* [PATCH v3 0/2] drivers: rtc: add max313xx series rtc driver
@ 2022-11-08 12:22 Ibrahim Tilki
2022-11-08 12:22 ` [PATCH v3 1/2] " Ibrahim Tilki
2022-11-08 12:22 ` [PATCH v3 2/2] dt-bindings: rtc: add max313xx RTCs Ibrahim Tilki
0 siblings, 2 replies; 14+ messages in thread
From: Ibrahim Tilki @ 2022-11-08 12:22 UTC (permalink / raw)
To: a.zummo, alexandre.belloni, jdelvare, linux, robh+dt,
krzysztof.kozlowski+dt
Cc: Ibrahim Tilki, linux-rtc, linux-kernel, linux-hwmon, devicetree
Hi,
Sending v3 to fix a warning reported by kernel test robot.
Also added reviewed-by tag for Krzysztof since dt-bindings patch
has not been modified.
Best regards,
Ibrahim
changelog:
since v3:
- add "break" to fix warning: unannotated fall-through
Reported-by: kernel test robot <lkp@intel.com>
since v2:
- dtbinding: update title and description
- dtbinding: remove last example
- drop watchdog support
- support reading 12Hr format instead of forcing 24hr at probe time
- use "tm_year % 100" instead of range check
- refactor max313xx_init for readability
Ibrahim Tilki (2):
drivers: rtc: add max313xx series rtc driver
dt-bindings: rtc: add max313xx RTCs
.../devicetree/bindings/rtc/adi,max313xx.yaml | 151 +++
drivers/rtc/Kconfig | 11 +
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-max313xx.c | 1070 +++++++++++++++++
4 files changed, 1233 insertions(+)
create mode 100644 Documentation/devicetree/bindings/rtc/adi,max313xx.yaml
create mode 100644 drivers/rtc/rtc-max313xx.c
--
2.25.1
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v3 1/2] drivers: rtc: add max313xx series rtc driver
2022-11-08 12:22 [PATCH v3 0/2] drivers: rtc: add max313xx series rtc driver Ibrahim Tilki
@ 2022-11-08 12:22 ` Ibrahim Tilki
2022-11-08 12:57 ` Christophe JAILLET
` (3 more replies)
2022-11-08 12:22 ` [PATCH v3 2/2] dt-bindings: rtc: add max313xx RTCs Ibrahim Tilki
1 sibling, 4 replies; 14+ messages in thread
From: Ibrahim Tilki @ 2022-11-08 12:22 UTC (permalink / raw)
To: a.zummo, alexandre.belloni, jdelvare, linux, robh+dt,
krzysztof.kozlowski+dt
Cc: Ibrahim Tilki, linux-rtc, linux-kernel, linux-hwmon, devicetree,
Zeynep Arslanbenzer
Adding support for Analog Devices MAX313XX series RTCs.
Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki@analog.com>
Signed-off-by: Zeynep Arslanbenzer <Zeynep.Arslanbenzer@analog.com>
---
drivers/rtc/Kconfig | 11 +
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-max313xx.c | 1070 ++++++++++++++++++++++++++++++++++++
3 files changed, 1082 insertions(+)
create mode 100644 drivers/rtc/rtc-max313xx.c
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index b8de25118..71ea390dc 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -323,6 +323,17 @@ config RTC_DRV_LP8788
help
Say Y to enable support for the LP8788 RTC/ALARM driver.
+config RTC_DRV_MAX313XX
+ tristate "Analog Devices MAX313XX RTC driver"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ If you say yes here you will get support for the
+ Analog Devices MAX313XX series RTC family.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-max313xx.
+
config RTC_DRV_MAX6900
tristate "Maxim MAX6900"
help
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index aab22bc63..3d1aab897 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -89,6 +89,7 @@ obj-$(CONFIG_RTC_DRV_M41T94) += rtc-m41t94.o
obj-$(CONFIG_RTC_DRV_M48T35) += rtc-m48t35.o
obj-$(CONFIG_RTC_DRV_M48T59) += rtc-m48t59.o
obj-$(CONFIG_RTC_DRV_M48T86) += rtc-m48t86.o
+obj-$(CONFIG_RTC_DRV_MAX313XX) += rtc-max313xx.o
obj-$(CONFIG_RTC_DRV_MAX6900) += rtc-max6900.o
obj-$(CONFIG_RTC_DRV_MAX6902) += rtc-max6902.o
obj-$(CONFIG_RTC_DRV_MAX6916) += rtc-max6916.o
diff --git a/drivers/rtc/rtc-max313xx.c b/drivers/rtc/rtc-max313xx.c
new file mode 100644
index 000000000..b1f7ab189
--- /dev/null
+++ b/drivers/rtc/rtc-max313xx.c
@@ -0,0 +1,1070 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Analog Devices MAX313XX series I2C RTC driver
+ *
+ * Copyright 2022 Analog Devices Inc.
+ */
+#include <asm-generic/unaligned.h>
+#include <linux/bcd.h>
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/hwmon.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/rtc.h>
+#include <linux/util_macros.h>
+
+/* common registers */
+#define MAX313XX_INT_ALARM1 BIT(0)
+#define MAX313XX_INT_ALARM2 BIT(1)
+#define MAX313XX_HRS_F_12_24 BIT(6)
+#define MAX313XX_HRS_F_AM_PM BIT(5)
+#define MAX313XX_MONTH_CENTURY BIT(7)
+
+#define MAX313XX_TMR_CFG_ENABLE BIT(4)
+#define MAX313XX_TMR_CFG_FREQ_MASK GENMASK(1, 0)
+#define MAX313XX_TMR_CFG_FREQ_16HZ 0x03
+
+#define MAX313XX_REG_MINUTE 0x01
+#define MAX313XX_REG_HOUR 0x02
+
+#define MAX313XX_TIME_SIZE 0x07
+
+/* device specific registers */
+#define MAX3134X_CFG2_REG 0x01
+#define MAX3134X_CFG2_SET_RTC BIT(1)
+
+#define MAX31341_TRICKLE_RES_MASK GENMASK(1, 0)
+#define MAX31341_TRICKLE_DIODE_EN BIT(2)
+#define MAX31341_TRICKLE_ENABLE_BIT BIT(3)
+#define MAX31341_POWER_MGMT_REG 0x56
+#define MAX31341_POWER_MGMT_TRICKLE_BIT BIT(0)
+
+#define MAX3133X_TRICKLE_RES_MASK GENMASK(2, 1)
+#define MAX3133X_TRICKLE_DIODE_EN BIT(3)
+#define MAX3133X_TRICKLE_ENABLE_BIT BIT(0)
+
+#define MAX31329_TRICKLE_ENABLE_BIT BIT(7)
+#define MAX31343_TRICKLE_ENABLE_MASK GENMASK(7, 4)
+#define MAX31343_TRICKLE_ENABLE_CODE 5
+#define MAX31329_43_TRICKLE_RES_MASK GENMASK(1, 0)
+#define MAX31329_43_TRICKLE_DIODE_EN BIT(2)
+
+#define MAX31329_CONFIG2_REG 0x04
+#define MAX31329_CONFIG2_CLKIN_EN BIT(2)
+#define MAX31329_CONFIG2_CLKIN_FREQ GENMASK(1, 0)
+
+#define MAX31341_42_CONFIG1_REG 0x00
+#define MAX31341_42_CONFIG1_CLKIN_EN BIT(7)
+#define MAX31341_42_CONFIG1_CLKIN_FREQ GENMASK(5, 4)
+#define MAX31341_42_CONFIG1_OSC_DISABLE BIT(3)
+#define MAX31341_42_CONFIG1_SWRST BIT(0)
+
+enum max313xx_ids {
+ ID_MAX31328,
+ ID_MAX31329,
+ ID_MAX31331,
+ ID_MAX31334,
+ ID_MAX31341,
+ ID_MAX31342,
+ ID_MAX31343,
+ MAX313XX_ID_NR
+};
+
+struct clkout_cfg {
+ const int *freq_avail;
+ u8 freq_size;
+ u8 freq_pos;
+ u8 reg;
+ u8 en_bit;
+ bool en_invert;
+};
+
+struct chip_desc {
+ struct clkout_cfg *clkout;
+ const char *clkout_name;
+ u8 sec_reg;
+ u8 alarm1_sec_reg;
+
+ u8 int_en_reg;
+ u8 int_status_reg;
+
+ u8 ram_reg;
+ u8 ram_size;
+
+ u8 temp_reg;
+
+ u8 trickle_reg;
+};
+
+#define clk_hw_to_max313xx(_hw) container_of(_hw, struct max313xx, clkout)
+
+struct max313xx {
+ enum max313xx_ids id;
+ struct regmap *regmap;
+ struct rtc_device *rtc;
+ struct clk_hw clkout;
+ struct clk *clkin;
+ const struct chip_desc *chip;
+ int irqs[2];
+ int irq;
+};
+
+static const int max313xx_clkin_freq[] = { 1, 50, 60, 32768 };
+
+static const int max31328_clkout_freq[] = { 1, 1024, 4096, 8192 };
+static const int max31329_clkout_freq[] = { 1, 4096, 8192, 32768 };
+static const int max3133x_clkout_freq[] = { 1, 64, 1024, 32768 };
+static const int max31341_42_clkout_freq[] = { 1, 50, 60, 32768 };
+static const int max31343_clkout_freq[] = { 1, 2, 4, 8, 16, 32, 64, 128, 32875 };
+
+static struct clkout_cfg max31328_clkout = {
+ .freq_avail = max31328_clkout_freq,
+ .freq_size = ARRAY_SIZE(max31328_clkout_freq),
+ .freq_pos = 3,
+ .reg = 0x0E,
+ .en_bit = BIT(3),
+ .en_invert = true,
+};
+
+static struct clkout_cfg max31329_clkout = {
+ .freq_avail = max31329_clkout_freq,
+ .freq_size = ARRAY_SIZE(max31329_clkout_freq),
+ .freq_pos = 5,
+ .reg = 0x04,
+ .en_bit = BIT(7),
+};
+
+static struct clkout_cfg max3133x_clkout = {
+ .freq_avail = max3133x_clkout_freq,
+ .freq_size = ARRAY_SIZE(max3133x_clkout_freq),
+ .freq_pos = 0,
+ .reg = 0x04,
+ .en_bit = BIT(2),
+};
+
+static struct clkout_cfg max31341_42_clkout = {
+ .freq_avail = max31341_42_clkout_freq,
+ .freq_size = ARRAY_SIZE(max31341_42_clkout_freq),
+ .freq_pos = 1,
+ .reg = 0x00,
+ .en_bit = BIT(6),
+ .en_invert = true,
+};
+
+static struct clkout_cfg max31343_clkout = {
+ .freq_avail = max31343_clkout_freq,
+ .freq_size = ARRAY_SIZE(max31343_clkout_freq),
+ .freq_pos = 3,
+ .reg = 0x04,
+ .en_bit = BIT(7),
+};
+
+static const struct chip_desc chip[MAX313XX_ID_NR] = {
+ [ID_MAX31328] = {
+ .int_en_reg = 0x0E,
+ .int_status_reg = 0x0F,
+ .sec_reg = 0x00,
+ .alarm1_sec_reg = 0x07,
+ .temp_reg = 0x11,
+ .clkout = &max31328_clkout,
+ .clkout_name = "max31328-sqw",
+ },
+ [ID_MAX31329] = {
+ .int_en_reg = 0x01,
+ .int_status_reg = 0x00,
+ .sec_reg = 0x06,
+ .alarm1_sec_reg = 0x0D,
+ .ram_reg = 0x22,
+ .ram_size = 64,
+ .trickle_reg = 0x19,
+ .clkout = &max31329_clkout,
+ .clkout_name = "max31329-clkout",
+ },
+ [ID_MAX31331] = {
+ .int_en_reg = 0x01,
+ .int_status_reg = 0x00,
+ .sec_reg = 0x08,
+ .alarm1_sec_reg = 0x0F,
+ .ram_reg = 0x20,
+ .ram_size = 32,
+ .trickle_reg = 0x1B,
+ .clkout = &max3133x_clkout,
+ .clkout_name = "max31331-clkout",
+ },
+ [ID_MAX31334] = {
+ .int_en_reg = 0x01,
+ .int_status_reg = 0x00,
+ .sec_reg = 0x09,
+ .alarm1_sec_reg = 0x10,
+ .ram_reg = 0x30,
+ .ram_size = 32,
+ .trickle_reg = 0x1E,
+ .clkout = &max3133x_clkout,
+ .clkout_name = "max31334-clkout",
+ },
+ [ID_MAX31341] = {
+ .int_en_reg = 0x04,
+ .int_status_reg = 0x05,
+ .sec_reg = 0x06,
+ .alarm1_sec_reg = 0x0D,
+ .ram_reg = 0x16,
+ .ram_size = 64,
+ .trickle_reg = 0x57,
+ .clkout = &max31341_42_clkout,
+ .clkout_name = "max31341-clkout",
+ },
+ [ID_MAX31342] = {
+ .int_en_reg = 0x04,
+ .int_status_reg = 0x05,
+ .sec_reg = 0x06,
+ .alarm1_sec_reg = 0x0D,
+ .clkout = &max31341_42_clkout,
+ .clkout_name = "max31342-clkout",
+ },
+ [ID_MAX31343] = {
+ .int_en_reg = 0x01,
+ .int_status_reg = 0x00,
+ .sec_reg = 0x06,
+ .alarm1_sec_reg = 0x0D,
+ .ram_reg = 0x22,
+ .ram_size = 64,
+ .temp_reg = 0x1A,
+ .trickle_reg = 0x19,
+ .clkout = &max31343_clkout,
+ .clkout_name = "max31343-sqw",
+ },
+};
+
+static const u32 max313xx_trickle_ohms[] = { 3000, 6000, 11000 };
+
+static bool max313xx_volatile_reg(struct device *dev, unsigned int reg)
+{
+ struct max313xx *rtc = dev_get_drvdata(dev);
+ const struct chip_desc *chip = rtc->chip;
+
+ /* time keeping registers */
+ if (reg >= chip->sec_reg && reg < chip->sec_reg + MAX313XX_TIME_SIZE)
+ return true;
+
+ /* interrupt status register */
+ if (reg == chip->int_status_reg)
+ return true;
+
+ /* temperature registers */
+ return chip->temp_reg &&
+ (reg == chip->temp_reg || reg == chip->temp_reg + 1);
+}
+
+static const struct regmap_config regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .cache_type = REGCACHE_RBTREE,
+ .volatile_reg = max313xx_volatile_reg,
+};
+
+static int max313xx_get_hour(u8 hour_reg)
+{
+ int hour;
+
+ /* 24Hr mode */
+ if (!FIELD_GET(MAX313XX_HRS_F_12_24, hour_reg))
+ return bcd2bin(hour_reg & 0x3f);
+
+ /* 12Hr mode */
+ hour = bcd2bin(hour_reg & 0x1f);
+ if (hour == 12)
+ hour = 0;
+
+ if (FIELD_GET(MAX313XX_HRS_F_AM_PM, hour_reg))
+ hour += 12;
+
+ return hour;
+}
+
+static int max313xx_read_time(struct device *dev, struct rtc_time *t)
+{
+ struct max313xx *rtc = dev_get_drvdata(dev);
+ u8 regs[7];
+ int ret;
+
+ ret = regmap_bulk_read(rtc->regmap, rtc->chip->sec_reg, regs, 7);
+ if (ret)
+ return ret;
+
+ t->tm_sec = bcd2bin(regs[0] & 0x7f);
+ t->tm_min = bcd2bin(regs[1] & 0x7f);
+ t->tm_hour = max313xx_get_hour(regs[2]);
