linux-hwmon.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [RFC 0/8] mfd: Add support for Khadas Microcontroller
@ 2020-04-21  8:00 Neil Armstrong
  2020-04-21  8:00 ` [RFC 1/8] dt-bindings: mfd: add Khadas Microcontroller bindings Neil Armstrong
                   ` (8 more replies)
  0 siblings, 9 replies; 14+ messages in thread
From: Neil Armstrong @ 2020-04-21  8:00 UTC (permalink / raw)
  To: lee.jones, jdelvare, linux, srinivas.kandagatla
  Cc: nick, art, Neil Armstrong, linux-amlogic, linux-hwmon,
	linux-arm-kernel, linux-kernel

The new Khadas VIM2, VIM3 and Edge boards embeds an on-board microcontroller
connected via I2C.

This Microcontroller is present on the Khadas VIM1, VIM2, VIM3 and Edge
boards.

It has multiple boot control features like password check, power-on
options, power-off control and system FAN control on recent boards.

Thie serie adds :
- the bindings
- the MFD driver
- the HWMON cell driver
- the NVMEM cell driver
- updates MAINTAINERS
- add support into the Khadas VIM3/VIM3L DT

Neil Armstrong (8):
  dt-bindings: mfd: add Khadas Microcontroller bindings
  mfd: add support for the Khadas System control Microcontroller
  hwmon: add support for the MCU controlled FAN on Khadas boards
  nvmem: add support for the Khadas MCU Programmable User Memory
  MAINTAINERS: add myself as maintainer for Khadas MCU drivers
  arm64: dts: meson-g12b: move G12B thermal nodes to meson-g12b.dtsi
  arm64: dts: meson-sm1: add cpu thermal nodes
  arm64: dts: meson-khadas-vim3: add Khadas MCU nodes

 .../devicetree/bindings/mfd/khadas,mcu.yaml   |  44 ++++
 MAINTAINERS                                   |  11 +
 arch/arm64/boot/dts/amlogic/meson-g12.dtsi    |  23 --
 arch/arm64/boot/dts/amlogic/meson-g12b.dtsi   |  22 ++
 .../boot/dts/amlogic/meson-khadas-vim3.dtsi   |  23 ++
 arch/arm64/boot/dts/amlogic/meson-sm1.dtsi    |  24 ++
 drivers/hwmon/Kconfig                         |   9 +
 drivers/hwmon/Makefile                        |   1 +
 drivers/hwmon/khadas-mcu-fan.c                | 230 ++++++++++++++++++
 drivers/mfd/Kconfig                           |  14 ++
 drivers/mfd/Makefile                          |   1 +
 drivers/mfd/khadas-mcu.c                      | 143 +++++++++++
 drivers/nvmem/Kconfig                         |   8 +
 drivers/nvmem/Makefile                        |   2 +
 drivers/nvmem/khadas-mcu-user-mem.c           | 128 ++++++++++
 include/linux/mfd/khadas-mcu.h                |  91 +++++++
 16 files changed, 751 insertions(+), 23 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/khadas,mcu.yaml
 create mode 100644 drivers/hwmon/khadas-mcu-fan.c
 create mode 100644 drivers/mfd/khadas-mcu.c
 create mode 100644 drivers/nvmem/khadas-mcu-user-mem.c
 create mode 100644 include/linux/mfd/khadas-mcu.h

-- 
2.22.0


^ permalink raw reply	[flat|nested] 14+ messages in thread

* [RFC 1/8] dt-bindings: mfd: add Khadas Microcontroller bindings
  2020-04-21  8:00 [RFC 0/8] mfd: Add support for Khadas Microcontroller Neil Armstrong
@ 2020-04-21  8:00 ` Neil Armstrong
  2020-05-06 20:12   ` Rob Herring
  2020-04-21  8:00 ` [RFC 2/8] mfd: add support for the Khadas System control Microcontroller Neil Armstrong
                   ` (7 subsequent siblings)
  8 siblings, 1 reply; 14+ messages in thread
From: Neil Armstrong @ 2020-04-21  8:00 UTC (permalink / raw)
  To: lee.jones, jdelvare, linux, srinivas.kandagatla, devicetree
  Cc: nick, art, Neil Armstrong, linux-amlogic, linux-hwmon,
	linux-arm-kernel, linux-kernel

This Microcontroller is present on the Khadas VIM1, VIM2, VIM3 and Edge
boards.

It has multiple boot control features like password check, power-on
options, power-off control and system FAN control on recent boards.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../devicetree/bindings/mfd/khadas,mcu.yaml   | 44 +++++++++++++++++++
 1 file changed, 44 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/khadas,mcu.yaml

diff --git a/Documentation/devicetree/bindings/mfd/khadas,mcu.yaml b/Documentation/devicetree/bindings/mfd/khadas,mcu.yaml
new file mode 100644
index 000000000000..a3b976f101e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/khadas,mcu.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/khadas,mcu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Khadas on-board Microcontroller Device Tree Bindings
+
+maintainers:
+  - Neil Armstrong <narmstrong@baylibre.com>
+
+description: |
+  Khadas embeds a microcontroller on their VIM and Edge boards adding some
+  system feature as PWM Fan control (for VIM2 rev14 or VIM3), User memory
+  storage, IR/Key resume control, system power LED control and more.
+
+properties:
+  compatible:
+    enum:
+      - khadas,mcu # MCU revision is discoverable
+
+  "#cooling-cells": # Only needed for boards having FAN control feature
+    const: 2
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      khadas_mcu: system-controller@18 {
+        compatible = "khadas,mcu";
+        reg = <0x18>;
+        #cooling-cells = <2>;
+      };
+    };
-- 
2.22.0


^ permalink raw reply related	[flat|nested] 14+ messages in thread

* [RFC 2/8] mfd: add support for the Khadas System control Microcontroller
  2020-04-21  8:00 [RFC 0/8] mfd: Add support for Khadas Microcontroller Neil Armstrong
  2020-04-21  8:00 ` [RFC 1/8] dt-bindings: mfd: add Khadas Microcontroller bindings Neil Armstrong
@ 2020-04-21  8:00 ` Neil Armstrong
  2020-04-21  8:00 ` [RFC 3/8] hwmon: add support for the MCU controlled FAN on Khadas boards Neil Armstrong
                   ` (6 subsequent siblings)
  8 siblings, 0 replies; 14+ messages in thread
From: Neil Armstrong @ 2020-04-21  8:00 UTC (permalink / raw)
  To: lee.jones, jdelvare, linux, srinivas.kandagatla
  Cc: nick, art, Neil Armstrong, linux-amlogic, linux-hwmon,
	linux-arm-kernel, linux-kernel

This Microcontroller is present on the Khadas VIM1, VIM2, VIM3 and Edge
boards.

It has multiple boot control features like password check, power-on
options, power-off control and system FAN control on recent boards.

This implements a very basic MFD driver with the fan control and User
NVMEM cells.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/mfd/Kconfig            |  14 ++++
 drivers/mfd/Makefile           |   1 +
 drivers/mfd/khadas-mcu.c       | 143 +++++++++++++++++++++++++++++++++
 include/linux/mfd/khadas-mcu.h |  91 +++++++++++++++++++++
 4 files changed, 249 insertions(+)
 create mode 100644 drivers/mfd/khadas-mcu.c
 create mode 100644 include/linux/mfd/khadas-mcu.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 0a59249198d3..b95091397052 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -2003,6 +2003,20 @@ config MFD_WCD934X
 	  This driver provides common support WCD934x audio codec and its
 	  associated Pin Controller, Soundwire Controller and Audio codec.
 
+config MFD_KHADAS_MCU
+	tristate "Support for Khadas System control Microcontroller"
+	depends on I2C
+	depends on OF || COMPILE_TEST
+	select MFD_CORE
+	select REGMAP_I2C
+	help
+	  Support for the Khadas System control Microcontroller interface present
+	  on their VIM and Edge boards.
+
+	  This driver provides common support for accessing the device,
+	  additional drivers must be enabled in order to use the functionality
+	  of the device.
+
 menu "Multimedia Capabilities Port drivers"
 	depends on ARCH_SA1100
 
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index f935d10cbf0f..0f1633b096bb 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -257,5 +257,6 @@ obj-$(CONFIG_MFD_ROHM_BD70528)	+= rohm-bd70528.o
 obj-$(CONFIG_MFD_ROHM_BD71828)	+= rohm-bd71828.o
 obj-$(CONFIG_MFD_ROHM_BD718XX)	+= rohm-bd718x7.o
 obj-$(CONFIG_MFD_STMFX) 	+= stmfx.o
+obj-$(CONFIG_MFD_KHADAS_MCU) 	+= khadas-mcu.o
 
