Linux-Hwmon Archive on lore.kernel.org
 help / color / Atom feed
From: Jonathan McDowell <noodles@earth.li>
To: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org, linux-kernel@vger.kernel.org,
	Ken Moffat <zarniwhoop73@googlemail.com>
Subject: Re: [PATCH v2 0/5] hwmon: k10temp driver improvements
Date: Sun, 19 Jan 2020 19:38:17 +0000
Message-ID: <20200119193817.GM15976@earth.li> (raw)
In-Reply-To: <f9bb13a7-60ba-37f1-9e22-3237e35cf4e5@roeck-us.net>

On Sun, Jan 19, 2020 at 07:46:11AM -0800, Guenter Roeck wrote:
> On 1/19/20 2:18 AM, Jonathan McDowell wrote:
> > 
> > In article <20200118172615.26329-1-linux@roeck-us.net> (earth.lists.linux-kernel) you wrote:
> > > This patch series implements various improvements for the k10temp driver.
> > ...
> > > The voltage and current information is limited to Ryzen CPUs. Voltage
> > > and current reporting on Threadripper and EPYC CPUs is different, and the
> > > reported information is either incomplete or wrong. Exclude it for the time
> > > being; it can always be added if/when more information becomes available.
> > 
> > > Tested with the following Ryzen CPUs:
> > 
> > Tested-By: Jonathan McDowell <noodles@earth.li>
> > 
> Thanks!
> 
> > Tested on a Ryzen 7 2700 (patched on top of 5.4.13):
> > 
> > | k10temp-pci-00c3
> > | Adapter: PCI adapter
> > | Vcore:        +0.80 V
> > | Vsoc:         +0.81 V
> > | Tdie:         +37.0°C
> > | Tctl:         +37.0°C
> > | Icore:        +8.31 A
> > | Isoc:         +6.86 A
> > 
> > Like the 1300X case I see a discrepancy compared to what the nct6779
> > driver says Vcore is:
> > 
> > | nct6779-isa-0290
> > | Adapter: ISA adapter
> > | Vcore:                  +0.33 V  (min =  +0.00 V, max =  +1.74 V)
> 
> I see that on all of my boards as well (3900X, different boards and board vendors),
> with temperatures reported by the Super-IO chip sometimes as low as 0.18V (!).
> Yet, there is a clear correlation of that voltage with CPU load.
> I suspect the measurement by the Super-IO chip is a different voltage.
> 
> I don't think there is anything we can do about that without access to more
> information.
...
> The problem with Ken's board is that idle current and voltage are very high.
> The idle voltage claims to be higher than the voltage under load, which
> doesn't really make sense. This is only reflected in the voltage and current
> reported by the CPU, but not by the voltage reported by the Super-IO chip.

I see clear correlation between load/Vcore/Icore/Tdie from your patched
k10temp driver which leads me to believe these numbers are valid for the
2700. Vsoc is fairly consistent and Isoc doesn't vary much either
(6.3-8.1A range over the past 8 hours).

J.

-- 
... "f u cn rd ths, u cn gt a gd jb n cmptr prgrmmng." -- Simon Cozens,
    ox.os.linux

  reply index

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-18 17:26 Guenter Roeck
2020-01-18 17:26 ` [PATCH v2 1/5] hwmon: (k10temp) Use bitops Guenter Roeck
2020-01-18 17:26 ` [PATCH v2 2/5] hmon: (k10temp) Convert to use devm_hwmon_device_register_with_info Guenter Roeck
2020-01-18 17:26 ` [PATCH v2 3/5] hwmon: (k10temp) Report temperatures per CPU die Guenter Roeck
2020-01-18 17:26 ` [PATCH v2 4/5] hwmon: (k10temp) Show core and SoC current and voltages on Ryzen CPUs Guenter Roeck
2020-01-18 17:26 ` [PATCH v2 5/5] hwmon: (k10temp) Don't show temperature limits on Ryzen (Zen) CPUs Guenter Roeck
2020-01-19  0:33 ` [PATCH v2 0/5] hwmon: k10temp driver improvements Ken Moffat
2020-01-19  0:48   ` Guenter Roeck
2020-01-19  1:08     ` Ken Moffat
2020-01-19  3:13     ` Brad Campbell
2020-01-19 10:18 ` Jonathan McDowell
2020-01-19 15:46   ` Guenter Roeck
2020-01-19 19:38     ` Jonathan McDowell [this message]
2020-01-19 13:38 ` Holger Kiehl
2020-01-19 15:49   ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200119193817.GM15976@earth.li \
    --to=noodles@earth.li \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=zarniwhoop73@googlemail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Hwmon Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-hwmon/0 linux-hwmon/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-hwmon linux-hwmon/ https://lore.kernel.org/linux-hwmon \
		linux-hwmon@vger.kernel.org
	public-inbox-index linux-hwmon

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-hwmon


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git