+ t->tm_wday = bcd2bin(regs[3] & 0x07) - 1;
+ t->tm_mday = bcd2bin(regs[4] & 0x3f);
+ t->tm_mon = bcd2bin(regs[5] & 0x1f) - 1;
+ t->tm_year = bcd2bin(regs[6]) + 100;
+
+ if (FIELD_GET(MAX313XX_MONTH_CENTURY, regs[5]))
+ t->tm_year += 100;
+
+ return 0;
+}
+
+static int max313xx_set_time(struct device *dev, struct rtc_time *t)
+{
+ struct max313xx *rtc = dev_get_drvdata(dev);
+ u8 regs[7];
+ int ret;
+
+ regs[0] = bin2bcd(t->tm_sec);
+ regs[1] = bin2bcd(t->tm_min);
+ regs[2] = bin2bcd(t->tm_hour);
+ regs[3] = bin2bcd(t->tm_wday + 1);
+ regs[4] = bin2bcd(t->tm_mday);
+ regs[5] = bin2bcd(t->tm_mon + 1);
+ regs[6] = bin2bcd(t->tm_year % 100);
+
+ if (t->tm_year >= 200)
+ regs[5] |= FIELD_PREP(MAX313XX_MONTH_CENTURY, 1);
+
+ /* Clkin needs to be disabled before setting time. */
+ if (rtc->clkin) {
+ switch (rtc->id) {
+ case ID_MAX31341:
+ case ID_MAX31342:
+ ret = regmap_clear_bits(rtc->regmap,
+ MAX31341_42_CONFIG1_REG,
+ MAX31341_42_CONFIG1_CLKIN_EN);
+ break;
+ default:
+ ret = 0;
+ }
+ if (ret)
+ return ret;
+ }
+
+ ret = regmap_bulk_write(rtc->regmap, rtc->chip->sec_reg, regs, 7);
+ if (ret)
+ return ret;
+
+ switch (rtc->id) {
+ case ID_MAX31341:
+ case ID_MAX31342:
+ ret = regmap_set_bits(rtc->regmap, MAX3134X_CFG2_REG,
+ MAX3134X_CFG2_SET_RTC);
+ if (ret)
+ return ret;
+
+ fsleep(10000);
+
+ ret = regmap_clear_bits(rtc->regmap, MAX3134X_CFG2_REG,
+ MAX3134X_CFG2_SET_RTC);
+ if (ret)
+ return ret;
+
+ if (rtc->clkin)
+ ret = regmap_set_bits(rtc->regmap,
+ MAX31341_42_CONFIG1_REG,
+ MAX31341_42_CONFIG1_CLKIN_EN);
+
+ break;
+ default:
+ break;
+ }
+
+ return ret;
+}
+
+static int max313xx_read_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+ struct max313xx *rtc = dev_get_drvdata(dev);
+ unsigned int status, int_en;
+ struct rtc_time time;
+ u8 regs[6];
+ int ret;
+
+ ret = regmap_bulk_read(rtc->regmap, rtc->chip->alarm1_sec_reg, regs,
+ sizeof(regs));
+ if (ret)
+ return ret;
+
+ t->time.tm_sec = bcd2bin(regs[0] & 0x7f);
+ t->time.tm_min = bcd2bin(regs[1] & 0x7f);
+ t->time.tm_hour = bcd2bin(regs[2] & 0x3f);
+ t->time.tm_mday = bcd2bin(regs[3] & 0x3f);
+ t->time.tm_mon = bcd2bin(regs[4] & 0x1f) - 1;
+ t->time.tm_year = bcd2bin(regs[5]) + 100;
+
+ ret = max313xx_read_time(dev, &time);
+ if (ret)
+ return ret;
+
+ if (time.tm_year >= 200)
+ t->time.tm_year += 100;
+
+ ret = regmap_read(rtc->regmap, rtc->chip->int_status_reg, &status);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(rtc->regmap, rtc->chip->int_en_reg, &int_en);
+ if (ret)
+ return ret;
+
+ t->enabled = FIELD_GET(MAX313XX_INT_ALARM1, int_en);
+ t->pending = FIELD_GET(MAX313XX_INT_ALARM1, status);
+
+ return 0;
+}
+
+static int max313xx_set_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+ struct max313xx *rtc = dev_get_drvdata(dev);
+ unsigned int reg;
+ u8 regs[6];
+ int ret;
+
+ regs[0] = bin2bcd(t->time.tm_sec);
+ regs[1] = bin2bcd(t->time.tm_min);
+ regs[2] = bin2bcd(t->time.tm_hour);
+ regs[3] = bin2bcd(t->time.tm_mday);
+ regs[4] = bin2bcd(t->time.tm_mon + 1);
+ regs[5] = bin2bcd(t->time.tm_year % 100);
+
+ ret = regmap_bulk_write(rtc->regmap, rtc->chip->alarm1_sec_reg, regs,
+ sizeof(regs));
+ if (ret)
+ return ret;
+
+ reg = FIELD_PREP(MAX313XX_INT_ALARM1, t->enabled);
+ ret = regmap_update_bits(rtc->regmap, rtc->chip->int_en_reg,
+ MAX313XX_INT_ALARM1 | MAX313XX_INT_ALARM2,
+ reg);
+ if (ret)
+ return ret;
+
+ /* Clear status register */
+ return regmap_read(rtc->regmap, rtc->chip->int_status_reg, ®);
+}
+
+static int max313xx_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+ struct max313xx *rtc = dev_get_drvdata(dev);
+
+ return regmap_update_bits(rtc->regmap, rtc->chip->int_en_reg,
+ MAX313XX_INT_ALARM1,
+ FIELD_PREP(MAX313XX_INT_ALARM1, enabled));
+}
+
+static const struct rtc_class_ops max3133x_rtc_ops = {
+ .read_time = max313xx_read_time,
+ .set_time = max313xx_set_time,
+ .read_alarm = max313xx_read_alarm,
+ .set_alarm = max313xx_set_alarm,
+ .alarm_irq_enable = max313xx_alarm_irq_enable,
+};
+
+static irqreturn_t max313xx_irq(int irq, void *dev_id)
+{
+ struct max313xx *rtc = dev_id;
+ struct mutex *lock = &rtc->rtc->ops_lock;
+ int stat, ret;
+
+ mutex_lock(lock);
+ ret = regmap_read(rtc->regmap, rtc->chip->int_status_reg, &stat);
+ if (ret)
+ goto out;
+
+ if (FIELD_GET(MAX313XX_INT_ALARM1, stat)) {
+ ret = regmap_update_bits(rtc->regmap, rtc->chip->int_en_reg,
+ MAX313XX_INT_ALARM1, 0);
+ if (ret)
+ goto out;
+
+ rtc_update_irq(rtc->rtc, 1, RTC_AF | RTC_IRQF);
+ }
+
+out:
+ mutex_unlock(lock);
+
+ return IRQ_HANDLED;
+}
+
+static int max313xx_nvmem_reg_read(void *priv, unsigned int offset,
+ void *val, size_t bytes)
+{
+ struct max313xx *rtc = priv;
+ unsigned int reg = rtc->chip->ram_reg + offset;
+
+ return regmap_bulk_read(rtc->regmap, reg, val, bytes);
+}
+
+static int max313xx_nvmem_reg_write(void *priv, unsigned int offset,
+ void *val, size_t bytes)
+{
+ struct max313xx *rtc = priv;
+ unsigned int reg = rtc->chip->ram_reg + offset;
+
+ return regmap_bulk_write(rtc->regmap, reg, val, bytes);
+}
+
+struct nvmem_config max313xx_nvmem_cfg = {
+ .reg_read = max313xx_nvmem_reg_read,
+ .reg_write = max313xx_nvmem_reg_write,
+ .word_size = 8,
+};
+
+static unsigned long max313xx_clkout_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct max313xx *rtc = clk_hw_to_max313xx(hw);
+ const struct clkout_cfg *clkout = rtc->chip->clkout;
+ unsigned int freq_mask;
+ unsigned int reg;
+ int ret;
+
+ ret = regmap_read(rtc->regmap, clkout->reg, ®);
+ if (ret)
+ return 0;
+
+ freq_mask = __roundup_pow_of_two(clkout->freq_size) - 1;
+
+ return clkout->freq_avail[(reg >> clkout->freq_pos) & freq_mask];
+}
+
+static long max313xx_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct max313xx *rtc = clk_hw_to_max313xx(hw);
+ struct clkout_cfg *clkout = rtc->chip->clkout;
+ int index;
+
+ index = find_closest(rate, clkout->freq_avail, clkout->freq_size);
+ return clkout->freq_avail[index];
+}
+
+static int max313xx_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct max313xx *rtc = clk_hw_to_max313xx(hw);
+ struct clkout_cfg *clkout = rtc->chip->clkout;
+ unsigned int freq_mask;
+ int index;
+
+ index = find_closest(rate, clkout->freq_avail, clkout->freq_size);
+ freq_mask = __roundup_pow_of_two(clkout->freq_size) - 1;
+
+ return regmap_update_bits(rtc->regmap, clkout->reg,
+ freq_mask << clkout->freq_pos,
+ index << clkout->freq_pos);
+}
+
+static int max313xx_clkout_enable(struct clk_hw *hw)
+{
+ struct max313xx *rtc = clk_hw_to_max313xx(hw);
+ struct clkout_cfg *clkout = rtc->chip->clkout;
+
+ if (clkout->en_invert)
+ return regmap_clear_bits(rtc->regmap, clkout->reg,
+ clkout->en_bit);
+
+ return regmap_set_bits(rtc->regmap, clkout->reg, clkout->en_bit);
+}
+
+static void max313xx_clkout_disable(struct clk_hw *hw)
+{
+ struct max313xx *rtc = clk_hw_to_max313xx(hw);
+ struct clkout_cfg *clkout = rtc->chip->clkout;
+
+ switch (rtc->id) {
+ case ID_MAX31331:
+ case ID_MAX31334:
+ if (rtc->irq > 0) {
+ dev_err(rtc->rtc->dev.parent,
+ "clkout cannot be disabled when IRQ is requested");
+ return;
+ }
+ break;
+ default:
+ break;
+ }
+
+ if (clkout->en_invert)
+ regmap_set_bits(rtc->regmap, clkout->reg, clkout->en_bit);
+ else
+ regmap_clear_bits(rtc->regmap, clkout->reg, clkout->en_bit);
+}
+
+static int max313xx_clkout_is_enabled(struct clk_hw *hw)
+{
+ struct max313xx *rtc = clk_hw_to_max313xx(hw);
+ struct clkout_cfg *clkout = rtc->chip->clkout;
+ unsigned int reg;
+ int ret;
+
+ ret = regmap_read(rtc->regmap, clkout->reg, ®);
+ if (ret)
+ return ret;
+
+ return !!(reg & clkout->en_bit) ^ clkout->en_invert;
+}
+
+static const struct clk_ops max313xx_clkout_ops = {
+ .recalc_rate = max313xx_clkout_recalc_rate,
+ .round_rate = max313xx_clkout_round_rate,
+ .set_rate = max313xx_clkout_set_rate,
+ .enable = max313xx_clkout_enable,
+ .disable = max313xx_clkout_disable,
+ .is_enabled = max313xx_clkout_is_enabled,
+};
+
+struct clk_init_data max313xx_clk_init = {
+ .name = "max313xx-clkout",
+ .ops = &max313xx_clkout_ops,
+};
+
+static int max313xx_read_temp(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ struct max313xx *rtc = dev_get_drvdata(dev);
+ struct chip_desc desc = chip[rtc->id];
+ u8 reg[2];
+ s16 temp;
+ int ret;
+
+ if (type != hwmon_temp || attr != hwmon_temp_input)
+ return -EOPNOTSUPP;
+
+ ret = regmap_bulk_read(rtc->regmap, desc.temp_reg, reg, 2);
+ if (ret)
+ return ret;
+
+ temp = get_unaligned_be16(reg);
+
+ *val = (temp / 64) * 250;
+
+ return 0;
+}
+
+static umode_t max313xx_is_visible(const void *data,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ if (type == hwmon_temp && attr == hwmon_temp_input)
+ return 0444;
+
+ return 0;
+}
+
+static const struct hwmon_channel_info *max313xx_info[] = {
+ HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT),
+ NULL
+};
+
+static const struct hwmon_ops max313xx_hwmon_ops = {
+ .is_visible = max313xx_is_visible,
+ .read = max313xx_read_temp,
+};
+
+static const struct hwmon_chip_info max313xx_chip_info = {
+ .ops = &max313xx_hwmon_ops,
+ .info = max313xx_info,
+};
+
+static int max313xx_init(struct max313xx *rtc)
+{
+ int ret;
+
+ switch (rtc->id) {
+ case ID_MAX31341:
+ case ID_MAX31342:
+ ret = regmap_clear_bits(rtc->regmap, MAX31341_42_CONFIG1_REG,
+ MAX31341_42_CONFIG1_OSC_DISABLE);
+ if (ret)
+ return ret;
+
+ return regmap_set_bits(rtc->regmap, MAX31341_42_CONFIG1_REG,
+ MAX31341_42_CONFIG1_SWRST);
+ default:
+ return 0;
+ }
+}
+
+static int max313xx_clkout_register(struct device *dev)
+{
+ struct max313xx *rtc = dev_get_drvdata(dev);
+ int ret;
+
+ if (!device_property_present(dev, "#clock-cells"))
+ return 0;
+
+ max313xx_clk_init.name = rtc->chip->clkout_name;
+ device_property_read_string(dev, "clock-output-names",
+ &max313xx_clk_init.name);
+ rtc->clkout.init = &max313xx_clk_init;
+
+ ret = devm_clk_hw_register(dev, &rtc->clkout);
+ if (ret)
+ return dev_err_probe(dev, ret, "cannot register clock\n");
+
+ return of_clk_add_provider(dev->of_node, of_clk_src_simple_get,
+ rtc->clkout.clk);
+}
+
+static int max313xx_trickle_charger_setup(struct device *dev)
+{
+ struct max313xx *rtc = dev_get_drvdata(dev);
+ bool diode_disable;
+ int index, reg;
+ u32 ohms = 0;
+ int ret;
+
+ device_property_read_u32(dev, "trickle-resistor-ohms", &ohms);
+ if (!ohms)
+ return 0;
+
+ diode_disable = device_property_read_bool(dev, "trickle-diode-disable");
+
+ if (!rtc->chip->trickle_reg) {
+ dev_warn(dev, "device does not have trickle charger\n");
+ return 0;
+ }
+
+ index = find_closest(ohms, max313xx_trickle_ohms,
+ ARRAY_SIZE(max313xx_trickle_ohms)) + 1;
+
+ switch (rtc->id) {
+ case ID_MAX31329:
+ reg = FIELD_PREP(MAX31329_TRICKLE_ENABLE_BIT, 1) |
+ FIELD_PREP(MAX31329_43_TRICKLE_RES_MASK, index) |
+ FIELD_PREP(MAX31329_43_TRICKLE_DIODE_EN, !diode_disable);
+ break;
+ case ID_MAX31331:
+ case ID_MAX31334:
+ reg = FIELD_PREP(MAX3133X_TRICKLE_ENABLE_BIT, 1) |
+ FIELD_PREP(MAX3133X_TRICKLE_DIODE_EN, !diode_disable) |
+ FIELD_PREP(MAX3133X_TRICKLE_RES_MASK, index);
+ break;
+ case ID_MAX31341:
+ if (index == 1)
+ index = 0;
+ reg = FIELD_PREP(MAX31341_TRICKLE_ENABLE_BIT, 1) |
