From: Jonathan Corbet <corbet@lwn.net>
To: "Nuno Sá" <nuno.sa@analog.com>
Cc: <linux-hwmon@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-doc@vger.kernel.org>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Guenter Roeck <linux@roeck-us.net>,
Jean Delvare <jdelvare@suse.com>
Subject: Re: [PATCH v2 1/2] hwmon: Add support for ltc2947
Date: Fri, 11 Oct 2019 08:30:48 -0600 [thread overview]
Message-ID: <20191011083048.4fa39734@lwn.net> (raw)
In-Reply-To: <20191011114853.159327-1-nuno.sa@analog.com>
On Fri, 11 Oct 2019 13:48:52 +0200
Nuno Sá <nuno.sa@analog.com> wrote:
> The ltc2947 is a high precision power and energy monitor with an
> internal sense resistor supporting up to +/- 30A. Three internal no
> Latency ADCs ensure accurate measurement of voltage and current, while
> high-bandwidth analog multiplication of voltage and current provides
> accurate power measurement in a wide range of applications. Internal or
> external clocking options enable precise charge and energy measurements.
>
> Signed-off-by: Nuno Sá <nuno.sa@analog.com>
[...]
> diff --git a/Documentation/hwmon/ltc2947.rst b/Documentation/hwmon/ltc2947.rst
> new file mode 100644
> index 000000000000..05df19775fb3
> --- /dev/null
> +++ b/Documentation/hwmon/ltc2947.rst
So this file has a .rst extension, but it's not actually a restructured
text file. It will add a bunch of warnings during the docs build. The
good news is that fixing it up will not be hard; see Documention/doc-guide
if need be.
Thanks,
jon
next prev parent reply other threads:[~2019-10-11 14:30 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-11 11:48 [PATCH v2 1/2] hwmon: Add support for ltc2947 Nuno Sá
2019-10-11 11:48 ` [PATCH v2 2/2] dt-bindings: hwmon: Add ltc2947 documentation Nuno Sá
2019-10-14 18:14 ` Rob Herring
2019-10-11 14:30 ` Jonathan Corbet [this message]
2019-10-20 16:21 ` [PATCH v2 1/2] hwmon: Add support for ltc2947 Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191011083048.4fa39734@lwn.net \
--to=corbet@lwn.net \
--cc=devicetree@vger.kernel.org \
--cc=jdelvare@suse.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=mark.rutland@arm.com \
--cc=nuno.sa@analog.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).