* [PATCH v6 1/9] hwmon: pmbus: adm1266: add support
2020-07-27 5:31 [PATCH v6 0/9] hwmon: pmbus: adm1266: add support alexandru.tachici
@ 2020-07-27 5:31 ` alexandru.tachici
2020-07-27 5:31 ` [PATCH v6 2/9] hwmon: pmbus: adm1266: Add Block process call alexandru.tachici
` (8 subsequent siblings)
9 siblings, 0 replies; 12+ messages in thread
From: alexandru.tachici @ 2020-07-27 5:31 UTC (permalink / raw)
To: linux-hwmon, linux-kernel, devicetree; +Cc: robh+dt, linux, Alexandru Tachici
From: Alexandru Tachici <alexandru.tachici@analog.com>
Add pmbus probing driver for the adm1266 Cascadable
Super Sequencer with Margin Control and Fault Recording.
Driver is using the pmbus_core, creating sysfs files
under hwmon for inputs: vh1->vh4 and vp1->vp13.
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
---
Documentation/hwmon/adm1266.rst | 37 +++++++++++++++++++
Documentation/hwmon/index.rst | 1 +
drivers/hwmon/pmbus/Kconfig | 9 +++++
drivers/hwmon/pmbus/Makefile | 1 +
drivers/hwmon/pmbus/adm1266.c | 65 +++++++++++++++++++++++++++++++++
5 files changed, 113 insertions(+)
create mode 100644 Documentation/hwmon/adm1266.rst
create mode 100644 drivers/hwmon/pmbus/adm1266.c
diff --git a/Documentation/hwmon/adm1266.rst b/Documentation/hwmon/adm1266.rst
new file mode 100644
index 000000000000..9257f8a48650
--- /dev/null
+++ b/Documentation/hwmon/adm1266.rst
@@ -0,0 +1,37 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver adm1266
+=====================
+
+Supported chips:
+ * Analog Devices ADM1266
+ Prefix: 'adm1266'
+ Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1266.pdf
+
+Author: Alexandru Tachici <alexandru.tachici@analog.com>
+
+
+Description
+-----------
+
+This driver supports hardware monitoring for Analog Devices ADM1266 sequencer.
+
+ADM1266 is a sequencer that features voltage readback from 17 channels via an
+integrated 12 bit SAR ADC, accessed using a PMBus interface.
+
+The driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus for details on PMBus client drivers.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Limits are read-write, history reset
+attributes are write-only, all other attributes are read-only.
+
+inX_label "voutx"
+inX_input Measured voltage.
+inX_min Minimum Voltage.
+inX_max Maximum voltage.
+inX_min_alarm Voltage low alarm.
+inX_max_alarm Voltage high alarm.
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index 55ff4b7c5349..056f7107d7b8 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -30,6 +30,7 @@ Hardware Monitoring Kernel Drivers
adm1026
adm1031
adm1177
+ adm1266
adm1275
adm9240
ads7828
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index a337195b1c39..da34083e1ffd 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -26,6 +26,15 @@ config SENSORS_PMBUS
This driver can also be built as a module. If so, the module will
be called pmbus.
+config SENSORS_ADM1266
+ tristate "Analog Devices ADM1266 Sequencer"
+ help
+ If you say yes here you get hardware monitoring support for Analog
+ Devices ADM1266 Cascadable Super Sequencer.
+
+ This driver can also be built as a module. If so, the module will
+ be called adm1266.
+
config SENSORS_ADM1275
tristate "Analog Devices ADM1275 and compatibles"
help
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index c4b15db996ad..da41d22be1c9 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -5,6 +5,7 @@
obj-$(CONFIG_PMBUS) += pmbus_core.o
obj-$(CONFIG_SENSORS_PMBUS) += pmbus.o
+obj-$(CONFIG_SENSORS_ADM1266) += adm1266.o
obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o
obj-$(CONFIG_SENSORS_BEL_PFE) += bel-pfe.o
obj-$(CONFIG_SENSORS_IBM_CFFPS) += ibm-cffps.o
diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c
new file mode 100644
index 000000000000..79e8d90886b8
--- /dev/null
+++ b/drivers/hwmon/pmbus/adm1266.c
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ADM1266 - Cascadable Super Sequencer with Margin
+ * Control and Fault Recording
+ *
+ * Copyright 2020 Analog Devices Inc.
+ */
+
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include "pmbus.h"
+#include <linux/slab.h>
+
+struct adm1266_data {
+ struct pmbus_driver_info info;
+ struct i2c_client *client;
+};
+
+static int adm1266_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+ struct adm1266_data *data;
+ int i;
+
+ data = devm_kzalloc(&client->dev, sizeof(struct adm1266_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->client = client;
+ data->info.pages = 17;
+ data->info.format[PSC_VOLTAGE_OUT] = linear;
+ for (i = 0; i < data->info.pages; i++)
+ data->info.func[i] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
+
+ return pmbus_do_probe(client, id, &data->info);
+}
+
+static const struct of_device_id adm1266_of_match[] = {
+ { .compatible = "adi,adm1266" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, adm1266_of_match);
+
+static const struct i2c_device_id adm1266_id[] = {
+ { "adm1266", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, adm1266_id);
+
+static struct i2c_driver adm1266_driver = {
+ .driver = {
+ .name = "adm1266",
+ .of_match_table = adm1266_of_match,
+ },
+ .probe = adm1266_probe,
+ .remove = pmbus_do_remove,
+ .id_table = adm1266_id,
+};
+
+module_i2c_driver(adm1266_driver);
+
+MODULE_AUTHOR("Alexandru Tachici <alexandru.tachici@analog.com>");
+MODULE_DESCRIPTION("PMBus driver for Analog Devices ADM1266");
+MODULE_LICENSE("GPL v2");
--
2.20.1
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v6 2/9] hwmon: pmbus: adm1266: Add Block process call
2020-07-27 5:31 [PATCH v6 0/9] hwmon: pmbus: adm1266: add support alexandru.tachici
2020-07-27 5:31 ` [PATCH v6 1/9] " alexandru.tachici
@ 2020-07-27 5:31 ` alexandru.tachici
2020-07-27 5:31 ` [PATCH v6 3/9] hwmon: pmbus: adm1266: Add support for GPIOs alexandru.tachici
` (7 subsequent siblings)
9 siblings, 0 replies; 12+ messages in thread
From: alexandru.tachici @ 2020-07-27 5:31 UTC (permalink / raw)
To: linux-hwmon, linux-kernel, devicetree; +Cc: robh+dt, linux, Alexandru Tachici
From: Alexandru Tachici <alexandru.tachici@analog.com>
PmBus devices support Block Write-Block Read Process
Call described in SMBus specification v 2.0 with the
exception that Block writes and reads are permitted to
have up 255 data bytes instead of max 32 bytes (SMBus).
This patch adds Block WR process call support for ADM1266.
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
---
drivers/hwmon/pmbus/Kconfig | 1 +
drivers/hwmon/pmbus/adm1266.c | 73 +++++++++++++++++++++++++++++++++++
2 files changed, 74 insertions(+)
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index da34083e1ffd..c04068b665e6 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -28,6 +28,7 @@ config SENSORS_PMBUS
config SENSORS_ADM1266
tristate "Analog Devices ADM1266 Sequencer"
+ select CRC8
help
If you say yes here you get hardware monitoring support for Analog
Devices ADM1266 Cascadable Super Sequencer.
diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c
index 79e8d90886b8..63975eba34ad 100644
--- a/drivers/hwmon/pmbus/adm1266.c
+++ b/drivers/hwmon/pmbus/adm1266.c
@@ -6,6 +6,7 @@
* Copyright 2020 Analog Devices Inc.
*/
+#include <linux/crc8.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/kernel.h>
@@ -13,11 +14,80 @@
#include "pmbus.h"
#include <linux/slab.h>
+#define ADM1266_PMBUS_BLOCK_MAX 255
+
struct adm1266_data {
struct pmbus_driver_info info;
struct i2c_client *client;
+ struct mutex buf_mutex;
+ u8 write_buf[ADM1266_PMBUS_BLOCK_MAX + 1] ____cacheline_aligned;
+ u8 read_buf[ADM1266_PMBUS_BLOCK_MAX + 1] ____cacheline_aligned;
};
+DECLARE_CRC8_TABLE(pmbus_crc_table);
+
+/*
+ * Different from Block Read as it sends data and waits for the slave to
+ * return a value dependent on that data. The protocol is simply a Write Block
+ * followed by a Read Block without the Read-Block command field and the
+ * Write-Block STOP bit.
