From: Michael Walle <michael@walle.cc>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org,
linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: "Linus Walleij" <linus.walleij@linaro.org>,
"Bartosz Golaszewski" <bgolaszewski@baylibre.com>,
"Rob Herring" <robh+dt@kernel.org>,
"Jean Delvare" <jdelvare@suse.com>,
"Guenter Roeck" <linux@roeck-us.net>,
"Lee Jones" <lee.jones@linaro.org>,
"Thierry Reding" <thierry.reding@gmail.com>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Wim Van Sebroeck" <wim@linux-watchdog.org>,
"Shawn Guo" <shawnguo@kernel.org>, "Li Yang" <leoyang.li@nxp.com>,
"Thomas Gleixner" <tglx@linutronix.de>,
"Jason Cooper" <jason@lakedaemon.net>,
"Marc Zyngier" <maz@kernel.org>,
"Mark Brown" <broonie@kernel.org>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
"Michael Walle" <michael@walle.cc>
Subject: [PATCH v3 11/16] gpio: add support for the sl28cpld GPIO controller
Date: Thu, 23 Apr 2020 19:45:38 +0200 [thread overview]
Message-ID: <20200423174543.17161-12-michael@walle.cc> (raw)
In-Reply-To: <20200423174543.17161-1-michael@walle.cc>
This adds support for the GPIO controller of the sl28 board management
controller. This driver is part of a multi-function device.
Signed-off-by: Michael Walle <michael@walle.cc>
---
drivers/gpio/Kconfig | 11 +++
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-sl28cpld.c | 184 +++++++++++++++++++++++++++++++++++
3 files changed, 196 insertions(+)
create mode 100644 drivers/gpio/gpio-sl28cpld.c
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index ae3a49a2e970..95e2f223b34e 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -1215,6 +1215,17 @@ config GPIO_RC5T583
This driver provides the support for driving/reading the gpio pins
of RC5T583 device through standard gpio library.
+config GPIO_SL28CPLD
+ tristate "Kontron sl28 GPIO"
+ depends on MFD_SL28CPLD
+ select GPIO_REGMAP
+ select GPIOLIB_IRQCHIP
+ help
+ This enables support for the GPIOs found on the Kontron sl28 CPLD.
+
+ This driver can also be built as a module. If so, the module will be
+ called gpio-sl28cpld.
+
config GPIO_STMPE
bool "STMPE GPIOs"
depends on MFD_STMPE
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 93e139fdfa57..f50ccf13f5eb 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -129,6 +129,7 @@ obj-$(CONFIG_GPIO_SCH311X) += gpio-sch311x.o
obj-$(CONFIG_GPIO_SCH) += gpio-sch.o
obj-$(CONFIG_GPIO_SIFIVE) += gpio-sifive.o
obj-$(CONFIG_GPIO_SIOX) += gpio-siox.o
+obj-$(CONFIG_GPIO_SL28CPLD) += gpio-sl28cpld.o
obj-$(CONFIG_GPIO_SODAVILLE) += gpio-sodaville.o
obj-$(CONFIG_GPIO_SPEAR_SPICS) += gpio-spear-spics.o
obj-$(CONFIG_GPIO_SPRD) += gpio-sprd.o
diff --git a/drivers/gpio/gpio-sl28cpld.c b/drivers/gpio/gpio-sl28cpld.c
new file mode 100644
index 000000000000..98033d40e9d9
--- /dev/null
+++ b/drivers/gpio/gpio-sl28cpld.c
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sl28cpld GPIO driver.
+ *
+ * Copyright 2019 Michael Walle <michael@walle.cc>
+ */
+
+#include <linux/device.h>
+#include <linux/gpio-regmap.h>
+#include <linux/gpio/driver.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+/* GPIO flavor */
+#define GPIO_REG_DIR 0x00
+#define GPIO_REG_OUT 0x01
+#define GPIO_REG_IN 0x02
+#define GPIO_REG_IE 0x03
+#define GPIO_REG_IP 0x04
+
+/* input-only flavor */
+#define GPI_REG_IN 0x00
+
+/* output-only flavor */
+#define GPO_REG_OUT 0x00
+
+enum sl28cpld_gpio_type {
+ SL28CPLD_GPIO = 1,
+ SL28CPLD_GPI,
+ SL28CPLD_GPO,
+};
+
+struct sl28cpld_gpio {
+ struct regmap_irq_chip irq_chip;
+ struct regmap_irq_chip_data *irq_data;
+};
+
+static const struct regmap_irq sl28cpld_gpio_irqs[] = {
+ REGMAP_IRQ_REG_LINE(0, 8),
+ REGMAP_IRQ_REG_LINE(1, 8),
+ REGMAP_IRQ_REG_LINE(2, 8),
+ REGMAP_IRQ_REG_LINE(3, 8),
+ REGMAP_IRQ_REG_LINE(4, 8),
