[RFC][PATCH 2/2] net: phy: tja11xx: Add BroadRReach Master/Slave support into TJA11xx PHY driver

[RFC][PATCH 2/2] net: phy: tja11xx: Add BroadRReach Master/Slave support into TJA11xx PHY driver

[Marek Vasut]

Add PHY tunable callbacks to allow configuring BroadRReach
Master/Slave mode.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: linux-hwmon@vger.kernel.org
---
 drivers/net/phy/nxp-tja11xx.c | 58 +++++++++++++++++++++++++++++++++++
 1 file changed, 58 insertions(+)

diff --git a/drivers/net/phy/nxp-tja11xx.c b/drivers/net/phy/nxp-tja11xx.c
index f1aeef449c33..78f6594a6acc 100644
--- a/drivers/net/phy/nxp-tja11xx.c
+++ b/drivers/net/phy/nxp-tja11xx.c
@@ -26,6 +26,7 @@
 #define MII_ECTRL_WAKE_REQUEST		BIT(0)
 
 #define MII_CFG1			18
+#define MII_CFG1_MASTER_SLAVE		BIT(15)
 #define MII_CFG1_AUTO_OP		BIT(14)
 #define MII_CFG1_SLEEP_CONFIRM		BIT(6)
 #define MII_CFG1_LED_MODE_MASK		GENMASK(5, 4)
@@ -115,6 +116,11 @@ static int tja11xx_enable_link_control(struct phy_device *phydev)
 	return phy_set_bits(phydev, MII_ECTRL, MII_ECTRL_LINK_CONTROL);
 }
 
+static int tja11xx_disable_link_control(struct phy_device *phydev)
+{
+	return phy_clear_bits(phydev, MII_ECTRL, MII_ECTRL_LINK_CONTROL);
+}
+
 static int tja11xx_wakeup(struct phy_device *phydev)
 {
 	int ret;
@@ -299,6 +305,52 @@ static void tja11xx_get_stats(struct phy_device *phydev,
 	}
 }
 
+static int tja11xx_get_tunable(struct phy_device *phydev,
+			       struct ethtool_tunable *tuna, void *data)
+{
+	u8 *mode = (u8 *)data;
+	int ret;
+
+	switch (tuna->id) {
+	case ETHTOOL_PHY_BRR_MODE:
+		ret = phy_read(phydev, MII_CFG1);
+		if (ret < 0)
+			return ret;
+		*mode = !!(ret & MII_CFG1_MASTER_SLAVE);
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int tja11xx_set_tunable(struct phy_device *phydev,
+			       struct ethtool_tunable *tuna, const void *data)
+{
+	u8 mode = *(u8 *)data;
+	int ret;
+
+	switch (tuna->id) {
+	case ETHTOOL_PHY_BRR_MODE:
+		ret = tja11xx_disable_link_control(phydev);
+		if (ret)
+			return ret;
+
+		ret = phy_modify(phydev, MII_CFG1, MII_CFG1_MASTER_SLAVE,
+				 mode ? MII_CFG1_MASTER_SLAVE : 0);
+		if (ret)
+			return ret;
+
+		ret = tja11xx_enable_link_control(phydev);
+		if (ret)
+			return ret;
+
+		/* TJA1100 needs this to bring the link back up. */
+		return genphy_soft_reset(phydev);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
 static int tja11xx_hwmon_read(struct device *dev,
 			      enum hwmon_sensor_types type,
 			      u32 attr, int channel, long *value)
@@ -425,6 +477,9 @@ static struct phy_driver tja11xx_driver[] = {
 		.get_sset_count = tja11xx_get_sset_count,
 		.get_strings	= tja11xx_get_strings,
 		.get_stats	= tja11xx_get_stats,
+		/* Tunables */
+		.get_tunable	= tja11xx_get_tunable,
+		.set_tunable	= tja11xx_set_tunable,
 	}, {
 		PHY_ID_MATCH_MODEL(PHY_ID_TJA1101),
 		.name		= "NXP TJA1101",
@@ -444,6 +499,9 @@ static struct phy_driver tja11xx_driver[] = {
 		.get_sset_count = tja11xx_get_sset_count,
 		.get_strings	= tja11xx_get_strings,
 		.get_stats	= tja11xx_get_stats,
+		/* Tunables */
+		.get_tunable	= tja11xx_get_tunable,
+		.set_tunable	= tja11xx_set_tunable,
 	}
 };
 
-- 
2.25.1

Re: [RFC][PATCH 2/2] net: phy: tja11xx: Add BroadRReach Master/Slave support into TJA11xx PHY driver

[Andrew Lunn]

> +static int tja11xx_get_tunable(struct phy_device *phydev,
> +			       struct ethtool_tunable *tuna, void *data)
> +{
> +	u8 *mode = (u8 *)data;
> +	int ret;
> +
> +	switch (tuna->id) {
> +	case ETHTOOL_PHY_BRR_MODE:
> +		ret = phy_read(phydev, MII_CFG1);
> +		if (ret < 0)
> +			return ret;
> +		*mode = !!(ret & MII_CFG1_MASTER_SLAVE);

It is not so easy to see if master is 1 or 0?


> +		return 0;
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
> +static int tja11xx_set_tunable(struct phy_device *phydev,
> +			       struct ethtool_tunable *tuna, const void *data)
> +{
> +	u8 mode = *(u8 *)data;
> +	int ret;
> +
> +	switch (tuna->id) {
> +	case ETHTOOL_PHY_BRR_MODE:
> +		ret = tja11xx_disable_link_control(phydev);
> +		if (ret)
> +			return ret;
> +
> +		ret = phy_modify(phydev, MII_CFG1, MII_CFG1_MASTER_SLAVE,
> +				 mode ? MII_CFG1_MASTER_SLAVE : 0);

And if the user passes 42?

    Andrew