+ FIELD_PREP(MAX31341_TRICKLE_DIODE_EN, !diode_disable) |
+ FIELD_PREP(MAX31341_TRICKLE_RES_MASK, index);
+
+ ret = regmap_set_bits(rtc->regmap, MAX31341_POWER_MGMT_REG,
+ MAX31341_POWER_MGMT_TRICKLE_BIT);
+ if (ret)
+ return ret;
+
+ break;
+ case ID_MAX31343:
+ reg = FIELD_PREP(MAX31329_43_TRICKLE_RES_MASK, index) |
+ FIELD_PREP(MAX31329_43_TRICKLE_DIODE_EN, !diode_disable) |
+ FIELD_PREP(MAX31343_TRICKLE_ENABLE_MASK,
+ MAX31343_TRICKLE_ENABLE_CODE);
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ return regmap_write(rtc->regmap, rtc->chip->trickle_reg, reg);
+}
+
+static int max313xx_find_clkin_freq_index(struct clk *clk)
+{
+ unsigned long rate = clk_get_rate(clk);
+ int freq;
+ int i;
+
+ i = find_closest(rate, max313xx_clkin_freq,
+ ARRAY_SIZE(max313xx_clkin_freq));
+ if (max313xx_clkin_freq[i] == rate)
+ return i;
+
+ for (i = ARRAY_SIZE(max313xx_clkin_freq) - 1; i >= 0; i--) {
+ freq = max313xx_clkin_freq[i];
+ if (freq == clk_round_rate(clk, freq))
+ return i;
+ }
+
+ /* supplied clock cannot produce one of desired frequency rate */
+ return -ENODEV;
+}
+
+static int max313xx_clkin_init(struct device *dev)
+{
+ struct max313xx *rtc = dev_get_drvdata(dev);
+ int rate;
+ int ret;
+
+ rtc->clkin = devm_clk_get_enabled(dev, NULL);
+ if (IS_ERR(rtc->clkin)) {
+ if (PTR_ERR(rtc->clkin) == -ENOENT)
+ rtc->clkin = NULL;
+ else
+ return dev_err_probe(dev, PTR_ERR(rtc->clkin),
+ "error while clkin setup\n");
+ }
+
+ if (!rtc->clkin) {
+ switch (rtc->id) {
+ case ID_MAX31329:
+ return regmap_clear_bits(rtc->regmap,
+ MAX31329_CONFIG2_REG,
+ MAX31329_CONFIG2_CLKIN_EN);
+ case ID_MAX31341:
+ case ID_MAX31342:
+ return regmap_clear_bits(rtc->regmap,
+ MAX31341_42_CONFIG1_REG,
+ MAX31341_42_CONFIG1_CLKIN_EN);
+ default:
+ return 0;
+ }
+ }
+
+ rate = max313xx_find_clkin_freq_index(rtc->clkin);
+ if (rate < 0)
+ return dev_err_probe(dev, rate,
+ "clkin cannot produce required frequency\n");
+
+ ret = clk_set_rate(rtc->clkin, max313xx_clkin_freq[rate]);
+ if (ret)
+ return ret;
+
+ switch (rtc->id) {
+ case ID_MAX31329:
+ ret = regmap_update_bits(rtc->regmap, MAX31329_CONFIG2_REG,
+ MAX31329_CONFIG2_CLKIN_FREQ, rate);
+ if (ret)
+ return ret;
+
+ return regmap_set_bits(rtc->regmap, MAX31329_CONFIG2_REG,
+ MAX31329_CONFIG2_CLKIN_EN);
+ case ID_MAX31341:
+ case ID_MAX31342:
+ ret = regmap_update_bits(rtc->regmap, MAX31341_42_CONFIG1_REG,
+ MAX31341_42_CONFIG1_CLKIN_FREQ,
+ FIELD_PREP(MAX31341_42_CONFIG1_CLKIN_FREQ, rate));
+ if (ret)
+ return ret;
+
+ return regmap_set_bits(rtc->regmap, MAX31341_42_CONFIG1_REG,
+ MAX31341_42_CONFIG1_CLKIN_EN);
+ default:
+ rtc->clkin = NULL;
+ dev_warn(dev, "device does not have clock input\n");
+ return 0;
+ }
+}
+
+static int max313xx_irq_init(struct device *dev, const char *devname)
+{
+ struct max313xx *rtc = dev_get_drvdata(dev);
+ bool wakeup;
+ int ret;
+
+ rtc->irq = rtc->irqs[0];
+
+ switch (rtc->id) {
+ case ID_MAX31328:
+ /* max31328 sqw ant int pin is shared */
+ if (rtc->id == ID_MAX31328 && rtc->irq > 0 && rtc->clkout.clk)
+ return dev_err_probe(dev, -EOPNOTSUPP,
+ "cannot have both sqw clock output and irq enabled");
+
+ break;
+ case ID_MAX31331:
+ case ID_MAX31334:
+ if (rtc->clkout.clk) {
+ /* clockout needs to be enabled for using INTA pin */
+ ret = clk_prepare_enable(rtc->clkout.clk);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "cannot enable clkout\n");
+ } else {
+ rtc->irq = rtc->irqs[1];
+ }
+ break;
+ default:
+ if (rtc->clkin) {
+ rtc->irq = rtc->irqs[1];
+
+ /* wrong interrupt specified */
+ if (rtc->irqs[0] > 0 && rtc->irqs[1] <= 0)
+ dev_warn(dev, "INTA is specified but INTB required for irq when clkin is enabled\n");
+
+ if (rtc->clkout.clk && rtc->irq > 0)
+ return dev_err_probe(dev, -EOPNOTSUPP,
+ "irq not possible when both clkin and clkout are configured\n");
+
+ if (rtc->irq <= 0)
+ break;
+
+ /* clkout needs to be disabled for using INTB pin */
+ if (rtc->chip->clkout->en_invert)
+ ret = regmap_set_bits(rtc->regmap,
+ rtc->chip->clkout->reg,
+ rtc->chip->clkout->en_bit);
+ else
+ ret = regmap_clear_bits(rtc->regmap,
+ rtc->chip->clkout->reg,
+ rtc->chip->clkout->en_bit);
+
+ if (ret)
+ return ret;
+ }
+ break;
+ }
+
+ if (rtc->irq > 0) {
+ ret = devm_request_threaded_irq(dev, rtc->irq, NULL,
+ &max313xx_irq, IRQF_ONESHOT,
+ devname, rtc);
+ if (ret)
+ return ret;
+
+ wakeup = device_property_read_bool(dev, "wakeup-source");
+ return device_init_wakeup(dev, wakeup);
+ }
+
+ __clear_bit(RTC_FEATURE_ALARM, rtc->rtc->features);
+
+ return 0;
+}
+
+static int max313xx_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ struct max313xx *max313xx;
+ struct device *hwmon;
+ const void *match;
+ int ret;
+
+ max313xx = devm_kzalloc(&client->dev, sizeof(*max313xx), GFP_KERNEL);
+ if (!max313xx)
+ return -ENOMEM;
+
+ dev_set_drvdata(&client->dev, max313xx);
+
+ max313xx->regmap = devm_regmap_init_i2c(client, ®map_config);
+ if (IS_ERR(max313xx->regmap)) {
+ return dev_err_probe(dev, PTR_ERR(max313xx->regmap),
+ "regmap init failed\n");
+ }
+
+ i2c_set_clientdata(client, max313xx);
+
+ match = device_get_match_data(dev);
+ if (match)
+ max313xx->id = (enum max313xx_ids)match;
+ else if (id)
+ max313xx->id = id->driver_data;
+ else
+ return -ENODEV;
+
+ max313xx->chip = &chip[max313xx->id];
+
+ ret = max313xx_init(max313xx);
+ if (ret)
+ return ret;
+
+ max313xx->rtc = devm_rtc_allocate_device(dev);
+ if (IS_ERR(max313xx->rtc))
+ return PTR_ERR(max313xx->rtc);
+
+ max313xx->rtc->ops = &max3133x_rtc_ops;
+ max313xx->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
+ max313xx->rtc->range_max = RTC_TIMESTAMP_END_2199;
+
+ ret = devm_rtc_register_device(max313xx->rtc);
+ if (ret)
+ return ret;
+
+ switch (max313xx->id) {
+ case ID_MAX31328:
+ case ID_MAX31343:
+ max313xx->irqs[0] = client->irq;
+ break;
+ default:
+ max313xx->irqs[0] = fwnode_irq_get_byname(dev_fwnode(dev), "INTA");
+ max313xx->irqs[1] = fwnode_irq_get_byname(dev_fwnode(dev), "INTB");
+ if (max313xx->irqs[0] <= 0 && max313xx->irqs[1] <= 0 && client->irq)
+ return dev_err_probe(dev, -ENOENT,
+ "interrupt requested but no interrupt name specified\n");
+
+ break;
+ }
+
+ ret = max313xx_clkout_register(dev);
+ if (ret)
+ return ret;
+
+ ret = max313xx_clkin_init(dev);
+ if (ret)
+ return ret;
+
+ /* IRQ wiring depends on the clock configuration so parse them first */
+ ret = max313xx_irq_init(dev, client->name);
+ if (ret)
+ return ret;
+
+ if (max313xx->chip->ram_size) {
+ max313xx_nvmem_cfg.size = max313xx->chip->ram_size;
+ max313xx_nvmem_cfg.priv = max313xx;
+
+ ret = devm_rtc_nvmem_register(max313xx->rtc, &max313xx_nvmem_cfg);
+ if (ret)
+ dev_warn(dev, "cannot register rtc nvmem\n");
+ }
+
+ if (max313xx->chip->temp_reg) {
+ hwmon = devm_hwmon_device_register_with_info(dev, client->name,
+ max313xx,
+ &max313xx_chip_info,
+ NULL);
+ if (IS_ERR(hwmon))
+ dev_warn(dev, "cannot register hwmon device: %li\n",
+ PTR_ERR(hwmon));
+ }
+
+ return max313xx_trickle_charger_setup(dev);
+}
+
+static const struct of_device_id max313xx_of_id[] = {
+ { .compatible = "adi,max31328", .data = (void *)ID_MAX31328 },
+ { .compatible = "adi,max31329", .data = (void *)ID_MAX31329 },
+ { .compatible = "adi,max31331", .data = (void *)ID_MAX31331 },
+ { .compatible = "adi,max31334", .data = (void *)ID_MAX31334 },
+ { .compatible = "adi,max31341", .data = (void *)ID_MAX31341 },
+ { .compatible = "adi,max31342", .data = (void *)ID_MAX31342 },
+ { .compatible = "adi,max31343", .data = (void *)ID_MAX31343 },
+ { }
+};
+MODULE_DEVICE_TABLE(of, max313xx_of_id);
+
+static const struct i2c_device_id max313xx_id[] = {
+ { "max31328", ID_MAX31328 },
+ { "max31329", ID_MAX31329 },
+ { "max31331", ID_MAX31331 },
+ { "max31334", ID_MAX31334 },
+ { "max31341", ID_MAX31341 },
+ { "max31342", ID_MAX31342 },
+ { "max31343", ID_MAX31343 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, max313xx_id);
+
+static struct i2c_driver max313xx_driver = {
+ .driver = {
+ .name = "rtc-max313xx",
+ .of_match_table = max313xx_of_id,
+ },
+ .probe = max313xx_probe,
+ .id_table = max313xx_id,
+};
+module_i2c_driver(max313xx_driver);
+
+MODULE_DESCRIPTION("Analog Devices MAX313XX RTCs");
+MODULE_AUTHOR("Zeynep Arslanbenzer <Zeynep.Arslanbenzer@analog.com>");
+MODULE_AUTHOR("Ibrahim Tilki <Ibrahim.Tilki@analog.com>");
+MODULE_SOFTDEP("pre: regmap-i2c");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("1.0");
--
2.25.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v3 2/2] dt-bindings: rtc: add max313xx RTCs
2022-11-08 12:22 [PATCH v3 0/2] drivers: rtc: add max313xx series rtc driver Ibrahim Tilki
2022-11-08 12:22 ` [PATCH v3 1/2] " Ibrahim Tilki
@ 2022-11-08 12:22 ` Ibrahim Tilki
1 sibling, 0 replies; 14+ messages in thread
From: Ibrahim Tilki @ 2022-11-08 12:22 UTC (permalink / raw)
To: a.zummo, alexandre.belloni, jdelvare, linux, robh+dt,
krzysztof.kozlowski+dt
Cc: Ibrahim Tilki, linux-rtc, linux-kernel, linux-hwmon, devicetree,
Zeynep Arslanbenzer, Krzysztof Kozlowski
Devicetree binding documentation for Analog Devices MAX313XX RTCs
Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki@analog.com>
Signed-off-by: Zeynep Arslanbenzer <Zeynep.Arslanbenzer@analog.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../devicetree/bindings/rtc/adi,max313xx.yaml | 151 ++++++++++++++++++
1 file changed, 151 insertions(+)
create mode 100644 Documentation/devicetree/bindings/rtc/adi,max313xx.yaml
diff --git a/Documentation/devicetree/bindings/rtc/adi,max313xx.yaml b/Documentation/devicetree/bindings/rtc/adi,max313xx.yaml
new file mode 100644
index 000000000..7fa28d9d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/adi,max313xx.yaml
@@ -0,0 +1,151 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2022 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/adi,max313xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices MAX313XX series I2C RTCs
+
+maintainers:
+ - Ibrahim Tilki <Ibrahim.Tilki@analog.com>
+ - Zeynep Arslanbenzer <Zeynep.Arslanbenzer@analog.com>
+
+description: Analog Devices MAX313XX series I2C RTCs.
+
+properties:
+ compatible:
+ enum:
+ - adi,max31328
+ - adi,max31329
+ - adi,max31331
+ - adi,max31334
+ - adi,max31341
+ - adi,max31342
+ - adi,max31343
+
+ reg:
+ description: I2C address of the RTC
+ items:
+ - enum: [0x68, 0x69]
+
+ interrupts:
+ minItems: 1
+ maxItems: 2
+
+ interrupt-names:
+ description: |
+ Name of the interrupt pin of the RTC used for IRQ. Not required for
+ RTCs that only have single interrupt pin available. Some of the RTCs
+ share interrupt pins with clock input/output pins.
+ minItems: 1
+ items:
+ - enum: [INTA, INTB]
+ - enum: [INTA, INTB]
+
+ "#clock-cells":
+ description: |
+ RTC can be used as a clock source through its clock output pin when
+ supplied.
+ const: 0
+
+ clocks:
+ description: |
+ RTC uses this clock for clock input when supplied. Clock has to provide
+ one of these four frequencies: 1Hz, 50Hz, 60Hz or 32.768kHz.
+ maxItems: 1
+
+ trickle-diode-disable: true
+
+ trickle-resistor-ohms:
+ description: Enables trickle charger with specified resistor value.
+ enum: [3000, 6000, 11000]
+
+ wakeup-source: true
+
+additionalProperties: false
+
+allOf:
+ - $ref: rtc.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - adi,max31328
+ - adi,max31342
+
+ then:
+ properties:
+ trickle-diode-disable: false
+ trickle-resistor-ohms: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - adi,max31328
+ - adi,max31331
+ - adi,max31334
+ - adi,max31343
+
+ then:
+ properties:
+ clocks: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - adi,max31341
+ - adi,max31342
+
+ then:
+ properties:
+ reg:
+ items:
+ - const: 0x69
+
+ else:
+ properties:
+ reg:
+ items:
+ - const: 0x68
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@68 {
+ reg = <0x68>;
+ compatible = "adi,max31329";
+ clocks = <&clkin>;
+ interrupt-parent = <&gpio>;
+ interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-names = "INTB";
+ };
+ };
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@68 {
+ reg = <0x68>;
+ compatible = "adi,max31331";
+ #clock-cells = <0>;
+ interrupt-parent = <&gpio>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>, <26 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-names = "INTA", "INTB";
+ };
+ };
--
2.25.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH v3 1/2] drivers: rtc: add max313xx series rtc driver
2022-11-08 12:22 ` [PATCH v3 1/2] " Ibrahim Tilki
@ 2022-11-08 12:57 ` Christophe JAILLET
2022-11-08 13:27 ` Guenter Roeck
` (2 subsequent siblings)
3 siblings, 0 replies; 14+ messages in thread
From: Christophe JAILLET @ 2022-11-08 12:57 UTC (permalink / raw)
To: ibrahim.tilki
Cc: Zeynep.Arslanbenzer, a.zummo, alexandre.belloni, devicetree,
jdelvare, krzysztof.kozlowski+dt, linux-hwmon, linux-kernel,
linux-rtc, linux, robh+dt
Le 08/11/2022 à 13:22, Ibrahim Tilki a écrit :
> Adding support for Analog Devices MAX313XX series RTCs.
>
> Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki-OyLXuOCK7orQT0dZR+AlfA@public.gmane.org>
> Signed-off-by: Zeynep Arslanbenzer <Zeynep.Arslanbenzer-OyLXuOCK7orQT0dZR+AlfA@public.gmane.org>
> ---
[...]
> +static int max313xx_clkout_register(struct device *dev)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + int ret;
> +
> + if (!device_property_present(dev, "#clock-cells"))
> + return 0;
> +
> + max313xx_clk_init.name = rtc->chip->clkout_name;
> + device_property_read_string(dev, "clock-output-names",
> + &max313xx_clk_init.name);
> + rtc->clkout.init = &max313xx_clk_init;
> +
> + ret = devm_clk_hw_register(dev, &rtc->clkout);
> + if (ret)
> + return dev_err_probe(dev, ret, "cannot register clock\n");
> +
> + return of_clk_add_provider(dev->of_node, of_clk_src_simple_get,
> + rtc->clkout.clk);
Hi,
No devm like functionality here?
devm_of_clk_add_hw_provider()? (not sure of the impact or not of the
"_hw_" in the function name)
> +}
[...]
> +static int max313xx_irq_init(struct device *dev, const char *devname)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + bool wakeup;
> + int ret;
> +
> + rtc->irq = rtc->irqs[0];
> +
> + switch (rtc->id) {
> + case ID_MAX31328:
> + /* max31328 sqw ant int pin is shared */
> + if (rtc->id == ID_MAX31328 && rtc->irq > 0 && rtc->clkout.clk)
> + return dev_err_probe(dev, -EOPNOTSUPP,
> + "cannot have both sqw clock output and irq enabled");
> +
> + break;
> + case ID_MAX31331:
> + case ID_MAX31334:
> + if (rtc->clkout.clk) {
> + /* clockout needs to be enabled for using INTA pin */
> + ret = clk_prepare_enable(rtc->clkout.clk);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "cannot enable clkout\n");
> + } else {
> + rtc->irq = rtc->irqs[1];
> + }
> + break;
> + default:
> + if (rtc->clkin) {
> + rtc->irq = rtc->irqs[1];
> +
> + /* wrong interrupt specified */
> + if (rtc->irqs[0] > 0 && rtc->irqs[1] <= 0)
> + dev_warn(dev, "INTA is specified but INTB required for irq when clkin is enabled\n");
> +
> + if (rtc->clkout.clk && rtc->irq > 0)
> + return dev_err_probe(dev, -EOPNOTSUPP,
> + "irq not possible when both clkin and clkout are configured\n");
> +
> + if (rtc->irq <= 0)
> + break;
> +
> + /* clkout needs to be disabled for using INTB pin */
> + if (rtc->chip->clkout->en_invert)
> + ret = regmap_set_bits(rtc->regmap,
> + rtc->chip->clkout->reg,
> + rtc->chip->clkout->en_bit);
> + else
> + ret = regmap_clear_bits(rtc->regmap,
> + rtc->chip->clkout->reg,
> + rtc->chip->clkout->en_bit);
> +
> + if (ret)
> + return ret;
> + }
> + break;
> + }
> +
> + if (rtc->irq > 0) {
> + ret = devm_request_threaded_irq(dev, rtc->irq, NULL,
> + &max313xx_irq, IRQF_ONESHOT,
> + devname, rtc);
> + if (ret)
> + return ret;
> +
> + wakeup = device_property_read_bool(dev, "wakeup-source");
> + return device_init_wakeup(dev, wakeup);
> + }
> +
> + __clear_bit(RTC_FEATURE_ALARM, rtc->rtc->features);
Is it safe? Does it worth it to use __clear_bit() instead of clear_bit()
here?
> +
> + return 0;
> +}
[...]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v3 1/2] drivers: rtc: add max313xx series rtc driver
2022-11-08 12:22 ` [PATCH v3 1/2] " Ibrahim Tilki
2022-11-08 12:57 ` Christophe JAILLET
@ 2022-11-08 13:27 ` Guenter Roeck
2022-12-10 22:01 ` Alexandre Belloni
2023-02-14 20:28 ` Chris Packham
3 siblings, 0 replies; 14+ messages in thread
From: Guenter Roeck @ 2022-11-08 13:27 UTC (permalink / raw)
To: Ibrahim Tilki
Cc: a.zummo, alexandre.belloni, jdelvare, robh+dt,
krzysztof.kozlowski+dt, linux-rtc, linux-kernel, linux-hwmon,
devicetree, Zeynep Arslanbenzer
On Tue, Nov 08, 2022 at 03:22:53PM +0300, Ibrahim Tilki wrote:
> Adding support for Analog Devices MAX313XX series RTCs.
>
> Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki@analog.com>
> Signed-off-by: Zeynep Arslanbenzer <Zeynep.Arslanbenzer@analog.com>
For the hwmon part:
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
> ---
> drivers/rtc/Kconfig | 11 +
> drivers/rtc/Makefile | 1 +
> drivers/rtc/rtc-max313xx.c | 1070 ++++++++++++++++++++++++++++++++++++
> 3 files changed, 1082 insertions(+)
> create mode 100644 drivers/rtc/rtc-max313xx.c
>
> diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
> index b8de25118..71ea390dc 100644
> --- a/drivers/rtc/Kconfig
> +++ b/drivers/rtc/Kconfig
> @@ -323,6 +323,17 @@ config RTC_DRV_LP8788
> help
> Say Y to enable support for the LP8788 RTC/ALARM driver.
>
> +config RTC_DRV_MAX313XX
> + tristate "Analog Devices MAX313XX RTC driver"
> + depends on I2C
> + select REGMAP_I2C
> + help
> + If you say yes here you will get support for the
> + Analog Devices MAX313XX series RTC family.
> +
> + This driver can also be built as a module. If so, the module
> + will be called rtc-max313xx.
> +
> config RTC_DRV_MAX6900
> tristate "Maxim MAX6900"
> help
> diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
> index aab22bc63..3d1aab897 100644
> --- a/drivers/rtc/Makefile
> +++ b/drivers/rtc/Makefile
> @@ -89,6 +89,7 @@ obj-$(CONFIG_RTC_DRV_M41T94) += rtc-m41t94.o
> obj-$(CONFIG_RTC_DRV_M48T35) += rtc-m48t35.o
> obj-$(CONFIG_RTC_DRV_M48T59) += rtc-m48t59.o
> obj-$(CONFIG_RTC_DRV_M48T86) += rtc-m48t86.o
> +obj-$(CONFIG_RTC_DRV_MAX313XX) += rtc-max313xx.o
> obj-$(CONFIG_RTC_DRV_MAX6900) += rtc-max6900.o
> obj-$(CONFIG_RTC_DRV_MAX6902) += rtc-max6902.o
> obj-$(CONFIG_RTC_DRV_MAX6916) += rtc-max6916.o
> diff --git a/drivers/rtc/rtc-max313xx.c b/drivers/rtc/rtc-max313xx.c
> new file mode 100644
> index 000000000..b1f7ab189
> --- /dev/null
> +++ b/drivers/rtc/rtc-max313xx.c
> @@ -0,0 +1,1070 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Analog Devices MAX313XX series I2C RTC driver
> + *
> + * Copyright 2022 Analog Devices Inc.
> + */
> +#include <asm-generic/unaligned.h>
> +#include <linux/bcd.h>
> +#include <linux/bitfield.h>
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/hwmon.h>
> +#include <linux/i2c.h>
> +#include <linux/regmap.h>
> +#include <linux/rtc.h>
> +#include <linux/util_macros.h>
> +
> +/* common registers */
> +#define MAX313XX_INT_ALARM1 BIT(0)
> +#define MAX313XX_INT_ALARM2 BIT(1)
> +#define MAX313XX_HRS_F_12_24 BIT(6)
> +#define MAX313XX_HRS_F_AM_PM BIT(5)
> +#define MAX313XX_MONTH_CENTURY BIT(7)
> +
> +#define MAX313XX_TMR_CFG_ENABLE BIT(4)
> +#define MAX313XX_TMR_CFG_FREQ_MASK GENMASK(1, 0)
> +#define MAX313XX_TMR_CFG_FREQ_16HZ 0x03
> +
> +#define MAX313XX_REG_MINUTE 0x01
> +#define MAX313XX_REG_HOUR 0x02
> +
> +#define MAX313XX_TIME_SIZE 0x07
> +
> +/* device specific registers */
> +#define MAX3134X_CFG2_REG 0x01
> +#define MAX3134X_CFG2_SET_RTC BIT(1)
> +
> +#define MAX31341_TRICKLE_RES_MASK GENMASK(1, 0)
> +#define MAX31341_TRICKLE_DIODE_EN BIT(2)
> +#define MAX31341_TRICKLE_ENABLE_BIT BIT(3)
> +#define MAX31341_POWER_MGMT_REG 0x56
> +#define MAX31341_POWER_MGMT_TRICKLE_BIT BIT(0)
> +
> +#define MAX3133X_TRICKLE_RES_MASK GENMASK(2, 1)
> +#define MAX3133X_TRICKLE_DIODE_EN BIT(3)
> +#define MAX3133X_TRICKLE_ENABLE_BIT BIT(0)
> +
> +#define MAX31329_TRICKLE_ENABLE_BIT BIT(7)
> +#define MAX31343_TRICKLE_ENABLE_MASK GENMASK(7, 4)
> +#define MAX31343_TRICKLE_ENABLE_CODE 5
> +#define MAX31329_43_TRICKLE_RES_MASK GENMASK(1, 0)
> +#define MAX31329_43_TRICKLE_DIODE_EN BIT(2)
> +
> +#define MAX31329_CONFIG2_REG 0x04
> +#define MAX31329_CONFIG2_CLKIN_EN BIT(2)
> +#define MAX31329_CONFIG2_CLKIN_FREQ GENMASK(1, 0)
> +
> +#define MAX31341_42_CONFIG1_REG 0x00
> +#define MAX31341_42_CONFIG1_CLKIN_EN BIT(7)
> +#define MAX31341_42_CONFIG1_CLKIN_FREQ GENMASK(5, 4)
> +#define MAX31341_42_CONFIG1_OSC_DISABLE BIT(3)
> +#define MAX31341_42_CONFIG1_SWRST BIT(0)
> +
> +enum max313xx_ids {
> + ID_MAX31328,
> + ID_MAX31329,
> + ID_MAX31331,
> + ID_MAX31334,
> + ID_MAX31341,
> + ID_MAX31342,
> + ID_MAX31343,
> + MAX313XX_ID_NR
> +};
> +
> +struct clkout_cfg {
> + const int *freq_avail;
> + u8 freq_size;
> + u8 freq_pos;
> + u8 reg;
> + u8 en_bit;
> + bool en_invert;
> +};
> +
> +struct chip_desc {
> + struct clkout_cfg *clkout;
> + const char *clkout_name;
> + u8 sec_reg;
> + u8 alarm1_sec_reg;
> +
> + u8 int_en_reg;
> + u8 int_status_reg;
> +
> + u8 ram_reg;
> + u8 ram_size;
> +
> + u8 temp_reg;
> +
> + u8 trickle_reg;
> +};
> +
> +#define clk_hw_to_max313xx(_hw) container_of(_hw, struct max313xx, clkout)
> +
> +struct max313xx {
> + enum max313xx_ids id;
> + struct regmap *regmap;
> + struct rtc_device *rtc;
> + struct clk_hw clkout;
> + struct clk *clkin;
> + const struct chip_desc *chip;
> + int irqs[2];
> + int irq;
> +};
> +
> +static const int max313xx_clkin_freq[] = { 1, 50, 60, 32768 };
> +
> +static const int max31328_clkout_freq[] = { 1, 1024, 4096, 8192 };
> +static const int max31329_clkout_freq[] = { 1, 4096, 8192, 32768 };
> +static const int max3133x_clkout_freq[] = { 1, 64, 1024, 32768 };
> +static const int max31341_42_clkout_freq[] = { 1, 50, 60, 32768 };
> +static const int max31343_clkout_freq[] = { 1, 2, 4, 8, 16, 32, 64, 128, 32875 };
> +
> +static struct clkout_cfg max31328_clkout = {
> + .freq_avail = max31328_clkout_freq,
> + .freq_size = ARRAY_SIZE(max31328_clkout_freq),
> + .freq_pos = 3,
> + .reg = 0x0E,
> + .en_bit = BIT(3),
> + .en_invert = true,
> +};
> +
> +static struct clkout_cfg max31329_clkout = {
> + .freq_avail = max31329_clkout_freq,
> + .freq_size = ARRAY_SIZE(max31329_clkout_freq),
> + .freq_pos = 5,
> + .reg = 0x04,
> + .en_bit = BIT(7),
> +};
> +
> +static struct clkout_cfg max3133x_clkout = {
> + .freq_avail = max3133x_clkout_freq,
> + .freq_size = ARRAY_SIZE(max3133x_clkout_freq),
> + .freq_pos = 0,
> + .reg = 0x04,
> + .en_bit = BIT(2),
> +};
> +
> +static struct clkout_cfg max31341_42_clkout = {
> + .freq_avail = max31341_42_clkout_freq,
> + .freq_size = ARRAY_SIZE(max31341_42_clkout_freq),
> + .freq_pos = 1,
> + .reg = 0x00,
> + .en_bit = BIT(6),
> + .en_invert = true,
> +};
> +
> +static struct clkout_cfg max31343_clkout = {
> + .freq_avail = max31343_clkout_freq,
> + .freq_size = ARRAY_SIZE(max31343_clkout_freq),
> + .freq_pos = 3,
> + .reg = 0x04,
> + .en_bit = BIT(7),
> +};
> +
> +static const struct chip_desc chip[MAX313XX_ID_NR] = {
> + [ID_MAX31328] = {
> + .int_en_reg = 0x0E,
> + .int_status_reg = 0x0F,
> + .sec_reg = 0x00,
> + .alarm1_sec_reg = 0x07,
> + .temp_reg = 0x11,
> + .clkout = &max31328_clkout,
> + .clkout_name = "max31328-sqw",
> + },
> + [ID_MAX31329] = {
> + .int_en_reg = 0x01,
> + .int_status_reg = 0x00,
> + .sec_reg = 0x06,
> + .alarm1_sec_reg = 0x0D,
> + .ram_reg = 0x22,
> + .ram_size = 64,
> + .trickle_reg = 0x19,
> + .clkout = &max31329_clkout,
> + .clkout_name = "max31329-clkout",
> + },
> + [ID_MAX31331] = {
> + .int_en_reg = 0x01,
> + .int_status_reg = 0x00,
