Linux-Hwmon Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v5 0/7] hwmon: pmbus: adm1266: add support
@ 2020-06-24 15:17 alexandru.tachici
  2020-06-24 15:17 ` [PATCH v5 1/7] " alexandru.tachici
                   ` (6 more replies)
  0 siblings, 7 replies; 12+ messages in thread
From: alexandru.tachici @ 2020-06-24 15:17 UTC (permalink / raw)
  To: linux-hwmon, linux-kernel, devicetree; +Cc: robh+dt, linux, Alexandru Tachici

From: Alexandru Tachici <alexandru.tachici@analog.com>

Add PMBus probing driver for the adm1266 Cascadable
Super Sequencer with Margin Control and Fault Recording.
Driver is using the pmbus_core, creating sysfs files
under hwmon for inputs: vh1->vh4 and vp1->vp13.

1. Add PMBus probing driver for inputs vh1->vh4
and vp1->vp13.

2. Add Block Write-Read Process Call command.
A PMBus specific implementation was required because
block write with I2C_SMBUS_PROC_CALL flag allows a
maximum of 32 bytes to be received.

3. This makes adm1266 driver expose GPIOs
to user-space. Currently are read only. Future
developments on the firmware will allow
them to be writable.

4. Add two ioctl commands for issuing GO_COMMAND
and reading the state of the adm1266 sequencer.

5. Blackboxes are 64 bytes of chip state related data
that is generated on faults. Use the nvmem kernel api
to expose the blackbox chip functionality to userspace.

6. Expose BLACKBOX_INFO register through debugfs.

7. Device tree bindings for ADM1266.

Alexandru Tachici (7):
  hwmon: pmbus: adm1266: add support
  hwmon: pmbus: adm1266: Add Block process call
  hwmon: pmbus: adm1266: Add support for GPIOs
  hwmon: pmbus: adm1266: Add ioctl commands
  hwmon: pmbus: adm1266: read blackbox
  hwmon: pmbus: adm1266: debugfs for blackbox info
  dt-bindings: hwmon: Add bindings for ADM1266

Changelog v3 -> v4:
- moved pmbus_block_wr (pmbus process call) from pmbus_core.
to adm1266.c and renamed to pmbus_block_xfer
- in pmbus_block_xfer: fixed buffer size bug (from 255 to 257)
- in adm1266_gpio_get_multiple: handle pdios and gpios one at a time
to lower allocated space on stack
- in adm1266_gpio_dbg_show: replaced write_buf with u8 write_cmd var
- in adm1266_gpio_dbg_show: check number of bytes received from device
returned by pmbus_block_xfer.
- now use ioctl to send GO_COMMAND and retrieve current state of adm1266
- split blackbox commit into blackbox nvmem implementation and debugfs
blackbox info debugfs
- create adm1266 debugfs dir under /sys/kernel/debug/pmbus/hwmon for
blackbox_info

Changelog v4 -> v5:
- added WITH Linux-syscall-note to adm1266.h

 .../bindings/hwmon/adi,adm1266.yaml           |  56 ++
 Documentation/hwmon/adm1266.rst               |  50 ++
 .../userspace-api/ioctl/ioctl-number.rst      |   1 +
 drivers/hwmon/pmbus/Kconfig                   |  10 +
 drivers/hwmon/pmbus/Makefile                  |   1 +
 drivers/hwmon/pmbus/adm1266.c                 | 657 ++++++++++++++++++
 include/uapi/linux/adm1266.h                  |  16 +
 7 files changed, 791 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml
 create mode 100644 Documentation/hwmon/adm1266.rst
 create mode 100644 drivers/hwmon/pmbus/adm1266.c
 create mode 100644 include/uapi/linux/adm1266.h

-- 
2.20.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v5 1/7] hwmon: pmbus: adm1266: add support
  2020-06-24 15:17 [PATCH v5 0/7] hwmon: pmbus: adm1266: add support alexandru.tachici
@ 2020-06-24 15:17 ` alexandru.tachici
  2020-06-24 15:17 ` [PATCH v5 2/7] hwmon: pmbus: adm1266: Add Block process call alexandru.tachici
                   ` (5 subsequent siblings)
  6 siblings, 0 replies; 12+ messages in thread
From: alexandru.tachici @ 2020-06-24 15:17 UTC (permalink / raw)
  To: linux-hwmon, linux-kernel, devicetree; +Cc: robh+dt, linux, Alexandru Tachici

From: Alexandru Tachici <alexandru.tachici@analog.com>

Add pmbus probing driver for the adm1266 Cascadable
Super Sequencer with Margin Control and Fault Recording.
Driver is using the pmbus_core, creating sysfs files
under hwmon for inputs: vh1->vh4 and vp1->vp13.

Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
---
 Documentation/hwmon/adm1266.rst | 35 +++++++++++++++++++
 drivers/hwmon/pmbus/Kconfig     |  9 +++++
 drivers/hwmon/pmbus/Makefile    |  1 +
 drivers/hwmon/pmbus/adm1266.c   | 62 +++++++++++++++++++++++++++++++++
 4 files changed, 107 insertions(+)
 create mode 100644 Documentation/hwmon/adm1266.rst
 create mode 100644 drivers/hwmon/pmbus/adm1266.c

diff --git a/Documentation/hwmon/adm1266.rst b/Documentation/hwmon/adm1266.rst
new file mode 100644
index 000000000000..65662115750c
--- /dev/null
+++ b/Documentation/hwmon/adm1266.rst
@@ -0,0 +1,35 @@
+Kernel driver adm1266
+=====================
+
+Supported chips:
+  * Analog Devices ADM1266
+    Prefix: 'adm1266'
+    Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1266.pdf
+
+Author: Alexandru Tachici <alexandru.tachici@analog.com>
+
+
+Description
+-----------
+
+This driver supports hardware monitoring for Analog Devices ADM1266 sequencer.
+
+ADM1266 is a sequencer that features voltage readback from 17 channels via an
+integrated 12 bit SAR ADC, accessed using a PMBus interface.
+
+The driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus for details on PMBus client drivers.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Limits are read-write, history reset
+attributes are write-only, all other attributes are read-only.
+
+inX_label		"voutx"
+inX_input		Measured voltage.
+inX_min			Minimum Voltage.
+inX_max			Maximum voltage.
+inX_min_alarm		Voltage low alarm.
+inX_max_alarm		Voltage high alarm.
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index a337195b1c39..da34083e1ffd 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -26,6 +26,15 @@ config SENSORS_PMBUS
 	  This driver can also be built as a module. If so, the module will
 	  be called pmbus.
 
+config SENSORS_ADM1266
+	tristate "Analog Devices ADM1266 Sequencer"
+	help
+	  If you say yes here you get hardware monitoring support for Analog
+	  Devices ADM1266 Cascadable Super Sequencer.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called adm1266.
+
 config SENSORS_ADM1275
 	tristate "Analog Devices ADM1275 and compatibles"
 	help
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index c4b15db996ad..da41d22be1c9 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -5,6 +5,7 @@
 
 obj-$(CONFIG_PMBUS)		+= pmbus_core.o
 obj-$(CONFIG_SENSORS_PMBUS)	+= pmbus.o
+obj-$(CONFIG_SENSORS_ADM1266)	+= adm1266.o
 obj-$(CONFIG_SENSORS_ADM1275)	+= adm1275.o
 obj-$(CONFIG_SENSORS_BEL_PFE)	+= bel-pfe.o
 obj-$(CONFIG_SENSORS_IBM_CFFPS)	+= ibm-cffps.o
diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c
new file mode 100644
index 000000000000..a7ef048a9a5c
--- /dev/null
+++ b/drivers/hwmon/pmbus/adm1266.c
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ADM1266 - Cascadable Super Sequencer with Margin
+ * Control and Fault Recording
+ *
+ * Copyright 2020 Analog Devices Inc.
+ */
+
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include "pmbus.h"
+
+static int adm1266_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct pmbus_driver_info *info;
+	u32 funcs;
+	int i;
+
+	info = devm_kzalloc(&client->dev, sizeof(struct pmbus_driver_info),
+			    GFP_KERNEL);
+
+	info->pages = 17;
+	info->format[PSC_VOLTAGE_OUT] = linear;
+	funcs = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
+	for (i = 0; i < info->pages; i++)
+		info->func[i] = funcs;
+
+	return pmbus_do_probe(client, id, info);
+}
+
+static const struct of_device_id adm1266_of_match[] = {
+	{ .compatible = "adi,adm1266" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, adm1266_of_match);
+
+static const struct i2c_device_id adm1266_id[] = {
+	{ "adm1266", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, adm1266_id);
+
+static struct i2c_driver adm1266_driver = {
+	.driver = {
+		   .name = "adm1266",
+		   .of_match_table = adm1266_of_match,
+		  },
+	.probe = adm1266_probe,
+	.remove = pmbus_do_remove,
+	.id_table = adm1266_id,
+};
+
+module_i2c_driver(adm1266_driver);
+
+MODULE_AUTHOR("Alexandru Tachici <alexandru.tachici@analog.com>");
+MODULE_DESCRIPTION("PMBus driver for Analog Devices ADM1266");
+MODULE_LICENSE("GPL v2");
-- 
2.20.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v5 2/7] hwmon: pmbus: adm1266: Add Block process call
  2020-06-24 15:17 [PATCH v5 0/7] hwmon: pmbus: adm1266: add support alexandru.tachici
  2020-06-24 15:17 ` [PATCH v5 1/7] " alexandru.tachici
@ 2020-06-24 15:17 ` alexandru.tachici
  2020-06-24 17:00   ` kernel test robot
  2020-06-30  2:43   ` [RFC PATCH] hwmon: pmbus: adm1266: pmbus_block_xfer() can be static kernel test robot
  2020-06-24 15:17 ` [PATCH v5 3/7] hwmon: pmbus: adm1266: Add support for GPIOs alexandru.tachici
                   ` (4 subsequent siblings)
  6 siblings, 2 replies; 12+ messages in thread
From: alexandru.tachici @ 2020-06-24 15:17 UTC (permalink / raw)
  To: linux-hwmon, linux-kernel, devicetree; +Cc: robh+dt, linux, Alexandru Tachici

