + if (ret < 0) > + return ret; > + > + *val = tmp51x_get_value(dev, reg, pos, regval); > + return 0; > +} > + > +static int tmp51x_write(struct device *dev, enum hwmon_sensor_types type, > + u32 attr, int channel, long val) > +{ > + u8 reg = 0; > + > + switch (type) { > + case hwmon_temp: > + switch (attr) { > + case hwmon_temp_crit: > + reg = TMP51X_TEMP_CRIT[channel]; > + break; > + } > + break; > + case hwmon_in: > + switch (attr) { > + case hwmon_in_lcrit: > + reg = TMP51X_IN_LCRIT[channel]; > + break; > + case hwmon_in_crit: > + reg = TMP51X_IN_CRIT[channel]; > + break; > + } > + break; > + case hwmon_power: > + switch (attr) { > + case hwmon_power_crit: > + reg = TMP51X_POWER_CRIT[channel]; > + break; > + } > + break; > + default: > + break; > + } > + > + if (reg != 0) > + return tmp51x_set_value(dev, reg, val); > + else > + return -EOPNOTSUPP; else after return is unnecessary. I would suggest to change to code to if (reg == 0) return -EOPNOTSUPP; return tmp51x_set_value(dev, reg, val); > +} > + > +static umode_t tmp51x_is_visible(const void *_data, > + enum hwmon_sensor_types type, u32 attr, > + int channel) > +{ > + const struct tmp51x_data *data = _data; > + > + switch (type) { > + case hwmon_temp: > + if (data->id == tmp512 && channel == 4) > + return 0; > + switch (attr) { > + case hwmon_temp_input: > + case hwmon_temp_crit_alarm: > + return 0444; > + case hwmon_temp_crit: > + return 0644; > + } > + break; > + case hwmon_in: > + switch (attr) { > + case hwmon_in_input: > + case hwmon_in_lcrit_alarm: > + case hwmon_in_crit_alarm: > + return 0444; > + case hwmon_in_lcrit: > + case hwmon_in_crit: > + return 0644; > + } > + break; > + case hwmon_curr: > + switch (attr) { > + case hwmon_curr_input: > + return 0444; > + } > + break; > + case hwmon_power: > + switch (attr) { > + case hwmon_power_input: > + case hwmon_power_crit_alarm: > + return 0444; > + case hwmon_power_crit: > + return 0644; > + } > + break; > + default: > + break; > + } > + return 0; > +} > + > +static const struct hwmon_channel_info *tmp51x_info[] = { > + HWMON_CHANNEL_INFO(temp, > + HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM, > + HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM, > + HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM, > + HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM), > + HWMON_CHANNEL_INFO(in, > + HWMON_I_INPUT | HWMON_I_LCRIT | HWMON_I_LCRIT_ALARM | > + HWMON_I_CRIT | HWMON_I_CRIT_ALARM, > + HWMON_I_INPUT | HWMON_I_LCRIT | HWMON_I_LCRIT_ALARM | > + HWMON_I_CRIT | HWMON_I_CRIT_ALARM), > + HWMON_CHANNEL_INFO(curr, > + HWMON_C_INPUT), > + HWMON_CHANNEL_INFO(power, > + HWMON_P_INPUT | HWMON_P_CRIT | HWMON_P_CRIT_ALARM), > + NULL > +}; > + > +static const struct hwmon_ops tmp51x_hwmon_ops = { > + .is_visible = tmp51x_is_visible, > + .read = tmp51x_read, > + .write = tmp51x_write, > +}; > + > +static const struct hwmon_chip_info tmp51x_chip_info = { > + .ops = &tmp51x_hwmon_ops, > + .info = tmp51x_info, > +}; > + > +/* > + * Calibrate the tmp51x following the datasheet method > + */ > +static int tmp51x_calibrate(struct tmp51x_data *data) > +{ > + int rshunt = data->config->rshunt; > + int vshunt_max = data->config->pga_gain * 40; > + int val, max_curr_ma; > + > + max_curr_ma = DIV_ROUND_CLOSEST(vshunt_max * 1000 * 1000, rshunt); divide by 0 error if rshunt == 0. > + if (max_curr_ma < data->config->max_curr_ma) > + data->config->max_curr_ma = max_curr_ma; > + > + /* > + * Calculate the minimal bit