 obj-$(CONFIG_SGI_MFD_IOC3)	+= ioc3.o
diff --git a/drivers/mfd/khadas-mcu.c b/drivers/mfd/khadas-mcu.c
new file mode 100644
index 000000000000..6d08fa2e373a
--- /dev/null
+++ b/drivers/mfd/khadas-mcu.c
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for Khadas System control Microcontroller
+ *
+ * Copyright (C) 2020 BayLibre SAS
+ * Author(s): Neil Armstrong <narmstrong@baylibre.com>
+ */
+#include <linux/bitfield.h>
+#include <linux/i2c.h>
+#include <linux/mfd/khadas-mcu.h>
+#include <linux/regmap.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+
+static bool khadas_mcu_reg_volatile(struct device *dev, unsigned int reg)
+{
+	if (reg >= KHADAS_MCU_USER_DATA_0_REG &&
+	    reg < KHADAS_MCU_PWR_OFF_CMD_REG)
+		return true;
+
+	switch (reg) {
+	case KHADAS_MCU_PWR_OFF_CMD_REG:
+	case KHADAS_MCU_PASSWD_START_REG:
+	case KHADAS_MCU_CHECK_VEN_PASSWD_REG:
+	case KHADAS_MCU_CHECK_USER_PASSWD_REG:
+	case KHADAS_MCU_WOL_INIT_START_REG:
+	case KHADAS_MCU_CMD_FAN_STATUS_CTRL_REG:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool khadas_mcu_reg_writeable(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case KHADAS_MCU_PASSWD_VEN_0_REG:
+	case KHADAS_MCU_PASSWD_VEN_1_REG:
+	case KHADAS_MCU_PASSWD_VEN_2_REG:
+	case KHADAS_MCU_PASSWD_VEN_3_REG:
+	case KHADAS_MCU_PASSWD_VEN_4_REG:
+	case KHADAS_MCU_PASSWD_VEN_5_REG:
+	case KHADAS_MCU_MAC_0_REG:
+	case KHADAS_MCU_MAC_1_REG:
+	case KHADAS_MCU_MAC_2_REG:
+	case KHADAS_MCU_MAC_3_REG:
+	case KHADAS_MCU_MAC_4_REG:
+	case KHADAS_MCU_MAC_5_REG:
+	case KHADAS_MCU_USID_0_REG:
+	case KHADAS_MCU_USID_1_REG:
+	case KHADAS_MCU_USID_2_REG:
+	case KHADAS_MCU_USID_3_REG:
+	case KHADAS_MCU_USID_4_REG:
+	case KHADAS_MCU_USID_5_REG:
+	case KHADAS_MCU_VERSION_0_REG:
+	case KHADAS_MCU_VERSION_1_REG:
+	case KHADAS_MCU_DEVICE_NO_0_REG:
+	case KHADAS_MCU_DEVICE_NO_1_REG:
+	case KHADAS_MCU_FACTORY_TEST_REG:
+	case KHADAS_MCU_SHUTDOWN_NORMAL_STATUS_REG:
+		return false;
+	default:
+		return true;
+	}
+}
+
+static const struct regmap_config khadas_mcu_regmap_config = {
+	.reg_bits	= 8,
+	.reg_stride	= 1,
+	.val_bits	= 8,
+	.max_register	= KHADAS_MCU_CMD_FAN_STATUS_CTRL_REG,
+	.volatile_reg	= khadas_mcu_reg_volatile,
+	.writeable_reg	= khadas_mcu_reg_writeable,
+	.cache_type	= REGCACHE_RBTREE,
+};
+
+static struct mfd_cell khadas_mcu_fan_cells[] = {
+	/* Feature supported only on VIM1/2 Rev13+ and VIM3 */
+	{ .name = "khadas-mcu-fan-ctrl", },
+};
+
+static struct mfd_cell khadas_mcu_cells[] = {
+	/* Features supported on all board revisions */
+	{ .name = "khadas-mcu-user-mem", },
+};
+
+static int khadas_mcu_probe(struct i2c_client *client,
+		       const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct khadas_mcu *khadas_mcu;
+	int ret;
+
+	khadas_mcu = devm_kzalloc(dev, sizeof(*khadas_mcu), GFP_KERNEL);
+	if (!khadas_mcu)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, khadas_mcu);
+
+	khadas_mcu->dev = dev;
+
+	khadas_mcu->map = devm_regmap_init_i2c(client,
+					       &khadas_mcu_regmap_config);
+	if (IS_ERR(khadas_mcu->map)) {
+		ret = PTR_ERR(khadas_mcu->map);
+		dev_err(dev, "Failed to allocate register map: %d\n", ret);
+		return ret;
+	}
+
+	ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
+				   khadas_mcu_cells,
+				   ARRAY_SIZE(khadas_mcu_cells),
+				   NULL, 0, NULL);
+	if (ret)
+		return ret;
+
+	if (of_find_property(dev->of_node, "#cooling-cells", NULL))
+		return devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
+					    khadas_mcu_fan_cells,
+					    ARRAY_SIZE(khadas_mcu_fan_cells),
+					    NULL, 0, NULL);
+
+	return 0;
+}
+
+static const struct of_device_id khadas_mcu_of_match[] = {
+	{ .compatible = "khadas,mcu", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, khadas_mcu_of_match);
+
+static struct i2c_driver khadas_mcu_driver = {
+	.driver = {
+		.name = "khadas-mcu-core",
+		.of_match_table = of_match_ptr(khadas_mcu_of_match),
+	},
+	.probe = khadas_mcu_probe,
+};
+module_i2c_driver(khadas_mcu_driver);
+
+MODULE_DESCRIPTION("Khadas MCU core driver");
+MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/khadas-mcu.h b/include/linux/mfd/khadas-mcu.h
new file mode 100644
index 000000000000..2e68af21735c
--- /dev/null
+++ b/include/linux/mfd/khadas-mcu.h
@@ -0,0 +1,91 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Khadas System control Microcontroller Register map
+ *
+ * Copyright (C) 2020 BayLibre SAS
+ * Author(s): Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#ifndef MFD_KHADAS_MCU_H
+#define MFD_KHADAS_MCU_H
+
+#define KHADAS_MCU_PASSWD_VEN_0_REG		0x0 /* RO */
+#define KHADAS_MCU_PASSWD_VEN_1_REG		0x1 /* RO */
+#define KHADAS_MCU_PASSWD_VEN_2_REG		0x2 /* RO */
+#define KHADAS_MCU_PASSWD_VEN_3_REG		0x3 /* RO */
+#define KHADAS_MCU_PASSWD_VEN_4_REG		0x4 /* RO */
+#define KHADAS_MCU_PASSWD_VEN_5_REG		0x5 /* RO */
+#define KHADAS_MCU_MAC_0_REG			0x6 /* RO */
+#define KHADAS_MCU_MAC_1_REG			0x7 /* RO */
+#define KHADAS_MCU_MAC_2_REG			0x8 /* RO */
+#define KHADAS_MCU_MAC_3_REG			0x9 /* RO */
+#define KHADAS_MCU_MAC_4_REG			0xa /* RO */
+#define KHADAS_MCU_MAC_5_REG			0xb /* RO */
+#define KHADAS_MCU_USID_0_REG			0xc /* RO */
+#define KHADAS_MCU_USID_1_REG			0xd /* RO */
+#define KHADAS_MCU_USID_2_REG			0xe /* RO */
+#define KHADAS_MCU_USID_3_REG			0xf /* RO */
+#define KHADAS_MCU_USID_4_REG			0x10 /* RO */
+#define KHADAS_MCU_USID_5_REG			0x11 /* RO */
+#define KHADAS_MCU_VERSION_0_REG		0x12 /* RO */
+#define KHADAS_MCU_VERSION_1_REG		0x13 /* RO */
+#define KHADAS_MCU_DEVICE_NO_0_REG		0x14 /* RO */
+#define KHADAS_MCU_DEVICE_NO_1_REG		0x15 /* RO */
+#define KHADAS_MCU_FACTORY_TEST_REG		0x16 /* R */
+#define KHADAS_MCU_BOOT_MODE_REG		0x20 /* RW */
+#define KHADAS_MCU_BOOT_EN_WOL_REG		0x21 /* RW */
+#define KHADAS_MCU_BOOT_EN_RTC_REG		0x22 /* RW */
+#define KHADAS_MCU_BOOT_EN_EXP_REG		0x23 /* RW */
+#define KHADAS_MCU_BOOT_EN_IR_REG		0x24 /* RW */
+#define KHADAS_MCU_BOOT_EN_DCIN_REG		0x25 /* RW */
+#define KHADAS_MCU_BOOT_EN_KEY_REG		0x26 /* RW */
+#define KHADAS_MCU_KEY_MODE_REG			0x27 /* RW */
+#define KHADAS_MCU_LED_MODE_ON_REG		0x28 /* RW */
+#define KHADAS_MCU_LED_MODE_OFF_REG		0x29 /* RW */
+#define KHADAS_MCU_SHUTDOWN_NORMAL_REG		0x2c /* RW */
+#define KHADAS_MCU_MAC_SWITCH_REG		0x2d /* RW */
+#define KHADAS_MCU_MCU_SLEEP_MODE_REG		0x2e /* RW */
+#define KHADAS_MCU_IR_CODE1_0_REG		0x2f /* RW */
+#define KHADAS_MCU_IR_CODE1_1_REG		0x30 /* RW */
+#define KHADAS_MCU_IR_CODE1_2_REG		0x31 /* RW */
+#define KHADAS_MCU_IR_CODE1_3_REG		0x32 /* RW */
+#define KHADAS_MCU_USB_PCIE_SWITCH_REG		0x33 /* RW */
+#define KHADAS_MCU_IR_CODE2_0_REG		0x34 /* RW */
+#define KHADAS_MCU_IR_CODE2_1_REG		0x35 /* RW */
+#define KHADAS_MCU_IR_CODE2_2_REG		0x36 /* RW */
+#define KHADAS_MCU_IR_CODE2_3_REG		0x37 /* RW */
+#define KHADAS_MCU_PASSWD_USER_0_REG		0x40 /* RW */
+#define KHADAS_MCU_PASSWD_USER_1_REG		0x41 /* RW */
+#define KHADAS_MCU_PASSWD_USER_2_REG		0x42 /* RW */
+#define KHADAS_MCU_PASSWD_USER_3_REG		0x43 /* RW */
+#define KHADAS_MCU_PASSWD_USER_4_REG		0x44 /* RW */
+#define KHADAS_MCU_PASSWD_USER_5_REG		0x45 /* RW */
+#define KHADAS_MCU_USER_DATA_0_REG		0x46 /* RW 56 bytes */
+#define KHADAS_MCU_PWR_OFF_CMD_REG		0x80 /* WO */
+#define KHADAS_MCU_PASSWD_START_REG		0x81 /* WO */
+#define KHADAS_MCU_CHECK_VEN_PASSWD_REG		0x82 /* WO */
+#define KHADAS_MCU_CHECK_USER_PASSWD_REG	0x83 /* WO */
+#define KHADAS_MCU_SHUTDOWN_NORMAL_STATUS_REG	0x86 /* RO */
+#define KHADAS_MCU_WOL_INIT_START_REG		0x87 /* WO */
+#define KHADAS_MCU_CMD_FAN_STATUS_CTRL_REG	0x88 /* WO */
+
+/* Boards */
+enum {
+	KHADAS_BOARD_VIM1 = 0x1,
+	KHADAS_BOARD_VIM2,
+	KHADAS_BOARD_VIM3,
+	KHADAS_BOARD_EDGE = 0x11,
+	KHADAS_BOARD_EDGE_V,
+};
+
+/**
+ * struct khadas_mcu_data - Khadas MCU MFD structure
+ * @device:		device reference used for logs
+ * @map:		register map
+ */
+struct khadas_mcu {
+	struct device *dev;
+	struct regmap *map;
+};
+
+#endif /* MFD_KHADAS_MCU_H */
-- 
2.22.0