From: Alexandru Tachici <alexandru.tachici@analog.com>

PmBus devices support Block Write-Block Read Process
Call described in SMBus specification v 2.0 with the
exception that Block writes and reads are permitted to
have up 255 data bytes instead of max 32 bytes (SMBus).

This patch adds Block WR process call support for ADM1266.

Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
---
 drivers/hwmon/pmbus/Kconfig   |  1 +
 drivers/hwmon/pmbus/adm1266.c | 79 +++++++++++++++++++++++++++++++++++
 2 files changed, 80 insertions(+)

diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index da34083e1ffd..c04068b665e6 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -28,6 +28,7 @@ config SENSORS_PMBUS
 
 config SENSORS_ADM1266
 	tristate "Analog Devices ADM1266 Sequencer"
+	select CRC8
 	help
 	  If you say yes here you get hardware monitoring support for Analog
 	  Devices ADM1266 Cascadable Super Sequencer.
diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c
index a7ef048a9a5c..381d89a8569f 100644
--- a/drivers/hwmon/pmbus/adm1266.c
+++ b/drivers/hwmon/pmbus/adm1266.c
@@ -6,6 +6,7 @@
  * Copyright 2020 Analog Devices Inc.
  */
 
+#include <linux/crc8.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -14,6 +15,82 @@
 
 #include "pmbus.h"
 
+#define ADM1266_PMBUS_BLOCK_MAX		255
+
+DECLARE_CRC8_TABLE(pmbus_crc_table);
+
+/* Different from Block Read as it sends data and waits for the slave to
+ * return a value dependent on that data. The protocol is simply a Write Block
+ * followed by a Read Block without the Read-Block command field and the
+ * Write-Block STOP bit.
+ */
+int pmbus_block_xfer(struct i2c_client *client, u8 cmd, u8 w_len,
+		     u8 *data_w, u8 *data_r)
+{
+	u8 write_buf[ADM1266_PMBUS_BLOCK_MAX + 2];
+	struct i2c_msg msgs[2] = {
+		{
+			.addr = client->addr,
+			.flags = 0,
+			.buf = write_buf,
+			.len = w_len + 2,
+		},
+		{
+			.addr = client->addr,
+			.flags = I2C_M_RD,
+			.len = ADM1266_PMBUS_BLOCK_MAX + 2,
+		}
+	};
+	u8 addr = 0;
+	u8 crc = 0;
+	int ret;
+
+	msgs[0].buf[0] = cmd;
+	msgs[0].buf[1] = w_len;
+	memcpy(&msgs[0].buf[2], data_w, w_len);
+
+	msgs[0].buf = i2c_get_dma_safe_msg_buf(&msgs[0], 1);
+	if (!msgs[0].buf)
+		return -ENOMEM;
+
+	msgs[1].buf = i2c_get_dma_safe_msg_buf(&msgs[1], 1);
+	if (!msgs[1].buf) {
+		i2c_put_dma_safe_msg_buf(msgs[0].buf, &msgs[0], false);
+		return -ENOMEM;
+	}
+
+	ret = i2c_transfer(client->adapter, msgs, 2);
+	if (ret != 2) {
+		ret = -EPROTO;
+		goto cleanup;
+	}
+
+	if (client->flags & I2C_CLIENT_PEC) {
+		addr = i2c_8bit_addr_from_msg(&msgs[0]);
+		crc = crc8(pmbus_crc_table, &addr, 1, crc);
+		crc = crc8(pmbus_crc_table, msgs[0].buf,  msgs[0].len, crc);
+
+		addr = i2c_8bit_addr_from_msg(&msgs[1]);
+		crc = crc8(pmbus_crc_table, &addr, 1, crc);
+		crc = crc8(pmbus_crc_table, msgs[1].buf,  msgs[1].buf[0] + 1,
+			   crc);
+
+		if (crc != msgs[1].buf[msgs[1].buf[0] + 1]) {
+			ret = -EBADMSG;
+			goto cleanup;
+		}
+	}
+
+	memcpy(data_r, &msgs[1].buf[1], msgs[1].buf[0]);
+	ret = msgs[1].buf[0];
+
+cleanup:
+	i2c_put_dma_safe_msg_buf(msgs[0].buf, &msgs[0], true);
+	i2c_put_dma_safe_msg_buf(msgs[1].buf, &msgs[1], true);
+
+	return ret;
+}
+
 static int adm1266_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
@@ -24,6 +101,8 @@ static int adm1266_probe(struct i2c_client *client,
 	info = devm_kzalloc(&client->dev, sizeof(struct pmbus_driver_info),
 			    GFP_KERNEL);
 
+	crc8_populate_msb(pmbus_crc_table, 0x7);
+
 	info->pages = 17;
 	info->format[PSC_VOLTAGE_OUT] = linear;
 	funcs = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
-- 
2.20.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v5 3/7] hwmon: pmbus: adm1266: Add support for GPIOs
  2020-06-24 15:17 [PATCH v5 0/7] hwmon: pmbus: adm1266: add support alexandru.tachici
  2020-06-24 15:17 ` [PATCH v5 1/7] " alexandru.tachici
  2020-06-24 15:17 ` [PATCH v5 2/7] hwmon: pmbus: adm1266: Add Block process call alexandru.tachici
@ 2020-06-24 15:17 ` alexandru.tachici
  2020-06-24 15:17 ` [PATCH v5 4/7] hwmon: pmbus: adm1266: Add ioctl commands alexandru.tachici
                   ` (3 subsequent siblings)
  6 siblings, 0 replies; 12+ messages in thread
From: alexandru.tachici @ 2020-06-24 15:17 UTC (permalink / raw)
  To: linux-hwmon, linux-kernel, devicetree; +Cc: robh+dt, linux, Alexandru Tachici

From: Alexandru Tachici <alexandru.tachici@analog.com>

Adm1266 exposes 9 GPIOs and 16 PDIOs which are currently read-only. They
are controlled by the internal sequencing engine.

This patch makes adm1266 driver expose GPIOs and PDIOs to user-space
using GPIO provider kernel api.

Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
---
 drivers/hwmon/pmbus/adm1266.c | 233 +++++++++++++++++++++++++++++++++-
 1 file changed, 232 insertions(+), 1 deletion(-)

diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c
index 381d89a8569f..76bf2c78e737 100644
--- a/drivers/hwmon/pmbus/adm1266.c
+++ b/drivers/hwmon/pmbus/adm1266.c
@@ -6,8 +6,12 @@
  * Copyright 2020 Analog Devices Inc.
  */
 
+#include <linux/bitfield.h>
 #include <linux/crc8.h>
+#include <linux/debugfs.h>
+#include <linux/gpio/driver.h>
 #include <linux/i2c.h>
+#include <linux/i2c-smbus.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -15,10 +19,35 @@
 
 #include "pmbus.h"
 
+#define ADM1266_PDIO_CONFIG	0xD4
+#define ADM1266_GPIO_CONFIG	0xE1
+#define ADM1266_PDIO_STATUS	0xE9
+#define ADM1266_GPIO_STATUS	0xEA
+
+/* ADM1266 GPIO defines */
+#define ADM1266_GPIO_NR			9
+#define ADM1266_GPIO_FUNCTIONS(x)	FIELD_GET(BIT(0), x)
+#define ADM1266_GPIO_INPUT_EN(x)	FIELD_GET(BIT(2), x)
+#define ADM1266_GPIO_OUTPUT_EN(x)	FIELD_GET(BIT(3), x)
+#define ADM1266_GPIO_OPEN_DRAIN(x)	FIELD_GET(BIT(4), x)
+
+/* ADM1266 PDIO defines */
+#define ADM1266_PDIO_NR			16
+#define ADM1266_PDIO_PIN_CFG(x)		FIELD_GET(GENMASK(15, 13), x)
+#define ADM1266_PDIO_GLITCH_FILT(x)	FIELD_GET(GENMASK(12, 9), x)
+#define ADM1266_PDIO_OUT_CFG(x)		FIELD_GET(GENMASK(2, 0), x)
+
 #define ADM1266_PMBUS_BLOCK_MAX		255
 
 DECLARE_CRC8_TABLE(pmbus_crc_table);
 
+struct adm1266_data {
+	struct pmbus_driver_info info;
+	struct gpio_chip gc;
+	const char *gpio_names[ADM1266_GPIO_NR + ADM1266_PDIO_NR];
+	struct i2c_client *client;
+};
+
 /* Different from Block Read as it sends data and waits for the slave to
  * return a value dependent on that data. The protocol is simply a Write Block
  * followed by a Read Block without the Read-Block command field and the
@@ -91,18 +120,220 @@ int pmbus_block_xfer(struct i2c_client *client, u8 cmd, u8 w_len,
 	return ret;
 }
 
+#ifdef CONFIG_GPIOLIB
+static const unsigned int adm1266_gpio_mapping[ADM1266_GPIO_NR][2] = {
+	{1, 0},
+	{2, 1},
+	{3, 2},
+	{4, 8},
+	{5, 9},
+	{6, 10},
+	{7, 11},
+	{8, 6},
+	{9, 7},
+};
+
+static const char *adm1266_names[ADM1266_GPIO_NR + ADM1266_PDIO_NR] = {
+	"GPIO1", "GPIO2", "GPIO3", "GPIO4", "GPIO5", "GPIO6", "GPIO7", "GPIO8",
+	"GPIO9", "PDIO1", "PDIO2", "PDIO3", "PDIO4", "PDIO5", "PDIO6",
+	"PDIO7", "PDIO8", "PDIO9", "PDIO10", "PDIO11", "PDIO12", "PDIO13",
+	"PDIO14", "PDIO15", "PDIO16",
+};
+
+static int adm1266_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct adm1266_data *data = gpiochip_get_data(chip);
+	u8 read_buf[I2C_SMBUS_BLOCK_MAX + 1];
+	unsigned long pins_status;
+	unsigned int pmbus_cmd;
+	int ret;
+
+	if (offset < ADM1266_GPIO_NR)
+		pmbus_cmd = ADM1266_GPIO_STATUS;
+	else
+		pmbus_cmd = ADM1266_PDIO_STATUS;
+
+	ret = i2c_smbus_read_block_data(data->client, pmbus_cmd,
+					read_buf);
+	if (ret < 0)
+		return ret;
+
+	pins_status = read_buf[0] + (read_buf[1] << 8);
+	if (offset < ADM1266_GPIO_NR)
+		return test_bit(adm1266_gpio_mapping[offset][1], &pins_status);
+
+	return test_bit(offset - ADM1266_GPIO_NR, &pins_status);
+}
+
+static int adm1266_gpio_get_multiple(struct gpio_chip *chip,
+				     unsigned long *mask,
+				     unsigned long *bits)
+{
+	struct adm1266_data *data = gpiochip_get_data(chip);
+	u8 read_buf[ADM1266_PMBUS_BLOCK_MAX + 1];
+	unsigned long status;
+	unsigned int gpio_nr;
+	int ret;
+
+	ret = i2c_smbus_read_block_data(data->client, ADM1266_GPIO_STATUS,
+					read_buf);
+	if (ret < 0)
+		return ret;
+
+	status = read_buf[0] + (read_buf[1] << 8);
+
+	*bits = 0;
+	for_each_set_bit(gpio_nr, mask, ADM1266_GPIO_NR) {
+		if (test_bit(adm1266_gpio_mapping[gpio_nr][1], &status))
+			set_bit(gpio_nr, bits);
+	}
+
+	ret = i2c_smbus_read_block_data(data->client, ADM1266_PDIO_STATUS,
+					read_buf);
+	if (ret < 0)
+		return ret;
+
+	status = read_buf[0] + (read_buf[1] << 8);
+
+	*bits = 0;
+	for_each_set_bit_from(gpio_nr, mask,
+			      ADM1266_GPIO_NR + ADM1266_PDIO_STATUS) {
+		if (test_bit(gpio_nr - ADM1266_GPIO_NR, &status))
+			set_bit(gpio_nr, bits);
+	}
+
+	return 0;
+}
+
+static void adm1266_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+	struct adm1266_data *data = gpiochip_get_data(chip);
+	u8 read_buf[ADM1266_PMBUS_BLOCK_MAX + 1];
+	unsigned long gpio_config;
+	unsigned long pdio_config;
+	unsigned long pin_cfg;
+	u8 write_cmd;
+	int ret;
+	int i;
+
+	for (i = 0; i < ADM1266_GPIO_NR; i++) {
+		write_cmd = adm1266_gpio_mapping[i][1];
+		ret = pmbus_block_xfer(data->client, ADM1266_GPIO_CONFIG, 1,
+				       &write_cmd, read_buf);
+		if (ret != 2)
+			return;
+
+		gpio_config = read_buf[0];
+		seq_puts(s, adm1266_names[i]);
+
+		seq_puts(s, " ( ");
+		if (!ADM1266_GPIO_FUNCTIONS(gpio_config)) {
+			seq_puts(s, "high-Z )\n");
+			continue;
+		}
+		if (ADM1266_GPIO_INPUT_EN(gpio_config))
+			seq_puts(s, "input ");
+		if (ADM1266_GPIO_OUTPUT_EN(gpio_config))
+			seq_puts(s, "output ");
+		if (ADM1266_GPIO_OPEN_DRAIN(gpio_config))
+			seq_puts(s, "open-drain )\n");
+		else
+			seq_puts(s, "push-pull )\n");
+	}
+
+	write_cmd = 0xFF;
+	ret = pmbus_block_xfer(data->client, ADM1266_PDIO_CONFIG, 1, &write_cmd,
+			       read_buf);
+	if (ret != 32)
+		return;
+
+	for (i = 0; i < ADM1266_PDIO_NR; i++) {
+		seq_puts(s, adm1266_names[ADM1266_GPIO_NR + i]);
+
+		pdio_config = read_buf[2 * i];
+		pdio_config += (read_buf[2 * i + 1] << 8);
+		pin_cfg = ADM1266_PDIO_PIN_CFG(pdio_config);
+
+		seq_puts(s, " ( ");
+		if (!pin_cfg || pin_cfg > 5) {
+			seq_puts(s, "high-Z )\n");
+			continue;
+		}
+
+		if (pin_cfg & BIT(0))
+			seq_puts(s, "output ");
+
+		if (pin_cfg & BIT(1))
+			seq_puts(s, "input ");
+
+		seq_puts(s, ")\n");
+	}
+}
+
+static int adm1266_config_gpio(struct adm1266_data *data)
+{
+	const char *name = dev_name(&data->client->dev);
+	char *gpio_name;
+	int ret;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(data->gpio_names); i++) {
+		gpio_name = devm_kasprintf(&data->client->dev, GFP_KERNEL,
+					   "adm1266-%x-%s", data->client->addr,
+					   adm1266_names[i]);
+		if (!gpio_name)
+			return -ENOMEM;
+
+		data->gpio_names[i] = gpio_name;
+	}
+
+	data->gc.label = name;
+	data->gc.parent = &data->client->dev;
+	data->gc.owner = THIS_MODULE;
+	data->gc.base = -1;
+	data->gc.names = data->gpio_names;
+	data->gc.ngpio = ARRAY_SIZE(data->gpio_names);
+	data->gc.get = adm1266_gpio_get;
+	data->gc.get_multiple = adm1266_gpio_get_multiple;
+	data->gc.dbg_show = adm1266_gpio_dbg_show;
+
+	ret = devm_gpiochip_add_data(&data->client->dev, &data->gc, data);
+	if (ret)
+		dev_err(&data->client->dev, "GPIO registering failed (%d)\n",
+			ret);
+
+	return ret;
+}
+#else
+static int adm1266_config_gpio(struct adm1266_data *data)
+{
+	return 0;
+}
+#endif
+
 static int adm1266_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
 	struct pmbus_driver_info *info;
+	struct adm1266_data *data;
 	u32 funcs;
+	int ret;
 	int i;
 
