Linux-Hwmon Archive on lore.kernel.org
 help / color / Atom feed
From: Rob Herring <robh@kernel.org>
To: Tim Harvey <tharvey@gateworks.com>
Cc: Lee Jones <lee.jones@linaro.org>,
	Jean Delvare <jdelvare@suse.com>,
	Guenter Roeck <linux@roeck-us.net>,
	linux-hwmon@vger.kernel.org,
	Frank Rowand <frowand.list@gmail.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Robert Jones <rjones@gateworks.com>
Subject: Re: [PATCH v7 1/3] dt-bindings: mfd: Add Gateworks System Controller bindings
Date: Thu, 26 Mar 2020 13:13:27 -0600
Message-ID: <20200326191327.GA27256@bogus> (raw)
In-Reply-To: <1584736550-7520-2-git-send-email-tharvey@gateworks.com>

On Fri, Mar 20, 2020 at 01:35:48PM -0700, Tim Harvey wrote:
> This patch adds documentation of device-tree bindings for the
> Gateworks System Controller (GSC).
> 
> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
> ---
> v7:
>  - change divider from mili-ohms to ohms
>  - add constraints for voltage divider and offset
>  - remove unnecessary ref for offset
>  - renamed fan to fan-controller and changed base prop to reg
> 
> v6:
>  - fix typo
>  - drop invalid description from #interrupt-cells property
>  - fix adc pattern property
>  - add unit suffix
>  - replace hwmon/adc with adc/channel
>  - changed adc type to mode and enum int
>  - add unit suffix and drop ref for voltage-divider
>  - moved fan to its own subnode with base register
> 
> v5:
>  - resolve dt_binding_check issues
> 
> v4:
>  - move to using pwm<n>_auto_point<m>_{pwm,temp} for FAN PWM
>  - remove unncessary resolution/scaling properties for ADCs
>  - update to yaml
>  - remove watchdog
> 
> v3:
>  - replaced _ with -
>  - remove input bindings
>  - added full description of hwmon
>  - fix unit address of hwmon child nodes
> ---
>  .../devicetree/bindings/mfd/gateworks-gsc.yaml     | 173 +++++++++++++++++++++
>  1 file changed, 173 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
> new file mode 100644
> index 00000000..0457137
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
> @@ -0,0 +1,173 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/gateworks-gsc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Gateworks System Controller multi-function device
> +
> +description: |
> +  The GSC is a Multifunction I2C slave device with the following submodules:
> +   - Watchdog Timer
> +   - GPIO
> +   - Pushbutton controller
> +   - Hardware Monitor with ADC's for temperature and voltage rails and
> +     fan controller
> +
> +maintainers:
> +  - Tim Harvey <tharvey@gateworks.com>
> +  - Robert Jones <rjones@gateworks.com>
> +
> +properties:
> +  $nodename:
> +    pattern: "gsc@[0-9a-f]{1,2}"
> +  compatible:
> +    const: gw,gsc
> +
> +  reg:
> +    description: I2C device address
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  interrupt-controller: true
> +
> +  "#interrupt-cells":
> +    const: 1
> +
> +  adc:
> +    type: object
> +    description: Optional Hardware Monitoring module
> +
> +    properties:
> +      compatible:
> +        const: gw,gsc-adc
> +
> +      "#address-cells":
> +        const: 1
> +
> +      "#size-cells":
> +        const: 0
> +
> +    patternProperties:
> +      "^channel@[0-9]+$":
> +        type: object
> +        description: |
> +          Properties for a single ADC which can report cooked values
> +          (ie temperature sensor based on thermister), raw values
> +          (ie voltage rail with a pre-scaling resistor divider).
> +
> +        properties:
> +          reg:
> +            description: Register of the ADC
> +            maxItems: 1
> +
> +          label:
> +            description: Name of the ADC input
> +
> +          gw,mode:
> +            description: |
> +              conversion mode:
> +                0 - temperature, in C*10
> +                1 - pre-scaled voltage value
> +                2 - scaled voltage based on an optional resistor divider
> +                    and optional offset
> +            allOf:
> +              - $ref: /schemas/types.yaml#/definitions/uint32
> +            enum: [0, 1, 2]
> +
> +          gw,voltage-divider-ohms:
> +            description: values of resistors for divider on raw ADC input
> +            maxItems: 2
> +            items:
> +             minimum: 1000
> +             maximum: 1000000
> +
> +          gw,voltage-offset-microvolt:
> +            description: |
> +              A positive voltage offset to apply to a raw ADC
> +              (ie to compensate for a diode drop).
> +            minimum: 0
> +            maximum: 1000000
> +
> +        required:
> +          - gw,mode
> +          - reg
> +          - label
> +
> +    required:
> +      - compatible
> +      - "#address-cells"
> +      - "#size-cells"
> +
> +  fan-controller:
> +    type: object
> +    description: Optional FAN controller
> +
> +    properties:
> +      compatible:
> +        const: gw,gsc-fan
> +
> +      reg:
> +        description: The fan controller base address
> +        maxItems: 1
> +
> +    required:
> +      - compatible
> +      - reg
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - interrupt-controller
> +  - "#interrupt-cells"
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        gsc@20 {
> +            compatible = "gw,gsc";
> +            reg = <0x20>;
> +            interrupt-parent = <&gpio1>;
> +            interrupts = <4 GPIO_ACTIVE_LOW>;
> +            interrupt-controller;
> +            #interrupt-cells = <1>;
> +
> +            adc {
> +                compatible = "gw,gsc-adc";
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +
> +                channel@0 { /* A0: Board Temperature */
> +                    reg = <0x00>;
> +                    label = "temp";
> +                    gw,mode = <0>;
> +                };
> +
> +                channel@2 { /* A1: Input Voltage (raw ADC) */
> +                    reg = <0x02>;
> +                    label = "vdd_vin";
> +                    gw,mode = <1>;
> +                    gw,voltage-divider-ohms = <22100 1000>;
> +                    gw,voltage-offset-microvolt = <800000>;
> +                };
> +
> +                channel@b { /* A2: Battery voltage */
> +                    reg = <0x0b>;
> +                    label = "vdd_bat";
> +                    gw,mode = <1>;
> +                };
> +            };
> +
> +            fan-controller {