> + .sec_reg = 0x08,
> + .alarm1_sec_reg = 0x0F,
> + .ram_reg = 0x20,
> + .ram_size = 32,
> + .trickle_reg = 0x1B,
> + .clkout = &max3133x_clkout,
> + .clkout_name = "max31331-clkout",
> + },
> + [ID_MAX31334] = {
> + .int_en_reg = 0x01,
> + .int_status_reg = 0x00,
> + .sec_reg = 0x09,
> + .alarm1_sec_reg = 0x10,
> + .ram_reg = 0x30,
> + .ram_size = 32,
> + .trickle_reg = 0x1E,
> + .clkout = &max3133x_clkout,
> + .clkout_name = "max31334-clkout",
> + },
> + [ID_MAX31341] = {
> + .int_en_reg = 0x04,
> + .int_status_reg = 0x05,
> + .sec_reg = 0x06,
> + .alarm1_sec_reg = 0x0D,
> + .ram_reg = 0x16,
> + .ram_size = 64,
> + .trickle_reg = 0x57,
> + .clkout = &max31341_42_clkout,
> + .clkout_name = "max31341-clkout",
> + },
> + [ID_MAX31342] = {
> + .int_en_reg = 0x04,
> + .int_status_reg = 0x05,
> + .sec_reg = 0x06,
> + .alarm1_sec_reg = 0x0D,
> + .clkout = &max31341_42_clkout,
> + .clkout_name = "max31342-clkout",
> + },
> + [ID_MAX31343] = {
> + .int_en_reg = 0x01,
> + .int_status_reg = 0x00,
> + .sec_reg = 0x06,
> + .alarm1_sec_reg = 0x0D,
> + .ram_reg = 0x22,
> + .ram_size = 64,
> + .temp_reg = 0x1A,
> + .trickle_reg = 0x19,
> + .clkout = &max31343_clkout,
> + .clkout_name = "max31343-sqw",
> + },
> +};
> +
> +static const u32 max313xx_trickle_ohms[] = { 3000, 6000, 11000 };
> +
> +static bool max313xx_volatile_reg(struct device *dev, unsigned int reg)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + const struct chip_desc *chip = rtc->chip;
> +
> + /* time keeping registers */
> + if (reg >= chip->sec_reg && reg < chip->sec_reg + MAX313XX_TIME_SIZE)
> + return true;
> +
> + /* interrupt status register */
> + if (reg == chip->int_status_reg)
> + return true;
> +
> + /* temperature registers */
> + return chip->temp_reg &&
> + (reg == chip->temp_reg || reg == chip->temp_reg + 1);
> +}
> +
> +static const struct regmap_config regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .cache_type = REGCACHE_RBTREE,
> + .volatile_reg = max313xx_volatile_reg,
> +};
> +
> +static int max313xx_get_hour(u8 hour_reg)
> +{
> + int hour;
> +
> + /* 24Hr mode */
> + if (!FIELD_GET(MAX313XX_HRS_F_12_24, hour_reg))
> + return bcd2bin(hour_reg & 0x3f);
> +
> + /* 12Hr mode */
> + hour = bcd2bin(hour_reg & 0x1f);
> + if (hour == 12)
> + hour = 0;
> +
> + if (FIELD_GET(MAX313XX_HRS_F_AM_PM, hour_reg))
> + hour += 12;
> +
> + return hour;
> +}
> +
> +static int max313xx_read_time(struct device *dev, struct rtc_time *t)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + u8 regs[7];
> + int ret;
> +
> + ret = regmap_bulk_read(rtc->regmap, rtc->chip->sec_reg, regs, 7);
> + if (ret)
> + return ret;
> +
> + t->tm_sec = bcd2bin(regs[0] & 0x7f);
> + t->tm_min = bcd2bin(regs[1] & 0x7f);
> + t->tm_hour = max313xx_get_hour(regs[2]);
> + t->tm_wday = bcd2bin(regs[3] & 0x07) - 1;
> + t->tm_mday = bcd2bin(regs[4] & 0x3f);
> + t->tm_mon = bcd2bin(regs[5] & 0x1f) - 1;
> + t->tm_year = bcd2bin(regs[6]) + 100;
> +
> + if (FIELD_GET(MAX313XX_MONTH_CENTURY, regs[5]))
> + t->tm_year += 100;
> +
> + return 0;
> +}
> +
> +static int max313xx_set_time(struct device *dev, struct rtc_time *t)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + u8 regs[7];
> + int ret;
> +
> + regs[0] = bin2bcd(t->tm_sec);
> + regs[1] = bin2bcd(t->tm_min);
> + regs[2] = bin2bcd(t->tm_hour);
> + regs[3] = bin2bcd(t->tm_wday + 1);
> + regs[4] = bin2bcd(t->tm_mday);
> + regs[5] = bin2bcd(t->tm_mon + 1);
> + regs[6] = bin2bcd(t->tm_year % 100);
> +
> + if (t->tm_year >= 200)
> + regs[5] |= FIELD_PREP(MAX313XX_MONTH_CENTURY, 1);
> +
> + /* Clkin needs to be disabled before setting time. */
> + if (rtc->clkin) {
> + switch (rtc->id) {
> + case ID_MAX31341:
> + case ID_MAX31342:
> + ret = regmap_clear_bits(rtc->regmap,
> + MAX31341_42_CONFIG1_REG,
> + MAX31341_42_CONFIG1_CLKIN_EN);
> + break;
> + default:
> + ret = 0;
> + }
> + if (ret)
> + return ret;
> + }
> +
> + ret = regmap_bulk_write(rtc->regmap, rtc->chip->sec_reg, regs, 7);
> + if (ret)
> + return ret;
> +
> + switch (rtc->id) {
> + case ID_MAX31341:
> + case ID_MAX31342:
> + ret = regmap_set_bits(rtc->regmap, MAX3134X_CFG2_REG,
> + MAX3134X_CFG2_SET_RTC);
> + if (ret)
> + return ret;
> +
> + fsleep(10000);
> +
> + ret = regmap_clear_bits(rtc->regmap, MAX3134X_CFG2_REG,
> + MAX3134X_CFG2_SET_RTC);
> + if (ret)
> + return ret;
> +
> + if (rtc->clkin)
> + ret = regmap_set_bits(rtc->regmap,
> + MAX31341_42_CONFIG1_REG,
> + MAX31341_42_CONFIG1_CLKIN_EN);
> +
> + break;
> + default:
> + break;
> + }
> +
> + return ret;
> +}
> +
> +static int max313xx_read_alarm(struct device *dev, struct rtc_wkalrm *t)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + unsigned int status, int_en;
> + struct rtc_time time;
> + u8 regs[6];
> + int ret;
> +
> + ret = regmap_bulk_read(rtc->regmap, rtc->chip->alarm1_sec_reg, regs,
> + sizeof(regs));
> + if (ret)
> + return ret;
> +
> + t->time.tm_sec = bcd2bin(regs[0] & 0x7f);
> + t->time.tm_min = bcd2bin(regs[1] & 0x7f);
> + t->time.tm_hour = bcd2bin(regs[2] & 0x3f);
> + t->time.tm_mday = bcd2bin(regs[3] & 0x3f);
> + t->time.tm_mon = bcd2bin(regs[4] & 0x1f) - 1;
> + t->time.tm_year = bcd2bin(regs[5]) + 100;
> +
> + ret = max313xx_read_time(dev, &time);
> + if (ret)
> + return ret;
> +
> + if (time.tm_year >= 200)
> + t->time.tm_year += 100;
> +
> + ret = regmap_read(rtc->regmap, rtc->chip->int_status_reg, &status);
> + if (ret)
> + return ret;
> +
> + ret = regmap_read(rtc->regmap, rtc->chip->int_en_reg, &int_en);
> + if (ret)
> + return ret;
> +
> + t->enabled = FIELD_GET(MAX313XX_INT_ALARM1, int_en);
> + t->pending = FIELD_GET(MAX313XX_INT_ALARM1, status);
> +
> + return 0;
> +}
> +
> +static int max313xx_set_alarm(struct device *dev, struct rtc_wkalrm *t)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + unsigned int reg;
> + u8 regs[6];
> + int ret;
> +
> + regs[0] = bin2bcd(t->time.tm_sec);
> + regs[1] = bin2bcd(t->time.tm_min);
> + regs[2] = bin2bcd(t->time.tm_hour);
> + regs[3] = bin2bcd(t->time.tm_mday);
> + regs[4] = bin2bcd(t->time.tm_mon + 1);
> + regs[5] = bin2bcd(t->time.tm_year % 100);
> +
> + ret = regmap_bulk_write(rtc->regmap, rtc->chip->alarm1_sec_reg, regs,
> + sizeof(regs));
> + if (ret)
> + return ret;
> +
> + reg = FIELD_PREP(MAX313XX_INT_ALARM1, t->enabled);
> + ret = regmap_update_bits(rtc->regmap, rtc->chip->int_en_reg,
> + MAX313XX_INT_ALARM1 | MAX313XX_INT_ALARM2,
> + reg);
> + if (ret)
> + return ret;
> +
> + /* Clear status register */
> + return regmap_read(rtc->regmap, rtc->chip->int_status_reg, ®);
> +}
> +
> +static int max313xx_alarm_irq_enable(struct device *dev, unsigned int enabled)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> +
> + return regmap_update_bits(rtc->regmap, rtc->chip->int_en_reg,
> + MAX313XX_INT_ALARM1,
> + FIELD_PREP(MAX313XX_INT_ALARM1, enabled));
> +}
> +
> +static const struct rtc_class_ops max3133x_rtc_ops = {
> + .read_time = max313xx_read_time,
> + .set_time = max313xx_set_time,
> + .read_alarm = max313xx_read_alarm,
> + .set_alarm = max313xx_set_alarm,
> + .alarm_irq_enable = max313xx_alarm_irq_enable,
> +};
> +
> +static irqreturn_t max313xx_irq(int irq, void *dev_id)
> +{
> + struct max313xx *rtc = dev_id;
> + struct mutex *lock = &rtc->rtc->ops_lock;
> + int stat, ret;
> +
> + mutex_lock(lock);
> + ret = regmap_read(rtc->regmap, rtc->chip->int_status_reg, &stat);
> + if (ret)
> + goto out;
> +
> + if (FIELD_GET(MAX313XX_INT_ALARM1, stat)) {
> + ret = regmap_update_bits(rtc->regmap, rtc->chip->int_en_reg,
> + MAX313XX_INT_ALARM1, 0);
> + if (ret)
> + goto out;
> +
> + rtc_update_irq(rtc->rtc, 1, RTC_AF | RTC_IRQF);
> + }
> +
> +out:
> + mutex_unlock(lock);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int max313xx_nvmem_reg_read(void *priv, unsigned int offset,
> + void *val, size_t bytes)
> +{
> + struct max313xx *rtc = priv;
> + unsigned int reg = rtc->chip->ram_reg + offset;
> +
> + return regmap_bulk_read(rtc->regmap, reg, val, bytes);
> +}
> +
> +static int max313xx_nvmem_reg_write(void *priv, unsigned int offset,
> + void *val, size_t bytes)
> +{
> + struct max313xx *rtc = priv;
> + unsigned int reg = rtc->chip->ram_reg + offset;
> +
> + return regmap_bulk_write(rtc->regmap, reg, val, bytes);
> +}
> +
> +struct nvmem_config max313xx_nvmem_cfg = {
> + .reg_read = max313xx_nvmem_reg_read,
> + .reg_write = max313xx_nvmem_reg_write,
> + .word_size = 8,
> +};
> +
> +static unsigned long max313xx_clkout_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + struct max313xx *rtc = clk_hw_to_max313xx(hw);
> + const struct clkout_cfg *clkout = rtc->chip->clkout;
> + unsigned int freq_mask;
> + unsigned int reg;
> + int ret;
> +
> + ret = regmap_read(rtc->regmap, clkout->reg, ®);
> + if (ret)
> + return 0;
> +
> + freq_mask = __roundup_pow_of_two(clkout->freq_size) - 1;
> +
> + return clkout->freq_avail[(reg >> clkout->freq_pos) & freq_mask];
> +}
> +
> +static long max313xx_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long *prate)
> +{
> + struct max313xx *rtc = clk_hw_to_max313xx(hw);
> + struct clkout_cfg *clkout = rtc->chip->clkout;
> + int index;
> +
> + index = find_closest(rate, clkout->freq_avail, clkout->freq_size);
> + return clkout->freq_avail[index];
> +}
> +
> +static int max313xx_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long parent_rate)
> +{
> + struct max313xx *rtc = clk_hw_to_max313xx(hw);
> + struct clkout_cfg *clkout = rtc->chip->clkout;
> + unsigned int freq_mask;
> + int index;
> +
> + index = find_closest(rate, clkout->freq_avail, clkout->freq_size);
> + freq_mask = __roundup_pow_of_two(clkout->freq_size) - 1;
> +
> + return regmap_update_bits(rtc->regmap, clkout->reg,
> + freq_mask << clkout->freq_pos,
> + index << clkout->freq_pos);
> +}
> +
> +static int max313xx_clkout_enable(struct clk_hw *hw)
> +{
> + struct max313xx *rtc = clk_hw_to_max313xx(hw);
> + struct clkout_cfg *clkout = rtc->chip->clkout;
> +
> + if (clkout->en_invert)
> + return regmap_clear_bits(rtc->regmap, clkout->reg,
> + clkout->en_bit);
> +
> + return regmap_set_bits(rtc->regmap, clkout->reg, clkout->en_bit);
> +}
> +
> +static void max313xx_clkout_disable(struct clk_hw *hw)
> +{
> + struct max313xx *rtc = clk_hw_to_max313xx(hw);
> + struct clkout_cfg *clkout = rtc->chip->clkout;
> +
> + switch (rtc->id) {
> + case ID_MAX31331:
> + case ID_MAX31334:
> + if (rtc->irq > 0) {
> + dev_err(rtc->rtc->dev.parent,
> + "clkout cannot be disabled when IRQ is requested");
> + return;
> + }
> + break;
> + default:
> + break;
> + }
> +
> + if (clkout->en_invert)
> + regmap_set_bits(rtc->regmap, clkout->reg, clkout->en_bit);
> + else
> + regmap_clear_bits(rtc->regmap, clkout->reg, clkout->en_bit);
> +}
> +
> +static int max313xx_clkout_is_enabled(struct clk_hw *hw)
> +{
> + struct max313xx *rtc = clk_hw_to_max313xx(hw);
> + struct clkout_cfg *clkout = rtc->chip->clkout;
> + unsigned int reg;
> + int ret;
> +
> + ret = regmap_read(rtc->regmap, clkout->reg, ®);
> + if (ret)
> + return ret;
> +
> + return !!(reg & clkout->en_bit) ^ clkout->en_invert;
> +}
> +
> +static const struct clk_ops max313xx_clkout_ops = {
> + .recalc_rate = max313xx_clkout_recalc_rate,
> + .round_rate = max313xx_clkout_round_rate,
> + .set_rate = max313xx_clkout_set_rate,
> + .enable = max313xx_clkout_enable,
> + .disable = max313xx_clkout_disable,
> + .is_enabled = max313xx_clkout_is_enabled,
> +};
> +
> +struct clk_init_data max313xx_clk_init = {
> + .name = "max313xx-clkout",
> + .ops = &max313xx_clkout_ops,
> +};
> +
> +static int max313xx_read_temp(struct device *dev, enum hwmon_sensor_types type,
> + u32 attr, int channel, long *val)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + struct chip_desc desc = chip[rtc->id];
> + u8 reg[2];
> + s16 temp;
> + int ret;
> +
> + if (type != hwmon_temp || attr != hwmon_temp_input)
> + return -EOPNOTSUPP;
> +
> + ret = regmap_bulk_read(rtc->regmap, desc.temp_reg, reg, 2);
> + if (ret)
> + return ret;
> +
> + temp = get_unaligned_be16(reg);
> +
> + *val = (temp / 64) * 250;
> +
> + return 0;
> +}
> +
> +static umode_t max313xx_is_visible(const void *data,
> + enum hwmon_sensor_types type,
> + u32 attr, int channel)
> +{
> + if (type == hwmon_temp && attr == hwmon_temp_input)
> + return 0444;
> +
> + return 0;
> +}
> +
> +static const struct hwmon_channel_info *max313xx_info[] = {
> + HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT),
> + NULL
> +};
> +
> +static const struct hwmon_ops max313xx_hwmon_ops = {
> + .is_visible = max313xx_is_visible,