resolution for the current and the power. > + * Those values will be used during register interpretation. > + */ > + data->config->curr_lsb = > + DIV_ROUND_CLOSEST(data->config->max_curr_ma * 1000, 32767); Overflow if max_curr_ma > MAXINT / 1000. > + data->config->pwr_lsb = 20 * data->config->curr_lsb; > + > + val = DIV_ROUND_CLOSEST(data->config->curr_lsb * rshunt, 1000 * 1000); Overflow if curr_lsb * rshunt + 500000 > MAXINT. > + val = DIV_ROUND_CLOSEST(40960, val); divide by 0 error if curr_lsb * rshunt < 500000. > + > + return regmap_write(data->regmap, TMP51X_SHUNT_CALIBRATION, val); > +} > + > +/* > + * Initialize the configuration and calibration registers. > + */ > +static int tmp51x_init(struct tmp51x_data *data) > +{ > + unsigned int regval; > + int ret = regmap_write(data->regmap, TMP51X_SHUNT_CONFIG, > + data->config->shunt_config); > + if (ret < 0) > + return ret; > + > + ret = regmap_write(data->regmap, TMP51X_TEMP_CONFIG, > + data->config->temp_config); > + if (ret < 0) > + return ret; > + > + // nFactor 1 and hysteresis configuration > + regval = (data->config->temp2_nfactor << 8) & data->config->temp_hyst; Sure that is supposed to be "&" and not "|" ? > + ret = regmap_write(data->regmap, TMP51X_N_FACTOR_AND_HYST_1, regval); > + if (ret < 0) > + return ret; > + > + // nFactor 2 and 3 configuration > + ret = regmap_write(data->regmap, TMP51X_N_FACTOR_2, > + data->config->temp3_nfactor << 8); > + if (ret < 0) > + return ret; > + > + if (data->id == tmp513) { > + ret = regmap_write(data->regmap, TMP513_N_FACTOR_3, > + data->config->temp3_nfactor << 8); > + if (ret < 0) > + return ret; > + } > + > + ret = tmp51x_calibrate(data); > + if (ret < 0) > + return ret; > + > + // Read the status register before using as the datasheet propose > + ret = regmap_read(data->regmap, TMP51X_STATUS, ®val); > + if (ret < 0) > + return ret; > + > + return 0; > +} > + > +static const struct i2c_device_id tmp51x_id[] = { > + { "tmp512", tmp512 }, > + { "tmp513", tmp513 }, > + { } > +}; > +MODULE_DEVICE_TABLE(i2c, tmp51x_id); > + > +static const struct of_device_id tmp51x_of_match[] = { > + { > + .compatible = "ti,tmp512", > + .data = (void *)tmp512 > + }, > + { > + .compatible = "ti,tmp513", > + .data = (void *)tmp513 > + }, > + { }, > +}; > +MODULE_DEVICE_TABLE(of, tmp51x_of_match); > + > +static int tmp51x_vbus_max_to_reg(struct tmp51x_config *config, u32 vbus_max) > +{ > + if (vbus_max == 32) > + config->shunt_config |= TMP51X_BUS_VOLTAGE_MASK; > + else if (vbus_max == 16) > + config->shunt_config &= ~TMP51X_BUS_VOLTAGE_MASK; > + else > + return -EINVAL; > + return 0; > +} > + > +static int tmp51x_pga_gain_to_reg(struct tmp51x_config *config, u32 pga_gain) > +{ > + config->shunt_config &= ~TMP51X_PGA_MASK; > + config->pga_gain = pga_gain; > + > + // The shift depend on the gain 8=4, 4=3, 2=2, 1=1 > + config->pga_shift = 5 - ffs(pga_gain); > + > + if (pga_gain == 8) > + config->shunt_config |= CURRENT_SENSE_VOLTAGE_320_MASK; > + else if (pga_gain == 4) > + config->shunt_config |= CURRENT_SENSE_VOLTAGE_160_MASK; > + else if (pga_gain == 2) > + config->shunt_config |= CURRENT_SENSE_VOLTAGE_80_MASK; > + else if (pga_gain == 1) > + config->shunt_config |= CURRENT_SENSE_VOLTAGE_40_MASK; > + else > + return -EINVAL; > + return 0; > +} > + > +static int tmp51x_parse_device_tree(struct device *dev, > + struct tmp51x_data *data) > +{ > + int ret; > + u32 val; > + > + // Mandatory fields > + ret = of_property_read_u32(dev->of_node, "shunt-resistor-uohm", &val); > + if (ret < 0) > + return -ENODEV; > + data->config->rshunt = val; There is no value range check. rshunt == 0 will result in a divide error. > + > + // Optional fields > + ret = of_property_read_u32(dev->of_node, "bus-voltage-range", &val); > + if (ret >= 0) { > + ret = tmp51x_vbus_max_to_reg(data->config, val); > + if (ret < 0) > + return ret; > + } > + > + ret = of_property_read_u32(dev->of_node, "pga-gain", &val); > + if (ret >= 0) { > + ret = tmp51x_pga_gain_to_reg(data->config, val); > + if (ret < 0) > + return ret; > + } > + > + ret = of_property_read_u32(dev->of_node, "max-expected-current-ma", > + &val); > + if (ret >= 0) > + data->config->max_curr_ma = val; > + > + ret = of_property_read_u32(dev->of_node, "temp_hysteresis", &val); > + if (ret >= 0) { > + if (val > 0xFF) > + return -EINVAL; > + data->config->temp_hyst = val; > + } > + > + ret = of_property_read_u32(dev->of_node, "temp_2_nfactor", &val); > + if (ret >= 0) { > + if (val > 0xFF) > + return -EINVAL; > + data->config->temp2_nfactor = val; > + } > + > + ret = of_property_read_u32(dev->of_node, "temp_3_nfactor", &val); > + if (ret >= 0) { > + if (val > 0xFF) > + return -EINVAL; > + data->config->temp3_nfactor = val; > + } > + > + if (data->id == tmp513) { > + ret = of_property_read_u32(dev->of_node, "temp_4_nfactor", > + &val); > + if (ret >= 0) { > + if (val > 0xFF) > + return -EINVAL; > + data->config->temp4_nfactor = val; > + } > + } > + > + return 0; > +} > + > +static int tmp51x_probe(struct i2c_client *client, > + const struct i2c_device_id *id) > +{ > + struct device *dev = &client->dev; > + struct tmp51x_data *data; > + struct device *hwmon_dev; > + int ret; > + enum tmp51x_ids chip; > + > + if (client->dev.of_node) > + chip = (enum tmp51x_ids)of_device_get_match_data(&client->dev); > + else > + return -ENODEV; Are you sure you only want to support devicetree based systems ? We can of course change that later if needed, it just seems like an unnecessary restriction. Also, if you don't want to accept i2c_device_id based probes, why provide id_table below in the first place ? > + > + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); > + if (!data) > + return -ENOMEM; > + > + data->config = &tmp51x_config[chip]; > + data->id = chip; > + mutex_init(&data->config_lock); > + > + ret = tmp51x_parse_device_tree(dev, data); > + if (ret < 0) { > + dev_err(dev, "error configuring the device: %d\n", ret); > + return ret; > + } > + > + tmp51x_regmap_config.max_register = data->config->registers; > + data->regmap = devm_regmap_init_i2c(client, &tmp51x_regmap_config); > + if (IS_ERR(data->regmap)) { > + dev_err(dev, "failed to allocate register map\n"); > + return PTR_ERR(data->regmap); > + } > + > + ret = tmp51x_init(data); > + if (ret < 0) { > + dev_err(dev, "error configuring the device: %d\n", ret); > + return -ENODEV; > + } > + > + hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, > + data, > + &tmp51x_chip_info, > + NULL); > + if (IS_ERR(hwmon_dev)) > + return PTR_ERR(hwmon_dev); > + > + dev_dbg(dev, "power monitor %s\n", id->name); > + > + return 0; > +} > + > +static struct i2c_driver tmp51x_driver = { > + .driver = { > + .name = "tmp51x", > + .of_match_table = of_match_ptr(tmp51x_of_match), > + }, > + .probe = tmp51x_probe, > + .id_table = tmp51x_id, > +}; > + > +module_i2c_driver(tmp51x_driver); > + > +MODULE_AUTHOR("Eric Tremblay "); > +MODULE_DESCRIPTION("tmp51x driver"); > +MODULE_LICENSE("GPL"); > -- > 2.17.1 >