-	info = devm_kzalloc(&client->dev, sizeof(struct pmbus_driver_info),
+	data = devm_kzalloc(&client->dev, sizeof(struct adm1266_data),
 			    GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->client = client;
+
+	ret = adm1266_config_gpio(data);
+	if (ret < 0)
+		return ret;
 
 	crc8_populate_msb(pmbus_crc_table, 0x7);
 
+	info = &data->info;
 	info->pages = 17;
 	info->format[PSC_VOLTAGE_OUT] = linear;
 	funcs = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
-- 
2.20.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v5 4/7] hwmon: pmbus: adm1266: Add ioctl commands
  2020-06-24 15:17 [PATCH v5 0/7] hwmon: pmbus: adm1266: add support alexandru.tachici
                   ` (2 preceding siblings ...)
  2020-06-24 15:17 ` [PATCH v5 3/7] hwmon: pmbus: adm1266: Add support for GPIOs alexandru.tachici
@ 2020-06-24 15:17 ` alexandru.tachici
  2020-06-24 15:36   ` Guenter Roeck
  2020-06-24 15:17 ` [PATCH v5 5/7] hwmon: pmbus: adm1266: read blackbox alexandru.tachici
                   ` (2 subsequent siblings)
  6 siblings, 1 reply; 12+ messages in thread
From: alexandru.tachici @ 2020-06-24 15:17 UTC (permalink / raw)
  To: linux-hwmon, linux-kernel, devicetree; +Cc: robh+dt, linux, Alexandru Tachici

From: Alexandru Tachici <alexandru.tachici@analog.com>

Add two ioctl commands for reading the current state
of the adm1266 sequencer and sending commands.

Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
---
 Documentation/hwmon/adm1266.rst               | 15 +++
 .../userspace-api/ioctl/ioctl-number.rst      |  1 +
 drivers/hwmon/pmbus/adm1266.c                 | 97 +++++++++++++++++++
 include/uapi/linux/adm1266.h                  | 16 +++
 4 files changed, 129 insertions(+)
 create mode 100644 include/uapi/linux/adm1266.h

diff --git a/Documentation/hwmon/adm1266.rst b/Documentation/hwmon/adm1266.rst
index 65662115750c..5dc05808db60 100644
--- a/Documentation/hwmon/adm1266.rst
+++ b/Documentation/hwmon/adm1266.rst
@@ -33,3 +33,18 @@ inX_min			Minimum Voltage.
 inX_max			Maximum voltage.
 inX_min_alarm		Voltage low alarm.
 inX_max_alarm		Voltage high alarm.
+
+
+User API
+========
+
+ioctls
+------
+
+ADM1266_SET_GO_COMMAND:
+
+  Issue a GO_COMMAND to the device.
+
+ADM1266_GET_STATUS:
+
+  Returns state of the sequencer.
diff --git a/Documentation/userspace-api/ioctl/ioctl-number.rst b/Documentation/userspace-api/ioctl/ioctl-number.rst
index 59472cd6a11d..df92ca274622 100644
--- a/Documentation/userspace-api/ioctl/ioctl-number.rst
+++ b/Documentation/userspace-api/ioctl/ioctl-number.rst
@@ -348,6 +348,7 @@ Code  Seq#    Include File                                           Comments
 0xCC  00-0F  drivers/misc/ibmvmc.h                                   pseries VMC driver
 0xCD  01     linux/reiserfs_fs.h
 0xCF  02     fs/cifs/ioctl.c
+0xD1  00-0F  linux/adm1266.h
 0xDB  00-0F  drivers/char/mwave/mwavepub.h
 0xDD  00-3F                                                          ZFCP device driver see drivers/s390/scsi/
                                                                      <mailto:aherrman@de.ibm.com>
diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c
index 76bf2c78e737..0960ead8d96a 100644
--- a/drivers/hwmon/pmbus/adm1266.c
+++ b/drivers/hwmon/pmbus/adm1266.c
@@ -15,11 +15,16 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/proc_fs.h>
 #include <linux/slab.h>
+#include <linux/uaccess.h>
 
+#include <linux/adm1266.h>
 #include "pmbus.h"
 
 #define ADM1266_PDIO_CONFIG	0xD4
+#define ADM1266_GO_COMMAND	0xD8
+#define ADM1266_READ_STATE	0xD9
 #define ADM1266_GPIO_CONFIG	0xE1
 #define ADM1266_PDIO_STATUS	0xE9
 #define ADM1266_GPIO_STATUS	0xEA
@@ -46,6 +51,7 @@ struct adm1266_data {
 	struct gpio_chip gc;
 	const char *gpio_names[ADM1266_GPIO_NR + ADM1266_PDIO_NR];
 	struct i2c_client *client;
+	struct mutex ioctl_mutex; /* lock ioctl access */
 };
 
 /* Different from Block Read as it sends data and waits for the slave to
@@ -311,6 +317,93 @@ static int adm1266_config_gpio(struct adm1266_data *data)
 }
 #endif
 
+static int adm1266_set_go_command_op(struct adm1266_data *data, u8 val)
+{
+	val = FIELD_GET(GENMASK(4, 0), val);
+
+	return i2c_smbus_write_word_data(data->client, ADM1266_GO_COMMAND, val);
+}
+
+static int adm1266_ioctl_unlocked(struct file *fp, unsigned int cmd,
+				  unsigned long arg)
+{
+	int __user *argp = (int __user *)arg;
+	struct adm1266_data *data;
+	int val;
+	int ret;
+
+	data = fp->private_data;
+
+	if (!argp)
+		return -EINVAL;
+
+	switch (cmd) {
+	case ADM1266_SET_GO_COMMAND:
+		if (copy_from_user(&val, argp, sizeof(int)))
+			return -EFAULT;
+
+		return adm1266_set_go_command_op(data, val);
+	case ADM1266_GET_STATUS:
+		ret = i2c_smbus_read_word_data(data->client,
+					       ADM1266_READ_STATE);
+
+		if (ret < 0)
+			return ret;
+
+		if (copy_to_user(argp, &ret, sizeof(int)))
+			return -EFAULT;
+
+		break;
+	default:
+		return -ENOTTY;
+	}
+
+	return 0;
+}
+
+static long adm1266_ioctl(struct file *fp, unsigned int cmd, unsigned long arg)
+{
+	struct adm1266_data *data;
+	long ret;
+
+	data = fp->private_data;
+
+	mutex_lock(&data->ioctl_mutex);
+	ret = adm1266_ioctl_unlocked(fp, cmd, arg);
+	mutex_unlock(&data->ioctl_mutex);
+
+	return ret;
+}
+
+static int adm1266_open(struct inode *inode, struct file *filp)
+{
+	filp->private_data = PDE_DATA(inode);
+
+	return 0;
+}
+
+static const struct proc_ops adm1266_proc_ops = {
+	.proc_open	= adm1266_open,
+	.proc_ioctl	= adm1266_ioctl,
+};
+
+static int adm1266_init_procfs(struct adm1266_data *data)
+{
+	struct proc_dir_entry *proc_dir;
+	u8 proc_fs_name[32];
+
+	mutex_init(&data->ioctl_mutex);
+
+	snprintf(proc_fs_name, 32, "adm1266-%x", data->client->addr);
+	proc_dir = proc_create_data(proc_fs_name, 0, NULL, &adm1266_proc_ops,
+				    data);
+
+	if (!proc_dir)
+		return -EINVAL;
+
+	return 0;
+}
+
 static int adm1266_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
@@ -333,6 +426,10 @@ static int adm1266_probe(struct i2c_client *client,
 
 	crc8_populate_msb(pmbus_crc_table, 0x7);
 
+	ret = adm1266_init_procfs(data);
+	if (ret < 0)
+		return ret;
+
 	info = &data->info;
 	info->pages = 17;
 	info->format[PSC_VOLTAGE_OUT] = linear;
diff --git a/include/uapi/linux/adm1266.h b/include/uapi/linux/adm1266.h
new file mode 100644
index 000000000000..535d270ee8c5
--- /dev/null
+++ b/include/uapi/linux/adm1266.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * ADM1266 - Cascadable Super Sequencer with Margin
+ * Control and Fault Recording
+ *
+ * Copyright 2020 Analog Devices Inc.
+ */
+
+#ifndef _LINUX_ADM1266_H
+#define _LINUX_ADM1266_H
+
+/* ADM1266 ioctl commands */
+#define ADM1266_SET_GO_COMMAND		_IOW(0xD1, 0x00, int)
+#define ADM1266_GET_STATUS		_IOR(0xD1, 0x01, int)
+
+#endif
-- 
2.20.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v5 5/7] hwmon: pmbus: adm1266: read blackbox
  2020-06-24 15:17 [PATCH v5 0/7] hwmon: pmbus: adm1266: add support alexandru.tachici
                   ` (3 preceding siblings ...)
  2020-06-24 15:17 ` [PATCH v5 4/7] hwmon: pmbus: adm1266: Add ioctl commands alexandru.tachici
@ 2020-06-24 15:17 ` alexandru.tachici
  2020-06-24 15:17 ` [PATCH v5 6/7] hwmon: pmbus: adm1266: debugfs for blackbox info alexandru.tachici
  2020-06-24 15:17 ` [PATCH v5 7/7] dt-bindings: hwmon: Add bindings for ADM1266 alexandru.tachici
  6 siblings, 0 replies; 12+ messages in thread
From: alexandru.tachici @ 2020-06-24 15:17 UTC (permalink / raw)
  To: linux-hwmon, linux-kernel, devicetree; +Cc: robh+dt, linux, Alexandru Tachici

From: Alexandru Tachici <alexandru.tachici@analog.com>

Use the nvmem kernel api to expose the black box
chip functionality to userspace.

Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
---
 drivers/hwmon/pmbus/adm1266.c | 134 ++++++++++++++++++++++++++++++++++
 1 file changed, 134 insertions(+)

diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c
index 0960ead8d96a..b9e92ab1e39a 100644
--- a/drivers/hwmon/pmbus/adm1266.c
+++ b/drivers/hwmon/pmbus/adm1266.c
@@ -15,6 +15,8 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/nvmem-provider.h>
 #include <linux/proc_fs.h>
 #include <linux/slab.h>
 #include <linux/uaccess.h>
@@ -22,10 +24,13 @@
 #include <linux/adm1266.h>
 #include "pmbus.h"
 
+#define ADM1266_BLACKBOX_CONFIG	0xD3
 #define ADM1266_PDIO_CONFIG	0xD4
 #define ADM1266_GO_COMMAND	0xD8
 #define ADM1266_READ_STATE	0xD9
+#define ADM1266_READ_BLACKBOX	0xDE
 #define ADM1266_GPIO_CONFIG	0xE1
+#define ADM1266_BLACKBOX_INFO	0xE6
 #define ADM1266_PDIO_STATUS	0xE9
 #define ADM1266_GPIO_STATUS	0xEA
 
@@ -42,6 +47,9 @@
 #define ADM1266_PDIO_GLITCH_FILT(x)	FIELD_GET(GENMASK(12, 9), x)
 #define ADM1266_PDIO_OUT_CFG(x)		FIELD_GET(GENMASK(2, 0), x)
 
+#define ADM1266_BLACKBOX_OFFSET		0x7F700
+#define ADM1266_BLACKBOX_SIZE		64
+
 #define ADM1266_PMBUS_BLOCK_MAX		255
 
 DECLARE_CRC8_TABLE(pmbus_crc_table);
@@ -52,6 +60,17 @@ struct adm1266_data {
 	const char *gpio_names[ADM1266_GPIO_NR + ADM1266_PDIO_NR];
 	struct i2c_client *client;
 	struct mutex ioctl_mutex; /* lock ioctl access */
+	struct nvmem_config nvmem_config;
+	struct nvmem_device *nvmem;
+	u8 *dev_mem;
+};
+
+static const struct nvmem_cell_info adm1266_nvmem_cells[] = {
+	{
+		.name           = "blackbox",
+		.offset         = ADM1266_BLACKBOX_OFFSET,
+		.bytes          = 2048,
+	},
 };
 
 /* Different from Block Read as it sends data and waits for the slave to
@@ -404,6 +423,117 @@ static int adm1266_init_procfs(struct adm1266_data *data)
 	return 0;
 }
 
+static int adm1266_nvmem_read_blackbox(struct adm1266_data *data, u8 *buf)
+{
+	u8 read_buf[5];
+	char index;
+	int record_count;
+	int ret;
+
+	ret = i2c_smbus_read_block_data(data->client, ADM1266_BLACKBOX_INFO,
+					read_buf);
+	if (ret < 0)
+		return ret;
+
+	record_count = read_buf[3];
+
+	for (index = 0; index < record_count; index++) {
+		ret = pmbus_block_xfer(data->client, ADM1266_READ_BLACKBOX, 1,
+				       &index, buf);
+		if (ret < 0)
+			return ret;
+
+		buf += ADM1266_BLACKBOX_SIZE;
+	}
+
+	return 0;
+}
+
+static bool adm1266_cell_is_accessed(const struct nvmem_cell_info *mem_cell,
+				     unsigned int offset, size_t bytes)
+{
+	unsigned int start_addr = offset;
+	unsigned int end_addr = offset + bytes;
+	unsigned int cell_start = mem_cell->offset;
+	unsigned int cell_end = mem_cell->offset + mem_cell->bytes;
+
+	if (start_addr <= cell_end && cell_start <= end_addr)
+		return true;
+
+	return false;
+}
+
+static int adm1266_read_mem_cell(struct adm1266_data *data,
+				 const struct nvmem_cell_info *mem_cell)
+{
+	u8 *mem_offset;
+	int ret;
+
+	switch (mem_cell->offset) {
+	case ADM1266_BLACKBOX_OFFSET:
+		mem_offset = data->dev_mem + mem_cell->offset;
+		ret = adm1266_nvmem_read_blackbox(data, mem_offset);
+		if (ret)
+			dev_err(&data->client->dev, "Could not read blackbox!");
+		return ret;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int adm1266_nvmem_read(void *priv, unsigned int offset, void *val,
+			      size_t bytes)
+{
+	const struct nvmem_cell_info *mem_cell;
+	struct adm1266_data *data = priv;
+	int ret;
+	int i;
+
+	for (i = 0; i < data->nvmem_config.ncells; i++) {
+		mem_cell = &adm1266_nvmem_cells[i];
+		if (!adm1266_cell_is_accessed(mem_cell, offset, bytes))
+			continue;
+
+		ret = adm1266_read_mem_cell(data, mem_cell);
+		if (ret < 0)
+			return ret;
+	}
+
+	memcpy(val, data->dev_mem + offset, bytes);
+
+	return 0;
+}
+
+static int adm1266_config_nvmem(struct adm1266_data *data)
+{
+	data->nvmem_config.name = dev_name(&data->client->dev);
+	data->nvmem_config.dev = &data->client->dev;
+	data->nvmem_config.root_only = true;
+	data->nvmem_config.read_only = true;
+	data->nvmem_config.owner = THIS_MODULE;
+	data->nvmem_config.reg_read = adm1266_nvmem_read;
+	data->nvmem_config.cells = adm1266_nvmem_cells;
+	data->nvmem_config.ncells = ARRAY_SIZE(adm1266_nvmem_cells);
+	data->nvmem_config.priv = data;
+	data->nvmem_config.stride = 1;
+	data->nvmem_config.word_size = 1;
+	data->nvmem_config.size = 0x80000;
+
+	data->nvmem = nvmem_register(&data->nvmem_config);
+	if (IS_ERR(data->nvmem)) {
+		dev_err(&data->client->dev, "Could not register nvmem!");
+		return PTR_ERR(data->nvmem);
+	}
+
+	data->dev_mem = devm_kzalloc(&data->client->dev,
+				     data->nvmem_config.size,
+				     GFP_KERNEL);
+	if (!data->dev_mem)
+		return -ENOMEM;
+
+	return 0;
+}
+
 static int adm1266_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
@@ -430,6 +560,10 @@ static int adm1266_probe(struct i2c_client *client,
 	if (ret < 0)
 		return ret;
 
+	ret = adm1266_config_nvmem(data);
+	if (ret < 0)
+		return ret;
+
 	info = &data->info;
 	info->pages = 17;
 	info->format[PSC_VOLTAGE_OUT] = linear;
-- 
2.20.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v5 6/7] hwmon: pmbus: adm1266: debugfs for blackbox info
  2020-06-24 15:17 [PATCH v5 0/7] hwmon: pmbus: adm1266: add support alexandru.tachici
                   ` (4 preceding siblings ...)
  2020-06-24 15:17 ` [PATCH v5 5/7] hwmon: pmbus: adm1266: read blackbox alexandru.tachici
@ 2020-06-24 15:17 ` alexandru.tachici
  2020-06-24 21:53   ` Guenter Roeck
  2020-06-24 15:17 ` [PATCH v5 7/7] dt-bindings: hwmon: Add bindings for ADM1266 alexandru.tachici
  6 siblings, 1 reply; 12+ messages in thread
From: alexandru.tachici @ 2020-06-24 15:17 UTC (permalink / raw)
  To: linux-hwmon, linux-kernel, devicetree; +Cc: robh+dt, linux, Alexandru Tachici

From: Alexandru Tachici <alexandru.tachici@analog.com>

Add a debugfs file to print information in the
BLACKBOX_INFORMATION register. Contains information
about the number of stored records, logic index and id
of the latest record.

Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
---
 drivers/hwmon/pmbus/adm1266.c | 56 ++++++++++++++++++++++++++++++++++-
 1 file changed, 55 insertions(+), 1 deletion(-)

diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c
index b9e92ab1e39a..ea2dc481094b 100644
--- a/drivers/hwmon/pmbus/adm1266.c
+++ b/drivers/hwmon/pmbus/adm1266.c
@@ -60,6 +60,7 @@ struct adm1266_data {
 	const char *gpio_names[ADM1266_GPIO_NR + ADM1266_PDIO_NR];
 	struct i2c_client *client;
 	struct mutex ioctl_mutex; /* lock ioctl access */
+	struct dentry *debugfs_dir;
 	struct nvmem_config nvmem_config;
 	struct nvmem_device *nvmem;
 	u8 *dev_mem;
@@ -406,6 +407,28 @@ static const struct proc_ops adm1266_proc_ops = {
 	.proc_ioctl	= adm1266_ioctl,
 };
 
+static int adm1266_blackbox_information_read(struct seq_file *s, void *pdata)
+{
+	struct device *dev = s->private;
+	struct i2c_client *client = to_i2c_client(dev);
+	u8 read_buf[5];
+	unsigned int latest_id;
+	int ret;
+
+	ret = i2c_smbus_read_block_data(client, ADM1266_BLACKBOX_INFO,
+					read_buf);
+	if (ret < 0)
+		return ret;
+
+	seq_puts(s, "BLACKBOX_INFORMATION:\n");
+	latest_id = read_buf[0] + (read_buf[1] << 8);
+	seq_printf(s, "Black box ID: %u\n", latest_id);
+	seq_printf(s, "Logic index: %u\n", read_buf[2]);
+	seq_printf(s, "Record count: %u\n", read_buf[3]);
+
+	return 0;
+}
+
 static int adm1266_init_procfs(struct adm1266_data *data)
 {
 	struct proc_dir_entry *proc_dir;
@@ -423,6 +446,29 @@ static int adm1266_init_procfs(struct adm1266_data *data)
 	return 0;
 }
 
+static int adm1266_init_debugfs(struct adm1266_data *data)
+{
+	struct dentry *entry;
+	struct dentry *root;
+
+	root = pmbus_get_debugfs_dir(data->client);
+	if (!root)
+		return -ENOENT;
+
+	data->debugfs_dir = debugfs_create_dir(data->client->name, root);
+	if (!data->debugfs_dir)
+		return -ENOENT;
+
+	entry = debugfs_create_devm_seqfile(&data->client->dev,
+					    "blackbox_information",
+					    data->debugfs_dir,
+					    adm1266_blackbox_information_read);
+	if (!entry)
+		return -ENOENT;
+
+	return 0;
+}
+
 static int adm1266_nvmem_read_blackbox(struct adm1266_data *data, u8 *buf)
 {
 	u8 read_buf[5];
@@ -571,7 +617,15 @@ static int adm1266_probe(struct i2c_client *client,
 	for (i = 0; i < info->pages; i++)
 		info->func[i] = funcs;
 
-	return pmbus_do_probe(client, id, info);
+	ret = pmbus_do_probe(client, id, info);
+	if (ret)
+		return ret;
+
+	ret = adm1266_init_debugfs(data);
+	if (ret)
+		dev_warn(&client->dev, "Failed to register debugfs: %d\n", ret);
+
+	return 0;
 }
 
 static const struct of_device_id adm1266_of_match[] = {
-- 
2.20.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v5 7/7] dt-bindings: hwmon: Add bindings for ADM1266
  2020-06-24 15:17 [PATCH v5 0/7] hwmon: pmbus: adm1266: add support alexandru.tachici
                   ` (5 preceding siblings ...)
  2020-06-24 15:17 ` [PATCH v5 6/7] hwmon: pmbus: adm1266: debugfs for blackbox info alexandru.tachici
@ 2020-06-24 15:17 ` alexandru.tachici
  6 siblings, 0 replies; 12+ messages in thread
From: alexandru.tachici @ 2020-06-24 15:17 UTC (permalink / raw)
  To: linux-hwmon, linux-kernel, devicetree; +Cc: robh+dt, linux, Alexandru Tachici

From: Alexandru Tachici <alexandru.tachici@analog.com>

Add bindings for the Analog Devices ADM1266 sequencer.

Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
---
 .../bindings/hwmon/adi,adm1266.yaml           | 56 +++++++++++++++++++
 1 file changed, 56 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml

diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml
new file mode 100644
index 000000000000..76b62be48d56
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/adi,adm1266.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADM1266 Cascadable Super Sequencer with Margin
+  Control and Fault Recording
+
+maintainers:
+  - Alexandru Tachici <alexandru.tachici@analog.com>
+
+description: |
+  Analog Devices ADM1266 Cascadable Super Sequencer with Margin
+  Control and Fault Recording.
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1266.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,adm1266
+
+  reg:
+    description: |
+      I2C address of slave device.
+    items:
+      minimum: 0x40
+      maximum: 0x4F
+
+  avcc-supply:
+    description: |
+      Phandle to the Avcc power supply.
+
+  adi,master-adm1266:
+    description: |
+      Represents phandle of a master ADM1266 device cascaded through the IDB.
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adm1266@40 {
+                compatible = "adi,adm1266";
+                reg = <0x40>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+        };
+    };
+...
-- 
2.20.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v5 4/7] hwmon: pmbus: adm1266: Add ioctl commands
  2020-06-24 15:17 ` [PATCH v5 4/7] hwmon: pmbus: adm1266: Add ioctl commands alexandru.tachici
@ 2020-06-24 15:36   ` Guenter Roeck
  0 siblings, 0 replies; 12+ messages in thread
From: Guenter Roeck @ 2020-06-24 15:36 UTC (permalink / raw)
  To: alexandru.tachici, linux-hwmon, linux-kernel, devicetree; +Cc: robh+dt

On 6/24/20 8:17 AM, alexandru.tachici@analog.com wrote:
> From: Alexandru Tachici <alexandru.tachici@analog.com>
> 
> Add two ioctl commands for reading the current state
> of the adm1266 sequencer and sending commands.
> 

Please note that I am not going to a accept any ioctls for hwmon drivers,
much less unprivileged commands like this.