^ permalink raw reply related	[flat|nested] 14+ messages in thread

* [RFC 3/8] hwmon: add support for the MCU controlled FAN on Khadas boards
  2020-04-21  8:00 [RFC 0/8] mfd: Add support for Khadas Microcontroller Neil Armstrong
  2020-04-21  8:00 ` [RFC 1/8] dt-bindings: mfd: add Khadas Microcontroller bindings Neil Armstrong
  2020-04-21  8:00 ` [RFC 2/8] mfd: add support for the Khadas System control Microcontroller Neil Armstrong
@ 2020-04-21  8:00 ` Neil Armstrong
  2020-04-21  9:24   ` Guenter Roeck
  2020-04-21  8:00 ` [RFC 4/8] nvmem: add support for the Khadas MCU Programmable User Memory Neil Armstrong
                   ` (5 subsequent siblings)
  8 siblings, 1 reply; 14+ messages in thread
From: Neil Armstrong @ 2020-04-21  8:00 UTC (permalink / raw)
  To: lee.jones, jdelvare, linux, srinivas.kandagatla
  Cc: nick, art, Neil Armstrong, linux-amlogic, linux-hwmon,
	linux-arm-kernel, linux-kernel

The new Khadas VIM2 and VIM3 boards controls the cooling fan via the
on-board microcontroller.

This implements the FAN control as HWMON devices as cell of the Khadas
MCU MFD driver.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/hwmon/Kconfig          |   9 ++
 drivers/hwmon/Makefile         |   1 +
 drivers/hwmon/khadas-mcu-fan.c | 230 +++++++++++++++++++++++++++++++++
 3 files changed, 240 insertions(+)
 create mode 100644 drivers/hwmon/khadas-mcu-fan.c

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 4c62f900bf7e..7f63ff7bb732 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1997,6 +1997,15 @@ config SENSORS_XGENE
 	  If you say yes here you get support for the temperature
 	  and power sensors for APM X-Gene SoC.
 
+config SENSORS_KHADAS_MCU_FAN
+	tristate "Khadas MCU controller FAN driver"
+	depends on OF || COMPILE_TEST
+	select MFD_CORE
+	select REGMAP
+	help
+	  If you say yes here you get support for the FAN controlled
+	  by the Microcontroller found on the Khadas VIM boards.
+
 if ACPI
 
 comment "ACPI drivers"
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index b0b9c8e57176..20db40f6d57f 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -185,6 +185,7 @@ obj-$(CONFIG_SENSORS_W83L786NG)	+= w83l786ng.o
 obj-$(CONFIG_SENSORS_WM831X)	+= wm831x-hwmon.o
 obj-$(CONFIG_SENSORS_WM8350)	+= wm8350-hwmon.o
 obj-$(CONFIG_SENSORS_XGENE)	+= xgene-hwmon.o
+obj-$(CONFIG_SENSORS_KHADAS_MCU_FAN)	+= khadas-mcu-fan.o
 
 obj-$(CONFIG_SENSORS_OCC)	+= occ/
 obj-$(CONFIG_PMBUS)		+= pmbus/
diff --git a/drivers/hwmon/khadas-mcu-fan.c b/drivers/hwmon/khadas-mcu-fan.c
new file mode 100644
index 000000000000..dd92b2bcb7e3
--- /dev/null
+++ b/drivers/hwmon/khadas-mcu-fan.c
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Khadas MCU Controlled FAN driver
+ *
+ * Copyright (C) 2020 BayLibre SAS
+ * Author(s): Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/mfd/khadas-mcu.h>
+#include <linux/regmap.h>
+#include <linux/sysfs.h>
+#include <linux/thermal.h>
+
+#define MAX_LEVEL 3
+
+struct khadas_mcu_fan_ctx {
+	struct khadas_mcu *mcu;
+	unsigned int level;
+	struct thermal_cooling_device *cdev;
+};
+
+static int khadas_mcu_fan_set_level(struct khadas_mcu_fan_ctx *ctx,
+				    unsigned int level)
+{
+	int ret;
+
+	ret = regmap_write(ctx->mcu->map, KHADAS_MCU_CMD_FAN_STATUS_CTRL_REG,
+			   level);
+	if (ret)
+		return ret;
+
+	ctx->level = level;
+
+	return 0;
+}
+
+static ssize_t level_store(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	struct khadas_mcu_fan_ctx *ctx = dev_get_drvdata(dev);
+	unsigned long level;
+	int ret;
+
+	if (kstrtoul(buf, 10, &level) || level > MAX_LEVEL)
+		return -EINVAL;
+
+	ret = khadas_mcu_fan_set_level(ctx, level);
+	if (ret < 0)
+		return ret;
+
+	return count;
+}
+
+static ssize_t level_show(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct khadas_mcu_fan_ctx *ctx = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%u\n", ctx->level);
+}
+
+static SENSOR_DEVICE_ATTR_RW(level1, level, 0);
+
+static struct attribute *khadas_mcu_fan_attrs[] = {
+	&sensor_dev_attr_level1.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group khadas_mcu_fan_group = {
+	.attrs = khadas_mcu_fan_attrs,
+};
+
+static const struct attribute_group *khadas_mcu_fan_groups[] = {
+	&khadas_mcu_fan_group,
+	NULL,
+};
+
+/* thermal cooling device callbacks */
+static int khadas_mcu_fan_get_max_state(struct thermal_cooling_device *cdev,
+					unsigned long *state)
+{
+	struct khadas_mcu_fan_ctx *ctx = cdev->devdata;
+
+	if (!ctx)
+		return -EINVAL;
+
+	*state = MAX_LEVEL;
+
+	return 0;
+}
+
+static int khadas_mcu_fan_get_cur_state(struct thermal_cooling_device *cdev,
+					unsigned long *state)
+{
+	struct khadas_mcu_fan_ctx *ctx = cdev->devdata;
+
+	if (!ctx)
+		return -EINVAL;
+
+	*state = ctx->level;
+
+	return 0;
+}
+
+static int
+khadas_mcu_fan_set_cur_state(struct thermal_cooling_device *cdev,
+			     unsigned long state)
+{
+	struct khadas_mcu_fan_ctx *ctx = cdev->devdata;
+
+	if (!ctx || (state > MAX_LEVEL))
+		return -EINVAL;
+
+	if (state == ctx->level)
+		return 0;
+
+	return khadas_mcu_fan_set_level(ctx, state);
+}
+
+static const struct thermal_cooling_device_ops khadas_mcu_fan_cooling_ops = {
+	.get_max_state = khadas_mcu_fan_get_max_state,
+	.get_cur_state = khadas_mcu_fan_get_cur_state,
+	.set_cur_state = khadas_mcu_fan_set_cur_state,
+};
+
+static int khadas_mcu_fan_probe(struct platform_device *pdev)
+{
+	struct khadas_mcu *mcu = dev_get_drvdata(pdev->dev.parent);
+	struct thermal_cooling_device *cdev;
+	struct device *dev = &pdev->dev;
+	struct khadas_mcu_fan_ctx *ctx;
+	struct device *hwmon;
+	int ret;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+	ctx->mcu = mcu;
+	platform_set_drvdata(pdev, ctx);
+
+	hwmon = devm_hwmon_device_register_with_groups(dev, "khadas-mcu-fan",
+						       ctx,
+						       khadas_mcu_fan_groups);
+	if (IS_ERR(hwmon)) {
+		dev_err(dev, "Failed to register hwmon device\n");
+		return PTR_ERR(hwmon);
+	}
+
+	if (IS_ENABLED(CONFIG_THERMAL)) {
+		cdev = devm_thermal_of_cooling_device_register(dev->parent,
+			dev->parent->of_node, "khadas-mcu-fan", ctx,
+			&khadas_mcu_fan_cooling_ops);
+		if (IS_ERR(cdev)) {
+			ret = PTR_ERR(cdev);
+			dev_err(dev,
+				"Failed to register khadas-mcu-fan as cooling device: %d\n",
+				ret);
+			return ret;
+		}
+		ctx->cdev = cdev;
+		thermal_cdev_update(cdev);
+	}
+
+	return 0;
+}
+
+static int khadas_mcu_fan_disable(struct device *dev)
+{
+	struct khadas_mcu_fan_ctx *ctx = dev_get_drvdata(dev);
+	unsigned int level_save = ctx->level;
+	int ret;
+
+	ret = khadas_mcu_fan_set_level(ctx, 0);
+	if (ret)
+		return ret;
+
+	ctx->level = level_save;
+
+	return 0;
+}
+
+static void khadas_mcu_fan_shutdown(struct platform_device *pdev)
+{
+	khadas_mcu_fan_disable(&pdev->dev);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int khadas_mcu_fan_suspend(struct device *dev)
+{
+	return khadas_mcu_fan_disable(dev);
+}
+
+static int khadas_mcu_fan_resume(struct device *dev)
+{
+	struct khadas_mcu_fan_ctx *ctx = dev_get_drvdata(dev);
+
+	return khadas_mcu_fan_set_level(ctx, ctx->level);
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(khadas_mcu_fan_pm, khadas_mcu_fan_suspend,
+			 khadas_mcu_fan_resume);
+
+static const struct platform_device_id khadas_mcu_fan_id_table[] = {
+	{ .name = "khadas-mcu-fan-ctrl", },
+	{},
+};
+MODULE_DEVICE_TABLE(platform, khadas_mcu_fan_id_table);
+
+static struct platform_driver khadas_mcu_fan_driver = {
+	.probe		= khadas_mcu_fan_probe,
+	.shutdown	= khadas_mcu_fan_shutdown,
+	.driver	= {
+		.name		= "khadas-mcu-fan-ctrl",
+		.pm		= &khadas_mcu_fan_pm,
+	},
+	.id_table	= khadas_mcu_fan_id_table,
+};
+
+module_platform_driver(khadas_mcu_fan_driver);
+
+MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
+MODULE_DESCRIPTION("Khadas MCU FAN driver");
+MODULE_LICENSE("GPL");
-- 
2.22.0


