Linux-Hwmon Archive on
 help / color / Atom feed
* [RFC] hwmon: add support for IT8686E to it87.c
@ 2019-11-30  2:11 Corey Ashford
  2019-11-30  4:17 ` Guenter Roeck
  0 siblings, 1 reply; 11+ messages in thread
From: Corey Ashford @ 2019-11-30  2:11 UTC (permalink / raw)
  To: linux-hwmon, Jean Delvare

Hello folks.  I am running a newly-built system that uses an IT8686E
chip.  Currently, the latest kernel from doesn't have code
in drivers/hwmon/it87.c to support it, however, I found some source on
the net which has added support for quite a few more variants of that
brand of Super I/O chip:
I tried it out by building the module and "insmod"ing it into my
running system, and it appears to work fine.

It seems the original developer had a difficult time pushing the
changes upstream, so he abandoned the project.

My thought was that I could add support for just the IT8686E chip as a
single patch, and since I can test it locally I would have a better
chance of getting the patch accepted.  The changes to the source at
the above git tree have quite a number of changes that aren't really
necessary for supporting the IT8686E chip, so I think the patch could
be pretty small, but will still credit the original author.

What are your thoughts on this?  Is there a better path to go?

Thanks for your consideration,

- Corey

^ permalink raw reply	[flat|nested] 11+ messages in thread

end of thread, back to index

Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-30  2:11 [RFC] hwmon: add support for IT8686E to it87.c Corey Ashford
2019-11-30  4:17 ` Guenter Roeck
2019-11-30  4:48   ` Corey Ashford
2019-12-02 14:32     ` Guenter Roeck
2019-12-02 17:07       ` Corey Ashford
2019-12-02 17:52         ` Guenter Roeck
2019-12-02 22:33           ` Corey Ashford
2019-12-02 23:09             ` Guenter Roeck
2019-12-03  0:39               ` Corey Ashford
2019-12-11 11:34                 ` Reimundo Heluani
2019-12-11 17:19                   ` Guenter Roeck

Linux-Hwmon Archive on

Archives are clonable:
	git clone --mirror linux-hwmon/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-hwmon linux-hwmon/ \
	public-inbox-index linux-hwmon

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone