[PATCH v4 0/3] hwmon: Adding support for Microchip Sparx5 SoC

[PATCH v4 0/3] hwmon: Adding support for Microchip Sparx5 SoC

[Lars Povlsen]

This is an add-on series to the main SoC Sparx5 series
(Message-ID: <20200615133242.24911-1-lars.povlsen@microchip.com>

Changes in v4:
- Added sparx5-temp.rst
- Sorted #include lines
- Use AHB clock to derive sensor divider
- Added comments to temperature calculation

Changes in v3:
- Enabled driver for COMPILE_TEST
- Use "bitfield.h"
- Trimmed #includes even more
- Removed unnecessary devm_add_action()
- Maintain sort order in Makefile
- Minor cosmetics

Changes in v2:
- Removed unnecessary #includes
- Statement reordering in s5_read()
- Replaced EINVAL with EIO
- Add 'break' in default: case statement.
- Removed extra ()
- Removed superfluous initialization

Lars Povlsen (3):
  dt-bindings: hwmon: Add Sparx5 temperature sensor
  arm64: dts: sparx5: Add hwmon temperature sensor
  hwmon: sparx5: Add Sparx5 SoC temperature driver

 .../bindings/hwmon/microchip,sparx5-temp.yaml |  44 +++++
 Documentation/hwmon/sparx5-temp.rst           |  33 ++++
 arch/arm64/boot/dts/microchip/sparx5.dtsi     |   7 +
 drivers/hwmon/Kconfig                         |  10 ++
 drivers/hwmon/Makefile                        |   1 +
 drivers/hwmon/sparx5-temp.c                   | 168 ++++++++++++++++++
 6 files changed, 263 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml
 create mode 100644 Documentation/hwmon/sparx5-temp.rst
 create mode 100644 drivers/hwmon/sparx5-temp.c

--
2.27.0

[PATCH v4 1/3] dt-bindings: hwmon: Add Sparx5 temperature sensor

[Lars Povlsen]

This add the DT binding specification for the Sparx5 temperature
sensor.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
---
 .../bindings/hwmon/microchip,sparx5-temp.yaml | 44 +++++++++++++++++++
 1 file changed, 44 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml

diff --git a/Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml b/Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml
new file mode 100644
index 0000000000000..76be625d56460
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/microchip,sparx5-temp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Sparx5 Temperature Monitor
+
+maintainers:
+  - Lars Povlsen <lars.povlsen@microchip.com>
+
+description: |
+  Microchip Sparx5 embedded temperature monitor
+
+properties:
+  compatible:
+    enum:
+      - microchip,sparx5-temp
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: AHB reference clock
+
+  '#thermal-sensor-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    tmon0: tmon@610508110 {
+        compatible = "microchip,sparx5-temp";
+        reg = <0x10508110 0xc>;
+        #thermal-sensor-cells = <0>;
+        clocks = <&ahb_clk>;
+    };
--
2.27.0

Re: [PATCH v4 1/3] dt-bindings: hwmon: Add Sparx5 temperature sensor

[Rob Herring]

On Thu, 18 Jun 2020 15:59:49 +0200, Lars Povlsen wrote:
> This add the DT binding specification for the Sparx5 temperature
> sensor.
> 
> Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
> ---
>  .../bindings/hwmon/microchip,sparx5-temp.yaml | 44 +++++++++++++++++++
>  1 file changed, 44 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>

[PATCH v4 2/3] arm64: dts: sparx5: Add hwmon temperature sensor

[Lars Povlsen]

This adds a hwmon temperature node sensor to the Sparx5 SoC.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
---
 arch/arm64/boot/dts/microchip/sparx5.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/microchip/sparx5.dtsi b/arch/arm64/boot/dts/microchip/sparx5.dtsi
index c9dbd1a8b22b6..7e811e24f0e99 100644
--- a/arch/arm64/boot/dts/microchip/sparx5.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5.dtsi
@@ -244,5 +244,12 @@ i2c1: i2c@600103000 {
 			clock-frequency = <100000>;
 			clocks = <&ahb_clk>;
 		};
+
+		tmon0: tmon@610508110 {
+			compatible = "microchip,sparx5-temp";
+			reg = <0x6 0x10508110 0xc>;
+			#thermal-sensor-cells = <0>;
+			clocks = <&ahb_clk>;
+		};
 	};
 };
-- 
2.27.0

[PATCH v4 3/3] hwmon: sparx5: Add Sparx5 SoC temperature driver

[Lars Povlsen]

This patch adds a temperature sensor driver to the Sparx5 SoC.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
---
 Documentation/hwmon/sparx5-temp.rst |  33 ++++++
 drivers/hwmon/Kconfig               |  10 ++
 drivers/hwmon/Makefile              |   1 +
 drivers/hwmon/sparx5-temp.c         | 168 ++++++++++++++++++++++++++++
 4 files changed, 212 insertions(+)
 create mode 100644 Documentation/hwmon/sparx5-temp.rst
 create mode 100644 drivers/hwmon/sparx5-temp.c

diff --git a/Documentation/hwmon/sparx5-temp.rst b/Documentation/hwmon/sparx5-temp.rst
new file mode 100644
index 0000000000000..0140809089542
--- /dev/null
+++ b/Documentation/hwmon/sparx5-temp.rst
@@ -0,0 +1,33 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+Microchip SparX-5 SoC
+=====================
+
+Supported chips:
+
+  * VSC7546, VSC7549, VSC755, VSC7556, and VSC7558 (Sparx5 series)
+
+    Prefix: 'sparx5-temp'
+
+    Addresses scanned: -
+
+    Datasheet: Provided by Microchip upon request and under NDA
+
+Author: Lars Povlsen <lars.povlsen@microchip.com>
+
+Description
+-----------
+
+The Sparx5 SoC contains a temperature sensor based on the MR74060
+Moortec IP.
+
+The sensor has a range of -40°C to +125°C and an accuracy of +/-5°C.
+
+Sysfs entries
+-------------
+
+The following attributes are supported.
+
+======================= ========================================================
+temp1_input		Die temperature (in millidegree Celsius.)
+======================= ========================================================
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 288ae9f63588c..7fb5e0c6c6306 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -515,6 +515,16 @@ config SENSORS_I5K_AMB
 	  This driver can also be built as a module. If so, the module
 	  will be called i5k_amb.
 