+ */
+static int adm1266_pmbus_block_xfer(struct adm1266_data *data, u8 cmd, u8 w_len, u8 *data_w,
+ u8 *data_r)
+{
+ struct i2c_client *client = data->client;
+ struct i2c_msg msgs[2] = {
+ {
+ .addr = client->addr,
+ .flags = I2C_M_DMA_SAFE,
+ .buf = data->write_buf,
+ .len = w_len + 2,
+ },
+ {
+ .addr = client->addr,
+ .flags = I2C_M_RD | I2C_M_DMA_SAFE,
+ .buf = data->read_buf,
+ .len = ADM1266_PMBUS_BLOCK_MAX + 2,
+ }
+ };
+ u8 addr;
+ u8 crc;
+ int ret;
+
+ mutex_lock(&data->buf_mutex);
+
+ msgs[0].buf[0] = cmd;
+ msgs[0].buf[1] = w_len;
+ memcpy(&msgs[0].buf[2], data_w, w_len);
+
+ ret = i2c_transfer(client->adapter, msgs, 2);
+ if (ret != 2) {
+ if (ret >= 0)
+ ret = -EPROTO;
+ return ret;
+ }
+
+ if (client->flags & I2C_CLIENT_PEC) {
+ addr = i2c_8bit_addr_from_msg(&msgs[0]);
+ crc = crc8(pmbus_crc_table, &addr, 1, 0);
+ crc = crc8(pmbus_crc_table, msgs[0].buf, msgs[0].len, crc);
+
+ addr = i2c_8bit_addr_from_msg(&msgs[1]);
+ crc = crc8(pmbus_crc_table, &addr, 1, crc);
+ crc = crc8(pmbus_crc_table, msgs[1].buf, msgs[1].buf[0] + 1, crc);
+
+ if (crc != msgs[1].buf[msgs[1].buf[0] + 1])
+ return -EBADMSG;
+ }
+
+ memcpy(data_r, &msgs[1].buf[1], msgs[1].buf[0]);
+
+ ret = msgs[1].buf[0];
+ mutex_unlock(&data->buf_mutex);
+
+ return ret;
+}
+
static int adm1266_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
struct adm1266_data *data;
@@ -33,6 +103,9 @@ static int adm1266_probe(struct i2c_client *client, const struct i2c_device_id *
for (i = 0; i < data->info.pages; i++)
data->info.func[i] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
+ crc8_populate_msb(pmbus_crc_table, 0x7);
+ mutex_init(&data->buf_mutex);
+
return pmbus_do_probe(client, id, &data->info);
}
--
2.20.1
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v6 3/9] hwmon: pmbus: adm1266: Add support for GPIOs
2020-07-27 5:31 [PATCH v6 0/9] hwmon: pmbus: adm1266: add support alexandru.tachici
2020-07-27 5:31 ` [PATCH v6 1/9] " alexandru.tachici
2020-07-27 5:31 ` [PATCH v6 2/9] hwmon: pmbus: adm1266: Add Block process call alexandru.tachici
@ 2020-07-27 5:31 ` alexandru.tachici
2020-07-27 5:31 ` [PATCH v6 4/9] hwmon: pmbus: adm1266: add debugfs for states alexandru.tachici
` (6 subsequent siblings)
9 siblings, 0 replies; 12+ messages in thread
From: alexandru.tachici @ 2020-07-27 5:31 UTC (permalink / raw)
To: linux-hwmon, linux-kernel, devicetree; +Cc: robh+dt, linux, Alexandru Tachici
From: Alexandru Tachici <alexandru.tachici@analog.com>
Adm1266 exposes 9 GPIOs and 16 PDIOs which are currently read-only. They
are controlled by the internal sequencing engine.
This patch makes adm1266 driver expose GPIOs and PDIOs to user-space
using GPIO provider kernel api.
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
---
drivers/hwmon/pmbus/adm1266.c | 204 ++++++++++++++++++++++++++++++++++
1 file changed, 204 insertions(+)
diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c
index 63975eba34ad..be911de02cf6 100644
--- a/drivers/hwmon/pmbus/adm1266.c
+++ b/drivers/hwmon/pmbus/adm1266.c
@@ -6,18 +6,42 @@
* Copyright 2020 Analog Devices Inc.
*/
+#include <linux/bitfield.h>
#include <linux/crc8.h>
+#include <linux/debugfs.h>
+#include <linux/gpio/driver.h>
#include <linux/i2c.h>
+#include <linux/i2c-smbus.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include "pmbus.h"
#include <linux/slab.h>
+#define ADM1266_PDIO_CONFIG 0xD4
+#define ADM1266_GPIO_CONFIG 0xE1
+#define ADM1266_PDIO_STATUS 0xE9
+#define ADM1266_GPIO_STATUS 0xEA
+
+/* ADM1266 GPIO defines */
+#define ADM1266_GPIO_NR 9
+#define ADM1266_GPIO_FUNCTIONS(x) FIELD_GET(BIT(0), x)
+#define ADM1266_GPIO_INPUT_EN(x) FIELD_GET(BIT(2), x)
+#define ADM1266_GPIO_OUTPUT_EN(x) FIELD_GET(BIT(3), x)
+#define ADM1266_GPIO_OPEN_DRAIN(x) FIELD_GET(BIT(4), x)
+
+/* ADM1266 PDIO defines */
+#define ADM1266_PDIO_NR 16
+#define ADM1266_PDIO_PIN_CFG(x) FIELD_GET(GENMASK(15, 13), x)
+#define ADM1266_PDIO_GLITCH_FILT(x) FIELD_GET(GENMASK(12, 9), x)
+#define ADM1266_PDIO_OUT_CFG(x) FIELD_GET(GENMASK(2, 0), x)
+
#define ADM1266_PMBUS_BLOCK_MAX 255
struct adm1266_data {
struct pmbus_driver_info info;
+ struct gpio_chip gc;
+ const char *gpio_names[ADM1266_GPIO_NR + ADM1266_PDIO_NR];
struct i2c_client *client;
struct mutex buf_mutex;
u8 write_buf[ADM1266_PMBUS_BLOCK_MAX + 1] ____cacheline_aligned;
@@ -88,9 +112,185 @@ static int adm1266_pmbus_block_xfer(struct adm1266_data *data, u8 cmd, u8 w_len,
return ret;
}
+static const unsigned int adm1266_gpio_mapping[ADM1266_GPIO_NR][2] = {
+ {1, 0},
+ {2, 1},
+ {3, 2},
+ {4, 8},
+ {5, 9},
+ {6, 10},
+ {7, 11},
+ {8, 6},
+ {9, 7},
+};
+
+static const char *adm1266_names[ADM1266_GPIO_NR + ADM1266_PDIO_NR] = {
+ "GPIO1", "GPIO2", "GPIO3", "GPIO4", "GPIO5", "GPIO6", "GPIO7", "GPIO8",
+ "GPIO9", "PDIO1", "PDIO2", "PDIO3", "PDIO4", "PDIO5", "PDIO6",
+ "PDIO7", "PDIO8", "PDIO9", "PDIO10", "PDIO11", "PDIO12", "PDIO13",
+ "PDIO14", "PDIO15", "PDIO16",
+};
+
+static int adm1266_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+ struct adm1266_data *data = gpiochip_get_data(chip);
+ u8 read_buf[I2C_SMBUS_BLOCK_MAX + 1];
+ unsigned long pins_status;
+ unsigned int pmbus_cmd;
+ int ret;
+
+ if (offset < ADM1266_GPIO_NR)
+ pmbus_cmd = ADM1266_GPIO_STATUS;
+ else
+ pmbus_cmd = ADM1266_PDIO_STATUS;
+
+ ret = i2c_smbus_read_block_data(data->client, pmbus_cmd, read_buf);
+ if (ret < 0)
+ return ret;
+
+ pins_status = read_buf[0] + (read_buf[1] << 8);
+ if (offset < ADM1266_GPIO_NR)
+ return test_bit(adm1266_gpio_mapping[offset][1], &pins_status);
+
+ return test_bit(offset - ADM1266_GPIO_NR, &pins_status);
+}
+
+static int adm1266_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
+ unsigned long *bits)
+{
+ struct adm1266_data *data = gpiochip_get_data(chip);
+ u8 read_buf[ADM1266_PMBUS_BLOCK_MAX + 1];
+ unsigned long status;
+ unsigned int gpio_nr;
+ int ret;
+
+ ret = i2c_smbus_read_block_data(data->client, ADM1266_GPIO_STATUS, read_buf);
+ if (ret < 0)
+ return ret;
+
+ status = read_buf[0] + (read_buf[1] << 8);
+
+ *bits = 0;
+ for_each_set_bit(gpio_nr, mask, ADM1266_GPIO_NR) {
+ if (test_bit(adm1266_gpio_mapping[gpio_nr][1], &status))
+ set_bit(gpio_nr, bits);
+ }
+
+ ret = i2c_smbus_read_block_data(data->client, ADM1266_PDIO_STATUS, read_buf);
+ if (ret < 0)
+ return ret;
+
+ status = read_buf[0] + (read_buf[1] << 8);
+
+ *bits = 0;
+ for_each_set_bit_from(gpio_nr, mask, ADM1266_GPIO_NR + ADM1266_PDIO_STATUS) {
+ if (test_bit(gpio_nr - ADM1266_GPIO_NR, &status))
+ set_bit(gpio_nr, bits);
+ }
+
+ return 0;
+}
+
+static void adm1266_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+ struct adm1266_data *data = gpiochip_get_data(chip);
+ u8 read_buf[ADM1266_PMBUS_BLOCK_MAX + 1];
+ unsigned long gpio_config;
+ unsigned long pdio_config;
+ unsigned long pin_cfg;
+ u8 write_cmd;
+ int ret;
+ int i;
+
+ for (i = 0; i < ADM1266_GPIO_NR; i++) {
+ write_cmd = adm1266_gpio_mapping[i][1];
+ ret = adm1266_pmbus_block_xfer(data, ADM1266_GPIO_CONFIG, 1, &write_cmd, read_buf);
+ if (ret != 2)
+ return;
+
+ gpio_config = read_buf[0];
+ seq_puts(s, adm1266_names[i]);
+
+ seq_puts(s, " ( ");
+ if (!ADM1266_GPIO_FUNCTIONS(gpio_config)) {
+ seq_puts(s, "high-Z )\n");
+ continue;
+ }
+ if (ADM1266_GPIO_INPUT_EN(gpio_config))
+ seq_puts(s, "input ");
+ if (ADM1266_GPIO_OUTPUT_EN(gpio_config))
+ seq_puts(s, "output ");
+ if (ADM1266_GPIO_OPEN_DRAIN(gpio_config))
+ seq_puts(s, "open-drain )\n");
+ else
+ seq_puts(s, "push-pull )\n");
+ }
+
+ write_cmd = 0xFF;
+ ret = adm1266_pmbus_block_xfer(data, ADM1266_PDIO_CONFIG, 1, &write_cmd, read_buf);
+ if (ret != 32)
+ return;
+
+ for (i = 0; i < ADM1266_PDIO_NR; i++) {
+ seq_puts(s, adm1266_names[ADM1266_GPIO_NR + i]);
+
+ pdio_config = read_buf[2 * i];
+ pdio_config += (read_buf[2 * i + 1] << 8);
+ pin_cfg = ADM1266_PDIO_PIN_CFG(pdio_config);
+
+ seq_puts(s, " ( ");
+ if (!pin_cfg || pin_cfg > 5) {
+ seq_puts(s, "high-Z )\n");
+ continue;
+ }
+
+ if (pin_cfg & BIT(0))
+ seq_puts(s, "output ");
+
+ if (pin_cfg & BIT(1))
+ seq_puts(s, "input ");
+
+ seq_puts(s, ")\n");
+ }
+}
+
+static int adm1266_config_gpio(struct adm1266_data *data)
+{
+ const char *name = dev_name(&data->client->dev);
+ char *gpio_name;
+ int ret;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(data->gpio_names); i++) {
+ gpio_name = devm_kasprintf(&data->client->dev, GFP_KERNEL, "adm1266-%x-%s",
+ data->client->addr, adm1266_names[i]);
+ if (!gpio_name)
+ return -ENOMEM;
+
+ data->gpio_names[i] = gpio_name;
+ }
+
+ data->gc.label = name;
+ data->gc.parent = &data->client->dev;
+ data->gc.owner = THIS_MODULE;
+ data->gc.base = -1;
+ data->gc.names = data->gpio_names;
+ data->gc.ngpio = ARRAY_SIZE(data->gpio_names);
+ data->gc.get = adm1266_gpio_get;
+ data->gc.get_multiple = adm1266_gpio_get_multiple;
+ data->gc.dbg_show = adm1266_gpio_dbg_show;
+
+ ret = devm_gpiochip_add_data(&data->client->dev, &data->gc, data);
+ if (ret)
+ dev_err(&data->client->dev, "GPIO registering failed (%d)\n", ret);
+
+ return ret;
+}
+
static int adm1266_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
struct adm1266_data *data;
+ int ret;
int i;
data = devm_kzalloc(&client->dev, sizeof(struct adm1266_data), GFP_KERNEL);
@@ -106,6 +306,10 @@ static int adm1266_probe(struct i2c_client *client, const struct i2c_device_id *
crc8_populate_msb(pmbus_crc_table, 0x7);
mutex_init(&data->buf_mutex);
+ ret = adm1266_config_gpio(data);
+ if (ret < 0)
+ return ret;
+
return pmbus_do_probe(client, id, &data->info);
}
--
2.20.1
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v6 4/9] hwmon: pmbus: adm1266: add debugfs for states
2020-07-27 5:31 [PATCH v6 0/9] hwmon: pmbus: adm1266: add support alexandru.tachici
` (2 preceding siblings ...)