^ permalink raw reply related	[flat|nested] 14+ messages in thread

* [RFC 4/8] nvmem: add support for the Khadas MCU Programmable User Memory
  2020-04-21  8:00 [RFC 0/8] mfd: Add support for Khadas Microcontroller Neil Armstrong
                   ` (2 preceding siblings ...)
  2020-04-21  8:00 ` [RFC 3/8] hwmon: add support for the MCU controlled FAN on Khadas boards Neil Armstrong
@ 2020-04-21  8:00 ` Neil Armstrong
  2020-04-21  8:00 ` [RFC 5/8] MAINTAINERS: add myself as maintainer for Khadas MCU drivers Neil Armstrong
                   ` (4 subsequent siblings)
  8 siblings, 0 replies; 14+ messages in thread
From: Neil Armstrong @ 2020-04-21  8:00 UTC (permalink / raw)
  To: lee.jones, jdelvare, linux, srinivas.kandagatla
  Cc: nick, art, Neil Armstrong, linux-amlogic, linux-hwmon,
	linux-arm-kernel, linux-kernel

The new Khadas VIM2, VIM3 and Edge boards embeds an on-board microcontroller
offering a 56bytes User Programmable NVMEM array.

This array needs a password to be writable, thus a password sysfs file
has been added on the device node to unlock the NVMEM.

The default 6bytes password id: "Khadas"

This implements the user NVMEM devices as cell of the Khadas MCU MFD driver.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/nvmem/Kconfig               |   8 ++
 drivers/nvmem/Makefile              |   2 +
 drivers/nvmem/khadas-mcu-user-mem.c | 128 ++++++++++++++++++++++++++++
 3 files changed, 138 insertions(+)
 create mode 100644 drivers/nvmem/khadas-mcu-user-mem.c

diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index d7b7f6d688e7..92cd4f6aa931 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -67,6 +67,14 @@ config JZ4780_EFUSE
 	  To compile this driver as a module, choose M here: the module
 	  will be called nvmem_jz4780_efuse.
 
+config NVMEM_KHADAS_MCU_USER_MEM
+	tristate "Khadas MCU User programmable memory support"
+	depends on MFD_KHADAS_MCU
+	depends on REGMAP
+	help
+	  This is a driver for the MCU User programmable memory
+	  available on the Khadas VIM and Edge boards.
+
 config NVMEM_LPC18XX_EEPROM
 	tristate "NXP LPC18XX EEPROM Memory Support"
 	depends on ARCH_LPC18XX || COMPILE_TEST
diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
index a7c377218341..0516a309542d 100644
--- a/drivers/nvmem/Makefile
+++ b/drivers/nvmem/Makefile
@@ -17,6 +17,8 @@ obj-$(CONFIG_NVMEM_IMX_OCOTP_SCU)	+= nvmem-imx-ocotp-scu.o
 nvmem-imx-ocotp-scu-y		:= imx-ocotp-scu.o
 obj-$(CONFIG_JZ4780_EFUSE)		+= nvmem_jz4780_efuse.o
 nvmem_jz4780_efuse-y		:= jz4780-efuse.o
+obj-$(CONFIG_NVMEM_KHADAS_MCU_USER_MEM)	+= nvmem-khadas-mcu-user-mem.o
+nvmem-khadas-mcu-user-mem-y	:= khadas-mcu-user-mem.o
 obj-$(CONFIG_NVMEM_LPC18XX_EEPROM)	+= nvmem_lpc18xx_eeprom.o
 nvmem_lpc18xx_eeprom-y	:= lpc18xx_eeprom.o
 obj-$(CONFIG_NVMEM_LPC18XX_OTP)	+= nvmem_lpc18xx_otp.o
diff --git a/drivers/nvmem/khadas-mcu-user-mem.c b/drivers/nvmem/khadas-mcu-user-mem.c
new file mode 100644
index 000000000000..a1d5ae9a030c
--- /dev/null
+++ b/drivers/nvmem/khadas-mcu-user-mem.c
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for Khadas MCU User programmable Memory
+ *
+ * Copyright (C) 2020 BayLibre SAS
+ * Author(s): Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/mfd/khadas-mcu.h>
+#include <linux/regmap.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+static int khadas_mcu_user_mem_read(void *context, unsigned int offset,
+			    void *val, size_t bytes)
+{
+	struct khadas_mcu *khadas_mcu = context;
+
+	return regmap_bulk_read(khadas_mcu->map,
+				KHADAS_MCU_USER_DATA_0_REG + offset,
+				val, bytes);
+}
+
+static int khadas_mcu_user_mem_write(void *context, unsigned int offset,
+			     void *val, size_t bytes)
+{
+	struct khadas_mcu *khadas_mcu = context;
+
+	return regmap_bulk_write(khadas_mcu->map,
+				KHADAS_MCU_USER_DATA_0_REG + offset,
+				val, bytes);
+}
+
+static ssize_t password_store(struct device *dev, struct device_attribute *attr,
+			     const char *buf, size_t count)
+{
+	struct khadas_mcu *khadas_mcu = dev_get_drvdata(dev);
+	int i, ret;
+
+	if (count < 6)
+		return -EINVAL;
+
+	ret = regmap_write(khadas_mcu->map, KHADAS_MCU_PASSWD_START_REG, 1);
+	if (ret)
+		return ret;
+
+	for (i = 0 ; i < 6 ; ++i) {
+		ret = regmap_write(khadas_mcu->map,
+				   KHADAS_MCU_CHECK_USER_PASSWD_REG,
+				   buf[i]);
+		if (ret)
+			goto out;
+	}
+
+	ret = regmap_write(khadas_mcu->map, KHADAS_MCU_PASSWD_START_REG, 0);
+	if (ret)
+		return ret;
+
+	return count;
+out:
+	regmap_write(khadas_mcu->map, KHADAS_MCU_PASSWD_START_REG, 0);
+
+	return ret;
+}
+
+static DEVICE_ATTR_WO(password);
+
+static struct attribute *khadas_mcu_user_mem_sysfs_attributes[] = {
+	&dev_attr_password.attr,
+	NULL,
+};
+
+static const struct attribute_group khadas_mcu_user_mem_sysfs_attr_group = {
+	.attrs = khadas_mcu_user_mem_sysfs_attributes,
+};
+
+static int khadas_mcu_user_mem_probe(struct platform_device *pdev)
+{
+	struct khadas_mcu *khadas_mcu = dev_get_drvdata(pdev->dev.parent);
+	struct device *dev = &pdev->dev;
+	struct nvmem_device *nvmem;
+	struct nvmem_config *econfig;
+
+	econfig = devm_kzalloc(dev, sizeof(*econfig), GFP_KERNEL);
+	if (!econfig)
+		return -ENOMEM;
+
+	econfig->dev = pdev->dev.parent;
+	econfig->name = dev_name(pdev->dev.parent);
+	econfig->stride = 1;
+	econfig->word_size = 1;
+	econfig->reg_read = khadas_mcu_user_mem_read;
+	econfig->reg_write = khadas_mcu_user_mem_write;
+	econfig->size = 56;
+	econfig->priv = khadas_mcu;
+
+	platform_set_drvdata(pdev, khadas_mcu);
+
+	nvmem = devm_nvmem_register(&pdev->dev, econfig);
+	if (IS_ERR(nvmem))
+		return PTR_ERR(nvmem);
+
+	return sysfs_create_group(&pdev->dev.kobj,
+				  &khadas_mcu_user_mem_sysfs_attr_group);
+}
+
+static const struct platform_device_id khadas_mcu_user_mem_id_table[] = {
+	{ .name = "khadas-mcu-user-mem", },
+	{},
+};
+MODULE_DEVICE_TABLE(platform, khadas_mcu_user_mem_id_table);
+
+static struct platform_driver khadas_mcu_user_mem_driver = {
+	.probe = khadas_mcu_user_mem_probe,
+	.driver = {
+		.name = "khadas-mcu-user-mem",
+	},
+	.id_table = khadas_mcu_user_mem_id_table,
+};
+
+module_platform_driver(khadas_mcu_user_mem_driver);
+
+MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
+MODULE_DESCRIPTION("Khadas MCU User MEM driver");
+MODULE_LICENSE("GPL v2");
-- 
2.22.0