+config SENSORS_SPARX5
+	tristate "Sparx5 SoC temperature sensor"
+	depends on ARCH_SPARX5 || COMPILE_TEST
+	help
+	  If you say yes here you get support for temperature monitoring
+	  with the Microchip Sparx5 SoC.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called sparx5-temp.
+
 config SENSORS_F71805F
 	tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
 	depends on !PPC
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 3e32c21f5efe3..857293f650412 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -167,6 +167,7 @@ obj-$(CONFIG_SENSORS_SMM665)	+= smm665.o
 obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
 obj-$(CONFIG_SENSORS_SMSC47M1)	+= smsc47m1.o
 obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o
+obj-$(CONFIG_SENSORS_SPARX5)	+= sparx5-temp.o
 obj-$(CONFIG_SENSORS_STTS751)	+= stts751.o
 obj-$(CONFIG_SENSORS_AMC6821)	+= amc6821.o
 obj-$(CONFIG_SENSORS_TC74)	+= tc74.o
diff --git a/drivers/hwmon/sparx5-temp.c b/drivers/hwmon/sparx5-temp.c
new file mode 100644
index 0000000000000..7d7a060259a80
--- /dev/null
+++ b/drivers/hwmon/sparx5-temp.c
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* Sparx5 SoC temperature sensor driver
+ *
+ * Copyright (C) 2020 Lars Povlsen <lars.povlsen@microchip.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/hwmon.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#define TEMP_CTRL		0
+#define TEMP_CFG		4
+#define  TEMP_CFG_CYCLES	GENMASK(24, 15)
+#define  TEMP_CFG_ENA		BIT(0)
+#define TEMP_STAT		8
+#define  TEMP_STAT_VALID	BIT(12)
+#define  TEMP_STAT_TEMP		GENMASK(11, 0)
+
+struct s5_hwmon {
+	void __iomem *base;
+	struct clk *clk;
+};
+
+static void s5_temp_clk_disable(void *data)
+{
+	struct clk *clk = data;
+
+	clk_disable_unprepare(clk);
+}
+
+static void s5_temp_enable(struct s5_hwmon *hwmon)
+{
+	u32 val = readl(hwmon->base + TEMP_CFG);
+	u32 clk = clk_get_rate(hwmon->clk) / USEC_PER_SEC;
+
+	val &= ~TEMP_CFG_CYCLES;
+	val |= FIELD_PREP(TEMP_CFG_CYCLES, clk);
+	val |= TEMP_CFG_ENA;
+
+	writel(val, hwmon->base + TEMP_CFG);
+}
+
+static int s5_read(struct device *dev, enum hwmon_sensor_types type,
+		   u32 attr, int channel, long *temp)
+{
+	struct s5_hwmon *hwmon = dev_get_drvdata(dev);
+	int rc = 0, value;
+	u32 stat;
+
+	switch (attr) {
+	case hwmon_temp_input:
+		stat = readl_relaxed(hwmon->base + TEMP_STAT);
+		if (!(stat & TEMP_STAT_VALID))
+			return -EIO;
+		value = stat & TEMP_STAT_TEMP;
+		/*
+		 * From register documentation:
+		 * Temp(C) = TEMP_SENSOR_STAT.TEMP / 4096 * 352.2 - 109.4
+		 */
+		value = DIV_ROUND_CLOSEST(value * 3522, 4096) - 1094;
+		/*
+		 * Scale down by 10 from above and multiply by 1000 to
+		 * have millidegrees as specified by the hwmon sysfs
+		 * interface.
+		 */
+		value *= 100;
+		*temp = value;
+		break;
+	default:
+		rc = -EOPNOTSUPP;
+		break;
+	}
+
+	return rc;
+}
+
+static umode_t s5_is_visible(const void *_data, enum hwmon_sensor_types type,
+			     u32 attr, int channel)
+{
+	if (type != hwmon_temp)
+		return 0;
+
+	switch (attr) {
+	case hwmon_temp_input:
+		return 0444;
+	default:
+		return 0;
+	}
+}
+
+static const struct hwmon_channel_info *s5_info[] = {
+	HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ),
+	HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT),
+	NULL
+};
+
+static const struct hwmon_ops s5_hwmon_ops = {
+	.is_visible = s5_is_visible,
+	.read = s5_read,
+};
+
+static const struct hwmon_chip_info s5_chip_info = {
+	.ops = &s5_hwmon_ops,
+	.info = s5_info,
+};
+
+static int s5_temp_probe(struct platform_device *pdev)
+{
+	struct device *hwmon_dev;
+	struct s5_hwmon *hwmon;
+	int ret;
+
+	hwmon = devm_kzalloc(&pdev->dev, sizeof(*hwmon), GFP_KERNEL);
+	if (!hwmon)
+		return -ENOMEM;
+
+	hwmon->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(hwmon->base))
+		return PTR_ERR(hwmon->base);
+
+	hwmon->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(hwmon->clk))
+		return PTR_ERR(hwmon->clk);
+
+	ret = clk_prepare_enable(hwmon->clk);
+	if (ret)
+		return ret;
+
+	ret = devm_add_action_or_reset(&pdev->dev, s5_temp_clk_disable,
+				       hwmon->clk);
+	if (ret)
+		return ret;
+
+	s5_temp_enable(hwmon);
+
+	hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev,
+							 "s5_temp",
+							 hwmon,
+							 &s5_chip_info,
+							 NULL);
+
+	return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+const struct of_device_id s5_temp_match[] = {
+	{ .compatible = "microchip,sparx5-temp" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, s5_temp_match);
+
+static struct platform_driver s5_temp_driver = {
+	.probe = s5_temp_probe,
+	.driver = {
+		.name = "sparx5-temp",
+		.of_match_table = s5_temp_match,
+	},
+};
+
+module_platform_driver(s5_temp_driver);
+
+MODULE_AUTHOR("Lars Povlsen <lars.povlsen@microchip.com>");
+MODULE_DESCRIPTION("Sparx5 SoC temperature sensor driver");
+MODULE_LICENSE("GPL");
-- 
2.27.0

Re: [PATCH v4 3/3] hwmon: sparx5: Add Sparx5 SoC temperature driver

[Guenter Roeck]

On Thu, Jun 18, 2020 at 03:59:51PM +0200, Lars Povlsen wrote:
> This patch adds a temperature sensor driver to the Sparx5 SoC.
> 
> Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

Sorry for the long delay.

We'll still need approval from DT for DT properties.

> ---
>  Documentation/hwmon/sparx5-temp.rst |  33 ++++++

Nitpick: The new file needs to be added to index.rst.