2020-07-27 5:31 ` [PATCH v6 3/9] hwmon: pmbus: adm1266: Add support for GPIOs alexandru.tachici
@ 2020-07-27 5:31 ` alexandru.tachici
2020-07-27 6:52 ` kernel test robot
2020-07-27 5:31 ` [PATCH v6 5/9] hwmon: pmbus: adm1266: read blackbox alexandru.tachici
` (5 subsequent siblings)
9 siblings, 1 reply; 12+ messages in thread
From: alexandru.tachici @ 2020-07-27 5:31 UTC (permalink / raw)
To: linux-hwmon, linux-kernel, devicetree; +Cc: robh+dt, linux, Alexandru Tachici
From: Alexandru Tachici <alexandru.tachici@analog.com>
Add a debugfs entry which prints the current state
of the adm1266 sequencer.
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
---
drivers/hwmon/pmbus/adm1266.c | 42 ++++++++++++++++++++++++++++++++++-
1 file changed, 41 insertions(+), 1 deletion(-)
diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c
index be911de02cf6..dbffc6d12e87 100644
--- a/drivers/hwmon/pmbus/adm1266.c
+++ b/drivers/hwmon/pmbus/adm1266.c
@@ -19,6 +19,7 @@
#include <linux/slab.h>
#define ADM1266_PDIO_CONFIG 0xD4
+#define ADM1266_READ_STATE 0xD9
#define ADM1266_GPIO_CONFIG 0xE1
#define ADM1266_PDIO_STATUS 0xE9
#define ADM1266_GPIO_STATUS 0xEA
@@ -43,6 +44,7 @@ struct adm1266_data {
struct gpio_chip gc;
const char *gpio_names[ADM1266_GPIO_NR + ADM1266_PDIO_NR];
struct i2c_client *client;
+ struct dentry *debugfs_dir;
struct mutex buf_mutex;
u8 write_buf[ADM1266_PMBUS_BLOCK_MAX + 1] ____cacheline_aligned;
u8 read_buf[ADM1266_PMBUS_BLOCK_MAX + 1] ____cacheline_aligned;
@@ -287,6 +289,38 @@ static int adm1266_config_gpio(struct adm1266_data *data)
return ret;
}
+static int adm1266_state_read(struct seq_file *s, void *pdata)
+{
+ struct device *dev = s->private;
+ struct i2c_client *client = to_i2c_client(dev);
+ int ret;
+
+ ret = i2c_smbus_read_word_data(client, ADM1266_READ_STATE);
+ if (ret < 0)
+ return ret;
+
+ seq_printf(s, "%d\n", ret);
+
+ return 0;
+}
+
+static void adm1266_init_debugfs(struct adm1266_data *data)
+{
+ struct dentry *entry;
+ struct dentry *root;
+
+ root = pmbus_get_debugfs_dir(data->client);
+ if (!root)
+ return;
+
+ data->debugfs_dir = debugfs_create_dir(data->client->name, root);
+ if (!data->debugfs_dir)
+ return;
+
+ entry = debugfs_create_devm_seqfile(&data->client->dev, "sequencer_state",
+ data->debugfs_dir, adm1266_state_read);
+}
+
static int adm1266_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
struct adm1266_data *data;
@@ -310,7 +344,13 @@ static int adm1266_probe(struct i2c_client *client, const struct i2c_device_id *
if (ret < 0)
return ret;
- return pmbus_do_probe(client, id, &data->info);
+ ret = pmbus_do_probe(client, id, &data->info);
+ if (ret)
+ return ret;
+
+ adm1266_init_debugfs(data);
+
+ return 0;
}
static const struct of_device_id adm1266_of_match[] = {
--
2.20.1
^ permalink raw reply related [flat|nested] 12+ messages in thread* Re: [PATCH v6 4/9] hwmon: pmbus: adm1266: add debugfs for states
2020-07-27 5:31 ` [PATCH v6 4/9] hwmon: pmbus: adm1266: add debugfs for states alexandru.tachici
@ 2020-07-27 6:52 ` kernel test robot
0 siblings, 0 replies; 12+ messages in thread
From: kernel test robot @ 2020-07-27 6:52 UTC (permalink / raw)
To: alexandru.tachici, linux-hwmon, linux-kernel, devicetree
Cc: kbuild-all, robh+dt, linux, Alexandru Tachici
[-- Attachment #1: Type: text/plain, Size: 2092 bytes --]
Hi,
I love your patch! Perhaps something to improve:
[auto build test WARNING on hwmon/hwmon-next]
[also build test WARNING on linux/master robh/for-next linus/master v5.8-rc7 next-20200724]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/alexandru-tachici-analog-com/hwmon-pmbus-adm1266-add-support/20200727-133122
base: https://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git hwmon-next
config: ia64-allmodconfig (attached as .config)
compiler: ia64-linux-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=ia64
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All warnings (new ones prefixed by >>):
drivers/hwmon/pmbus/adm1266.c: In function 'adm1266_init_debugfs':
>> drivers/hwmon/pmbus/adm1266.c:309:17: warning: variable 'entry' set but not used [-Wunused-but-set-variable]
309 | struct dentry *entry;
| ^~~~~
vim +/entry +309 drivers/hwmon/pmbus/adm1266.c
306
307 static void adm1266_init_debugfs(struct adm1266_data *data)
308 {
> 309 struct dentry *entry;
310 struct dentry *root;
311
312 root = pmbus_get_debugfs_dir(data->client);
313 if (!root)
314 return;
315
316 data->debugfs_dir = debugfs_create_dir(data->client->name, root);
317 if (!data->debugfs_dir)
318 return;
319
320 entry = debugfs_create_devm_seqfile(&data->client->dev, "sequencer_state",
321 data->debugfs_dir, adm1266_state_read);
322 }
323
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 61115 bytes --]
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v6 5/9] hwmon: pmbus: adm1266: read blackbox
2020-07-27 5:31 [PATCH v6 0/9] hwmon: pmbus: adm1266: add support alexandru.tachici
` (3 preceding siblings ...)
2020-07-27 5:31 ` [PATCH v6 4/9] hwmon: pmbus: adm1266: add debugfs for states alexandru.tachici
@ 2020-07-27 5:31 ` alexandru.tachici
2020-07-27 5:31 ` [PATCH v6 6/9] hwmon: pmbus: adm1266: Add group command support alexandru.tachici
` (4 subsequent siblings)
9 siblings, 0 replies; 12+ messages in thread
From: alexandru.tachici @ 2020-07-27 5:31 UTC (permalink / raw)
To: linux-hwmon, linux-kernel, devicetree; +Cc: robh+dt, linux, Alexandru Tachici
From: Alexandru Tachici <alexandru.tachici@analog.com>
Use the nvmem kernel api to expose the black box
chip functionality to userspace.
Using this feature, the device is capable of recording
to nonvolatile flash memory the vital data about the
system status that caused the system to perform a
black box write.
A blackbox is 64 bytes of data containing all the
status registers, last two states of the sequencer,
timestamp and counters. The mapping of this data is
described in the adm1266 datasheet.
On power-up the driver sets the unix time to
the adm1266 using the SET_RTC command. This value
is incremented by an internal clock and it is used
as timestamp for the black box feature.