fan-controller@2c

(and the schema will need to be changed either to the above or a 
pattern)

With that,

Reviewed-by: Rob Herring <robh@kernel.org>

> +                compatible = "gw,gsc-fan";
> +                reg = <0x2c>;
> +            };
> +        };
> +    };
> -- 
> 2.7.4
> 

  reply index

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-20 20:35 [PATCH v7 0/3] Add support for the Gateworks System Controller Tim Harvey
2020-03-20 20:35 ` [PATCH v7 1/3] dt-bindings: mfd: Add Gateworks System Controller bindings Tim Harvey
2020-03-26 19:13   ` Rob Herring [this message]
2020-03-20 20:35 ` [PATCH v7 2/3] mfd: add Gateworks System Controller core driver Tim Harvey
2020-03-26 10:17   ` Lee Jones
2020-03-26 21:55     ` Tim Harvey
2020-03-20 20:35 ` [PATCH v7 3/3] hwmon: add Gateworks System Controller support Tim Harvey
2020-03-22 21:03   ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200326191327.GA27256@bogus \
    --to=robh@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=frowand.list@gmail.com \
    --cc=jdelvare@suse.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=rjones@gateworks.com \
    --cc=tharvey@gateworks.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Hwmon Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-hwmon/0 linux-hwmon/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-hwmon linux-hwmon/ https://lore.kernel.org/linux-hwmon \
		linux-hwmon@vger.kernel.org
	public-inbox-index linux-hwmon

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-hwmon


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git