Other than that, for my reference:

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

>  drivers/hwmon/Kconfig               |  10 ++
>  drivers/hwmon/Makefile              |   1 +
>  drivers/hwmon/sparx5-temp.c         | 168 ++++++++++++++++++++++++++++
>  4 files changed, 212 insertions(+)
>  create mode 100644 Documentation/hwmon/sparx5-temp.rst
>  create mode 100644 drivers/hwmon/sparx5-temp.c
> 
> diff --git a/Documentation/hwmon/sparx5-temp.rst b/Documentation/hwmon/sparx5-temp.rst
> new file mode 100644
> index 0000000000000..0140809089542
> --- /dev/null
> +++ b/Documentation/hwmon/sparx5-temp.rst
> @@ -0,0 +1,33 @@
> +.. SPDX-License-Identifier: GPL-2.0-only
> +
> +Microchip SparX-5 SoC
> +=====================
> +
> +Supported chips:
> +
> +  * VSC7546, VSC7549, VSC755, VSC7556, and VSC7558 (Sparx5 series)
> +
> +    Prefix: 'sparx5-temp'
> +
> +    Addresses scanned: -
> +
> +    Datasheet: Provided by Microchip upon request and under NDA
> +
> +Author: Lars Povlsen <lars.povlsen@microchip.com>
> +
> +Description
> +-----------
> +
> +The Sparx5 SoC contains a temperature sensor based on the MR74060
> +Moortec IP.
> +
> +The sensor has a range of -40°C to +125°C and an accuracy of +/-5°C.
> +
> +Sysfs entries
> +-------------
> +
> +The following attributes are supported.
> +
> +======================= ========================================================
> +temp1_input		Die temperature (in millidegree Celsius.)
> +======================= ========================================================
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 288ae9f63588c..7fb5e0c6c6306 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -515,6 +515,16 @@ config SENSORS_I5K_AMB
>  	  This driver can also be built as a module. If so, the module
>  	  will be called i5k_amb.
>  
> +config SENSORS_SPARX5
> +	tristate "Sparx5 SoC temperature sensor"
> +	depends on ARCH_SPARX5 || COMPILE_TEST
> +	help
> +	  If you say yes here you get support for temperature monitoring
> +	  with the Microchip Sparx5 SoC.
> +
> +	  This driver can also be built as a module. If so, the module
> +	  will be called sparx5-temp.
> +
>  config SENSORS_F71805F
>  	tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
>  	depends on !PPC
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index 3e32c21f5efe3..857293f650412 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -167,6 +167,7 @@ obj-$(CONFIG_SENSORS_SMM665)	+= smm665.o
>  obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
>  obj-$(CONFIG_SENSORS_SMSC47M1)	+= smsc47m1.o
>  obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o
> +obj-$(CONFIG_SENSORS_SPARX5)	+= sparx5-temp.o
>  obj-$(CONFIG_SENSORS_STTS751)	+= stts751.o
>  obj-$(CONFIG_SENSORS_AMC6821)	+= amc6821.o
>  obj-$(CONFIG_SENSORS_TC74)	+= tc74.o
> diff --git a/drivers/hwmon/sparx5-temp.c b/drivers/hwmon/sparx5-temp.c
> new file mode 100644
> index 0000000000000..7d7a060259a80
> --- /dev/null
> +++ b/drivers/hwmon/sparx5-temp.c
> @@ -0,0 +1,168 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/* Sparx5 SoC temperature sensor driver
> + *
> + * Copyright (C) 2020 Lars Povlsen <lars.povlsen@microchip.com>
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/clk.h>
> +#include <linux/hwmon.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +
> +#define TEMP_CTRL		0
> +#define TEMP_CFG		4
> +#define  TEMP_CFG_CYCLES	GENMASK(24, 15)
> +#define  TEMP_CFG_ENA		BIT(0)
> +#define TEMP_STAT		8
> +#define  TEMP_STAT_VALID	BIT(12)
> +#define  TEMP_STAT_TEMP		GENMASK(11, 0)
> +