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
---
drivers/hwmon/pmbus/adm1266.c | 165 ++++++++++++++++++++++++++++++++++
1 file changed, 165 insertions(+)
diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c
index dbffc6d12e87..c06465100320 100644
--- a/drivers/hwmon/pmbus/adm1266.c
+++ b/drivers/hwmon/pmbus/adm1266.c
@@ -15,12 +15,19 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/nvmem-provider.h>
#include "pmbus.h"
#include <linux/slab.h>
+#include <linux/timekeeping.h>
+#define ADM1266_BLACKBOX_CONFIG 0xD3
#define ADM1266_PDIO_CONFIG 0xD4
#define ADM1266_READ_STATE 0xD9
+#define ADM1266_READ_BLACKBOX 0xDE
+#define ADM1266_SET_RTC 0xDF
#define ADM1266_GPIO_CONFIG 0xE1
+#define ADM1266_BLACKBOX_INFO 0xE6
#define ADM1266_PDIO_STATUS 0xE9
#define ADM1266_GPIO_STATUS 0xEA
@@ -37,6 +44,9 @@
#define ADM1266_PDIO_GLITCH_FILT(x) FIELD_GET(GENMASK(12, 9), x)
#define ADM1266_PDIO_OUT_CFG(x) FIELD_GET(GENMASK(2, 0), x)
+#define ADM1266_BLACKBOX_OFFSET 0x7F700
+#define ADM1266_BLACKBOX_SIZE 64
+
#define ADM1266_PMBUS_BLOCK_MAX 255
struct adm1266_data {
@@ -45,11 +55,22 @@ struct adm1266_data {
const char *gpio_names[ADM1266_GPIO_NR + ADM1266_PDIO_NR];
struct i2c_client *client;
struct dentry *debugfs_dir;
+ struct nvmem_config nvmem_config;
+ struct nvmem_device *nvmem;
+ u8 *dev_mem;
struct mutex buf_mutex;
u8 write_buf[ADM1266_PMBUS_BLOCK_MAX + 1] ____cacheline_aligned;
u8 read_buf[ADM1266_PMBUS_BLOCK_MAX + 1] ____cacheline_aligned;
};
+static const struct nvmem_cell_info adm1266_nvmem_cells[] = {
+ {
+ .name = "blackbox",
+ .offset = ADM1266_BLACKBOX_OFFSET,
+ .bytes = 2048,
+ },
+};
+
DECLARE_CRC8_TABLE(pmbus_crc_table);
/*
@@ -321,6 +342,142 @@ static void adm1266_init_debugfs(struct adm1266_data *data)
data->debugfs_dir, adm1266_state_read);
}
+#if IS_ENABLED(CONFIG_NVMEM)
+static int adm1266_nvmem_read_blackbox(struct adm1266_data *data, u8 *read_buff)
+{
+ int record_count;
+ char index;
+ u8 buf[5];
+ int ret;
+
+ ret = i2c_smbus_read_block_data(data->client, ADM1266_BLACKBOX_INFO, buf);
+ if (ret < 0)
+ return ret;
+
+ if (ret != 4)
+ return -EIO;
+
+ record_count = buf[3];
+
+ for (index = 0; index < record_count; index++) {
+ ret = adm1266_pmbus_block_xfer(data, ADM1266_READ_BLACKBOX, 1, &index, read_buff);
+ if (ret < 0)
+ return ret;
+
+ if (ret != ADM1266_BLACKBOX_SIZE)
+ return -EIO;
+
+ read_buff += ADM1266_BLACKBOX_SIZE;
+ }
+
+ return 0;
+}
+
+static bool adm1266_cell_is_accessed(const struct nvmem_cell_info *mem_cell, unsigned int offset,
+ size_t bytes)
+{
+ unsigned int start_addr = offset;
+ unsigned int end_addr = offset + bytes;
+ unsigned int cell_start = mem_cell->offset;
+ unsigned int cell_end = mem_cell->offset + mem_cell->bytes;
+
+ return start_addr <= cell_end && cell_start <= end_addr;
+}
+
+static int adm1266_read_mem_cell(struct adm1266_data *data, const struct nvmem_cell_info *mem_cell)
+{
+ u8 *mem_offset;
+ int ret;
+
+ switch (mem_cell->offset) {
+ case ADM1266_BLACKBOX_OFFSET:
+ mem_offset = data->dev_mem + mem_cell->offset;
+
+ memset(mem_offset, 0, ADM1266_BLACKBOX_SIZE);
+
+ ret = adm1266_nvmem_read_blackbox(data, mem_offset);
+ if (ret)
+ dev_err(&data->client->dev, "Could not read blackbox!");
+ return ret;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int adm1266_nvmem_read(void *priv, unsigned int offset, void *val,
+ size_t bytes)
+{
+ const struct nvmem_cell_info *mem_cell;
+ struct adm1266_data *data = priv;
+ int ret;
+ int i;
+
+ for (i = 0; i < data->nvmem_config.ncells; i++) {
+ mem_cell = &adm1266_nvmem_cells[i];
+ if (!adm1266_cell_is_accessed(mem_cell, offset, bytes))
+ continue;
+
+ ret = adm1266_read_mem_cell(data, mem_cell);
+ if (ret < 0)
+ return ret;
+ }
+
+ memcpy(val, data->dev_mem + offset, bytes);
+
+ return 0;
+}
+
+static int adm1266_config_nvmem(struct adm1266_data *data)
+{
+ data->nvmem_config.name = dev_name(&data->client->dev);
+ data->nvmem_config.dev = &data->client->dev;
+ data->nvmem_config.root_only = true;
+ data->nvmem_config.read_only = true;
+ data->nvmem_config.owner = THIS_MODULE;
+ data->nvmem_config.reg_read = adm1266_nvmem_read;
+ data->nvmem_config.cells = adm1266_nvmem_cells;
+ data->nvmem_config.ncells = ARRAY_SIZE(adm1266_nvmem_cells);
+ data->nvmem_config.priv = data;
+ data->nvmem_config.stride = 1;
+ data->nvmem_config.word_size = 1;
+ data->nvmem_config.size = 0x80000;
+
+ data->dev_mem = devm_kzalloc(&data->client->dev, data->nvmem_config.size, GFP_KERNEL);
+ if (!data->dev_mem)
+ return -ENOMEM;
+
+ data->nvmem = devm_nvmem_register(&data->client->dev, &data->nvmem_config);
+ if (IS_ERR(data->nvmem)) {
+ dev_err(&data->client->dev, "Could not register nvmem!");
+ return PTR_ERR(data->nvmem);
+ }
+
+ return 0;
+}
+#else
+static int adm1266_config_nvmem(struct adm1266_data *data)
+{
+ return 0;
+}
+#endif /* CONFIG_NVMEM */
+
+static int adm1266_set_rtc(struct adm1266_data *data)
+{
+ time64_t kt;
+ char write_buf[6];
+ int i;
+
+ kt = ktime_get_seconds();
+
+ memset(write_buf, 0, sizeof(write_buf));
+
+ for (i = 0; i < 4; i++)
+ write_buf[2 + i] = (kt >> (i * 8)) & 0xFF;
+
+ return i2c_smbus_write_block_data(data->client, ADM1266_SET_RTC, sizeof(write_buf),
+ write_buf);
+}
+
static int adm1266_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
struct adm1266_data *data;
@@ -344,6 +501,14 @@ static int adm1266_probe(struct i2c_client *client, const struct i2c_device_id *
if (ret < 0)
return ret;
+ ret = adm1266_set_rtc(data);
+ if (ret < 0)
+ return ret;
+
+ ret = adm1266_config_nvmem(data);
+ if (ret < 0)
+ return ret;
+
ret = pmbus_do_probe(client, id, &data->info);
if (ret)
return ret;
--
2.20.1
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v6 6/9] hwmon: pmbus: adm1266: Add group command support
2020-07-27 5:31 [PATCH v6 0/9] hwmon: pmbus: adm1266: add support alexandru.tachici
` (4 preceding siblings ...)
2020-07-27 5:31 ` [PATCH v6 5/9] hwmon: pmbus: adm1266: read blackbox alexandru.tachici
@ 2020-07-27 5:31 ` alexandru.tachici
2020-07-27 5:31 ` [PATCH v6 7/9] hwmon: pmbus: adm1266: program firmware alexandru.tachici
` (3 subsequent siblings)
9 siblings, 0 replies; 12+ messages in thread
From: alexandru.tachici @ 2020-07-27 5:31 UTC (permalink / raw)
To: linux-hwmon, linux-kernel, devicetree; +Cc: robh+dt, linux, Alexandru Tachici
From: Alexandru Tachici <alexandru.tachici@analog.com>
The Group Command Protocol is used to send commands
to more than one PMBus device. Some devices working
together require that they must execute some commands
all at once.
The commands are sent in one continuous transmission.
When the devices detect the STOP condition that ends
the sending of commands, they all begin executing
the command they received.
This patch adds support for the group command protocol.
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
---
drivers/hwmon/pmbus/adm1266.c | 50 +++++++++++++++++++++++++++++++++++
1 file changed, 50 insertions(+)
diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c
index c06465100320..34bd4e652729 100644
--- a/drivers/hwmon/pmbus/adm1266.c
+++ b/drivers/hwmon/pmbus/adm1266.c
@@ -73,6 +73,56 @@ static const struct nvmem_cell_info adm1266_nvmem_cells[] = {
DECLARE_CRC8_TABLE(pmbus_crc_table);
+/* PMBus Group command. */
+static int adm1266_pmbus_group_command(struct adm1266_data *data, struct i2c_client **clients,
+ u8 nr_clients, u8 cmd, u8 w_len, u8 *data_w)
+{
+ struct i2c_msg *msgs;
+ u8 addr;
+ int ret;
+ int i;
+
+ msgs = kcalloc(nr_clients, sizeof(struct i2c_msg), GFP_KERNEL);
+ if (!msgs)
+ return -ENOMEM;
+
+ for (i = 0; i < nr_clients; i++) {
+ msgs[i].addr = clients[i]->addr;
+ msgs[i].len = w_len + 1;
+
+ msgs[i].buf = kcalloc(ADM1266_PMBUS_BLOCK_MAX + 2, sizeof(u8), GFP_KERNEL);
+ if (!msgs[i].buf) {
+ ret = -ENOMEM;
+ goto cleanup;
+ }
+
+ msgs[i].buf[0] = cmd;
+ memcpy(&msgs[i].buf[1], data_w, w_len);
+
+ if (clients[i]->flags & I2C_CLIENT_PEC) {
+ u8 crc = 0;
+
+ addr = i2c_8bit_addr_from_msg(&msgs[i]);
+ crc = crc8(pmbus_crc_table, &addr, 1, crc);
+ crc = crc8(pmbus_crc_table, msgs[i].buf, msgs[i].len,
+ crc);
+
+ msgs[i].buf[msgs[i].len] = crc;
+ msgs[i].len++;
+ }
+ };
+
+ ret = i2c_transfer(data->client->adapter, msgs, nr_clients);
+
+cleanup:
+ for (i = i - 1; i >= 0; i--)
+ kfree(msgs[i].buf);
+
+ kfree(msgs);
+
+ return ret;
+}
+
/*
* Different from Block Read as it sends data and waits for the slave to
* return a value dependent on that data. The protocol is simply a Write Block
--
2.20.1
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v6 7/9] hwmon: pmbus: adm1266: program firmware
2020-07-27 5:31 [PATCH v6 0/9] hwmon: pmbus: adm1266: add support alexandru.tachici
` (5 preceding siblings ...)
