Linux-Hwmon Archive on lore.kernel.org
 help / color / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: "Nuno Sá" <nuno.sa@analog.com>
Cc: linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org,
	Jean Delvare <jdelvare@suse.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>
Subject: Re: [PATCH v2 2/2] dt-bindings: hwmon: Add AXI FAN Control documentation
Date: Sun, 20 Oct 2019 09:12:56 -0700
Message-ID: <20191020161256.GA27823@roeck-us.net> (raw)
In-Reply-To: <20191009102806.262241-2-nuno.sa@analog.com>

On Wed, Oct 09, 2019 at 12:28:06PM +0200, Nuno Sá wrote:
> Document the AXI FAN Control IP core devicetree bindings.
> 
> Signed-off-by: Nuno Sá <nuno.sa@analog.com>
> Reviewed-by: Rob Herring <robh@kernel.org>

Applied to hwmon-next.

Thanks,
Guenter

> ---
> Changes in v2:
>  * Set the correct license for new bindings;
>  * Fix wrong compatible in the example;
>  * Wrap long line;
>  * Update adi,pulses-per-revolution with accepted values.
> 
>  .../bindings/hwmon/adi,axi-fan-control.yaml   | 62 +++++++++++++++++++
>  MAINTAINERS                                   |  1 +
>  2 files changed, 63 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
> 
> diff --git a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
> new file mode 100644
> index 000000000000..dc82b9748c9d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
> @@ -0,0 +1,62 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright 2019 Analog Devices Inc.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/bindings/hwmon/adi,axi-fan-control.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices AXI FAN Control Device Tree Bindings
> +
> +maintainers:
> +  - Nuno Sá <nuno.sa@analog.com>
> +
> +description: |+
> +  Bindings for the Analog Devices AXI FAN Control driver. Spefications of the
> +  core can be found in:
> +
> +  https://wiki.analog.com/resources/fpga/docs/axi_fan_control
> +
> +properties:
> +  compatible:
> +    enum:
> +        - adi,axi-fan-control-1.00.a
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  adi,pulses-per-revolution:
> +    description:
> +      Value specifying the number of pulses per revolution of the controlled
> +      FAN.
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [1, 2, 4]
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - interrupts
> +  - adi,pulses-per-revolution
> +
> +examples:
> +  - |
> +    fpga_axi: fpga-axi@0 {
> +            #address-cells = <0x2>;
> +            #size-cells = <0x1>;
> +
> +            axi_fan_control: axi-fan-control@80000000 {
> +                    compatible = "adi,axi-fan-control-1.00.a";
> +                    reg = <0x0 0x80000000 0x10000>;
> +                    clocks = <&clk 71>;
> +                    interrupts = <0 110 0>;
> +                    adi,pulses-per-revolution = <2>;
> +            };
> +    };
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index caa80ae1925e..74ddcb3e1fd9 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2879,6 +2879,7 @@ W:	http://ez.analog.com/community/linux-device-drivers
>  L:	linux-hwmon@vger.kernel.org
>  S:	Supported
>  F:	drivers/hwmon/axi-fan-control.c
> +F:	Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
>  
>  AXXIA I2C CONTROLLER
>  M:	Krzysztof Adamski <krzysztof.adamski@nokia.com>

  parent reply index

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-09 10:28 [PATCH v2 1/2] hwmon: Support ADI Fan Control IP Nuno Sá
2019-10-09 10:28 ` [PATCH v2 2/2] dt-bindings: hwmon: Add AXI FAN Control documentation Nuno Sá
2019-10-11 16:59   ` Rob Herring
2019-10-20 16:12   ` Guenter Roeck [this message]
2019-10-20 16:12 ` [PATCH v2 1/2] hwmon: Support ADI Fan Control IP Guenter Roeck

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191020161256.GA27823@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=devicetree@vger.kernel.org \
    --cc=jdelvare@suse.com \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=nuno.sa@analog.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Hwmon Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-hwmon/0 linux-hwmon/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-hwmon linux-hwmon/ https://lore.kernel.org/linux-hwmon \
		linux-hwmon@vger.kernel.org
	public-inbox-index linux-hwmon

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-hwmon


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git