> +struct s5_hwmon {
> +	void __iomem *base;
> +	struct clk *clk;
> +};
> +
> +static void s5_temp_clk_disable(void *data)
> +{
> +	struct clk *clk = data;
> +
> +	clk_disable_unprepare(clk);
> +}
> +
> +static void s5_temp_enable(struct s5_hwmon *hwmon)
> +{
> +	u32 val = readl(hwmon->base + TEMP_CFG);
> +	u32 clk = clk_get_rate(hwmon->clk) / USEC_PER_SEC;
> +
> +	val &= ~TEMP_CFG_CYCLES;
> +	val |= FIELD_PREP(TEMP_CFG_CYCLES, clk);
> +	val |= TEMP_CFG_ENA;
> +
> +	writel(val, hwmon->base + TEMP_CFG);
> +}
> +
> +static int s5_read(struct device *dev, enum hwmon_sensor_types type,
> +		   u32 attr, int channel, long *temp)
> +{
> +	struct s5_hwmon *hwmon = dev_get_drvdata(dev);
> +	int rc = 0, value;
> +	u32 stat;
> +
> +	switch (attr) {
> +	case hwmon_temp_input:
> +		stat = readl_relaxed(hwmon->base + TEMP_STAT);
> +		if (!(stat & TEMP_STAT_VALID))
> +			return -EIO;
> +		value = stat & TEMP_STAT_TEMP;
> +		/*
> +		 * From register documentation:
> +		 * Temp(C) = TEMP_SENSOR_STAT.TEMP / 4096 * 352.2 - 109.4
> +		 */
> +		value = DIV_ROUND_CLOSEST(value * 3522, 4096) - 1094;
> +		/*
> +		 * Scale down by 10 from above and multiply by 1000 to
> +		 * have millidegrees as specified by the hwmon sysfs
> +		 * interface.
> +		 */
> +		value *= 100;
> +		*temp = value;
> +		break;
> +	default:
> +		rc = -EOPNOTSUPP;
> +		break;
> +	}
> +
> +	return rc;
> +}
> +
> +static umode_t s5_is_visible(const void *_data, enum hwmon_sensor_types type,
> +			     u32 attr, int channel)
> +{
> +	if (type != hwmon_temp)
> +		return 0;
> +
> +	switch (attr) {
> +	case hwmon_temp_input:
> +		return 0444;
> +	default:
> +		return 0;
> +	}
> +}
> +
> +static const struct hwmon_channel_info *s5_info[] = {
> +	HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ),
> +	HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT),
> +	NULL
> +};
> +
> +static const struct hwmon_ops s5_hwmon_ops = {
> +	.is_visible = s5_is_visible,
> +	.read = s5_read,
> +};
> +
> +static const struct hwmon_chip_info s5_chip_info = {
> +	.ops = &s5_hwmon_ops,
> +	.info = s5_info,
> +};
> +
> +static int s5_temp_probe(struct platform_device *pdev)
> +{
> +	struct device *hwmon_dev;
> +	struct s5_hwmon *hwmon;
> +	int ret;
> +
> +	hwmon = devm_kzalloc(&pdev->dev, sizeof(*hwmon), GFP_KERNEL);
> +	if (!hwmon)
> +		return -ENOMEM;
> +
> +	hwmon->base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(hwmon->base))
> +		return PTR_ERR(hwmon->base);
> +
> +	hwmon->clk = devm_clk_get(&pdev->dev, NULL);
> +	if (IS_ERR(hwmon->clk))
> +		return PTR_ERR(hwmon->clk);
> +
> +	ret = clk_prepare_enable(hwmon->clk);
> +	if (ret)
> +		return ret;
> +
> +	ret = devm_add_action_or_reset(&pdev->dev, s5_temp_clk_disable,
> +				       hwmon->clk);
> +	if (ret)
> +		return ret;
> +
> +	s5_temp_enable(hwmon);
> +
> +	hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev,
> +							 "s5_temp",
> +							 hwmon,
> +							 &s5_chip_info,
> +							 NULL);
> +
> +	return PTR_ERR_OR_ZERO(hwmon_dev);
> +}
> +
> +const struct of_device_id s5_temp_match[] = {
> +	{ .compatible = "microchip,sparx5-temp" },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, s5_temp_match);
> +
> +static struct platform_driver s5_temp_driver = {
> +	.probe = s5_temp_probe,
> +	.driver = {
> +		.name = "sparx5-temp",
> +		.of_match_table = s5_temp_match,
> +	},
> +};
> +
> +module_platform_driver(s5_temp_driver);
> +
> +MODULE_AUTHOR("Lars Povlsen <lars.povlsen@microchip.com>");
> +MODULE_DESCRIPTION("Sparx5 SoC temperature sensor driver");
> +MODULE_LICENSE("GPL");