2020-07-27 5:31 ` [PATCH v6 6/9] hwmon: pmbus: adm1266: Add group command support alexandru.tachici
@ 2020-07-27 5:31 ` alexandru.tachici
2020-07-27 5:31 ` [PATCH v6 8/9] hwmon: pmbus: adm1266: program configuration alexandru.tachici
` (2 subsequent siblings)
9 siblings, 0 replies; 12+ messages in thread
From: alexandru.tachici @ 2020-07-27 5:31 UTC (permalink / raw)
To: linux-hwmon, linux-kernel, devicetree; +Cc: robh+dt, linux, Alexandru Tachici
From: Alexandru Tachici <alexandru.tachici@analog.com>
Writing the firmware Intel hex file to the nvmem,
of the master adm1266, with offset 0, will now
trigger the firmware programming of all cascaded
devices simultaneously through pmbus.
During this process all adm1266 sequencers will be
stopped and at the end will be issued a hard reset
(see AN-1453 Programming the firmware).
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
---
drivers/hwmon/pmbus/adm1266.c | 501 +++++++++++++++++++++++++++++++++-
1 file changed, 500 insertions(+), 1 deletion(-)
diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c
index 34bd4e652729..376fc56abe04 100644
--- a/drivers/hwmon/pmbus/adm1266.c
+++ b/drivers/hwmon/pmbus/adm1266.c
@@ -9,6 +9,7 @@
#include <linux/bitfield.h>
#include <linux/crc8.h>
#include <linux/debugfs.h>
+#include <linux/delay.h>
#include <linux/gpio/driver.h>
#include <linux/i2c.h>
#include <linux/i2c-smbus.h>
@@ -18,18 +19,31 @@
#include <linux/nvmem-consumer.h>
#include <linux/nvmem-provider.h>
#include "pmbus.h"
+#include <linux/property.h>
#include <linux/slab.h>
#include <linux/timekeeping.h>
+#define ADM1266_STORE_USER_ALL 0x15
+#define ADM1266_STATUS_MFR 0x80
+#define ADM1266_IC_DEVICE_REV 0xAE
#define ADM1266_BLACKBOX_CONFIG 0xD3
#define ADM1266_PDIO_CONFIG 0xD4
+#define ADM1266_SEQUENCE_CONFIG 0xD6
+#define ADM1266_SYSTEM_CONFIG 0xD7
+#define ADM1266_GO_COMMAND 0xD8
#define ADM1266_READ_STATE 0xD9
#define ADM1266_READ_BLACKBOX 0xDE
#define ADM1266_SET_RTC 0xDF
+#define ADM1266_LOGIC_CONFIG 0xE0
#define ADM1266_GPIO_CONFIG 0xE1
+#define ADM1266_USER_DATA 0xE3
#define ADM1266_BLACKBOX_INFO 0xE6
#define ADM1266_PDIO_STATUS 0xE9
#define ADM1266_GPIO_STATUS 0xEA
+#define ADM1266_MEMORY_CONFIG 0xF8
+#define ADM1266_SWITCH_MEMORY 0xFA
+#define ADM1266_UPDATE_FW 0xFC
+#define ADM1266_FW_PASSWORD 0xFD
/* ADM1266 GPIO defines */
#define ADM1266_GPIO_NR 9
@@ -44,10 +58,35 @@
#define ADM1266_PDIO_GLITCH_FILT(x) FIELD_GET(GENMASK(12, 9), x)
#define ADM1266_PDIO_OUT_CFG(x) FIELD_GET(GENMASK(2, 0), x)
+/* ADM1266 FW_PASSWORD defines*/
+#define ADM1266_PASSWD_CMD_LEN 17
+#define ADM1266_CHANGE_PASSWORD 1
+#define ADM1266_UNLOCK_DEV 2
+#define ADM1266_LOCK_DEV 3
+
+/* ADM1266 STATUS_MFR defines */
+#define ADM1266_STATUS_PART_LOCKED(x) FIELD_GET(BIT(2), x)
+
+/* ADM1266 GO_COMMAND defines */
+#define ADM1266_GO_COMMAND_STOP BIT(0)
+#define ADM1266_GO_COMMAND_SEQ_RES BIT(1)
+#define ADM1266_GO_COMMAND_HARD_RES BIT(2)
+
+#define ADM1266_FIRMWARE_OFFSET 0x00000
+#define ADM1266_FIRMWARE_SIZE 131072
#define ADM1266_BLACKBOX_OFFSET 0x7F700
#define ADM1266_BLACKBOX_SIZE 64
#define ADM1266_PMBUS_BLOCK_MAX 255
+#define ADM1266_MAX_DEVICES 16
+
+static LIST_HEAD(registered_masters);
+static DEFINE_MUTEX(registered_masters_lock);
+
+struct adm1266_data_ref {
+ struct adm1266_data *data;
+ struct list_head list;
+};
struct adm1266_data {
struct pmbus_driver_info info;
@@ -57,6 +96,10 @@ struct adm1266_data {
struct dentry *debugfs_dir;
struct nvmem_config nvmem_config;
struct nvmem_device *nvmem;
+ bool master_dev;
+ struct list_head cascaded_devices_list;
+ struct mutex cascaded_devices_mutex; /* lock cascaded_devices_list */
+ u8 nr_devices;
u8 *dev_mem;
struct mutex buf_mutex;
u8 write_buf[ADM1266_PMBUS_BLOCK_MAX + 1] ____cacheline_aligned;
@@ -69,6 +112,11 @@ static const struct nvmem_cell_info adm1266_nvmem_cells[] = {
.offset = ADM1266_BLACKBOX_OFFSET,
.bytes = 2048,
},
+ {
+ .name = "firmware",
+ .offset = ADM1266_FIRMWARE_OFFSET,
+ .bytes = ADM1266_FIRMWARE_SIZE,
+ },
};
DECLARE_CRC8_TABLE(pmbus_crc_table);
@@ -123,6 +171,27 @@ static int adm1266_pmbus_group_command(struct adm1266_data *data, struct i2c_cli
return ret;
}
+static int adm1266_group_cmd(struct adm1266_data *data, u8 cmd, u8 *write_data, u8 w_len,
+ bool to_slaves)
+{
+ struct i2c_client *clients[ADM1266_MAX_DEVICES];
+ struct adm1266_data_ref *slave_ref;
+ int i = 0;
+
+ clients[i] = data->client;
+ i++;
+
+ if (!to_slaves)
+ return adm1266_pmbus_group_command(data, clients, 1, cmd, w_len, write_data);
+
+ list_for_each_entry(slave_ref, &data->cascaded_devices_list, list) {
+ clients[i] = slave_ref->data->client;
+ i++;
+ }
+
+ return adm1266_pmbus_group_command(data, clients, i, cmd, w_len, write_data);
+}
+
/*
* Different from Block Read as it sends data and waits for the slave to
* return a value dependent on that data. The protocol is simply a Write Block
@@ -449,6 +518,9 @@ static int adm1266_read_mem_cell(struct adm1266_data *data, const struct nvmem_c
if (ret)
dev_err(&data->client->dev, "Could not read blackbox!");
return ret;
+ case ADM1266_FIRMWARE_OFFSET:
+ /* firmware is write-only */
+ return 0;
default:
return -EINVAL;
}
@@ -477,14 +549,411 @@ static int adm1266_nvmem_read(void *priv, unsigned int offset, void *val,
return 0;
}
+static int adm1266_unlock_device(struct adm1266_data *data)
+{
+ struct i2c_client *client = data->client;
+ u8 passwd_cmd[ADM1266_PASSWD_CMD_LEN];
+ int reg_val;
+ int ret;
+ int i;
+
+ memset(passwd_cmd, 0xFF, ADM1266_PASSWD_CMD_LEN);
+ passwd_cmd[ADM1266_PASSWD_CMD_LEN - 1] = ADM1266_UNLOCK_DEV;
+
+ /* password needs to be written twice correctly*/
+ for (i = 0; i < 2; i++) {
+ ret = i2c_smbus_write_block_data(client, ADM1266_FW_PASSWORD,
+ ADM1266_PASSWD_CMD_LEN, passwd_cmd);
+ if (ret < 0) {
+ dev_err(&client->dev, "Could not write password.");
+ return ret;
+ }
+
+ /* 50 ms delay between subsequent password writes are needed*/
+ msleep(50);
+ }
+
+ /* check if device is unlocked */
+ reg_val = pmbus_read_byte_data(client, 0, ADM1266_STATUS_MFR);
+ if (reg_val < 0) {
+ dev_err(&client->dev, "Could not read status.");
+ return reg_val;
+ }
+ if (ADM1266_STATUS_PART_LOCKED(reg_val)) {
+ dev_err(&client->dev, "Device locked.");
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+static int adm1266_unlock_all_dev(struct adm1266_data *data)
+{
+ struct adm1266_data_ref *slave_ref;
+ int ret;
+
+ ret = adm1266_unlock_device(data);
+ if (ret < 0) {
+ dev_err(&data->client->dev, "Could not unlock master.");
+ return ret;
+ }
+
+ list_for_each_entry(slave_ref, &data->cascaded_devices_list, list) {
+ ret = adm1266_unlock_device(slave_ref->data);
+ if (ret < 0) {
+ dev_err(&data->client->dev, "Could not unlock slave addr: %d.",
+ slave_ref->data->client->addr);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int adm1266_lock_device(struct adm1266_data *data)
+{
+ struct i2c_client *client = data->client;
+ u8 passwd_cmd[ADM1266_PASSWD_CMD_LEN];
+ int reg_val;
+ int ret;
+
+ memset(passwd_cmd, 0, ADM1266_PASSWD_CMD_LEN);
+ passwd_cmd[ADM1266_PASSWD_CMD_LEN - 1] = ADM1266_LOCK_DEV;
+
+ ret = i2c_smbus_write_block_data(client, ADM1266_FW_PASSWORD, ADM1266_PASSWD_CMD_LEN,
+ passwd_cmd);
+ if (ret < 0)
+ return ret;
+
+ msleep(50);
+
+ /* check if device is now locked */
+ reg_val = pmbus_read_byte_data(client, 0, ADM1266_STATUS_MFR);
+ if (reg_val < 0)
+ return reg_val;
+