> + .read = max313xx_read_temp,
> +};
> +
> +static const struct hwmon_chip_info max313xx_chip_info = {
> + .ops = &max313xx_hwmon_ops,
> + .info = max313xx_info,
> +};
> +
> +static int max313xx_init(struct max313xx *rtc)
> +{
> + int ret;
> +
> + switch (rtc->id) {
> + case ID_MAX31341:
> + case ID_MAX31342:
> + ret = regmap_clear_bits(rtc->regmap, MAX31341_42_CONFIG1_REG,
> + MAX31341_42_CONFIG1_OSC_DISABLE);
> + if (ret)
> + return ret;
> +
> + return regmap_set_bits(rtc->regmap, MAX31341_42_CONFIG1_REG,
> + MAX31341_42_CONFIG1_SWRST);
> + default:
> + return 0;
> + }
> +}
> +
> +static int max313xx_clkout_register(struct device *dev)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + int ret;
> +
> + if (!device_property_present(dev, "#clock-cells"))
> + return 0;
> +
> + max313xx_clk_init.name = rtc->chip->clkout_name;
> + device_property_read_string(dev, "clock-output-names",
> + &max313xx_clk_init.name);
> + rtc->clkout.init = &max313xx_clk_init;
> +
> + ret = devm_clk_hw_register(dev, &rtc->clkout);
> + if (ret)
> + return dev_err_probe(dev, ret, "cannot register clock\n");
> +
> + return of_clk_add_provider(dev->of_node, of_clk_src_simple_get,
> + rtc->clkout.clk);
> +}
> +
> +static int max313xx_trickle_charger_setup(struct device *dev)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + bool diode_disable;
> + int index, reg;
> + u32 ohms = 0;
> + int ret;
> +
> + device_property_read_u32(dev, "trickle-resistor-ohms", &ohms);
> + if (!ohms)
> + return 0;
> +
> + diode_disable = device_property_read_bool(dev, "trickle-diode-disable");
> +
> + if (!rtc->chip->trickle_reg) {
> + dev_warn(dev, "device does not have trickle charger\n");
> + return 0;
> + }
> +
> + index = find_closest(ohms, max313xx_trickle_ohms,
> + ARRAY_SIZE(max313xx_trickle_ohms)) + 1;
> +
> + switch (rtc->id) {
> + case ID_MAX31329:
> + reg = FIELD_PREP(MAX31329_TRICKLE_ENABLE_BIT, 1) |
> + FIELD_PREP(MAX31329_43_TRICKLE_RES_MASK, index) |
> + FIELD_PREP(MAX31329_43_TRICKLE_DIODE_EN, !diode_disable);
> + break;
> + case ID_MAX31331:
> + case ID_MAX31334:
> + reg = FIELD_PREP(MAX3133X_TRICKLE_ENABLE_BIT, 1) |
> + FIELD_PREP(MAX3133X_TRICKLE_DIODE_EN, !diode_disable) |
> + FIELD_PREP(MAX3133X_TRICKLE_RES_MASK, index);
> + break;
> + case ID_MAX31341:
> + if (index == 1)
> + index = 0;
> + reg = FIELD_PREP(MAX31341_TRICKLE_ENABLE_BIT, 1) |
> + FIELD_PREP(MAX31341_TRICKLE_DIODE_EN, !diode_disable) |
> + FIELD_PREP(MAX31341_TRICKLE_RES_MASK, index);
> +
> + ret = regmap_set_bits(rtc->regmap, MAX31341_POWER_MGMT_REG,
> + MAX31341_POWER_MGMT_TRICKLE_BIT);
> + if (ret)
> + return ret;
> +
> + break;
> + case ID_MAX31343:
> + reg = FIELD_PREP(MAX31329_43_TRICKLE_RES_MASK, index) |
> + FIELD_PREP(MAX31329_43_TRICKLE_DIODE_EN, !diode_disable) |
> + FIELD_PREP(MAX31343_TRICKLE_ENABLE_MASK,
> + MAX31343_TRICKLE_ENABLE_CODE);
> + break;
> + default:
> + return -EOPNOTSUPP;
> + }
> +
> + return regmap_write(rtc->regmap, rtc->chip->trickle_reg, reg);
> +}
> +
> +static int max313xx_find_clkin_freq_index(struct clk *clk)
> +{
> + unsigned long rate = clk_get_rate(clk);
> + int freq;
> + int i;
> +
> + i = find_closest(rate, max313xx_clkin_freq,
> + ARRAY_SIZE(max313xx_clkin_freq));
> + if (max313xx_clkin_freq[i] == rate)
> + return i;
> +
> + for (i = ARRAY_SIZE(max313xx_clkin_freq) - 1; i >= 0; i--) {
> + freq = max313xx_clkin_freq[i];
> + if (freq == clk_round_rate(clk, freq))
> + return i;
> + }
> +
> + /* supplied clock cannot produce one of desired frequency rate */
> + return -ENODEV;
> +}
> +
> +static int max313xx_clkin_init(struct device *dev)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + int rate;
> + int ret;
> +
> + rtc->clkin = devm_clk_get_enabled(dev, NULL);
> + if (IS_ERR(rtc->clkin)) {
> + if (PTR_ERR(rtc->clkin) == -ENOENT)
> + rtc->clkin = NULL;
> + else
> + return dev_err_probe(dev, PTR_ERR(rtc->clkin),
> + "error while clkin setup\n");
> + }
> +
> + if (!rtc->clkin) {
> + switch (rtc->id) {
> + case ID_MAX31329:
> + return regmap_clear_bits(rtc->regmap,
> + MAX31329_CONFIG2_REG,
> + MAX31329_CONFIG2_CLKIN_EN);
> + case ID_MAX31341:
> + case ID_MAX31342:
> + return regmap_clear_bits(rtc->regmap,
> + MAX31341_42_CONFIG1_REG,
> + MAX31341_42_CONFIG1_CLKIN_EN);
> + default:
> + return 0;
> + }
> + }
> +
> + rate = max313xx_find_clkin_freq_index(rtc->clkin);
> + if (rate < 0)
> + return dev_err_probe(dev, rate,
> + "clkin cannot produce required frequency\n");
> +
> + ret = clk_set_rate(rtc->clkin, max313xx_clkin_freq[rate]);
> + if (ret)
> + return ret;
> +
> + switch (rtc->id) {
> + case ID_MAX31329:
> + ret = regmap_update_bits(rtc->regmap, MAX31329_CONFIG2_REG,
> + MAX31329_CONFIG2_CLKIN_FREQ, rate);
> + if (ret)
> + return ret;
> +
> + return regmap_set_bits(rtc->regmap, MAX31329_CONFIG2_REG,
> + MAX31329_CONFIG2_CLKIN_EN);
> + case ID_MAX31341:
> + case ID_MAX31342:
> + ret = regmap_update_bits(rtc->regmap, MAX31341_42_CONFIG1_REG,
> + MAX31341_42_CONFIG1_CLKIN_FREQ,
> + FIELD_PREP(MAX31341_42_CONFIG1_CLKIN_FREQ, rate));
> + if (ret)
> + return ret;
> +
> + return regmap_set_bits(rtc->regmap, MAX31341_42_CONFIG1_REG,
> + MAX31341_42_CONFIG1_CLKIN_EN);
> + default:
> + rtc->clkin = NULL;
> + dev_warn(dev, "device does not have clock input\n");
> + return 0;
> + }
> +}
> +
> +static int max313xx_irq_init(struct device *dev, const char *devname)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + bool wakeup;
> + int ret;
> +
> + rtc->irq = rtc->irqs[0];
> +
> + switch (rtc->id) {
> + case ID_MAX31328:
> + /* max31328 sqw ant int pin is shared */
> + if (rtc->id == ID_MAX31328 && rtc->irq > 0 && rtc->clkout.clk)
> + return dev_err_probe(dev, -EOPNOTSUPP,
> + "cannot have both sqw clock output and irq enabled");
> +
> + break;
> + case ID_MAX31331:
> + case ID_MAX31334:
> + if (rtc->clkout.clk) {
> + /* clockout needs to be enabled for using INTA pin */
> + ret = clk_prepare_enable(rtc->clkout.clk);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "cannot enable clkout\n");
> + } else {
> + rtc->irq = rtc->irqs[1];
> + }
> + break;
> + default:
> + if (rtc->clkin) {
> + rtc->irq = rtc->irqs[1];
> +
> + /* wrong interrupt specified */
> + if (rtc->irqs[0] > 0 && rtc->irqs[1] <= 0)
> + dev_warn(dev, "INTA is specified but INTB required for irq when clkin is enabled\n");
> +
> + if (rtc->clkout.clk && rtc->irq > 0)
> + return dev_err_probe(dev, -EOPNOTSUPP,
> + "irq not possible when both clkin and clkout are configured\n");
> +
> + if (rtc->irq <= 0)
> + break;
> +
> + /* clkout needs to be disabled for using INTB pin */
> + if (rtc->chip->clkout->en_invert)
> + ret = regmap_set_bits(rtc->regmap,
> + rtc->chip->clkout->reg,
> + rtc->chip->clkout->en_bit);
> + else
> + ret = regmap_clear_bits(rtc->regmap,
> + rtc->chip->clkout->reg,
> + rtc->chip->clkout->en_bit);
> +
> + if (ret)
> + return ret;
> + }
> + break;
> + }
> +
> + if (rtc->irq > 0) {
> + ret = devm_request_threaded_irq(dev, rtc->irq, NULL,
> + &max313xx_irq, IRQF_ONESHOT,
> + devname, rtc);
> + if (ret)
> + return ret;
> +
> + wakeup = device_property_read_bool(dev, "wakeup-source");
> + return device_init_wakeup(dev, wakeup);
> + }
> +
> + __clear_bit(RTC_FEATURE_ALARM, rtc->rtc->features);
> +
> + return 0;
> +}
> +
> +static int max313xx_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct device *dev = &client->dev;
> + struct max313xx *max313xx;
> + struct device *hwmon;
> + const void *match;
> + int ret;
> +
> + max313xx = devm_kzalloc(&client->dev, sizeof(*max313xx), GFP_KERNEL);
> + if (!max313xx)
> + return -ENOMEM;
> +
> + dev_set_drvdata(&client->dev, max313xx);
> +
> + max313xx->regmap = devm_regmap_init_i2c(client, ®map_config);
> + if (IS_ERR(max313xx->regmap)) {
> + return dev_err_probe(dev, PTR_ERR(max313xx->regmap),
> + "regmap init failed\n");
> + }
> +
> + i2c_set_clientdata(client, max313xx);
> +
> + match = device_get_match_data(dev);
> + if (match)
> + max313xx->id = (enum max313xx_ids)match;
> + else if (id)
> + max313xx->id = id->driver_data;
> + else
> + return -ENODEV;
> +
> + max313xx->chip = &chip[max313xx->id];
> +
> + ret = max313xx_init(max313xx);
> + if (ret)
> + return ret;
> +
> + max313xx->rtc = devm_rtc_allocate_device(dev);
> + if (IS_ERR(max313xx->rtc))
> + return PTR_ERR(max313xx->rtc);
> +
> + max313xx->rtc->ops = &max3133x_rtc_ops;
> + max313xx->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
> + max313xx->rtc->range_max = RTC_TIMESTAMP_END_2199;
> +
> + ret = devm_rtc_register_device(max313xx->rtc);
> + if (ret)
> + return ret;
> +
> + switch (max313xx->id) {
> + case ID_MAX31328:
> + case ID_MAX31343:
> + max313xx->irqs[0] = client->irq;
> + break;
> + default:
> + max313xx->irqs[0] = fwnode_irq_get_byname(dev_fwnode(dev), "INTA");
> + max313xx->irqs[1] = fwnode_irq_get_byname(dev_fwnode(dev), "INTB");
> + if (max313xx->irqs[0] <= 0 && max313xx->irqs[1] <= 0 && client->irq)
> + return dev_err_probe(dev, -ENOENT,
> + "interrupt requested but no interrupt name specified\n");
> +
> + break;
> + }
> +
> + ret = max313xx_clkout_register(dev);
> + if (ret)
> + return ret;
> +
> + ret = max313xx_clkin_init(dev);
> + if (ret)
> + return ret;
> +
> + /* IRQ wiring depends on the clock configuration so parse them first */
> + ret = max313xx_irq_init(dev, client->name);
> + if (ret)
> + return ret;
> +
> + if (max313xx->chip->ram_size) {
> + max313xx_nvmem_cfg.size = max313xx->chip->ram_size;
> + max313xx_nvmem_cfg.priv = max313xx;
> +
> + ret = devm_rtc_nvmem_register(max313xx->rtc, &max313xx_nvmem_cfg);
> + if (ret)
> + dev_warn(dev, "cannot register rtc nvmem\n");
> + }
> +
> + if (max313xx->chip->temp_reg) {
> + hwmon = devm_hwmon_device_register_with_info(dev, client->name,
> + max313xx,
> + &max313xx_chip_info,
> + NULL);
> + if (IS_ERR(hwmon))
> + dev_warn(dev, "cannot register hwmon device: %li\n",
> + PTR_ERR(hwmon));
> + }
> +
> + return max313xx_trickle_charger_setup(dev);
> +}
> +
> +static const struct of_device_id max313xx_of_id[] = {
> + { .compatible = "adi,max31328", .data = (void *)ID_MAX31328 },
> + { .compatible = "adi,max31329", .data = (void *)ID_MAX31329 },
> + { .compatible = "adi,max31331", .data = (void *)ID_MAX31331 },
> + { .compatible = "adi,max31334", .data = (void *)ID_MAX31334 },
> + { .compatible = "adi,max31341", .data = (void *)ID_MAX31341 },
> + { .compatible = "adi,max31342", .data = (void *)ID_MAX31342 },
> + { .compatible = "adi,max31343", .data = (void *)ID_MAX31343 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, max313xx_of_id);
> +
> +static const struct i2c_device_id max313xx_id[] = {
> + { "max31328", ID_MAX31328 },
> + { "max31329", ID_MAX31329 },
> + { "max31331", ID_MAX31331 },
> + { "max31334", ID_MAX31334 },
> + { "max31341", ID_MAX31341 },
> + { "max31342", ID_MAX31342 },
> + { "max31343", ID_MAX31343 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, max313xx_id);
> +
> +static struct i2c_driver max313xx_driver = {
> + .driver = {
> + .name = "rtc-max313xx",
> + .of_match_table = max313xx_of_id,
> + },
> + .probe = max313xx_probe,
> + .id_table = max313xx_id,
> +};
> +module_i2c_driver(max313xx_driver);
> +
> +MODULE_DESCRIPTION("Analog Devices MAX313XX RTCs");
> +MODULE_AUTHOR("Zeynep Arslanbenzer <Zeynep.Arslanbenzer@analog.com>");
> +MODULE_AUTHOR("Ibrahim Tilki <Ibrahim.Tilki@analog.com>");
> +MODULE_SOFTDEP("pre: regmap-i2c");
> +MODULE_LICENSE("GPL");
> +MODULE_VERSION("1.0");
> --
> 2.25.1
>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v3 1/2] drivers: rtc: add max313xx series rtc driver
2022-11-08 12:22 ` [PATCH v3 1/2] " Ibrahim Tilki
2022-11-08 12:57 ` Christophe JAILLET
2022-11-08 13:27 ` Guenter Roeck
@ 2022-12-10 22:01 ` Alexandre Belloni
2023-02-14 20:28 ` Chris Packham
3 siblings, 0 replies; 14+ messages in thread
From: Alexandre Belloni @ 2022-12-10 22:01 UTC (permalink / raw)
To: Ibrahim Tilki
Cc: a.zummo, jdelvare, linux, robh+dt, krzysztof.kozlowski+dt,
linux-rtc, linux-kernel, linux-hwmon, devicetree,
Zeynep Arslanbenzer
On 08/11/2022 15:22:53+0300, Ibrahim Tilki wrote:
> +static int max313xx_trickle_charger_setup(struct device *dev)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + bool diode_disable;
> + int index, reg;
> + u32 ohms = 0;
> + int ret;
> +
> + device_property_read_u32(dev, "trickle-resistor-ohms", &ohms);
> + if (!ohms)
> + return 0;
> +
> + diode_disable = device_property_read_bool(dev, "trickle-diode-disable");
This property is deprecated, please do not add a new user.
