From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
To: Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>,
Rob Herring <robh+dt@kernel.org>,
linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Subject: [PATCH] dt-bindings: hwmon: lm90: convert to dtschema
Date: Mon, 20 Sep 2021 16:05:25 +0200 [thread overview]
Message-ID: <20210920140525.157013-1-krzysztof.kozlowski@canonical.com> (raw)
Convert the National LM90 hwmon sensor bindings to DT schema format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
.../devicetree/bindings/hwmon/lm90.txt | 51 ------------
.../bindings/hwmon/national,lm90.yaml | 79 +++++++++++++++++++
MAINTAINERS | 2 +-
3 files changed, 80 insertions(+), 52 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/hwmon/lm90.txt
create mode 100644 Documentation/devicetree/bindings/hwmon/national,lm90.yaml
diff --git a/Documentation/devicetree/bindings/hwmon/lm90.txt b/Documentation/devicetree/bindings/hwmon/lm90.txt
deleted file mode 100644
index 398dcb965751..000000000000
--- a/Documentation/devicetree/bindings/hwmon/lm90.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-* LM90 series thermometer.
-
-Required node properties:
-- compatible: manufacturer and chip name, one of
- "adi,adm1032"
- "adi,adt7461"
- "adi,adt7461a"
- "gmt,g781"
- "national,lm90"
- "national,lm86"
- "national,lm89"
- "national,lm99"
- "dallas,max6646"
- "dallas,max6647"
- "dallas,max6649"
- "dallas,max6657"
- "dallas,max6658"
- "dallas,max6659"
- "dallas,max6680"
- "dallas,max6681"
- "dallas,max6695"
- "dallas,max6696"
- "onnn,nct1008"
- "winbond,w83l771"
- "nxp,sa56004"
- "ti,tmp451"
-
-- reg: I2C bus address of the device
-
-- vcc-supply: vcc regulator for the supply voltage.
-
-Optional properties:
-- interrupts: Contains a single interrupt specifier which describes the
- LM90 "-ALERT" pin output.
- See interrupt-controller/interrupts.txt for the format.
-
-- #thermal-sensor-cells: should be set to 1. See thermal/thermal-sensor.yaml
- for details. See <include/dt-bindings/thermal/lm90.h> for the
- definition of the local, remote and 2nd remote sensor index
- constants.
-
-Example LM90 node:
-
-temp-sensor {
- compatible = "onnn,nct1008";
- reg = <0x4c>;
- vcc-supply = <&palmas_ldo6_reg>;
- interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>;
- #thermal-sensor-cells = <1>;
-}
diff --git a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml
new file mode 100644
index 000000000000..e712117da3df
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/national,lm90.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LM90 series thermometer
+
+maintainers:
+ - Jean Delvare <jdelvare@suse.com>
+ - Guenter Roeck <linux@roeck-us.net>
+
+properties:
+ compatible:
+ enum:
+ - adi,adm1032
+ - adi,adt7461
+ - adi,adt7461a
+ - dallas,max6646
+ - dallas,max6647
+ - dallas,max6649
+ - dallas,max6657
+ - dallas,max6658
+ - dallas,max6659
+ - dallas,max6680
+ - dallas,max6681
+ - dallas,max6695
+ - dallas,max6696
+ - gmt,g781
+ - national,lm86
+ - national,lm89
+ - national,lm90
+ - national,lm99
+ - nxp,sa56004
+ - onnn,nct1008
+ - ti,tmp451
+ - winbond,w83l771
+
+
+ interrupts:
+ items:
+ - description: |
+ Single interrupt specifier which describes the LM90 "-ALERT" pin
+ output.
+
+ reg:
+ maxItems: 1
+
+ "#thermal-sensor-cells":
+ const: 1
+
+ vcc-supply:
+ description: phandle to the regulator that provides the +VCC supply
+
+required:
+ - compatible
+ - reg
+ - vcc-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/tegra-gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sensor@4c {
+ compatible = "onnn,nct1008";
+ reg = <0x4c>;
+ vcc-supply = <&palmas_ldo6_reg>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>;
+ #thermal-sensor-cells = <1>;
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 2b990794ec35..b07679009af2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10928,7 +10928,7 @@ LM90 HARDWARE MONITOR DRIVER
M: Jean Delvare <jdelvare@suse.com>
L: linux-hwmon@vger.kernel.org
S: Maintained
-F: Documentation/devicetree/bindings/hwmon/lm90.txt
+F: Documentation/devicetree/bindings/hwmon/national,lm90.yaml
F: Documentation/hwmon/lm90.rst
F: drivers/hwmon/lm90.c
F: include/dt-bindings/thermal/lm90.h
--
2.30.2
next reply other threads:[~2021-09-20 14:05 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-20 14:05 Krzysztof Kozlowski [this message]
2021-09-20 17:22 ` [PATCH] dt-bindings: hwmon: lm90: convert to dtschema Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210920140525.157013-1-krzysztof.kozlowski@canonical.com \
--to=krzysztof.kozlowski@canonical.com \
--cc=devicetree@vger.kernel.org \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).