+ if (!ADM1266_STATUS_PART_LOCKED(reg_val))
+ return -EBUSY;
+
+ return 0;
+}
+
+static void adm1266_lock_all_dev(struct adm1266_data *data)
+{
+ struct adm1266_data_ref *slave_ref;
+ int ret;
+
+ ret = adm1266_lock_device(data);
+ if (ret < 0)
+ dev_warn(&data->client->dev, "Could not lock dev: %s.",
+ dev_name(&data->client->dev));
+
+ list_for_each_entry(slave_ref, &data->cascaded_devices_list, list) {
+ ret = adm1266_lock_device(slave_ref->data);
+ if (ret < 0)
+ dev_warn(&slave_ref->data->client->dev, "Could not lock dev: %s.",
+ dev_name(&slave_ref->data->client->dev));
+ }
+}
+
+static const int write_delays[][3] = {
+ {ADM1266_SYSTEM_CONFIG, 400, 1},
+ {ADM1266_USER_DATA, 100, 1},
+ {ADM1266_LOGIC_CONFIG, 200, 1},
+ {ADM1266_SEQUENCE_CONFIG, 2500, 1},
+ {ADM1266_UPDATE_FW, 2000, 1},
+ {ADM1266_MEMORY_CONFIG, 100, 0},
+ {ADM1266_STORE_USER_ALL, 300, 0},
+};
+
+static int adm1266_write_hex(struct adm1266_data *data,
+ unsigned int offset, unsigned int size)
+{
+ const u8 *ending_str = ":00000001FF";
+ u8 *hex_cmd = data->dev_mem + offset;
+ u8 *fw_end = data->dev_mem + offset + size;
+ unsigned int write_delay;
+ u8 write_buf[ADM1266_PMBUS_BLOCK_MAX + 1];
+ u8 first_writes[7];
+ u8 byte_count;
+ u8 reg_address;
+ int ret;
+ int i;
+
+ memset(first_writes, 1, 7);
+
+ while (hex_cmd < fw_end) {
+ hex_cmd = strnchr(hex_cmd, size, ':');
+
+ if (!hex_cmd || hex_cmd >= fw_end) {
+ dev_err(&data->client->dev, "Firmware ending missing.");
+ return -EINVAL;
+ }
+
+ if (!strncmp(hex_cmd, ending_str, strlen(ending_str)))
+ break;
+
+ hex_cmd++;
+
+ ret = hex2bin(&byte_count, hex_cmd, 1);
+ if (ret < 0)
+ return ret;
+
+ ret = hex2bin(®_address, hex_cmd + 4, 1);
+ if (ret < 0)
+ return ret;
+
+ ret = hex2bin(write_buf, hex_cmd + 8, byte_count);
+ if (ret < 0)
+ return ret;
+
+ ret = adm1266_group_cmd(data, reg_address, write_buf, byte_count, true);
+ if (ret < 0) {
+ dev_err(&data->client->dev, "Firmware write error: %d.", ret);
+ return ret;
+ }
+
+ /* write to eeprom with specified delays */
+ write_delay = 40;
+ for (i = 0; i < 7; i++) {
+ if (reg_address == write_delays[i][0]) {
+ if (write_delays[i][2] && first_writes[i]) {
+ first_writes[i] = 0;
+ write_delay = write_delays[i][1];
+ }
+
+ if (!write_delays[i][2])
+ write_delay = write_delays[i][1];
+ }
+ }
+ msleep(write_delay);
+ }
+
+ return 0;
+}
+
+static int adm1266_program_firmware(struct adm1266_data *data)
+{
+ u8 write_data[3];
+ int ret;
+
+ write_data[0] = ADM1266_GO_COMMAND_STOP | ADM1266_GO_COMMAND_SEQ_RES;
+ write_data[1] = 0x0;
+ ret = adm1266_group_cmd(data, ADM1266_GO_COMMAND, write_data, 2, true);
+ if (ret < 0) {
+ dev_err(&data->client->dev, "Could not stop all devs.");
+ return ret;
+ }
+
+ /* after issuing a stop command, wait 100 ms */
+ msleep(100);
+
+ ret = adm1266_unlock_all_dev(data);
+ if (ret < 0)
+ goto lock_all_devices;
+
+ write_data[0] = 0x2;
+ write_data[1] = 0x0;
+ write_data[2] = 0x0;
+ ret = adm1266_group_cmd(data, ADM1266_UPDATE_FW, write_data, 3, true);
+ if (ret < 0) {
+ dev_err(&data->client->dev, "Could not set bootloader mode.");
+ goto lock_all_devices;
+ }
+
+ /* wait for adm1266 to enter bootloader mode */
+ msleep(2000);
+
+ ret = adm1266_write_hex(data, ADM1266_FIRMWARE_OFFSET,
+ ADM1266_FIRMWARE_SIZE);
+ if (ret < 0) {
+ dev_err(&data->client->dev, "Could not write hex.");
+ goto lock_all_devices;
+ }
+
+ write_data[0] = ADM1266_GO_COMMAND_HARD_RES;
+ ret = adm1266_group_cmd(data, ADM1266_GO_COMMAND, write_data, 2, true);
+ if (ret < 0) {
+ dev_err(&data->client->dev, "Could not reset all devs.");
+ goto lock_all_devices;
+ }
+
+lock_all_devices:
+ adm1266_lock_all_dev(data);
+
+ return ret;
+}
+
+/* check if firmware/config write has ended */
+static bool adm1266_check_ending(struct adm1266_data *data, unsigned int offset,
+ unsigned int size)
+{
+ const u8 *ending_str = ":00000001FF";
+ u8 *hex_cmd = data->dev_mem + offset;
+ u8 *fw_end = data->dev_mem + offset + size;
+
+ hex_cmd = strnchr(hex_cmd, size, ':');
+ for (; hex_cmd && hex_cmd < fw_end;
+ hex_cmd = strnchr(hex_cmd, size, ':')) {
+ if (!strncmp(hex_cmd, ending_str, strlen(ending_str)))
+ return true;
+
+ hex_cmd++;
+ }
+
+ return false;
+}
+
+static int adm1266_write_mem_cell(struct adm1266_data *data,
+ const struct nvmem_cell_info *mem_cell,
+ unsigned int offset,
+ u8 *val,
+ size_t bytes)
+{
+ unsigned int cell_end = mem_cell->offset + mem_cell->bytes;
+ unsigned int cell_start = mem_cell->offset;
+ int (*program_func)(struct adm1266_data *data);
+ bool fw_writen;
+
+ switch (mem_cell->offset) {
+ case ADM1266_FIRMWARE_OFFSET:
+ if (!data->master_dev) {
+ dev_err(&data->client->dev,
+ "Only master programs the firmware.");
+ return -EINVAL;
+ }
+
+ program_func = &adm1266_program_firmware;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (offset < cell_start || offset + bytes >= cell_end)
+ return -EINVAL;
+
+ if (offset == mem_cell->offset)
+ memset(data->dev_mem + mem_cell->offset, 0, mem_cell->bytes);
+
+ memcpy(data->dev_mem + offset, val, bytes);
+
+ fw_writen = adm1266_check_ending(data, mem_cell->offset,
+ mem_cell->bytes);
+
+ if (fw_writen)
+ return program_func(data);
+
+ return 0;
+}
+
+static int adm1266_nvmem_write(void *priv, unsigned int offset, void *val,
+ size_t bytes)
+{
+ const struct nvmem_cell_info *mem_cell;
+ struct adm1266_data *data = priv;
+ int ret;
+ int i;
+
+ for (i = 0; i < data->nvmem_config.ncells; i++) {
+ mem_cell = &adm1266_nvmem_cells[i];
+
+ if (!adm1266_cell_is_accessed(mem_cell, offset, bytes))
+ continue;
+
+ ret = adm1266_write_mem_cell(data, mem_cell, offset,
+ val, bytes);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int adm1266_register_slave(struct adm1266_data *slave,
+ struct adm1266_data *master)
+{
+ struct adm1266_data_ref *slave_ref;
+
+ slave_ref = devm_kzalloc(&slave->client->dev,
+ sizeof(*slave_ref), GFP_KERNEL);
+ if (!slave_ref)
+ return -ENOMEM;
+
+ slave_ref->data = slave;
+ INIT_LIST_HEAD(&slave_ref->list);
+
+ mutex_lock(&master->cascaded_devices_mutex);
+ list_add_tail(&slave_ref->list, &master->cascaded_devices_list);
+ mutex_unlock(&master->cascaded_devices_mutex);
+
+ return 0;
+}
+
+static int adm1266_register(struct adm1266_data *data)
+{
+ struct fwnode_reference_args master_fwnode_ref;
+ const struct fwnode_handle *fw;
+ const struct fwnode_handle *master_fw;
+ struct adm1266_data_ref *master_ref;
+ int ret;
+
+ fw = dev_fwnode(&data->client->dev);
+ INIT_LIST_HEAD(&data->cascaded_devices_list);
+
+ /* master devices do not have this property */
+ if (!fwnode_property_present(fw, "adi,master-adm1266")) {
+ data->master_dev = true;
+
+ master_ref = devm_kzalloc(&data->client->dev,
+ sizeof(*master_ref), GFP_KERNEL);
+ if (!master_ref)
+ return -ENOMEM;
+
+ master_ref->data = data;
+ INIT_LIST_HEAD(&master_ref->list);
+
+ mutex_lock(®istered_masters_lock);
+ list_add(&master_ref->list, ®istered_masters);
+ mutex_unlock(®istered_masters_lock);
+ }
+
+ if (data->master_dev)
+ return 0;
+
+ ret = fwnode_property_get_reference_args(fw, "adi,master-adm1266",
+ NULL, 0, 0,
+ &master_fwnode_ref);
+ if (ret < 0) {
+ dev_err(&data->client->dev,
+ "Could not read adi,master-adm1266 property");
+ return ret;
+ }
+
+ mutex_lock(®istered_masters_lock);
+
+ /* search for the corresponding master of this slave */
+ list_for_each_entry(master_ref, ®istered_masters, list) {
+ master_fw = dev_fwnode(&master_ref->data->client->dev);