> +static int max313xx_irq_init(struct device *dev, const char *devname)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + bool wakeup;
> + int ret;
> +
> + rtc->irq = rtc->irqs[0];
> +
> + switch (rtc->id) {
> + case ID_MAX31328:
> + /* max31328 sqw ant int pin is shared */
> + if (rtc->id == ID_MAX31328 && rtc->irq > 0 && rtc->clkout.clk)
> + return dev_err_probe(dev, -EOPNOTSUPP,
> + "cannot have both sqw clock output and irq enabled");
> +
> + break;
> + case ID_MAX31331:
> + case ID_MAX31334:
> + if (rtc->clkout.clk) {
> + /* clockout needs to be enabled for using INTA pin */
> + ret = clk_prepare_enable(rtc->clkout.clk);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "cannot enable clkout\n");
> + } else {
> + rtc->irq = rtc->irqs[1];
> + }
> + break;
> + default:
> + if (rtc->clkin) {
> + rtc->irq = rtc->irqs[1];
> +
> + /* wrong interrupt specified */
> + if (rtc->irqs[0] > 0 && rtc->irqs[1] <= 0)
> + dev_warn(dev, "INTA is specified but INTB required for irq when clkin is enabled\n");
> +
> + if (rtc->clkout.clk && rtc->irq > 0)
> + return dev_err_probe(dev, -EOPNOTSUPP,
> + "irq not possible when both clkin and clkout are configured\n");
> +
> + if (rtc->irq <= 0)
> + break;
> +
> + /* clkout needs to be disabled for using INTB pin */
> + if (rtc->chip->clkout->en_invert)
> + ret = regmap_set_bits(rtc->regmap,
> + rtc->chip->clkout->reg,
> + rtc->chip->clkout->en_bit);
> + else
> + ret = regmap_clear_bits(rtc->regmap,
> + rtc->chip->clkout->reg,
> + rtc->chip->clkout->en_bit);
> +
> + if (ret)
> + return ret;
> + }
> + break;
> + }
I really don't like this logic that relies on interrupt-names.
interrupt-names has to be optional and the interrupt position is
meaningful. You are doing/enforcing pinmuxing on this property which
should really not be done. what you need is rather properties
explicitly telling what is muxed to INTA and INTB.
Your current logic enforces clkout on INTB which may not be what a user
wants.
> +
> + if (rtc->irq > 0) {
> + ret = devm_request_threaded_irq(dev, rtc->irq, NULL,
> + &max313xx_irq, IRQF_ONESHOT,
> + devname, rtc);
> + if (ret)
> + return ret;
> +
> + wakeup = device_property_read_bool(dev, "wakeup-source");
wakeup-source is only needed when you don't have an interrupt. If an
interrupt is present, it is assumed it is able to wakeup.
> + return device_init_wakeup(dev, wakeup);
> + }
> +
> + __clear_bit(RTC_FEATURE_ALARM, rtc->rtc->features);
> +
> + return 0;
> +}
> +
> +static int max313xx_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct device *dev = &client->dev;
> + struct max313xx *max313xx;
> + struct device *hwmon;
> + const void *match;
> + int ret;
> +
> + max313xx = devm_kzalloc(&client->dev, sizeof(*max313xx), GFP_KERNEL);
> + if (!max313xx)
> + return -ENOMEM;
> +
> + dev_set_drvdata(&client->dev, max313xx);
> +
> + max313xx->regmap = devm_regmap_init_i2c(client, ®map_config);
> + if (IS_ERR(max313xx->regmap)) {
> + return dev_err_probe(dev, PTR_ERR(max313xx->regmap),
> + "regmap init failed\n");
> + }
> +
> + i2c_set_clientdata(client, max313xx);
> +
> + match = device_get_match_data(dev);
> + if (match)
> + max313xx->id = (enum max313xx_ids)match;
> + else if (id)
> + max313xx->id = id->driver_data;
> + else
> + return -ENODEV;
> +
> + max313xx->chip = &chip[max313xx->id];
> +
> + ret = max313xx_init(max313xx);
> + if (ret)
> + return ret;
> +
> + max313xx->rtc = devm_rtc_allocate_device(dev);
> + if (IS_ERR(max313xx->rtc))
> + return PTR_ERR(max313xx->rtc);
> +
> + max313xx->rtc->ops = &max3133x_rtc_ops;
> + max313xx->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
> + max313xx->rtc->range_max = RTC_TIMESTAMP_END_2199;
> +
> + ret = devm_rtc_register_device(max313xx->rtc);
> + if (ret)
> + return ret;
> +
> + switch (max313xx->id) {
> + case ID_MAX31328:
> + case ID_MAX31343:
> + max313xx->irqs[0] = client->irq;
> + break;
> + default:
> + max313xx->irqs[0] = fwnode_irq_get_byname(dev_fwnode(dev), "INTA");
> + max313xx->irqs[1] = fwnode_irq_get_byname(dev_fwnode(dev), "INTB");
> + if (max313xx->irqs[0] <= 0 && max313xx->irqs[1] <= 0 && client->irq)
> + return dev_err_probe(dev, -ENOENT,
> + "interrupt requested but no interrupt name specified\n");
> +
> + break;
> + }
> +
> + ret = max313xx_clkout_register(dev);
> + if (ret)
> + return ret;
> +
> + ret = max313xx_clkin_init(dev);
> + if (ret)
> + return ret;
> +
> + /* IRQ wiring depends on the clock configuration so parse them first */
> + ret = max313xx_irq_init(dev, client->name);
> + if (ret)
> + return ret;
> +
> + if (max313xx->chip->ram_size) {
> + max313xx_nvmem_cfg.size = max313xx->chip->ram_size;
> + max313xx_nvmem_cfg.priv = max313xx;
> +
> + ret = devm_rtc_nvmem_register(max313xx->rtc, &max313xx_nvmem_cfg);
> + if (ret)
> + dev_warn(dev, "cannot register rtc nvmem\n");
> + }
> +
> + if (max313xx->chip->temp_reg) {
> + hwmon = devm_hwmon_device_register_with_info(dev, client->name,
> + max313xx,
> + &max313xx_chip_info,
> + NULL);
> + if (IS_ERR(hwmon))
> + dev_warn(dev, "cannot register hwmon device: %li\n",
> + PTR_ERR(hwmon));
> + }
> +
> + return max313xx_trickle_charger_setup(dev);
> +}
> +
> +static const struct of_device_id max313xx_of_id[] = {
> + { .compatible = "adi,max31328", .data = (void *)ID_MAX31328 },
> + { .compatible = "adi,max31329", .data = (void *)ID_MAX31329 },
> + { .compatible = "adi,max31331", .data = (void *)ID_MAX31331 },
> + { .compatible = "adi,max31334", .data = (void *)ID_MAX31334 },
> + { .compatible = "adi,max31341", .data = (void *)ID_MAX31341 },
> + { .compatible = "adi,max31342", .data = (void *)ID_MAX31342 },
> + { .compatible = "adi,max31343", .data = (void *)ID_MAX31343 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, max313xx_of_id);
> +
> +static const struct i2c_device_id max313xx_id[] = {
> + { "max31328", ID_MAX31328 },
> + { "max31329", ID_MAX31329 },
> + { "max31331", ID_MAX31331 },
> + { "max31334", ID_MAX31334 },
> + { "max31341", ID_MAX31341 },
> + { "max31342", ID_MAX31342 },
> + { "max31343", ID_MAX31343 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, max313xx_id);
> +
> +static struct i2c_driver max313xx_driver = {
> + .driver = {
> + .name = "rtc-max313xx",
> + .of_match_table = max313xx_of_id,
> + },
> + .probe = max313xx_probe,
> + .id_table = max313xx_id,
> +};
> +module_i2c_driver(max313xx_driver);
> +
> +MODULE_DESCRIPTION("Analog Devices MAX313XX RTCs");
> +MODULE_AUTHOR("Zeynep Arslanbenzer <Zeynep.Arslanbenzer@analog.com>");
> +MODULE_AUTHOR("Ibrahim Tilki <Ibrahim.Tilki@analog.com>");
> +MODULE_SOFTDEP("pre: regmap-i2c");
> +MODULE_LICENSE("GPL");
> +MODULE_VERSION("1.0");
> --
> 2.25.1
>
--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v3 1/2] drivers: rtc: add max313xx series rtc driver
2022-11-08 12:22 ` [PATCH v3 1/2] " Ibrahim Tilki
` (2 preceding siblings ...)
2022-12-10 22:01 ` Alexandre Belloni
@ 2023-02-14 20:28 ` Chris Packham
2023-02-14 21:40 ` Alexandre Belloni
2023-02-17 15:17 ` Tilki, Ibrahim
3 siblings, 2 replies; 14+ messages in thread
From: Chris Packham @ 2023-02-14 20:28 UTC (permalink / raw)
To: Ibrahim Tilki, a.zummo, alexandre.belloni, jdelvare, linux,
robh+dt, krzysztof.kozlowski+dt
Cc: linux-rtc, linux-kernel, linux-hwmon, devicetree, Zeynep Arslanbenzer
Hi Ibrahim,
On 9/11/22 01:22, Ibrahim Tilki wrote:
> Adding support for Analog Devices MAX313XX series RTCs.
>
> Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki@analog.com>
> Signed-off-by: Zeynep Arslanbenzer <Zeynep.Arslanbenzer@analog.com>
> ---
> drivers/rtc/Kconfig | 11 +
> drivers/rtc/Makefile | 1 +
> drivers/rtc/rtc-max313xx.c | 1070 ++++++++++++++++++++++++++++++++++++
> 3 files changed, 1082 insertions(+)
> create mode 100644 drivers/rtc/rtc-max313xx.c
What is the current state of this work? I see there are some comments on
this v3 iteration from late last year and I couldn't find any newer
iteration on any mailing list. We've got some new hardware arriving soon
that will have the MAX31331 RTC and I'm keen to see this patch series
land. Is there anything I can do to help it along? I can't be very
specific about when I'll see the new hardware (who can these days), the
last update was "boards are due in March".
For the maintainers on the Cc list once the dust settles how would I get
this supported in a LTS kernel (we're currently using the 5.15 series)?
Or is totally out of the question because it's not just a new device id?
> diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
> index b8de25118..71ea390dc 100644
> --- a/drivers/rtc/Kconfig
> +++ b/drivers/rtc/Kconfig
> @@ -323,6 +323,17 @@ config RTC_DRV_LP8788
> help
> Say Y to enable support for the LP8788 RTC/ALARM driver.
>
> +config RTC_DRV_MAX313XX
> + tristate "Analog Devices MAX313XX RTC driver"
> + depends on I2C
> + select REGMAP_I2C
> + help
> + If you say yes here you will get support for the
> + Analog Devices MAX313XX series RTC family.
> +
> + This driver can also be built as a module. If so, the module
> + will be called rtc-max313xx.
> +
> config RTC_DRV_MAX6900
> tristate "Maxim MAX6900"
> help
> diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
> index aab22bc63..3d1aab897 100644
> --- a/drivers/rtc/Makefile
> +++ b/drivers/rtc/Makefile
> @@ -89,6 +89,7 @@ obj-$(CONFIG_RTC_DRV_M41T94) += rtc-m41t94.o
> obj-$(CONFIG_RTC_DRV_M48T35) += rtc-m48t35.o
> obj-$(CONFIG_RTC_DRV_M48T59) += rtc-m48t59.o
> obj-$(CONFIG_RTC_DRV_M48T86) += rtc-m48t86.o
> +obj-$(CONFIG_RTC_DRV_MAX313XX) += rtc-max313xx.o
> obj-$(CONFIG_RTC_DRV_MAX6900) += rtc-max6900.o
> obj-$(CONFIG_RTC_DRV_MAX6902) += rtc-max6902.o
> obj-$(CONFIG_RTC_DRV_MAX6916) += rtc-max6916.o
> diff --git a/drivers/rtc/rtc-max313xx.c b/drivers/rtc/rtc-max313xx.c
> new file mode 100644
> index 000000000..b1f7ab189
> --- /dev/null
> +++ b/drivers/rtc/rtc-max313xx.c
> @@ -0,0 +1,1070 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Analog Devices MAX313XX series I2C RTC driver
> + *
> + * Copyright 2022 Analog Devices Inc.