^ permalink raw reply related	[flat|nested] 14+ messages in thread

* [RFC 5/8] MAINTAINERS: add myself as maintainer for Khadas MCU drivers
  2020-04-21  8:00 [RFC 0/8] mfd: Add support for Khadas Microcontroller Neil Armstrong
                   ` (3 preceding siblings ...)
  2020-04-21  8:00 ` [RFC 4/8] nvmem: add support for the Khadas MCU Programmable User Memory Neil Armstrong
@ 2020-04-21  8:00 ` Neil Armstrong
  2020-04-21  8:01 ` [RFC 6/8] arm64: dts: meson-g12b: move G12B thermal nodes to meson-g12b.dtsi Neil Armstrong
                   ` (3 subsequent siblings)
  8 siblings, 0 replies; 14+ messages in thread
From: Neil Armstrong @ 2020-04-21  8:00 UTC (permalink / raw)
  To: lee.jones, jdelvare, linux, srinivas.kandagatla
  Cc: nick, art, Neil Armstrong, linux-amlogic, linux-hwmon,
	linux-arm-kernel, linux-kernel

Add the HWMON and NVMEM drivers along the MFD drivers and header
as Maintained by myself.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 MAINTAINERS | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index b816a453b10e..4484fa568d42 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9431,6 +9431,17 @@ F:	include/linux/kdb.h
 F:	include/linux/kgdb.h
 F:	kernel/debug/
 
+KHADAS MCU MFD DRIVER
+M:	Neil Armstrong <narmstrong@baylibre.com>
+L:	linux-amlogic@lists.infradead.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/mfd/khadas,mcu.yaml
+F:	drivers/mfd/khadas-mcu.c
+F:	include/linux/mfd/khadas-mcu.h
+F:	drivers/hwmon/khadas-mcu-fan.c
+F:	drivers/nvmem/khadas-mcu-user-mem.c
+
 KMEMLEAK
 M:	Catalin Marinas <catalin.marinas@arm.com>
 S:	Maintained
-- 
2.22.0


^ permalink raw reply related	[flat|nested] 14+ messages in thread

* [RFC 6/8] arm64: dts: meson-g12b: move G12B thermal nodes to meson-g12b.dtsi
  2020-04-21  8:00 [RFC 0/8] mfd: Add support for Khadas Microcontroller Neil Armstrong
                   ` (4 preceding siblings ...)
  2020-04-21  8:00 ` [RFC 5/8] MAINTAINERS: add myself as maintainer for Khadas MCU drivers Neil Armstrong
@ 2020-04-21  8:01 ` Neil Armstrong
  2020-04-21  8:01 ` [RFC 7/8] arm64: dts: meson-sm1: add cpu thermal nodes Neil Armstrong
                   ` (2 subsequent siblings)
  8 siblings, 0 replies; 14+ messages in thread
From: Neil Armstrong @ 2020-04-21  8:01 UTC (permalink / raw)
  To: khilman
  Cc: nick, art, Neil Armstrong, linux-amlogic, linux-hwmon,
	linux-arm-kernel, linux-kernel

The G12B thermal nodes should be in the meson-g12b.dtsi file.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-g12.dtsi  | 23 ---------------------
 arch/arm64/boot/dts/amlogic/meson-g12b.dtsi | 22 ++++++++++++++++++++
 2 files changed, 22 insertions(+), 23 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
index 783e5a397f86..e932205badea 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
@@ -355,29 +355,6 @@
 	};
 };
 
-&cpu_thermal {
-	cooling-maps {
-		map0 {
-			trip = <&cpu_passive>;
-			cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-					 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-					 <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-					 <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-					 <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-					 <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-		};
-		map1 {
-			trip = <&cpu_hot>;
-			cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-					 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-					 <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-					 <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-					 <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-					 <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-		};
-	};
-};
-
 &ethmac {
 	power-domains = <&pwrc PWRC_G12A_ETH_ID>;
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
index 6dbc3968045b..9b8548e5f6e5 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
@@ -113,3 +113,25 @@
 	compatible = "amlogic,g12b-clkc";
 };
 
+&cpu_thermal {
+	cooling-maps {
+		map0 {
+			trip = <&cpu_passive>;
+			cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					 <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					 <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					 <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					 <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+		map1 {
+			trip = <&cpu_hot>;
+			cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					 <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					 <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					 <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					 <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
-- 
2.22.0


^ permalink raw reply related	[flat|nested] 14+ messages in thread

* [RFC 7/8] arm64: dts: meson-sm1: add cpu thermal nodes
  2020-04-21  8:00 [RFC 0/8] mfd: Add support for Khadas Microcontroller Neil Armstrong
                   ` (5 preceding siblings ...)
  2020-04-21  8:01 ` [RFC 6/8] arm64: dts: meson-g12b: move G12B thermal nodes to meson-g12b.dtsi Neil Armstrong
@ 2020-04-21  8:01 ` Neil Armstrong
  2020-04-21  8:01 ` [RFC 8/8] arm64: dts: meson-khadas-vim3: add Khadas MCU nodes Neil Armstrong
  2020-04-29 19:16 ` [RFC 0/8] mfd: Add support for Khadas Microcontroller Kevin Hilman
  8 siblings, 0 replies; 14+ messages in thread
From: Neil Armstrong @ 2020-04-21  8:01 UTC (permalink / raw)
  To: khilman
  Cc: nick, art, Neil Armstrong, linux-amlogic, linux-hwmon,
	linux-arm-kernel, linux-kernel

Add thermal nodes for the Amlogic SM1 SoCs based on the G12A and G12B
thermal nodes.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-sm1.dtsi | 24 ++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
index d4ec735fb1a5..71317f5aada1 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
@@ -56,6 +56,7 @@
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
@@ -64,6 +65,7 @@
 			reg = <0x0 0x1>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
@@ -72,6 +74,7 @@
 			reg = <0x0 0x2>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
@@ -80,6 +83,7 @@
 			reg = <0x0 0x3>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
 		};
 
 		l2: l2-cache0 {
@@ -466,6 +470,26 @@
 	compatible = "amlogic,sm1-clkc";
 };
 
+&cpu_thermal {
+	cooling-maps {
+		map0 {
+			trip = <&cpu_passive>;
+			cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+
+		map1 {
+			trip = <&cpu_hot>;
+			cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
 &ethmac {
 	power-domains = <&pwrc PWRC_SM1_ETH_ID>;
 };
-- 
2.22.0


^ permalink raw reply related	[flat|nested] 14+ messages in thread

* [RFC 8/8] arm64: dts: meson-khadas-vim3: add Khadas MCU nodes
  2020-04-21  8:00 [RFC 0/8] mfd: Add support for Khadas Microcontroller Neil Armstrong
                   ` (6 preceding siblings ...)
  2020-04-21  8:01 ` [RFC 7/8] arm64: dts: meson-sm1: add cpu thermal nodes Neil Armstrong
@ 2020-04-21  8:01 ` Neil Armstrong
  2020-04-29 19:16 ` [RFC 0/8] mfd: Add support for Khadas Microcontroller Kevin Hilman
  8 siblings, 0 replies; 14+ messages in thread
From: Neil Armstrong @ 2020-04-21  8:01 UTC (permalink / raw)
  To: khilman
  Cc: nick, art, Neil Armstrong, linux-amlogic, linux-hwmon,
	linux-arm-kernel, linux-kernel

Add the Khadas MCU node with active FAN thermal nodes for all the
Khadas VIM3 variants.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../boot/dts/amlogic/meson-khadas-vim3.dtsi   | 23 +++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
index 094ecf2222bb..3325e54ea690 100644
--- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
@@ -183,6 +183,23 @@
 	hdmi-phandle = <&hdmi_tx>;
 };
 
+&cpu_thermal {
+	trips {
+		cpu_active: cpu-active {
+			temperature = <80000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map {
+			trip = <&cpu_active>;
+			cooling-device = <&khadas_mcu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
 &ext_mdio {
 	external_phy: ethernet-phy@0 {
 		/* Realtek RTL8211F (0x001cc916) */
@@ -222,6 +239,12 @@
 	pinctrl-0 = <&i2c_ao_sck_pins>, <&i2c_ao_sda_pins>;
 	pinctrl-names = "default";
 
+	khadas_mcu: system-controller@18 {
+		compatible = "khadas,mcu";
+		reg = <0x18>;
+		#cooling-cells = <2>;
+	};
+
 	gpio_expander: gpio-controller@20 {
 		compatible = "ti,tca6408";
 		reg = <0x20>;
-- 
2.22.0


^ permalink raw reply related	[flat|nested] 14+ messages in thread

* Re: [RFC 3/8] hwmon: add support for the MCU controlled FAN on Khadas boards
  2020-04-21  8:00 ` [RFC 3/8] hwmon: add support for the MCU controlled FAN on Khadas boards Neil Armstrong
@ 2020-04-21  9:24   ` Guenter Roeck
  2020-04-28 12:58     ` Neil Armstrong
  0 siblings, 1 reply; 14+ messages in thread
From: Guenter Roeck @ 2020-04-21  9:24 UTC (permalink / raw)
  To: Neil Armstrong, lee.jones, jdelvare, srinivas.kandagatla
  Cc: nick, art, linux-amlogic, linux-hwmon, linux-arm-kernel, linux-kernel

On 4/21/20 1:00 AM, Neil Armstrong wrote:
> The new Khadas VIM2 and VIM3 boards controls the cooling fan via the
> on-board microcontroller.
> 
> This implements the FAN control as HWMON devices as cell of the Khadas
> MCU MFD driver.
> 
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

This should be a thermal driver, not a hwmon driver.
I don't see a single standard hwmon attribute, making
the driver quite pointless as hwmon device.