+
+ if (master_fw == master_fwnode_ref.fwnode) {
+ mutex_unlock(®istered_masters_lock);
+ return adm1266_register_slave(data, master_ref->data);
+ }
+ }
+
+ mutex_unlock(®istered_masters_lock);
+
+ return -EPROBE_DEFER;
+}
+
static int adm1266_config_nvmem(struct adm1266_data *data)
{
data->nvmem_config.name = dev_name(&data->client->dev);
data->nvmem_config.dev = &data->client->dev;
data->nvmem_config.root_only = true;
- data->nvmem_config.read_only = true;
data->nvmem_config.owner = THIS_MODULE;
data->nvmem_config.reg_read = adm1266_nvmem_read;
+ data->nvmem_config.reg_write = adm1266_nvmem_write;
data->nvmem_config.cells = adm1266_nvmem_cells;
data->nvmem_config.ncells = ARRAY_SIZE(adm1266_nvmem_cells);
data->nvmem_config.priv = data;
@@ -528,6 +997,21 @@ static int adm1266_set_rtc(struct adm1266_data *data)
write_buf);
}
+static int adm1266_firmware_present(struct i2c_client *client)
+{
+ u8 read_buf[I2C_SMBUS_BLOCK_MAX];
+ int ret;
+
+ ret = i2c_smbus_read_i2c_block_data(client, ADM1266_IC_DEVICE_REV,
+ 8, read_buf);
+ if (ret < 0) {
+ dev_err(&client->dev, "Could not read firmware revision.");
+ return ret;
+ }
+
+ return !!(read_buf[0] | read_buf[1] | read_buf[2]);
+}
+
static int adm1266_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
struct adm1266_data *data;
@@ -546,6 +1030,21 @@ static int adm1266_probe(struct i2c_client *client, const struct i2c_device_id *
crc8_populate_msb(pmbus_crc_table, 0x7);
mutex_init(&data->buf_mutex);
+ mutex_init(&data->cascaded_devices_mutex);
+
+ ret = adm1266_register(data);
+ if (ret < 0)
+ return ret;
+
+ ret = adm1266_firmware_present(client);
+ if (ret < 0)
+ return ret;
+
+ if (!ret) {
+ dev_notice(&client->dev, "Chip firmware not written.");
+ return adm1266_config_nvmem(data);
+ }
+
ret = adm1266_config_gpio(data);
if (ret < 0)
--
2.20.1
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v6 8/9] hwmon: pmbus: adm1266: program configuration
2020-07-27 5:31 [PATCH v6 0/9] hwmon: pmbus: adm1266: add support alexandru.tachici
` (6 preceding siblings ...)
2020-07-27 5:31 ` [PATCH v6 7/9] hwmon: pmbus: adm1266: program firmware alexandru.tachici
@ 2020-07-27 5:31 ` alexandru.tachici
2020-07-27 5:31 ` [PATCH v6 9/9] dt-bindings: hwmon: Add bindings for ADM1266 alexandru.tachici
2020-07-27 14:10 ` [PATCH v6 0/9] hwmon: pmbus: adm1266: add support Guenter Roeck
9 siblings, 0 replies; 12+ messages in thread
From: alexandru.tachici @ 2020-07-27 5:31 UTC (permalink / raw)
To: linux-hwmon, linux-kernel, devicetree; +Cc: robh+dt, linux, Alexandru Tachici
From: Alexandru Tachici <alexandru.tachici@analog.com>
Writing the configuration Intel hex file to the nvmem,
of an adm1266, with offset 0x30000, will now
trigger the configuration programming.
During this process the adm1266 sequencer will be
stopped and at the end will be issued a seq reset
(see AN-1453 Programming the configuration).
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
---
drivers/hwmon/pmbus/adm1266.c | 179 +++++++++++++++++++++++++++++++++-
1 file changed, 178 insertions(+), 1 deletion(-)
diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c
index 376fc56abe04..2b07e38041da 100644
--- a/drivers/hwmon/pmbus/adm1266.c
+++ b/drivers/hwmon/pmbus/adm1266.c
@@ -40,7 +40,10 @@
#define ADM1266_BLACKBOX_INFO 0xE6
#define ADM1266_PDIO_STATUS 0xE9
#define ADM1266_GPIO_STATUS 0xEA
+#define ADM1266_STATUS_MFR_2 0xED
+#define ADM1266_REFRESH_FLASH 0xF5
#define ADM1266_MEMORY_CONFIG 0xF8
+#define ADM1266_MEMORY_CRC 0xF9
#define ADM1266_SWITCH_MEMORY 0xFA
#define ADM1266_UPDATE_FW 0xFC
#define ADM1266_FW_PASSWORD 0xFD
@@ -66,6 +69,11 @@
/* ADM1266 STATUS_MFR defines */
#define ADM1266_STATUS_PART_LOCKED(x) FIELD_GET(BIT(2), x)
+#define ADM1266_RUNNING_REFRESH(x) FIELD_GET(BIT(3), x)
+#define ADM1266_ALL_CRC_FAULT(x) FIELD_GET(BIT(5), x)
+
+/* ADM1266 STATUS_MFR_2 defines */
+#define ADM1266_MAIN_CONFIG_FAULT(x) FIELD_GET(GENMASK(9, 8), x)
/* ADM1266 GO_COMMAND defines */
#define ADM1266_GO_COMMAND_STOP BIT(0)
@@ -74,6 +82,8 @@
#define ADM1266_FIRMWARE_OFFSET 0x00000
#define ADM1266_FIRMWARE_SIZE 131072
+#define ADM1266_CONFIG_OFFSET 0x30000
+#define ADM1266_CONFIG_SIZE 131072
#define ADM1266_BLACKBOX_OFFSET 0x7F700
#define ADM1266_BLACKBOX_SIZE 64
@@ -117,6 +127,11 @@ static const struct nvmem_cell_info adm1266_nvmem_cells[] = {
.offset = ADM1266_FIRMWARE_OFFSET,
.bytes = ADM1266_FIRMWARE_SIZE,
},
+ {
+ .name = "configuration",
+ .offset = ADM1266_CONFIG_OFFSET,
+ .bytes = ADM1266_CONFIG_SIZE,
+ },
};
DECLARE_CRC8_TABLE(pmbus_crc_table);
@@ -521,6 +536,9 @@ static int adm1266_read_mem_cell(struct adm1266_data *data, const struct nvmem_c
case ADM1266_FIRMWARE_OFFSET:
/* firmware is write-only */
return 0;
+ case ADM1266_CONFIG_OFFSET:
+ /* configuration is write-only */
+ return 0;
default:
return -EINVAL;
}
@@ -677,6 +695,7 @@ static int adm1266_write_hex(struct adm1266_data *data,
u8 first_writes[7];
u8 byte_count;
u8 reg_address;
+ bool to_slaves = false;
int ret;
int i;
@@ -707,7 +726,10 @@ static int adm1266_write_hex(struct adm1266_data *data,
if (ret < 0)
return ret;
- ret = adm1266_group_cmd(data, reg_address, write_buf, byte_count, true);
+ if (offset == ADM1266_FIRMWARE_OFFSET)
+ to_slaves = true;
+
+ ret = adm1266_group_cmd(data, reg_address, write_buf, byte_count, to_slaves);
if (ret < 0) {
dev_err(&data->client->dev, "Firmware write error: %d.", ret);
return ret;
@@ -732,6 +754,87 @@ static int adm1266_write_hex(struct adm1266_data *data,
return 0;
}
+static int adm1266_verify_memory(struct adm1266_data *data)
+{
+ char cmd[2];
+ int ret;
+ int reg;
+
+ cmd[0] = 0x1;
+ cmd[1] = 0x0;
+ ret = adm1266_group_cmd(data, ADM1266_MEMORY_CRC, cmd,
+ sizeof(cmd), true);
+ if (ret < 0)
+ return ret;
+
+ /* after issuing a memory recalculate crc command, wait 1000 ms */
+ msleep(1000);
+
+ reg = pmbus_read_word_data(data->client, 0, 0xFF, ADM1266_STATUS_MFR_2);
+ if (reg < 0)
+ return reg;
+
+ if (ADM1266_MAIN_CONFIG_FAULT(reg)) {
+ dev_err(&data->client->dev, "Main memory corrupted.");
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+static int adm1266_refresh_memory(struct adm1266_data *data)
+{
+ unsigned int timeout = 9000;
+ int ret;
+ u8 cmd[2];
+
+ cmd[0] = 0x2;
+ ret = adm1266_group_cmd(data, ADM1266_REFRESH_FLASH, cmd, 1, true);
+ if (ret < 0) {
+ dev_err(&data->client->dev, "Could not refresh flash.");
+ return ret;
+ }
+
+ /* after issuing a refresh flash command, wait 9000 ms */
+ msleep(9000);
+
+ do {
+ msleep(1000);
+ timeout -= 1000;
+
+ ret = pmbus_read_byte_data(data->client, 0, ADM1266_STATUS_MFR);
+ if (ret < 0) {
+ dev_err(&data->client->dev, "Could not read status.");
+ return ret;
+ }
+
+ } while (ADM1266_RUNNING_REFRESH(ret) && timeout > 0);
+
+ if (timeout == 0)
+ return -ETIMEDOUT;
+
+ cmd[0] = 0x1;
+ cmd[1] = 0x0;
+ ret = adm1266_group_cmd(data, ADM1266_MEMORY_CRC, cmd,
+ sizeof(cmd), true);
+ if (ret < 0)
+ return ret;
+
+ /* after issuing a memory recalculate crc command, wait 1000 ms */
+ msleep(1000);
+
+ ret = pmbus_read_byte_data(data->client, 0, ADM1266_STATUS_MFR);
+ if (ret < 0)
+ return ret;
+
+ if (ADM1266_ALL_CRC_FAULT(ret)) {
+ dev_err(&data->client->dev, "CRC checks failed.");
+ return ret;
+ }
+
+ return 0;
+}
+
static int adm1266_program_firmware(struct adm1266_data *data)
{
u8 write_data[3];
@@ -784,6 +887,77 @@ static int adm1266_program_firmware(struct adm1266_data *data)