+ REGMAP_IRQ_REG_LINE(5, 8),
+ REGMAP_IRQ_REG_LINE(6, 8),
+ REGMAP_IRQ_REG_LINE(7, 8),
+};
+
+static int sl28cpld_gpio_irq_init(struct device *dev,
+ struct sl28cpld_gpio *gpio,
+ struct regmap *regmap, unsigned int base,
+ int irq)
+{
+ struct regmap_irq_chip *irq_chip = &gpio->irq_chip;
+
+ irq_chip->name = "sl28cpld-gpio-irq",
+ irq_chip->irqs = sl28cpld_gpio_irqs;
+ irq_chip->num_irqs = ARRAY_SIZE(sl28cpld_gpio_irqs);
+ irq_chip->num_regs = 1;
+ irq_chip->status_base = base + GPIO_REG_IP;
+ irq_chip->mask_base = base + GPIO_REG_IE;
+ irq_chip->mask_invert = true,
+ irq_chip->ack_base = base + GPIO_REG_IP;
+
+ return devm_regmap_add_irq_chip_np(dev, dev_of_node(dev), regmap,
+ irq, IRQF_SHARED | IRQF_ONESHOT, 0,
+ irq_chip, &gpio->irq_data);
+}
+
+static int sl28cpld_gpio_probe(struct platform_device *pdev)
+{
+ const struct platform_device_id *dev_id;
+ enum sl28cpld_gpio_type type;
+ struct sl28cpld_gpio *gpio;
+ struct gpio_regmap_config config = {0};
+ struct regmap *regmap;
+ struct resource *res;
+ bool irq_support = false;
+ unsigned int base;
+ int ret;
+ int irq;
+
+ if (!pdev->dev.parent)
+ return -ENODEV;
+
+ dev_id = platform_get_device_id(pdev);
+ if (dev_id)
+ type = dev_id->driver_data;
+ else
+ type = (uintptr_t)of_device_get_match_data(&pdev->dev);
+ if (!type)
+ return -ENODEV;
+
+ gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
+ if (!gpio)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_REG, 0);
+ if (!res)
+ return -EINVAL;
+ base = res->start;
+
+ regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!regmap)
+ return -ENODEV;
+
+ config.regmap = regmap;
+ config.parent = &pdev->dev;
+ config.ngpio = 8;
+
+ switch (type) {
+ case SL28CPLD_GPIO:
+ config.reg_dat_base = base + GPIO_REG_IN;
+ config.reg_set_base = base + GPIO_REG_OUT;
+ /* reg_dir_out_base might be zero */
+ config.reg_dir_out_base = GPIO_REGMAP_ADDR(base +
+ GPIO_REG_DIR);
+ irq_support = true;
+ break;
+ case SL28CPLD_GPO:
+ config.reg_set_base = base + GPO_REG_OUT;
+ break;
+ case SL28CPLD_GPI:
+ config.reg_dat_base = base + GPI_REG_IN;
+ break;
+ default:
+ dev_err(&pdev->dev, "unknown type %d\n", type);
+ return -ENODEV;
+ }
+
+ if (irq_support &&
+ device_property_read_bool(&pdev->dev, "interrupt-controller")) {
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ ret = sl28cpld_gpio_irq_init(&pdev->dev, gpio, regmap,
+ base, irq);
+ if (ret)
+ return ret;
+
+ config.irq_domain = regmap_irq_get_domain(gpio->irq_data);
+ dev_info(&pdev->dev, "registered IRQ %d\n", irq);
+ }
+
+ return PTR_ERR_OR_ZERO(devm_gpio_regmap_register(&pdev->dev, &config));
+}
+
+static const struct of_device_id sl28cpld_gpio_of_match[] = {
+ { .compatible = "kontron,sl28cpld-gpio",
+ .data = (void *)SL28CPLD_GPIO },
+ { .compatible = "kontron,sl28cpld-gpi",
+ .data = (void *)SL28CPLD_GPI },
+ { .compatible = "kontron,sl28cpld-gpo",
+ .data = (void *)SL28CPLD_GPO },
+ {},
+};
+MODULE_DEVICE_TABLE(of, sl28cpld_gpio_of_match);
+
+static const struct platform_device_id sl28cpld_gpio_id_table[] = {
+ { "sl28cpld-gpio", SL28CPLD_GPIO },
+ { "sl28cpld-gpi", SL28CPLD_GPI },
+ { "sl28cpld-gpo", SL28CPLD_GPO },
+ {}
+};
+MODULE_DEVICE_TABLE(platform, sl28cpld_gpio_id_table);
+
+static struct platform_driver sl28cpld_gpio_driver = {
+ .probe = sl28cpld_gpio_probe,
+ .id_table = sl28cpld_gpio_id_table,
+ .driver = {
+ .name = KBUILD_MODNAME,
+ .of_match_table = sl28cpld_gpio_of_match,
+ },
+};
+module_platform_driver(sl28cpld_gpio_driver);
+
+MODULE_DESCRIPTION("sl28cpld GPIO Driver");
+MODULE_AUTHOR("Michael Walle <michael@walle.cc>");
+MODULE_LICENSE("GPL");
--
2.20.1
next prev parent reply other threads:[~2020-04-23 17:47 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-23 17:45 [PATCH v3 00/16] Add support for Kontron sl28cpld Michael Walle