Guenter

> ---
>  drivers/hwmon/Kconfig          |   9 ++
>  drivers/hwmon/Makefile         |   1 +
>  drivers/hwmon/khadas-mcu-fan.c | 230 +++++++++++++++++++++++++++++++++
>  3 files changed, 240 insertions(+)
>  create mode 100644 drivers/hwmon/khadas-mcu-fan.c
> 
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 4c62f900bf7e..7f63ff7bb732 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -1997,6 +1997,15 @@ config SENSORS_XGENE
>  	  If you say yes here you get support for the temperature
>  	  and power sensors for APM X-Gene SoC.
>  
> +config SENSORS_KHADAS_MCU_FAN
> +	tristate "Khadas MCU controller FAN driver"
> +	depends on OF || COMPILE_TEST
> +	select MFD_CORE
> +	select REGMAP
> +	help
> +	  If you say yes here you get support for the FAN controlled
> +	  by the Microcontroller found on the Khadas VIM boards.
> +
>  if ACPI
>  
>  comment "ACPI drivers"
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index b0b9c8e57176..20db40f6d57f 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -185,6 +185,7 @@ obj-$(CONFIG_SENSORS_W83L786NG)	+= w83l786ng.o
>  obj-$(CONFIG_SENSORS_WM831X)	+= wm831x-hwmon.o
>  obj-$(CONFIG_SENSORS_WM8350)	+= wm8350-hwmon.o
>  obj-$(CONFIG_SENSORS_XGENE)	+= xgene-hwmon.o
> +obj-$(CONFIG_SENSORS_KHADAS_MCU_FAN)	+= khadas-mcu-fan.o
>  
>  obj-$(CONFIG_SENSORS_OCC)	+= occ/
>  obj-$(CONFIG_PMBUS)		+= pmbus/
> diff --git a/drivers/hwmon/khadas-mcu-fan.c b/drivers/hwmon/khadas-mcu-fan.c
> new file mode 100644
> index 000000000000..dd92b2bcb7e3
> --- /dev/null
> +++ b/drivers/hwmon/khadas-mcu-fan.c
> @@ -0,0 +1,230 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Khadas MCU Controlled FAN driver
> + *
> + * Copyright (C) 2020 BayLibre SAS
> + * Author(s): Neil Armstrong <narmstrong@baylibre.com>
> + */
> +
> +#include <linux/hwmon.h>
> +#include <linux/hwmon-sysfs.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/mfd/khadas-mcu.h>
> +#include <linux/regmap.h>
> +#include <linux/sysfs.h>
> +#include <linux/thermal.h>
> +
> +#define MAX_LEVEL 3
> +
> +struct khadas_mcu_fan_ctx {
> +	struct khadas_mcu *mcu;
> +	unsigned int level;
> +	struct thermal_cooling_device *cdev;
> +};
> +
> +static int khadas_mcu_fan_set_level(struct khadas_mcu_fan_ctx *ctx,
> +				    unsigned int level)
> +{
> +	int ret;
> +
> +	ret = regmap_write(ctx->mcu->map, KHADAS_MCU_CMD_FAN_STATUS_CTRL_REG,
> +			   level);
> +	if (ret)
> +		return ret;
> +
> +	ctx->level = level;
> +
> +	return 0;
> +}
> +
> +static ssize_t level_store(struct device *dev, struct device_attribute *attr,
> +			   const char *buf, size_t count)
> +{
> +	struct khadas_mcu_fan_ctx *ctx = dev_get_drvdata(dev);
> +	unsigned long level;
> +	int ret;
> +
> +	if (kstrtoul(buf, 10, &level) || level > MAX_LEVEL)
> +		return -EINVAL;
> +
> +	ret = khadas_mcu_fan_set_level(ctx, level);
> +	if (ret < 0)
> +		return ret;
> +
> +	return count;
> +}
> +
> +static ssize_t level_show(struct device *dev, struct device_attribute *attr,
> +			  char *buf)
> +{
> +	struct khadas_mcu_fan_ctx *ctx = dev_get_drvdata(dev);
> +
> +	return sprintf(buf, "%u\n", ctx->level);
> +}
> +
> +static SENSOR_DEVICE_ATTR_RW(level1, level, 0);
> +
> +static struct attribute *khadas_mcu_fan_attrs[] = {
> +	&sensor_dev_attr_level1.dev_attr.attr,
> +	NULL,
> +};
> +
> +static const struct attribute_group khadas_mcu_fan_group = {
> +	.attrs = khadas_mcu_fan_attrs,
> +};
> +
> +static const struct attribute_group *khadas_mcu_fan_groups[] = {
> +	&khadas_mcu_fan_group,
> +	NULL,
> +};
> +
> +/* thermal cooling device callbacks */
> +static int khadas_mcu_fan_get_max_state(struct thermal_cooling_device *cdev,
> +					unsigned long *state)
> +{
> +	struct khadas_mcu_fan_ctx *ctx = cdev->devdata;
> +
> +	if (!ctx)
> +		return -EINVAL;
> +
> +	*state = MAX_LEVEL;
> +
> +	return 0;
> +}
> +
> +static int khadas_mcu_fan_get_cur_state(struct thermal_cooling_device *cdev,
> +					unsigned long *state)
> +{
> +	struct khadas_mcu_fan_ctx *ctx = cdev->devdata;
> +
> +	if (!ctx)
> +		return -EINVAL;
> +
> +	*state = ctx->level;
> +
> +	return 0;
> +}
> +
> +static int
> +khadas_mcu_fan_set_cur_state(struct thermal_cooling_device *cdev,
> +			     unsigned long state)
> +{
> +	struct khadas_mcu_fan_ctx *ctx = cdev->devdata;
> +
> +	if (!ctx || (state > MAX_LEVEL))
> +		return -EINVAL;
> +
> +	if (state == ctx->level)
> +		return 0;
> +
> +	return khadas_mcu_fan_set_level(ctx, state);
> +}
> +
> +static const struct thermal_cooling_device_ops khadas_mcu_fan_cooling_ops = {
> +	.get_max_state = khadas_mcu_fan_get_max_state,
> +	.get_cur_state = khadas_mcu_fan_get_cur_state,
> +	.set_cur_state = khadas_mcu_fan_set_cur_state,
> +};
> +
> +static int khadas_mcu_fan_probe(struct platform_device *pdev)
> +{
> +	struct khadas_mcu *mcu = dev_get_drvdata(pdev->dev.parent);
> +	struct thermal_cooling_device *cdev;
> +	struct device *dev = &pdev->dev;
> +	struct khadas_mcu_fan_ctx *ctx;
> +	struct device *hwmon;
> +	int ret;
> +
> +	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
> +	if (!ctx)
> +		return -ENOMEM;
> +	ctx->mcu = mcu;
> +	platform_set_drvdata(pdev, ctx);
> +
> +	hwmon = devm_hwmon_device_register_with_groups(dev, "khadas-mcu-fan",
> +						       ctx,
> +						       khadas_mcu_fan_groups);
> +	if (IS_ERR(hwmon)) {
> +		dev_err(dev, "Failed to register hwmon device\n");
> +		return PTR_ERR(hwmon);
> +	}
> +
> +	if (IS_ENABLED(CONFIG_THERMAL)) {
> +		cdev = devm_thermal_of_cooling_device_register(dev->parent,
> +			dev->parent->of_node, "khadas-mcu-fan", ctx,
> +			&khadas_mcu_fan_cooling_ops);
> +		if (IS_ERR(cdev)) {
> +			ret = PTR_ERR(cdev);
> +			dev_err(dev,
> +				"Failed to register khadas-mcu-fan as cooling device: %d\n",
> +				ret);
> +			return ret;
> +		}
> +		ctx->cdev = cdev;
> +		thermal_cdev_update(cdev);
> +	}
> +
> +	return 0;
> +}
> +
> +static int khadas_mcu_fan_disable(struct device *dev)
> +{
> +	struct khadas_mcu_fan_ctx *ctx = dev_get_drvdata(dev);
> +	unsigned int level_save = ctx->level;
> +	int ret;
> +
> +	ret = khadas_mcu_fan_set_level(ctx, 0);
> +	if (ret)
> +		return ret;
> +
> +	ctx->level = level_save;
> +
> +	return 0;
> +}
> +
> +static void khadas_mcu_fan_shutdown(struct platform_device *pdev)
> +{
> +	khadas_mcu_fan_disable(&pdev->dev);
> +}
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int khadas_mcu_fan_suspend(struct device *dev)
> +{
> +	return khadas_mcu_fan_disable(dev);
> +}
> +
> +static int khadas_mcu_fan_resume(struct device *dev)
> +{
> +	struct khadas_mcu_fan_ctx *ctx = dev_get_drvdata(dev);
> +
> +	return khadas_mcu_fan_set_level(ctx, ctx->level);
> +}
> +#endif
> +
> +static SIMPLE_DEV_PM_OPS(khadas_mcu_fan_pm, khadas_mcu_fan_suspend,
> +			 khadas_mcu_fan_resume);
> +
> +static const struct platform_device_id khadas_mcu_fan_id_table[] = {
> +	{ .name = "khadas-mcu-fan-ctrl", },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(platform, khadas_mcu_fan_id_table);
> +
> +static struct platform_driver khadas_mcu_fan_driver = {
> +	.probe		= khadas_mcu_fan_probe,
> +	.shutdown	= khadas_mcu_fan_shutdown,
> +	.driver	= {
> +		.name		= "khadas-mcu-fan-ctrl",
> +		.pm		= &khadas_mcu_fan_pm,
> +	},
> +	.id_table	= khadas_mcu_fan_id_table,
> +};
> +
> +module_platform_driver(khadas_mcu_fan_driver);
> +
> +MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
> +MODULE_DESCRIPTION("Khadas MCU FAN driver");
> +MODULE_LICENSE("GPL");
> 


^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [RFC 3/8] hwmon: add support for the MCU controlled FAN on Khadas boards
  2020-04-21  9:24   ` Guenter Roeck
@ 2020-04-28 12:58     ` Neil Armstrong
  0 siblings, 0 replies; 14+ messages in thread
From: Neil Armstrong @ 2020-04-28 12:58 UTC (permalink / raw)
  To: Guenter Roeck, lee.jones, jdelvare, srinivas.kandagatla
  Cc: nick, art, linux-amlogic, linux-hwmon, linux-arm-kernel, linux-kernel

On 21/04/2020 11:24, Guenter Roeck wrote:
> On 4/21/20 1:00 AM, Neil Armstrong wrote:
>> The new Khadas VIM2 and VIM3 boards controls the cooling fan via the
>> on-board microcontroller.
>>
>> This implements the FAN control as HWMON devices as cell of the Khadas
>> MCU MFD driver.
>>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> 
> This should be a thermal driver, not a hwmon driver.
> I don't see a single standard hwmon attribute, making
> the driver quite pointless as hwmon device.

