[PATCH AUTOSEL 4.19 09/19] hwmon: (aspeed-pwm-tacho) Avoid possible buffer overflow

[PATCH AUTOSEL 4.19 09/19] hwmon: (aspeed-pwm-tacho) Avoid possible buffer overflow

[Sasha Levin]

From: Evgeny Novikov <novikov@ispras.ru>

[ Upstream commit bc4071aafcf4d0535ee423b69167696d6c03207d ]

aspeed_create_fan() reads a pwm_port value using of_property_read_u32().
If pwm_port will be more than ARRAY_SIZE(pwm_port_params), there will be
a buffer overflow in
aspeed_create_pwm_port()->aspeed_set_pwm_port_enable(). The patch fixes
the potential buffer overflow.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Link: https://lore.kernel.org/r/20200703111518.9644-1-novikov@ispras.ru
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/aspeed-pwm-tacho.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/hwmon/aspeed-pwm-tacho.c b/drivers/hwmon/aspeed-pwm-tacho.c
index 5e449eac788a1..a43fa730a513b 100644
--- a/drivers/hwmon/aspeed-pwm-tacho.c
+++ b/drivers/hwmon/aspeed-pwm-tacho.c
@@ -880,6 +880,8 @@ static int aspeed_create_fan(struct device *dev,
 	ret = of_property_read_u32(child, "reg", &pwm_port);
 	if (ret)
 		return ret;
+	if (pwm_port >= ARRAY_SIZE(pwm_port_params))
+		return -EINVAL;
 	aspeed_create_pwm_port(priv, (u8)pwm_port);
 
 	ret = of_property_count_u8_elems(child, "cooling-levels");
-- 
2.25.1

[PATCH AUTOSEL 4.19 14/19] hwmon: (adm1275) Make sure we are reading enough data for different chips

[Sasha Levin]

From: Chu Lin <linchuyuan@google.com>

[ Upstream commit 6d1d41c075a1a54ba03370e268171fec20e06563 ]

Issue:
When PEC is enabled, binding adm1272 to the adm1275 would
fail due to PEC error. See below:
adm1275: probe of xxxx failed with error -74

Diagnosis:
Per the datasheet of adm1272, adm1278, adm1293 and amd1294,
PMON_CONFIG (0xd4) is 16bits wide. On the other hand,
PMON_CONFIG (0xd4) for adm1275 is 8bits wide. The driver should not
assume everything is 8bits wide and read only 8bits from it.

Solution:
If it is adm1272, adm1278, adm1293 and adm1294, use i2c_read_word.
Else, use i2c_read_byte

Testing:
Binding adm1272 to the driver.
The change is only tested on adm1272.

Signed-off-by: Chu Lin <linchuyuan@google.com>
Link: https://lore.kernel.org/r/20200709040612.3977094-1-linchuyuan@google.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/pmbus/adm1275.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c
index 13600fa79e7f3..a19cf9052fc6d 100644
--- a/drivers/hwmon/pmbus/adm1275.c
+++ b/drivers/hwmon/pmbus/adm1275.c
@@ -364,6 +364,7 @@ MODULE_DEVICE_TABLE(i2c, adm1275_id);
 static int adm1275_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
+	s32 (*config_read_fn)(const struct i2c_client *client, u8 reg);
 	u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1];
 	int config, device_config;
 	int ret;
@@ -408,11 +409,16 @@ static int adm1275_probe(struct i2c_client *client,
 			   "Device mismatch: Configured %s, detected %s\n",
 			   id->name, mid->name);
 
-	config = i2c_smbus_read_byte_data(client, ADM1275_PMON_CONFIG);
+	if (mid->driver_data == adm1272 || mid->driver_data == adm1278 ||
+	    mid->driver_data == adm1293 || mid->driver_data == adm1294)
+		config_read_fn = i2c_smbus_read_word_data;
+	else
+		config_read_fn = i2c_smbus_read_byte_data;
+	config = config_read_fn(client, ADM1275_PMON_CONFIG);
 	if (config < 0)
 		return config;
 
-	device_config = i2c_smbus_read_byte_data(client, ADM1275_DEVICE_CONFIG);
+	device_config = config_read_fn(client, ADM1275_DEVICE_CONFIG);
 	if (device_config < 0)
 		return device_config;
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 15/19] hwmon: (scmi) Fix potential buffer overflow in scmi_hwmon_probe()

[Sasha Levin]

From: Cristian Marussi <cristian.marussi@arm.com>

[ Upstream commit 3ce17cd2b94907f6d91b81b32848044b84c97606 ]

SMATCH detected a potential buffer overflow in the manipulation of
hwmon_attributes array inside the scmi_hwmon_probe function:

drivers/hwmon/scmi-hwmon.c:226
 scmi_hwmon_probe() error: buffer overflow 'hwmon_attributes' 6 <= 9

Fix it by statically declaring the size of the array as the maximum
possible as defined by hwmon_max define.

Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20200715121338.GA18761@e119603-lin.cambridge.arm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/scmi-hwmon.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hwmon/scmi-hwmon.c b/drivers/hwmon/scmi-hwmon.c
index 91976b6ca3000..91bfecdb3f5ba 100644
--- a/drivers/hwmon/scmi-hwmon.c
+++ b/drivers/hwmon/scmi-hwmon.c
@@ -99,7 +99,7 @@ static enum hwmon_sensor_types scmi_types[] = {
 	[ENERGY] = hwmon_energy,
 };
 
-static u32 hwmon_attributes[] = {
+static u32 hwmon_attributes[hwmon_max] = {
 	[hwmon_chip] = HWMON_C_REGISTER_TZ,
 	[hwmon_temp] = HWMON_T_INPUT | HWMON_T_LABEL,
 	[hwmon_in] = HWMON_I_INPUT | HWMON_I_LABEL,
-- 
2.25.1