Linux-Hwmon Archive on lore.kernel.org
 help / color / Atom feed
From: Rob Herring <robh@kernel.org>
To: Jim Wright <wrightj@linux.vnet.ibm.com>
Cc: jdelvare@suse.com, linux@roeck-us.net, mark.rutland@arm.com,
	corbet@lwn.net, linux-hwmon@vger.kernel.org,
	devicetree@vger.kernel.org, linux-doc@vger.kernel.org,
	linux-kernel@vger.kernel.org, Jim Wright <jlwright@us.ibm.com>
Subject: Re: [PATCH 1/2] dt-bindings: hwmon/pmbus: Add UCD90320 power sequencer
Date: Wed, 4 Dec 2019 16:59:01 -0600
Message-ID: <20191204225901.GA20804@bogus> (raw)
In-Reply-To: <20191122222542.29661-2-wrightj@linux.vnet.ibm.com>

On Fri, Nov 22, 2019 at 04:25:41PM -0600, Jim Wright wrote:
> From: Jim Wright <jlwright@us.ibm.com>
> 
> Document the UCD90320 device tree binding.
> 
> Signed-off-by: Jim Wright <jlwright@us.ibm.com>
> ---
>  .../devicetree/bindings/hwmon/pmbus/ucd90320.txt    | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/hwmon/pmbus/ucd90320.txt

Can you make this a schema. See 
Documentation/devicetree/writing-schema.rst.

> 
> diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/ucd90320.txt b/Documentation/devicetree/bindings/hwmon/pmbus/ucd90320.txt
> new file mode 100644
> index 000000000000..e1c1057c6292
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/pmbus/ucd90320.txt
> @@ -0,0 +1,13 @@
> +UCD90320 power sequencer
> +-------------------------
> +
> +Requires node properties:
> +- compatible : "ti,ucd90320"
> +- reg : the I2C address of the device. This is 0x11, 0x13, 0x17, 0x31, 0x33,
> +        0x37, 0x71, 0x73, or 0x77.
> +
> +Example:
> +	ucd90320@11 {
> +		compatible = "ti,ucd90320";
> +		reg = <0x11>;
> +	};
> -- 
> 2.17.1
> 

  reply index

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-22 22:25 [PATCH 0/2] hwmon: Add UCD90320 power sequencer chip Jim Wright
2019-11-22 22:25 ` [PATCH 1/2] dt-bindings: hwmon/pmbus: Add UCD90320 power sequencer Jim Wright
2019-12-04 22:59   ` Rob Herring [this message]
2019-12-04 23:32     ` Jim Wright
2019-11-22 22:25 ` [PATCH 2/2] hwmon: Add support for UCD90320 Power Sequencer Jim Wright

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191204225901.GA20804@bogus \
    --to=robh@kernel.org \
    --cc=corbet@lwn.net \
    --cc=devicetree@vger.kernel.org \
    --cc=jdelvare@suse.com \
    --cc=jlwright@us.ibm.com \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=mark.rutland@arm.com \
    --cc=wrightj@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Hwmon Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-hwmon/0 linux-hwmon/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-hwmon linux-hwmon/ https://lore.kernel.org/linux-hwmon \
		linux-hwmon@vger.kernel.org
	public-inbox-index linux-hwmon

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-hwmon


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git