2020-04-23 17:45 ` [PATCH v3 01/16] include/linux/ioport.h: add helper to define REG resource constructs Michael Walle
2020-04-23 17:45 ` [PATCH v3 02/16] mfd: mfd-core: Don't overwrite the dma_mask of the child device Michael Walle
2020-04-28 12:45 ` Andy Shevchenko
2020-04-28 13:06 ` Robin Murphy
2020-04-28 14:29 ` Andy Shevchenko
2020-04-28 14:49 ` Robin Murphy
2020-04-28 15:25 ` Mark Brown
2020-05-14 20:45 ` Michael Walle
2020-04-23 17:45 ` [PATCH v3 03/16] mfd: mfd-core: match device tree node against reg property Michael Walle
2020-04-29 22:18 ` Michael Walle
2020-05-15 10:28 ` Lee Jones
2020-05-25 17:36 ` Michael Walle
2020-05-26 7:24 ` Lee Jones
2020-05-26 15:54 ` Michael Walle
2020-05-26 16:03 ` Andy Shevchenko
2020-05-27 6:53 ` Lee Jones
2020-06-08 14:24 ` Lee Jones
2020-06-08 15:21 ` Michael Walle
2020-06-08 18:45 ` Lee Jones
2020-04-23 17:45 ` [PATCH v3 04/16] dt-bindings: mfd: Add bindings for sl28cpld Michael Walle
2020-04-28 12:48 ` Andy Shevchenko
2020-04-28 14:39 ` Michael Walle
2020-04-28 14:49 ` Andy Shevchenko
2020-04-23 17:45 ` [PATCH v3 05/16] mfd: Add support for Kontron sl28cpld management controller Michael Walle
2020-04-28 12:50 ` Andy Shevchenko
2020-04-28 14:43 ` Michael Walle
2020-04-28 14:49 ` Andy Shevchenko
2020-04-29 6:27 ` Lee Jones
2020-05-11 21:13 ` Rob Herring
2020-05-11 21:44 ` Michael Walle
2020-05-11 22:29 ` Michael Walle
2020-05-12 21:59 ` Rob Herring
2020-05-13 22:15 ` Michael Walle
2020-04-23 17:45 ` [PATCH v3 06/16] irqchip: add sl28cpld interrupt controller support Michael Walle
2020-04-27 11:40 ` Thomas Gleixner
2020-04-27 17:40 ` Michael Walle
2020-04-27 17:44 ` Mark Brown
2020-04-27 18:01 ` Michael Walle
2020-04-27 18:05 ` Mark Brown
2020-04-27 19:00 ` Thomas Gleixner
2020-04-23 17:45 ` [PATCH v3 07/16] watchdog: add support for sl28cpld watchdog Michael Walle
2020-04-25 17:02 ` Guenter Roeck
2020-04-23 17:45 ` [PATCH v3 08/16] pwm: add support for sl28cpld PWM controller Michael Walle
2020-05-11 20:45 ` Rob Herring
2020-04-23 17:45 ` [PATCH v3 09/16] gpiolib: Introduce gpiochip_irqchip_add_domain() Michael Walle
2020-04-27 11:42 ` Thomas Gleixner
2020-04-27 17:49 ` Michael Walle
2020-04-23 17:45 ` [PATCH v3 10/16] gpio: add a reusable generic gpio_chip using regmap Michael Walle
2020-05-12 12:48 ` Bartosz Golaszewski
2020-05-12 14:41 ` Michael Walle
2020-05-25 9:05 ` Bartosz Golaszewski
2020-05-25 10:20 ` Michael Walle
2020-05-25 12:59 ` Linus Walleij
2020-05-25 13:25 ` Andy Shevchenko
2020-04-23 17:45 ` Michael Walle [this message]
2020-04-27 11:45 ` [PATCH v3 11/16] gpio: add support for the sl28cpld GPIO controller Thomas Gleixner
2020-04-27 17:58 ` Michael Walle
2020-04-23 17:45 ` [PATCH v3 12/16] hwmon: add support for the sl28cpld hardware monitoring controller Michael Walle
2020-04-23 17:45 ` [PATCH v3 13/16] arm64: dts: freescale: sl28: enable sl28cpld Michael Walle
2020-04-23 17:45 ` [PATCH v3 14/16] arm64: dts: freescale: sl28: map GPIOs to input events Michael Walle
2020-04-23 17:45 ` [PATCH v3 15/16] arm64: dts: freescale: sl28: enable LED support Michael Walle
2020-04-23 17:45 ` [PATCH v3 16/16] arm64: dts: freescale: sl28: enable fan support Michael Walle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200423174543.17161-12-michael@walle.cc \
--to=michael@walle.cc \
--cc=andriy.shevchenko@linux.intel.com \
--cc=bgolaszewski@baylibre.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jason@lakedaemon.net \
--cc=jdelvare@suse.com \
--cc=lee.jones@linaro.org \
--cc=leoyang.li@nxp.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=maz@kernel.org \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
--cc=tglx@linutronix.de \
--cc=thierry.reding@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).