Guenter

> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
> ---
>  Documentation/hwmon/adm1266.rst               | 15 +++
>  .../userspace-api/ioctl/ioctl-number.rst      |  1 +
>  drivers/hwmon/pmbus/adm1266.c                 | 97 +++++++++++++++++++
>  include/uapi/linux/adm1266.h                  | 16 +++
>  4 files changed, 129 insertions(+)
>  create mode 100644 include/uapi/linux/adm1266.h
> 
> diff --git a/Documentation/hwmon/adm1266.rst b/Documentation/hwmon/adm1266.rst
> index 65662115750c..5dc05808db60 100644
> --- a/Documentation/hwmon/adm1266.rst
> +++ b/Documentation/hwmon/adm1266.rst
> @@ -33,3 +33,18 @@ inX_min			Minimum Voltage.
>  inX_max			Maximum voltage.
>  inX_min_alarm		Voltage low alarm.
>  inX_max_alarm		Voltage high alarm.
> +
> +
> +User API
> +========
> +
> +ioctls
> +------
> +
> +ADM1266_SET_GO_COMMAND:
> +
> +  Issue a GO_COMMAND to the device.
> +
> +ADM1266_GET_STATUS:
> +
> +  Returns state of the sequencer.
> diff --git a/Documentation/userspace-api/ioctl/ioctl-number.rst b/Documentation/userspace-api/ioctl/ioctl-number.rst
> index 59472cd6a11d..df92ca274622 100644
> --- a/Documentation/userspace-api/ioctl/ioctl-number.rst
> +++ b/Documentation/userspace-api/ioctl/ioctl-number.rst
> @@ -348,6 +348,7 @@ Code  Seq#    Include File                                           Comments
>  0xCC  00-0F  drivers/misc/ibmvmc.h                                   pseries VMC driver
>  0xCD  01     linux/reiserfs_fs.h
>  0xCF  02     fs/cifs/ioctl.c
> +0xD1  00-0F  linux/adm1266.h
>  0xDB  00-0F  drivers/char/mwave/mwavepub.h
>  0xDD  00-3F                                                          ZFCP device driver see drivers/s390/scsi/
>                                                                       <mailto:aherrman@de.ibm.com>
> diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c
> index 76bf2c78e737..0960ead8d96a 100644
> --- a/drivers/hwmon/pmbus/adm1266.c
> +++ b/drivers/hwmon/pmbus/adm1266.c
> @@ -15,11 +15,16 @@
>  #include <linux/init.h>
>  #include <linux/kernel.h>
>  #include <linux/module.h>
> +#include <linux/proc_fs.h>
>  #include <linux/slab.h>
> +#include <linux/uaccess.h>
>  
> +#include <linux/adm1266.h>
>  #include "pmbus.h"
>  
>  #define ADM1266_PDIO_CONFIG	0xD4
> +#define ADM1266_GO_COMMAND	0xD8
> +#define ADM1266_READ_STATE	0xD9
>  #define ADM1266_GPIO_CONFIG	0xE1
>  #define ADM1266_PDIO_STATUS	0xE9
>  #define ADM1266_GPIO_STATUS	0xEA
> @@ -46,6 +51,7 @@ struct adm1266_data {
>  	struct gpio_chip gc;
>  	const char *gpio_names[ADM1266_GPIO_NR + ADM1266_PDIO_NR];
>  	struct i2c_client *client;
> +	struct mutex ioctl_mutex; /* lock ioctl access */
>  };
>  
>  /* Different from Block Read as it sends data and waits for the slave to
> @@ -311,6 +317,93 @@ static int adm1266_config_gpio(struct adm1266_data *data)
>  }
>  #endif
>  
> +static int adm1266_set_go_command_op(struct adm1266_data *data, u8 val)
> +{
> +	val = FIELD_GET(GENMASK(4, 0), val);
> +
> +	return i2c_smbus_write_word_data(data->client, ADM1266_GO_COMMAND, val);
> +}
> +
> +static int adm1266_ioctl_unlocked(struct file *fp, unsigned int cmd,
> +				  unsigned long arg)
> +{
> +	int __user *argp = (int __user *)arg;
> +	struct adm1266_data *data;
> +	int val;
> +	int ret;
> +
> +	data = fp->private_data;
> +
> +	if (!argp)
> +		return -EINVAL;
> +
> +	switch (cmd) {
> +	case ADM1266_SET_GO_COMMAND:
> +		if (copy_from_user(&val, argp, sizeof(int)))
> +			return -EFAULT;
> +
> +		return adm1266_set_go_command_op(data, val);
> +	case ADM1266_GET_STATUS:
> +		ret = i2c_smbus_read_word_data(data->client,
> +					       ADM1266_READ_STATE);
> +
> +		if (ret < 0)
> +			return ret;
> +
> +		if (copy_to_user(argp, &ret, sizeof(int)))
> +			return -EFAULT;
> +
> +		break;
> +	default:
> +		return -ENOTTY;
> +	}
> +
> +	return 0;
> +}
> +
> +static long adm1266_ioctl(struct file *fp, unsigned int cmd, unsigned long arg)
> +{
> +	struct adm1266_data *data;
> +	long ret;
> +
> +	data = fp->private_data;
> +
> +	mutex_lock(&data->ioctl_mutex);
> +	ret = adm1266_ioctl_unlocked(fp, cmd, arg);
> +	mutex_unlock(&data->ioctl_mutex);
> +
> +	return ret;
> +}
> +
> +static int adm1266_open(struct inode *inode, struct file *filp)
> +{
> +	filp->private_data = PDE_DATA(inode);
> +
> +	return 0;
> +}
> +
> +static const struct proc_ops adm1266_proc_ops = {
> +	.proc_open	= adm1266_open,
> +	.proc_ioctl	= adm1266_ioctl,
> +};
> +
> +static int adm1266_init_procfs(struct adm1266_data *data)
> +{
> +	struct proc_dir_entry *proc_dir;
> +	u8 proc_fs_name[32];
> +
> +	mutex_init(&data->ioctl_mutex);
> +
> +	snprintf(proc_fs_name, 32, "adm1266-%x", data->client->addr);
> +	proc_dir = proc_create_data(proc_fs_name, 0, NULL, &adm1266_proc_ops,
> +				    data);
> +
> +	if (!proc_dir)
> +		return -EINVAL;
> +
> +	return 0;
> +}
> +
>  static int adm1266_probe(struct i2c_client *client,
>  			 const struct i2c_device_id *id)
>  {
> @@ -333,6 +426,10 @@ static int adm1266_probe(struct i2c_client *client,
>  
>  	crc8_populate_msb(pmbus_crc_table, 0x7);
>  
> +	ret = adm1266_init_procfs(data);
> +	if (ret < 0)
> +		return ret;
> +
>  	info = &data->info;
>  	info->pages = 17;
>  	info->format[PSC_VOLTAGE_OUT] = linear;
> diff --git a/include/uapi/linux/adm1266.h b/include/uapi/linux/adm1266.h
> new file mode 100644
> index 000000000000..535d270ee8c5
> --- /dev/null
> +++ b/include/uapi/linux/adm1266.h
> @@ -0,0 +1,16 @@
> +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
> +/*
> + * ADM1266 - Cascadable Super Sequencer with Margin
> + * Control and Fault Recording
> + *
> + * Copyright 2020 Analog Devices Inc.
> + */
> +
> +#ifndef _LINUX_ADM1266_H
> +#define _LINUX_ADM1266_H
> +
> +/* ADM1266 ioctl commands */
> +#define ADM1266_SET_GO_COMMAND		_IOW(0xD1, 0x00, int)
> +#define ADM1266_GET_STATUS		_IOR(0xD1, 0x01, int)
> +
> +#endif
> 


^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v5 2/7] hwmon: pmbus: adm1266: Add Block process call
  2020-06-24 15:17 ` [PATCH v5 2/7] hwmon: pmbus: adm1266: Add Block process call alexandru.tachici
@ 2020-06-24 17:00   ` kernel test robot
  2020-06-30  2:43   ` [RFC PATCH] hwmon: pmbus: adm1266: pmbus_block_xfer() can be static kernel test robot
  1 sibling, 0 replies; 12+ messages in thread
From: kernel test robot @ 2020-06-24 17:00 UTC (permalink / raw)
  To: alexandru.tachici, linux-hwmon, linux-kernel, devicetree
  Cc: kbuild-all, robh+dt, linux, Alexandru Tachici


[-- Attachment #1: Type: text/plain, Size: 3800 bytes --]

Hi,

I love your patch! Perhaps something to improve:

[auto build test WARNING on hwmon/hwmon-next]
[also build test WARNING on linux/master robh/for-next linus/master v5.8-rc2 next-20200624]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use  as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/alexandru-tachici-analog-com/hwmon-pmbus-adm1266-add-support/20200624-232203
base:   https://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git hwmon-next
config: mips-allyesconfig (attached as .config)
compiler: mips-linux-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=mips 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

>> drivers/hwmon/pmbus/adm1266.c:27:5: warning: no previous prototype for 'pmbus_block_xfer' [-Wmissing-prototypes]
      27 | int pmbus_block_xfer(struct i2c_client *client, u8 cmd, u8 w_len,
         |     ^~~~~~~~~~~~~~~~

vim +/pmbus_block_xfer +27 drivers/hwmon/pmbus/adm1266.c

    21	
    22	/* Different from Block Read as it sends data and waits for the slave to
    23	 * return a value dependent on that data. The protocol is simply a Write Block
    24	 * followed by a Read Block without the Read-Block command field and the
    25	 * Write-Block STOP bit.
    26	 */
  > 27	int pmbus_block_xfer(struct i2c_client *client, u8 cmd, u8 w_len,
    28			     u8 *data_w, u8 *data_r)
    29	{
    30		u8 write_buf[ADM1266_PMBUS_BLOCK_MAX + 2];
    31		struct i2c_msg msgs[2] = {
    32			{
    33				.addr = client->addr,
    34				.flags = 0,
    35				.buf = write_buf,
    36				.len = w_len + 2,
    37			},
    38			{
    39				.addr = client->addr,
    40				.flags = I2C_M_RD,
    41				.len = ADM1266_PMBUS_BLOCK_MAX + 2,
    42			}
    43		};
    44		u8 addr = 0;
    45		u8 crc = 0;
    46		int ret;
    47	
    48		msgs[0].buf[0] = cmd;
    49		msgs[0].buf[1] = w_len;
    50		memcpy(&msgs[0].buf[2], data_w, w_len);
    51	
    52		msgs[0].buf = i2c_get_dma_safe_msg_buf(&msgs[0], 1);
    53		if (!msgs[0].buf)
    54			return -ENOMEM;
    55	
    56		msgs[1].buf = i2c_get_dma_safe_msg_buf(&msgs[1], 1);
    57		if (!msgs[1].buf) {
    58			i2c_put_dma_safe_msg_buf(msgs[0].buf, &msgs[0], false);
    59			return -ENOMEM;
    60		}
    61	
    62		ret = i2c_transfer(client->adapter, msgs, 2);
    63		if (ret != 2) {
    64			ret = -EPROTO;
    65			goto cleanup;
    66		}
    67	
    68		if (client->flags & I2C_CLIENT_PEC) {
    69			addr = i2c_8bit_addr_from_msg(&msgs[0]);
    70			crc = crc8(pmbus_crc_table, &addr, 1, crc);
    71			crc = crc8(pmbus_crc_table, msgs[0].buf,  msgs[0].len, crc);
    72	
    73			addr = i2c_8bit_addr_from_msg(&msgs[1]);
    74			crc = crc8(pmbus_crc_table, &addr, 1, crc);
    75			crc = crc8(pmbus_crc_table, msgs[1].buf,  msgs[1].buf[0] + 1,
    76				   crc);
    77	
    78			if (crc != msgs[1].buf[msgs[1].buf[0] + 1]) {
    79				ret = -EBADMSG;
    80				goto cleanup;
    81			}
    82		}
    83	
    84		memcpy(data_r, &msgs[1].buf[1], msgs[1].buf[0]);
    85		ret = msgs[1].buf[0];
    86	
    87	cleanup:
    88		i2c_put_dma_safe_msg_buf(msgs[0].buf, &msgs[0], true);
    89		i2c_put_dma_safe_msg_buf(msgs[1].buf, &msgs[1], true);
    90	
    91		return ret;
    92	}
    93	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 67044 bytes --]