Sure,

Neil

> 
> Guenter
> 
>> ---
>>  drivers/hwmon/Kconfig          |   9 ++
>>  drivers/hwmon/Makefile         |   1 +
>>  drivers/hwmon/khadas-mcu-fan.c | 230 +++++++++++++++++++++++++++++++++
>>  3 files changed, 240 insertions(+)
>>  create mode 100644 drivers/hwmon/khadas-mcu-fan.c
>>
>> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
>> index 4c62f900bf7e..7f63ff7bb732 100644
>> --- a/drivers/hwmon/Kconfig
>> +++ b/drivers/hwmon/Kconfig
>> @@ -1997,6 +1997,15 @@ config SENSORS_XGENE
>>  	  If you say yes here you get support for the temperature
>>  	  and power sensors for APM X-Gene SoC.
>>  
>> +config SENSORS_KHADAS_MCU_FAN
>> +	tristate "Khadas MCU controller FAN driver"
>> +	depends on OF || COMPILE_TEST
>> +	select MFD_CORE
>> +	select REGMAP
>> +	help
>> +	  If you say yes here you get support for the FAN controlled
>> +	  by the Microcontroller found on the Khadas VIM boards.
>> +
>>  if ACPI
>>  
>>  comment "ACPI drivers"
>> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
>> index b0b9c8e57176..20db40f6d57f 100644
>> --- a/drivers/hwmon/Makefile
>> +++ b/drivers/hwmon/Makefile
>> @@ -185,6 +185,7 @@ obj-$(CONFIG_SENSORS_W83L786NG)	+= w83l786ng.o
>>  obj-$(CONFIG_SENSORS_WM831X)	+= wm831x-hwmon.o
>>  obj-$(CONFIG_SENSORS_WM8350)	+= wm8350-hwmon.o
>>  obj-$(CONFIG_SENSORS_XGENE)	+= xgene-hwmon.o
>> +obj-$(CONFIG_SENSORS_KHADAS_MCU_FAN)	+= khadas-mcu-fan.o
>>  
>>  obj-$(CONFIG_SENSORS_OCC)	+= occ/
>>  obj-$(CONFIG_PMBUS)		+= pmbus/
>> diff --git a/drivers/hwmon/khadas-mcu-fan.c b/drivers/hwmon/khadas-mcu-fan.c
>> new file mode 100644
>> index 000000000000..dd92b2bcb7e3
>> --- /dev/null
>> +++ b/drivers/hwmon/khadas-mcu-fan.c
>> @@ -0,0 +1,230 @@
>> +// SPDX-License-Identifier: GPL-2.0-or-later
>> +/*
>> + * Khadas MCU Controlled FAN driver
>> + *
>> + * Copyright (C) 2020 BayLibre SAS
>> + * Author(s): Neil Armstrong <narmstrong@baylibre.com>
>> + */
>> +
>> +#include <linux/hwmon.h>
>> +#include <linux/hwmon-sysfs.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/regulator/consumer.h>
>> +#include <linux/mfd/khadas-mcu.h>
>> +#include <linux/regmap.h>
>> +#include <linux/sysfs.h>
>> +#include <linux/thermal.h>
>> +
>> +#define MAX_LEVEL 3
>> +
>> +struct khadas_mcu_fan_ctx {
>> +	struct khadas_mcu *mcu;
>> +	unsigned int level;
>> +	struct thermal_cooling_device *cdev;
>> +};
>> +
>> +static int khadas_mcu_fan_set_level(struct khadas_mcu_fan_ctx *ctx,
>> +				    unsigned int level)
>> +{
>> +	int ret;
>> +
>> +	ret = regmap_write(ctx->mcu->map, KHADAS_MCU_CMD_FAN_STATUS_CTRL_REG,
>> +			   level);
>> +	if (ret)
>> +		return ret;
>> +
>> +	ctx->level = level;
>> +
>> +	return 0;
>> +}
>> +
>> +static ssize_t level_store(struct device *dev, struct device_attribute *attr,
>> +			   const char *buf, size_t count)
>> +{
>> +	struct khadas_mcu_fan_ctx *ctx = dev_get_drvdata(dev);
>> +	unsigned long level;
>> +	int ret;
>> +
>> +	if (kstrtoul(buf, 10, &level) || level > MAX_LEVEL)
>> +		return -EINVAL;
>> +
>> +	ret = khadas_mcu_fan_set_level(ctx, level);
>> +	if (ret < 0)
>> +		return ret;
>> +
>> +	return count;
>> +}
>> +
>> +static ssize_t level_show(struct device *dev, struct device_attribute *attr,
>> +			  char *buf)
>> +{
>> +	struct khadas_mcu_fan_ctx *ctx = dev_get_drvdata(dev);
>> +
>> +	return sprintf(buf, "%u\n", ctx->level);
>> +}
>> +
>> +static SENSOR_DEVICE_ATTR_RW(level1, level, 0);
>> +
>> +static struct attribute *khadas_mcu_fan_attrs[] = {
>> +	&sensor_dev_attr_level1.dev_attr.attr,
>> +	NULL,
>> +};
>> +
>> +static const struct attribute_group khadas_mcu_fan_group = {
>> +	.attrs = khadas_mcu_fan_attrs,
>> +};
>> +
>> +static const struct attribute_group *khadas_mcu_fan_groups[] = {
>> +	&khadas_mcu_fan_group,
>> +	NULL,
>> +};
>> +
>> +/* thermal cooling device callbacks */
>> +static int khadas_mcu_fan_get_max_state(struct thermal_cooling_device *cdev,
>> +					unsigned long *state)
>> +{
>> +	struct khadas_mcu_fan_ctx *ctx = cdev->devdata;
>> +
>> +	if (!ctx)
>> +		return -EINVAL;
>> +
>> +	*state = MAX_LEVEL;
>> +
>> +	return 0;
>> +}
>> +
>> +static int khadas_mcu_fan_get_cur_state(struct thermal_cooling_device *cdev,
>> +					unsigned long *state)
>> +{
>> +	struct khadas_mcu_fan_ctx *ctx = cdev->devdata;
>> +
>> +	if (!ctx)
>> +		return -EINVAL;
>> +
>> +	*state = ctx->level;
>> +
>> +	return 0;
>> +}
>> +
>> +static int
>> +khadas_mcu_fan_set_cur_state(struct thermal_cooling_device *cdev,
>> +			     unsigned long state)
>> +{
>> +	struct khadas_mcu_fan_ctx *ctx = cdev->devdata;
>> +
>> +	if (!ctx || (state > MAX_LEVEL))
>> +		return -EINVAL;
>> +
>> +	if (state == ctx->level)
>> +		return 0;
>> +
>> +	return khadas_mcu_fan_set_level(ctx, state);
>> +}
>> +
>> +static const struct thermal_cooling_device_ops khadas_mcu_fan_cooling_ops = {
>> +	.get_max_state = khadas_mcu_fan_get_max_state,
>> +	.get_cur_state = khadas_mcu_fan_get_cur_state,
>> +	.set_cur_state = khadas_mcu_fan_set_cur_state,
>> +};
>> +
>> +static int khadas_mcu_fan_probe(struct platform_device *pdev)
>> +{
>> +	struct khadas_mcu *mcu = dev_get_drvdata(pdev->dev.parent);
>> +	struct thermal_cooling_device *cdev;
>> +	struct device *dev = &pdev->dev;
>> +	struct khadas_mcu_fan_ctx *ctx;
>> +	struct device *hwmon;
>> +	int ret;
>> +
>> +	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
>> +	if (!ctx)
>> +		return -ENOMEM;
>> +	ctx->mcu = mcu;
>> +	platform_set_drvdata(pdev, ctx);
>> +
>> +	hwmon = devm_hwmon_device_register_with_groups(dev, "khadas-mcu-fan",
>> +						       ctx,
>> +						       khadas_mcu_fan_groups);
>> +	if (IS_ERR(hwmon)) {
>> +		dev_err(dev, "Failed to register hwmon device\n");
>> +		return PTR_ERR(hwmon);
>> +	}
>> +
>> +	if (IS_ENABLED(CONFIG_THERMAL)) {
>> +		cdev = devm_thermal_of_cooling_device_register(dev->parent,
>> +			dev->parent->of_node, "khadas-mcu-fan", ctx,
>> +			&khadas_mcu_fan_cooling_ops);
>> +		if (IS_ERR(cdev)) {
>> +			ret = PTR_ERR(cdev);
>> +			dev_err(dev,
>> +				"Failed to register khadas-mcu-fan as cooling device: %d\n",
>> +				ret);
>> +			return ret;
>> +		}
>> +		ctx->cdev = cdev;
>> +		thermal_cdev_update(cdev);
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static int khadas_mcu_fan_disable(struct device *dev)
>> +{
>> +	struct khadas_mcu_fan_ctx *ctx = dev_get_drvdata(dev);
>> +	unsigned int level_save = ctx->level;
>> +	int ret;
>> +
>> +	ret = khadas_mcu_fan_set_level(ctx, 0);
>> +	if (ret)
>> +		return ret;
>> +
>> +	ctx->level = level_save;
>> +
>> +	return 0;
>> +}
>> +
>> +static void khadas_mcu_fan_shutdown(struct platform_device *pdev)
>> +{
>> +	khadas_mcu_fan_disable(&pdev->dev);
>> +}
>> +
>> +#ifdef CONFIG_PM_SLEEP
>> +static int khadas_mcu_fan_suspend(struct device *dev)
>> +{
>> +	return khadas_mcu_fan_disable(dev);
>> +}
>> +
>> +static int khadas_mcu_fan_resume(struct device *dev)
>> +{
>> +	struct khadas_mcu_fan_ctx *ctx = dev_get_drvdata(dev);
>> +
>> +	return khadas_mcu_fan_set_level(ctx, ctx->level);
>> +}
>> +#endif
>> +
>> +static SIMPLE_DEV_PM_OPS(khadas_mcu_fan_pm, khadas_mcu_fan_suspend,
>> +			 khadas_mcu_fan_resume);
>> +
>> +static const struct platform_device_id khadas_mcu_fan_id_table[] = {
>> +	{ .name = "khadas-mcu-fan-ctrl", },
>> +	{},
>> +};
>> +MODULE_DEVICE_TABLE(platform, khadas_mcu_fan_id_table);
>> +
>> +static struct platform_driver khadas_mcu_fan_driver = {
>> +	.probe		= khadas_mcu_fan_probe,
>> +	.shutdown	= khadas_mcu_fan_shutdown,
>> +	.driver	= {
>> +		.name		= "khadas-mcu-fan-ctrl",
>> +		.pm		= &khadas_mcu_fan_pm,
>> +	},
>> +	.id_table	= khadas_mcu_fan_id_table,
>> +};
>> +
>> +module_platform_driver(khadas_mcu_fan_driver);
>> +
>> +MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
>> +MODULE_DESCRIPTION("Khadas MCU FAN driver");
>> +MODULE_LICENSE("GPL");
>>
> 


^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [RFC 0/8] mfd: Add support for Khadas Microcontroller
  2020-04-21  8:00 [RFC 0/8] mfd: Add support for Khadas Microcontroller Neil Armstrong
                   ` (7 preceding siblings ...)
  2020-04-21  8:01 ` [RFC 8/8] arm64: dts: meson-khadas-vim3: add Khadas MCU nodes Neil Armstrong
@ 2020-04-29 19:16 ` Kevin Hilman
  2020-05-07  7:44   ` Neil Armstrong
  8 siblings, 1 reply; 14+ messages in thread
From: Kevin Hilman @ 2020-04-29 19:16 UTC (permalink / raw)
  To: Neil Armstrong, lee.jones, jdelvare, linux, srinivas.kandagatla
  Cc: nick, art, Neil Armstrong, linux-amlogic, linux-hwmon,
	linux-arm-kernel, linux-kernel

Neil Armstrong <narmstrong@baylibre.com> writes:

> The new Khadas VIM2, VIM3 and Edge boards embeds an on-board microcontroller
> connected via I2C.
>
> This Microcontroller is present on the Khadas VIM1, VIM2, VIM3 and Edge
> boards.
>
> It has multiple boot control features like password check, power-on
> options, power-off control and system FAN control on recent boards.
>
> Thie serie adds :
> - the bindings
> - the MFD driver
> - the HWMON cell driver
> - the NVMEM cell driver
> - updates MAINTAINERS
> - add support into the Khadas VIM3/VIM3L DT
>
> Neil Armstrong (8):
>   dt-bindings: mfd: add Khadas Microcontroller bindings
>   mfd: add support for the Khadas System control Microcontroller
>   hwmon: add support for the MCU controlled FAN on Khadas boards
>   nvmem: add support for the Khadas MCU Programmable User Memory
>   MAINTAINERS: add myself as maintainer for Khadas MCU drivers
>   arm64: dts: meson-g12b: move G12B thermal nodes to meson-g12b.dtsi
>   arm64: dts: meson-sm1: add cpu thermal nodes

These two could/should be sent separately from this RFC series and
queued for v5.8.

Kevin

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [RFC 1/8] dt-bindings: mfd: add Khadas Microcontroller bindings
  2020-04-21  8:00 ` [RFC 1/8] dt-bindings: mfd: add Khadas Microcontroller bindings Neil Armstrong
@ 2020-05-06 20:12   ` Rob Herring
  0 siblings, 0 replies; 14+ messages in thread
From: Rob Herring @ 2020-05-06 20:12 UTC (permalink / raw)
  To: Neil Armstrong
  Cc: lee.jones, jdelvare, linux, srinivas.kandagatla, devicetree,
	linux-hwmon, Neil Armstrong, linux-kernel, nick, linux-amlogic,
	art, linux-arm-kernel

On Tue, 21 Apr 2020 10:00:55 +0200, Neil Armstrong wrote:
> This Microcontroller is present on the Khadas VIM1, VIM2, VIM3 and Edge
> boards.
> 
> It has multiple boot control features like password check, power-on
> options, power-off control and system FAN control on recent boards.
> 
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  .../devicetree/bindings/mfd/khadas,mcu.yaml   | 44 +++++++++++++++++++
>  1 file changed, 44 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/khadas,mcu.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [RFC 0/8] mfd: Add support for Khadas Microcontroller
  2020-04-29 19:16 ` [RFC 0/8] mfd: Add support for Khadas Microcontroller Kevin Hilman
@ 2020-05-07  7:44   ` Neil Armstrong
  0 siblings, 0 replies; 14+ messages in thread
From: Neil Armstrong @ 2020-05-07  7:44 UTC (permalink / raw)
  To: Kevin Hilman, lee.jones, jdelvare, linux, srinivas.kandagatla
  Cc: nick, art, linux-amlogic, linux-hwmon, linux-arm-kernel, linux-kernel

On 29/04/2020 21:16, Kevin Hilman wrote:
> Neil Armstrong <narmstrong@baylibre.com> writes:
> 
>> The new Khadas VIM2, VIM3 and Edge boards embeds an on-board microcontroller
>> connected via I2C.
>>
>> This Microcontroller is present on the Khadas VIM1, VIM2, VIM3 and Edge
>> boards.
>>
>> It has multiple boot control features like password check, power-on
>> options, power-off control and system FAN control on recent boards.
>>
>> Thie serie adds :
>> - the bindings
>> - the MFD driver
>> - the HWMON cell driver
>> - the NVMEM cell driver
>> - updates MAINTAINERS
>> - add support into the Khadas VIM3/VIM3L DT
>>
>> Neil Armstrong (8):
>>   dt-bindings: mfd: add Khadas Microcontroller bindings
>>   mfd: add support for the Khadas System control Microcontroller
>>   hwmon: add support for the MCU controlled FAN on Khadas boards
>>   nvmem: add support for the Khadas MCU Programmable User Memory
>>   MAINTAINERS: add myself as maintainer for Khadas MCU drivers
>>   arm64: dts: meson-g12b: move G12B thermal nodes to meson-g12b.dtsi
>>   arm64: dts: meson-sm1: add cpu thermal nodes
> 
> These two could/should be sent separately from this RFC series and
> queued for v5.8.
> 
> Kevin
> 

Ok

Neil

^ permalink raw reply	[flat|nested] 14+ messages in thread

end of thread, other threads:[~2020-05-07  7:44 UTC | newest]

Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-04-21  8:00 [RFC 0/8] mfd: Add support for Khadas Microcontroller Neil Armstrong
2020-04-21  8:00 ` [RFC 1/8] dt-bindings: mfd: add Khadas Microcontroller bindings Neil Armstrong
2020-05-06 20:12   ` Rob Herring
2020-04-21  8:00 ` [RFC 2/8] mfd: add support for the Khadas System control Microcontroller Neil Armstrong
2020-04-21  8:00 ` [RFC 3/8] hwmon: add support for the MCU controlled FAN on Khadas boards Neil Armstrong
2020-04-21  9:24   ` Guenter Roeck
2020-04-28 12:58     ` Neil Armstrong
2020-04-21  8:00 ` [RFC 4/8] nvmem: add support for the Khadas MCU Programmable User Memory Neil Armstrong
2020-04-21  8:00 ` [RFC 5/8] MAINTAINERS: add myself as maintainer for Khadas MCU drivers Neil Armstrong
2020-04-21  8:01 ` [RFC 6/8] arm64: dts: meson-g12b: move G12B thermal nodes to meson-g12b.dtsi Neil Armstrong
2020-04-21  8:01 ` [RFC 7/8] arm64: dts: meson-sm1: add cpu thermal nodes Neil Armstrong
2020-04-21  8:01 ` [RFC 8/8] arm64: dts: meson-khadas-vim3: add Khadas MCU nodes Neil Armstrong
2020-04-29 19:16 ` [RFC 0/8] mfd: Add support for Khadas Microcontroller Kevin Hilman
2020-05-07  7:44   ` Neil Armstrong

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).