Linux-Hwmon Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] hwmon:max6697: Allow max6581 to set temperature read offset
@ 2020-06-30 17:43 Chu Lin
  2020-06-30 17:59 ` Guenter Roeck
                   ` (3 more replies)
  0 siblings, 4 replies; 10+ messages in thread
From: Chu Lin @ 2020-06-30 17:43 UTC (permalink / raw)
  To: linux, jdelvare, linchuyuan, linux-hwmon, linux-kernel
  Cc: jasonling, belgaied, zhongqil

Per max6581, reg 4d and reg 4e is used for temperature read offset.
This patch will let the user specify the temperature read offset for
max6581. This patch is tested on max6581 and only applies to max6581.

Testing:
dts: temperature-read-offset = <0xde 0x0>;

verify: iotools smbus_read8 <vbus> 0x4d 0x4e
0x6F

Signed-off-by: Chu Lin <linchuyuan@google.com>
---
 drivers/hwmon/max6697.c               | 19 +++++++++++++++++--
 include/linux/platform_data/max6697.h |  4 ++++
 2 files changed, 21 insertions(+), 2 deletions(-)

diff --git a/drivers/hwmon/max6697.c b/drivers/hwmon/max6697.c
index 743752a2467a..16c0f0995a12 100644
--- a/drivers/hwmon/max6697.c
+++ b/drivers/hwmon/max6697.c
@@ -493,8 +493,13 @@ static void max6697_get_config_of(struct device_node *node,
 	}
 	prop = of_get_property(node, "transistor-ideality", &len);
 	if (prop && len == 2 * sizeof(u32)) {
-			pdata->ideality_mask = be32_to_cpu(prop[0]);
-			pdata->ideality_value = be32_to_cpu(prop[1]);
+		pdata->ideality_mask = be32_to_cpu(prop[0]);
+		pdata->ideality_value = be32_to_cpu(prop[1]);
+	}
+	prop = of_get_property(node, "temperature-read-offset", &len);
+	if  (prop && len == 2 * sizeof(u32)) {
+		pdata->offset_mask = be32_to_cpu(prop[0]);
+		pdata->offset_value = be32_to_cpu(prop[1]);
 	}
 }
 
@@ -586,6 +591,16 @@ static int max6697_init_chip(struct max6697_data *data,
 						pdata->ideality_mask >> 1);
 		if (ret < 0)
 			return ret;
+		ret = i2c_smbus_write_byte_data(client,
+						MAX6581_REG_OFFSET,
+						pdata->offset_value);
+		if (ret < 0)
+			return ret;
+		ret = i2c_smbus_write_byte_data(client,
+						MAX6581_REG_OFFSET_SELECT,
+						pdata->offset_mask >> 1);
+		if (ret < 0)
+			return ret;
 	}
 done:
 	data->update_interval = factor * MAX6697_CONV_TIME;
diff --git a/include/linux/platform_data/max6697.h b/include/linux/platform_data/max6697.h
index 6fbb70005541..ff98adfe9d8d 100644
--- a/include/linux/platform_data/max6697.h
+++ b/include/linux/platform_data/max6697.h
@@ -28,6 +28,10 @@ struct max6697_platform_data {
 	u8 ideality_value;		/* transistor ideality as per
 					 * MAX6581 datasheet
 					 */
+	u8 offset_mask;			/* set bit to 0 to disable */
+	u8 offset_value;		/* temperature read offset as
+					 * MAX6581 datasheet
+					 */
 };
 
 #endif /* MAX6697_H */
-- 
2.27.0.212.ge8ba1cc988-goog


^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, back to index

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-30 17:43 [PATCH] hwmon:max6697: Allow max6581 to set temperature read offset Chu Lin
2020-06-30 17:59 ` Guenter Roeck
2020-07-01 18:43 ` Chu Lin
2020-07-01 18:45 ` Chu Lin
2020-07-02  1:42 ` [PATCH] hwmon:max6697: Allow max6581 to create tempX_offset attributes Chu Lin
2020-07-02  5:14   ` Guenter Roeck
2020-07-02 16:38     ` Chu Lin
2020-07-03  1:06   ` Guenter Roeck
2020-07-06 17:54     ` [PATCH] hwmon:max6697: Allow max6581 to create tempX_offset Chu Lin
2020-07-06 19:32       ` Guenter Roeck

Linux-Hwmon Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-hwmon/0 linux-hwmon/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-hwmon linux-hwmon/ https://lore.kernel.org/linux-hwmon \
		linux-hwmon@vger.kernel.org
	public-inbox-index linux-hwmon

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-hwmon


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git