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v5 6/7] hwmon: pmbus: adm1266: debugfs for blackbox info
  2020-06-24 15:17 ` [PATCH v5 6/7] hwmon: pmbus: adm1266: debugfs for blackbox info alexandru.tachici
@ 2020-06-24 21:53   ` Guenter Roeck
  0 siblings, 0 replies; 12+ messages in thread
From: Guenter Roeck @ 2020-06-24 21:53 UTC (permalink / raw)
  To: alexandru.tachici; +Cc: linux-hwmon, linux-kernel, devicetree, robh+dt

On Wed, Jun 24, 2020 at 06:17:35PM +0300, alexandru.tachici@analog.com wrote:
> From: Alexandru Tachici <alexandru.tachici@analog.com>
> 
> Add a debugfs file to print information in the
> BLACKBOX_INFORMATION register. Contains information
> about the number of stored records, logic index and id
> of the latest record.

How is this different to the nvram method implemented in toe previous patch ?
Why do we need both ?

> 
> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
> ---
>  drivers/hwmon/pmbus/adm1266.c | 56 ++++++++++++++++++++++++++++++++++-
>  1 file changed, 55 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c
> index b9e92ab1e39a..ea2dc481094b 100644
> --- a/drivers/hwmon/pmbus/adm1266.c
> +++ b/drivers/hwmon/pmbus/adm1266.c
> @@ -60,6 +60,7 @@ struct adm1266_data {
>  	const char *gpio_names[ADM1266_GPIO_NR + ADM1266_PDIO_NR];
>  	struct i2c_client *client;
>  	struct mutex ioctl_mutex; /* lock ioctl access */
> +	struct dentry *debugfs_dir;
>  	struct nvmem_config nvmem_config;
>  	struct nvmem_device *nvmem;
>  	u8 *dev_mem;
> @@ -406,6 +407,28 @@ static const struct proc_ops adm1266_proc_ops = {
>  	.proc_ioctl	= adm1266_ioctl,
>  };
>  
> +static int adm1266_blackbox_information_read(struct seq_file *s, void *pdata)
> +{
> +	struct device *dev = s->private;
> +	struct i2c_client *client = to_i2c_client(dev);
> +	u8 read_buf[5];
> +	unsigned int latest_id;
> +	int ret;
> +
> +	ret = i2c_smbus_read_block_data(client, ADM1266_BLACKBOX_INFO,
> +					read_buf);
> +	if (ret < 0)
> +		return ret;
> +
> +	seq_puts(s, "BLACKBOX_INFORMATION:\n");
> +	latest_id = read_buf[0] + (read_buf[1] << 8);
> +	seq_printf(s, "Black box ID: %u\n", latest_id);
> +	seq_printf(s, "Logic index: %u\n", read_buf[2]);
> +	seq_printf(s, "Record count: %u\n", read_buf[3]);
> +
> +	return 0;
> +}
> +
>  static int adm1266_init_procfs(struct adm1266_data *data)
>  {
>  	struct proc_dir_entry *proc_dir;
> @@ -423,6 +446,29 @@ static int adm1266_init_procfs(struct adm1266_data *data)
>  	return 0;
>  }
>  
> +static int adm1266_init_debugfs(struct adm1266_data *data)
> +{
> +	struct dentry *entry;
> +	struct dentry *root;
> +
> +	root = pmbus_get_debugfs_dir(data->client);
> +	if (!root)
> +		return -ENOENT;
> +
> +	data->debugfs_dir = debugfs_create_dir(data->client->name, root);
> +	if (!data->debugfs_dir)
> +		return -ENOENT;
> +
> +	entry = debugfs_create_devm_seqfile(&data->client->dev,
> +					    "blackbox_information",
> +					    data->debugfs_dir,
> +					    adm1266_blackbox_information_read);
> +	if (!entry)
> +		return -ENOENT;
> +
> +	return 0;
> +}
> +
>  static int adm1266_nvmem_read_blackbox(struct adm1266_data *data, u8 *buf)
>  {
>  	u8 read_buf[5];
> @@ -571,7 +617,15 @@ static int adm1266_probe(struct i2c_client *client,
>  	for (i = 0; i < info->pages; i++)
>  		info->func[i] = funcs;
>  
> -	return pmbus_do_probe(client, id, info);
> +	ret = pmbus_do_probe(client, id, info);
> +	if (ret)
> +		return ret;
> +
> +	ret = adm1266_init_debugfs(data);
> +	if (ret)
> +		dev_warn(&client->dev, "Failed to register debugfs: %d\n", ret);

debugfs functions are supposed to fail silently.

> +
> +	return 0;
>  }
>  
>  static const struct of_device_id adm1266_of_match[] = {

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [RFC PATCH] hwmon: pmbus: adm1266: pmbus_block_xfer() can be static
  2020-06-24 15:17 ` [PATCH v5 2/7] hwmon: pmbus: adm1266: Add Block process call alexandru.tachici
  2020-06-24 17:00   ` kernel test robot
@ 2020-06-30  2:43   ` kernel test robot
  1 sibling, 0 replies; 12+ messages in thread
From: kernel test robot @ 2020-06-30  2:43 UTC (permalink / raw)
  To: alexandru.tachici, linux-hwmon, linux-kernel, devicetree
  Cc: kbuild-all, robh+dt, linux, Alexandru Tachici


Signed-off-by: kernel test robot <lkp@intel.com>
---
 adm1266.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c
index 381d89a8569f2..1aa3f0a738151 100644
--- a/drivers/hwmon/pmbus/adm1266.c
+++ b/drivers/hwmon/pmbus/adm1266.c
@@ -24,8 +24,8 @@ DECLARE_CRC8_TABLE(pmbus_crc_table);
  * followed by a Read Block without the Read-Block command field and the
  * Write-Block STOP bit.
  */
-int pmbus_block_xfer(struct i2c_client *client, u8 cmd, u8 w_len,
-		     u8 *data_w, u8 *data_r)
+static int pmbus_block_xfer(struct i2c_client *client, u8 cmd, u8 w_len,
+			    u8 *data_w, u8 *data_r)
 {
 	u8 write_buf[ADM1266_PMBUS_BLOCK_MAX + 2];
 	struct i2c_msg msgs[2] = {

^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, back to index

Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-24 15:17 [PATCH v5 0/7] hwmon: pmbus: adm1266: add support alexandru.tachici
2020-06-24 15:17 ` [PATCH v5 1/7] " alexandru.tachici
2020-06-24 15:17 ` [PATCH v5 2/7] hwmon: pmbus: adm1266: Add Block process call alexandru.tachici
2020-06-24 17:00   ` kernel test robot
2020-06-30  2:43   ` [RFC PATCH] hwmon: pmbus: adm1266: pmbus_block_xfer() can be static kernel test robot
2020-06-24 15:17 ` [PATCH v5 3/7] hwmon: pmbus: adm1266: Add support for GPIOs alexandru.tachici
2020-06-24 15:17 ` [PATCH v5 4/7] hwmon: pmbus: adm1266: Add ioctl commands alexandru.tachici
2020-06-24 15:36   ` Guenter Roeck
2020-06-24 15:17 ` [PATCH v5 5/7] hwmon: pmbus: adm1266: read blackbox alexandru.tachici
2020-06-24 15:17 ` [PATCH v5 6/7] hwmon: pmbus: adm1266: debugfs for blackbox info alexandru.tachici
2020-06-24 21:53   ` Guenter Roeck
2020-06-24 15:17 ` [PATCH v5 7/7] dt-bindings: hwmon: Add bindings for ADM1266 alexandru.tachici

Linux-Hwmon Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-hwmon/0 linux-hwmon/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-hwmon linux-hwmon/ https://lore.kernel.org/linux-hwmon \
		linux-hwmon@vger.kernel.org
	public-inbox-index linux-hwmon

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-hwmon


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git