return ret;
}
+static int adm1266_program_config(struct adm1266_data *data)
+{
+ u8 cmd[2];
+ u8 value;
+ int ret;
+
+ value = ADM1266_GO_COMMAND_STOP | ADM1266_GO_COMMAND_SEQ_RES;
+ ret = pmbus_write_word_data(data->client, 0, ADM1266_GO_COMMAND, value);
+ if (ret < 0) {
+ dev_err(&data->client->dev, "Could not stop sequence.");
+ return ret;
+ }
+
+ /* after issuing a stop command, wait 100 ms */
+ msleep(100);
+
+ ret = adm1266_unlock_all_dev(data);
+ if (ret < 0) {
+ dev_err(&data->client->dev, "Could not unlock dev.");
+ goto lock_all_devices;
+ }
+
+ value = 0;
+ ret = i2c_smbus_write_block_data(data->client, ADM1266_SWITCH_MEMORY, 1, &value);
+ if (ret < 0) {
+ dev_err(&data->client->dev, "Could not switch to main mem.");
+ goto lock_all_devices;
+ }
+
+ /* after issuing a SWITCH_MEMORY command, wait 1000 ms */
+ msleep(1000);
+
+ ret = adm1266_write_hex(data, ADM1266_CONFIG_OFFSET, ADM1266_CONFIG_SIZE);
+ if (ret < 0) {
+ dev_err(&data->client->dev, "Could not write configuration.");
+ goto lock_all_devices;
+ }
+
+ ret = pmbus_write_byte(data->client, 0, ADM1266_STORE_USER_ALL);
+ if (ret < 0)
+ return ret;
+
+ /* after issuing a STORE_USER_ALL command, wait 300 ms */
+ msleep(300);
+
+ if (!data->master_dev)
+ goto lock_all_devices;
+
+ ret = adm1266_verify_memory(data);
+ if (ret < 0)
+ goto lock_all_devices;
+
+ cmd[0] = 0;
+ cmd[1] = 0;
+ ret = adm1266_group_cmd(data, ADM1266_GO_COMMAND, cmd, sizeof(cmd), true);
+ if (ret < 0) {
+ dev_err(&data->client->dev, "Could not restart sequence.");
+ goto lock_all_devices;
+ }
+
+ /* after issuing a restart sequence command, wait 350 ms */
+ msleep(350);
+
+ ret = adm1266_refresh_memory(data);
+
+lock_all_devices:
+ adm1266_lock_all_dev(data);
+
+ return ret;
+}
+
/* check if firmware/config write has ended */
static bool adm1266_check_ending(struct adm1266_data *data, unsigned int offset,
unsigned int size)
@@ -825,6 +999,9 @@ static int adm1266_write_mem_cell(struct adm1266_data *data,
program_func = &adm1266_program_firmware;
break;
+ case ADM1266_CONFIG_OFFSET:
+ program_func = &adm1266_program_config;
+ break;
default:
return -EINVAL;
}
--
2.20.1
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v6 9/9] dt-bindings: hwmon: Add bindings for ADM1266
2020-07-27 5:31 [PATCH v6 0/9] hwmon: pmbus: adm1266: add support alexandru.tachici
` (7 preceding siblings ...)
2020-07-27 5:31 ` [PATCH v6 8/9] hwmon: pmbus: adm1266: program configuration alexandru.tachici
@ 2020-07-27 5:31 ` alexandru.tachici
2020-07-27 14:10 ` [PATCH v6 0/9] hwmon: pmbus: adm1266: add support Guenter Roeck
9 siblings, 0 replies; 12+ messages in thread
From: alexandru.tachici @ 2020-07-27 5:31 UTC (permalink / raw)
To: linux-hwmon, linux-kernel, devicetree; +Cc: robh+dt, linux, Alexandru Tachici
From: Alexandru Tachici <alexandru.tachici@analog.com>
Add bindings for the Analog Devices ADM1266 sequencer.
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
---
.../bindings/hwmon/adi,adm1266.yaml | 56 +++++++++++++++++++
1 file changed, 56 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml
diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml
new file mode 100644
index 000000000000..ad92686e2ee6
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/adi,adm1266.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADM1266 Cascadable Super Sequencer with Margin
+ Control and Fault Recording
+
+maintainers:
+ - Alexandru Tachici <alexandru.tachici@analog.com>
+
+description: |
+ Analog Devices ADM1266 Cascadable Super Sequencer with Margin
+ Control and Fault Recording.
+ https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1266.pdf
+
+properties:
+ compatible:
+ enum:
+ - adi,adm1266
+
+ reg:
+ description: |
+ I2C address of slave device.
+ items:
+ minimum: 0x40
+ maximum: 0x4F
+
+ avcc-supply:
+ description: |
+ Phandle to the Avcc power supply.
+
+ adi,master-adm1266:
+ description: |
+ Represents phandle of a master ADM1266 device cascaded through the IDB.
+ $ref: "/schemas/types.yaml#/definitions/phandle"
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adm1266@40 {
+ compatible = "adi,adm1266";
+ reg = <0x40>;
+ };
+ };
+...
--
2.20.1
^ permalink raw reply related [flat|nested] 12+ messages in thread* Re: [PATCH v6 0/9] hwmon: pmbus: adm1266: add support
2020-07-27 5:31 [PATCH v6 0/9] hwmon: pmbus: adm1266: add support alexandru.tachici
` (8 preceding siblings ...)
2020-07-27 5:31 ` [PATCH v6 9/9] dt-bindings: hwmon: Add bindings for ADM1266 alexandru.tachici
@ 2020-07-27 14:10 ` Guenter Roeck
9 siblings, 0 replies; 12+ messages in thread
From: Guenter Roeck @ 2020-07-27 14:10 UTC (permalink / raw)
To: alexandru.tachici, linux-hwmon, linux-kernel, devicetree; +Cc: robh+dt
On 7/26/20 10:31 PM, alexandru.tachici@analog.com wrote:
> From: Alexandru Tachici <alexandru.tachici@analog.com>
>
> Add PMBus probing driver for the adm1266 Cascadable
> Super Sequencer with Margin Control and Fault Recording.
> Driver is using the pmbus_core, creating sysfs files
> under hwmon for inputs: vh1->vh4 and vp1->vp13.
>
What happened to change logs ? Do you really expect me
to go through the history of this series to figure out
what changed from and in previous revisions of this
patch set ?
Guenter
> 1. Add PMBus probing driver for inputs vh1->vh4
> and vp1->vp13.
>
> 2. Add Block Write-Read Process Call command.
> A PMBus specific implementation was required because
> block write with I2C_SMBUS_PROC_CALL flag allows a
> maximum of 32 bytes to be received.
>
> 3. This makes adm1266 driver expose GPIOs
> to user-space. Currently are read only. Future
> developments on the firmware will allow
> them to be writable.
>
> 4. Allow the current sate of the seqeuncer to be read
> through debugfs.
>
> 5. Blackboxes are 64 bytes of chip state related data
> that is generated on faults. Use the nvmem kernel api
> to expose the blackbox chip functionality to userspace.
>
> 6. Add group command support. This will allow the driver
> to stop/program all cascaded adm1266 devices at once.
>
> 7. Writing the firmware hex file with offset 0
> to the nvmem of the master adm1266 will trigger
> the firmware programming of all cascaded devices.
> The master adm1266 of each device is specified in
> the devicetree.
>
> 8. Writing the configuration hex file to 0x30000
> byte address of the nvmem file will trigger the
> programing of that device in particular.
>
> 9. dt bindings for ADM1266.
>
> Alexandru Tachici (9):
> hwmon: pmbus: adm1266: add support
> hwmon: pmbus: adm1266: Add Block process call
> hwmon: pmbus: adm1266: Add support for GPIOs
> hwmon: pmbus: adm1266: add debugfs for states
> hwmon: pmbus: adm1266: read blackbox
> hwmon: pmbus: adm1266: Add group command support
> hwmon: pmbus: adm1266: program firmware
> hwmon: pmbus: adm1266: program configuration
> dt-bindings: hwmon: Add bindings for ADM1266
>
> .../bindings/hwmon/adi,adm1266.yaml | 56 +
> Documentation/hwmon/adm1266.rst | 37 +
> Documentation/hwmon/index.rst | 1 +
> drivers/hwmon/pmbus/Kconfig | 10 +
> drivers/hwmon/pmbus/Makefile | 1 +
> drivers/hwmon/pmbus/adm1266.c | 1273 +++++++++++++++++
> 6 files changed, 1378 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml
> create mode 100644 Documentation/hwmon/adm1266.rst
> create mode 100644 drivers/hwmon/pmbus/adm1266.c
>
^ permalink raw reply [flat|nested] 12+ messages in thread