> + */
> +#include <asm-generic/unaligned.h>
> +#include <linux/bcd.h>
> +#include <linux/bitfield.h>
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/hwmon.h>
> +#include <linux/i2c.h>
> +#include <linux/regmap.h>
> +#include <linux/rtc.h>
> +#include <linux/util_macros.h>
> +
> +/* common registers */
> +#define MAX313XX_INT_ALARM1 BIT(0)
> +#define MAX313XX_INT_ALARM2 BIT(1)
> +#define MAX313XX_HRS_F_12_24 BIT(6)
> +#define MAX313XX_HRS_F_AM_PM BIT(5)
> +#define MAX313XX_MONTH_CENTURY BIT(7)
> +
> +#define MAX313XX_TMR_CFG_ENABLE BIT(4)
> +#define MAX313XX_TMR_CFG_FREQ_MASK GENMASK(1, 0)
> +#define MAX313XX_TMR_CFG_FREQ_16HZ 0x03
> +
> +#define MAX313XX_REG_MINUTE 0x01
> +#define MAX313XX_REG_HOUR 0x02
> +
> +#define MAX313XX_TIME_SIZE 0x07
> +
> +/* device specific registers */
> +#define MAX3134X_CFG2_REG 0x01
> +#define MAX3134X_CFG2_SET_RTC BIT(1)
> +
> +#define MAX31341_TRICKLE_RES_MASK GENMASK(1, 0)
> +#define MAX31341_TRICKLE_DIODE_EN BIT(2)
> +#define MAX31341_TRICKLE_ENABLE_BIT BIT(3)
> +#define MAX31341_POWER_MGMT_REG 0x56
> +#define MAX31341_POWER_MGMT_TRICKLE_BIT BIT(0)
> +
> +#define MAX3133X_TRICKLE_RES_MASK GENMASK(2, 1)
> +#define MAX3133X_TRICKLE_DIODE_EN BIT(3)
> +#define MAX3133X_TRICKLE_ENABLE_BIT BIT(0)
> +
> +#define MAX31329_TRICKLE_ENABLE_BIT BIT(7)
> +#define MAX31343_TRICKLE_ENABLE_MASK GENMASK(7, 4)
> +#define MAX31343_TRICKLE_ENABLE_CODE 5
> +#define MAX31329_43_TRICKLE_RES_MASK GENMASK(1, 0)
> +#define MAX31329_43_TRICKLE_DIODE_EN BIT(2)
> +
> +#define MAX31329_CONFIG2_REG 0x04
> +#define MAX31329_CONFIG2_CLKIN_EN BIT(2)
> +#define MAX31329_CONFIG2_CLKIN_FREQ GENMASK(1, 0)
> +
> +#define MAX31341_42_CONFIG1_REG 0x00
> +#define MAX31341_42_CONFIG1_CLKIN_EN BIT(7)
> +#define MAX31341_42_CONFIG1_CLKIN_FREQ GENMASK(5, 4)
> +#define MAX31341_42_CONFIG1_OSC_DISABLE BIT(3)
> +#define MAX31341_42_CONFIG1_SWRST BIT(0)
> +
> +enum max313xx_ids {
> + ID_MAX31328,
> + ID_MAX31329,
> + ID_MAX31331,
> + ID_MAX31334,
> + ID_MAX31341,
> + ID_MAX31342,
> + ID_MAX31343,
> + MAX313XX_ID_NR
> +};
> +
> +struct clkout_cfg {
> + const int *freq_avail;
> + u8 freq_size;
> + u8 freq_pos;
> + u8 reg;
> + u8 en_bit;
> + bool en_invert;
> +};
> +
> +struct chip_desc {
> + struct clkout_cfg *clkout;
> + const char *clkout_name;
> + u8 sec_reg;
> + u8 alarm1_sec_reg;
> +
> + u8 int_en_reg;
> + u8 int_status_reg;
> +
> + u8 ram_reg;
> + u8 ram_size;
> +
> + u8 temp_reg;
> +
> + u8 trickle_reg;
> +};
> +
> +#define clk_hw_to_max313xx(_hw) container_of(_hw, struct max313xx, clkout)
> +
> +struct max313xx {
> + enum max313xx_ids id;
> + struct regmap *regmap;
> + struct rtc_device *rtc;
> + struct clk_hw clkout;
> + struct clk *clkin;
> + const struct chip_desc *chip;
> + int irqs[2];
> + int irq;
> +};
> +
> +static const int max313xx_clkin_freq[] = { 1, 50, 60, 32768 };
> +
> +static const int max31328_clkout_freq[] = { 1, 1024, 4096, 8192 };
> +static const int max31329_clkout_freq[] = { 1, 4096, 8192, 32768 };
> +static const int max3133x_clkout_freq[] = { 1, 64, 1024, 32768 };
> +static const int max31341_42_clkout_freq[] = { 1, 50, 60, 32768 };
> +static const int max31343_clkout_freq[] = { 1, 2, 4, 8, 16, 32, 64, 128, 32875 };
> +
> +static struct clkout_cfg max31328_clkout = {
> + .freq_avail = max31328_clkout_freq,
> + .freq_size = ARRAY_SIZE(max31328_clkout_freq),
> + .freq_pos = 3,
> + .reg = 0x0E,
> + .en_bit = BIT(3),
> + .en_invert = true,
> +};
> +
> +static struct clkout_cfg max31329_clkout = {
> + .freq_avail = max31329_clkout_freq,
> + .freq_size = ARRAY_SIZE(max31329_clkout_freq),
> + .freq_pos = 5,
> + .reg = 0x04,
> + .en_bit = BIT(7),
> +};
> +
> +static struct clkout_cfg max3133x_clkout = {
> + .freq_avail = max3133x_clkout_freq,
> + .freq_size = ARRAY_SIZE(max3133x_clkout_freq),
> + .freq_pos = 0,
> + .reg = 0x04,
> + .en_bit = BIT(2),
> +};
> +
> +static struct clkout_cfg max31341_42_clkout = {
> + .freq_avail = max31341_42_clkout_freq,
> + .freq_size = ARRAY_SIZE(max31341_42_clkout_freq),
> + .freq_pos = 1,
> + .reg = 0x00,
> + .en_bit = BIT(6),
> + .en_invert = true,
> +};
> +
> +static struct clkout_cfg max31343_clkout = {
> + .freq_avail = max31343_clkout_freq,
> + .freq_size = ARRAY_SIZE(max31343_clkout_freq),
> + .freq_pos = 3,
> + .reg = 0x04,
> + .en_bit = BIT(7),
> +};
> +
> +static const struct chip_desc chip[MAX313XX_ID_NR] = {
> + [ID_MAX31328] = {
> + .int_en_reg = 0x0E,
> + .int_status_reg = 0x0F,
> + .sec_reg = 0x00,
> + .alarm1_sec_reg = 0x07,
> + .temp_reg = 0x11,
> + .clkout = &max31328_clkout,
> + .clkout_name = "max31328-sqw",
> + },
> + [ID_MAX31329] = {
> + .int_en_reg = 0x01,
> + .int_status_reg = 0x00,
> + .sec_reg = 0x06,
> + .alarm1_sec_reg = 0x0D,
> + .ram_reg = 0x22,
> + .ram_size = 64,
> + .trickle_reg = 0x19,
> + .clkout = &max31329_clkout,
> + .clkout_name = "max31329-clkout",
> + },
> + [ID_MAX31331] = {
> + .int_en_reg = 0x01,
> + .int_status_reg = 0x00,
> + .sec_reg = 0x08,
> + .alarm1_sec_reg = 0x0F,
> + .ram_reg = 0x20,
> + .ram_size = 32,
> + .trickle_reg = 0x1B,
> + .clkout = &max3133x_clkout,
> + .clkout_name = "max31331-clkout",
> + },
> + [ID_MAX31334] = {
> + .int_en_reg = 0x01,
> + .int_status_reg = 0x00,
> + .sec_reg = 0x09,
> + .alarm1_sec_reg = 0x10,
> + .ram_reg = 0x30,
> + .ram_size = 32,
> + .trickle_reg = 0x1E,
> + .clkout = &max3133x_clkout,
> + .clkout_name = "max31334-clkout",
> + },
> + [ID_MAX31341] = {
> + .int_en_reg = 0x04,
> + .int_status_reg = 0x05,
> + .sec_reg = 0x06,
> + .alarm1_sec_reg = 0x0D,
> + .ram_reg = 0x16,
> + .ram_size = 64,
> + .trickle_reg = 0x57,
> + .clkout = &max31341_42_clkout,
> + .clkout_name = "max31341-clkout",
> + },
> + [ID_MAX31342] = {
> + .int_en_reg = 0x04,
> + .int_status_reg = 0x05,
> + .sec_reg = 0x06,
> + .alarm1_sec_reg = 0x0D,
> + .clkout = &max31341_42_clkout,
> + .clkout_name = "max31342-clkout",
> + },
> + [ID_MAX31343] = {
> + .int_en_reg = 0x01,
> + .int_status_reg = 0x00,
> + .sec_reg = 0x06,
> + .alarm1_sec_reg = 0x0D,
> + .ram_reg = 0x22,
> + .ram_size = 64,
> + .temp_reg = 0x1A,
> + .trickle_reg = 0x19,
> + .clkout = &max31343_clkout,
> + .clkout_name = "max31343-sqw",
> + },
> +};
> +
> +static const u32 max313xx_trickle_ohms[] = { 3000, 6000, 11000 };
> +
> +static bool max313xx_volatile_reg(struct device *dev, unsigned int reg)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + const struct chip_desc *chip = rtc->chip;
> +
> + /* time keeping registers */
> + if (reg >= chip->sec_reg && reg < chip->sec_reg + MAX313XX_TIME_SIZE)
> + return true;
> +
> + /* interrupt status register */
> + if (reg == chip->int_status_reg)
> + return true;
> +
> + /* temperature registers */
> + return chip->temp_reg &&
> + (reg == chip->temp_reg || reg == chip->temp_reg + 1);
> +}
> +
> +static const struct regmap_config regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .cache_type = REGCACHE_RBTREE,
> + .volatile_reg = max313xx_volatile_reg,
> +};
> +
> +static int max313xx_get_hour(u8 hour_reg)
> +{
> + int hour;
> +
> + /* 24Hr mode */
> + if (!FIELD_GET(MAX313XX_HRS_F_12_24, hour_reg))
> + return bcd2bin(hour_reg & 0x3f);
> +
> + /* 12Hr mode */
> + hour = bcd2bin(hour_reg & 0x1f);
> + if (hour == 12)
> + hour = 0;
> +
> + if (FIELD_GET(MAX313XX_HRS_F_AM_PM, hour_reg))
> + hour += 12;
> +
> + return hour;
> +}
> +
> +static int max313xx_read_time(struct device *dev, struct rtc_time *t)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + u8 regs[7];
> + int ret;
> +
> + ret = regmap_bulk_read(rtc->regmap, rtc->chip->sec_reg, regs, 7);
> + if (ret)
> + return ret;
> +
> + t->tm_sec = bcd2bin(regs[0] & 0x7f);
> + t->tm_min = bcd2bin(regs[1] & 0x7f);
> + t->tm_hour = max313xx_get_hour(regs[2]);
> + t->tm_wday = bcd2bin(regs[3] & 0x07) - 1;
> + t->tm_mday = bcd2bin(regs[4] & 0x3f);
> + t->tm_mon = bcd2bin(regs[5] & 0x1f) - 1;
> + t->tm_year = bcd2bin(regs[6]) + 100;
> +
> + if (FIELD_GET(MAX313XX_MONTH_CENTURY, regs[5]))
> + t->tm_year += 100;
> +
> + return 0;
> +}
> +
> +static int max313xx_set_time(struct device *dev, struct rtc_time *t)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + u8 regs[7];
> + int ret;
> +
> + regs[0] = bin2bcd(t->tm_sec);
> + regs[1] = bin2bcd(t->tm_min);
> + regs[2] = bin2bcd(t->tm_hour);
> + regs[3] = bin2bcd(t->tm_wday + 1);
> + regs[4] = bin2bcd(t->tm_mday);
> + regs[5] = bin2bcd(t->tm_mon + 1);
> + regs[6] = bin2bcd(t->tm_year % 100);
> +
> + if (t->tm_year >= 200)
> + regs[5] |= FIELD_PREP(MAX313XX_MONTH_CENTURY, 1);
> +
> + /* Clkin needs to be disabled before setting time. */
> + if (rtc->clkin) {
> + switch (rtc->id) {
> + case ID_MAX31341:
> + case ID_MAX31342:
> + ret = regmap_clear_bits(rtc->regmap,
> + MAX31341_42_CONFIG1_REG,
> + MAX31341_42_CONFIG1_CLKIN_EN);
> + break;
> + default:
> + ret = 0;
> + }
> + if (ret)
> + return ret;
> + }
> +
> + ret = regmap_bulk_write(rtc->regmap, rtc->chip->sec_reg, regs, 7);
> + if (ret)
> + return ret;
> +
> + switch (rtc->id) {
> + case ID_MAX31341:
> + case ID_MAX31342:
> + ret = regmap_set_bits(rtc->regmap, MAX3134X_CFG2_REG,
> + MAX3134X_CFG2_SET_RTC);
> + if (ret)
> + return ret;
> +
> + fsleep(10000);
> +
> + ret = regmap_clear_bits(rtc->regmap, MAX3134X_CFG2_REG,
> + MAX3134X_CFG2_SET_RTC);
> + if (ret)
> + return ret;
> +
> + if (rtc->clkin)
> + ret = regmap_set_bits(rtc->regmap,
> + MAX31341_42_CONFIG1_REG,
> + MAX31341_42_CONFIG1_CLKIN_EN);
> +
> + break;
> + default:
> + break;
> + }
> +
> + return ret;
> +}
> +
> +static int max313xx_read_alarm(struct device *dev, struct rtc_wkalrm *t)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + unsigned int status, int_en;
> + struct rtc_time time;
> + u8 regs[6];
> + int ret;
> +
> + ret = regmap_bulk_read(rtc->regmap, rtc->chip->alarm1_sec_reg, regs,
> + sizeof(regs));
> + if (ret)
> + return ret;
> +
> + t->time.tm_sec = bcd2bin(regs[0] & 0x7f);
> + t->time.tm_min = bcd2bin(regs[1] & 0x7f);
> + t->time.tm_hour = bcd2bin(regs[2] & 0x3f);
> + t->time.tm_mday = bcd2bin(regs[3] & 0x3f);
> + t->time.tm_mon = bcd2bin(regs[4] & 0x1f) - 1;
> + t->time.tm_year = bcd2bin(regs[5]) + 100;
> +
> + ret = max313xx_read_time(dev, &time);
> + if (ret)
> + return ret;
> +
> + if (time.tm_year >= 200)
> + t->time.tm_year += 100;
> +
> + ret = regmap_read(rtc->regmap, rtc->chip->int_status_reg, &status);
> + if (ret)
> + return ret;
> +
> + ret = regmap_read(rtc->regmap, rtc->chip->int_en_reg, &int_en);
> + if (ret)
> + return ret;
> +
> + t->enabled = FIELD_GET(MAX313XX_INT_ALARM1, int_en);
> + t->pending = FIELD_GET(MAX313XX_INT_ALARM1, status);
> +
> + return 0;
> +}
> +
> +static int max313xx_set_alarm(struct device *dev, struct rtc_wkalrm *t)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + unsigned int reg;
> + u8 regs[6];
> + int ret;
> +
> + regs[0] = bin2bcd(t->time.tm_sec);
> + regs[1] = bin2bcd(t->time.tm_min);
> + regs[2] = bin2bcd(t->time.tm_hour);
> + regs[3] = bin2bcd(t->time.tm_mday);
> + regs[4] = bin2bcd(t->time.tm_mon + 1);
> + regs[5] = bin2bcd(t->time.tm_year % 100);
> +
> + ret = regmap_bulk_write(rtc->regmap, rtc->chip->alarm1_sec_reg, regs,
> + sizeof(regs));
> + if (ret)
> + return ret;
> +
> + reg = FIELD_PREP(MAX313XX_INT_ALARM1, t->enabled);
> + ret = regmap_update_bits(rtc->regmap, rtc->chip->int_en_reg,
> + MAX313XX_INT_ALARM1 | MAX313XX_INT_ALARM2,
> + reg);
> + if (ret)
> + return ret;
> +
> + /* Clear status register */
> + return regmap_read(rtc->regmap, rtc->chip->int_status_reg, ®);
> +}
> +
> +static int max313xx_alarm_irq_enable(struct device *dev, unsigned int enabled)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> +
> + return regmap_update_bits(rtc->regmap, rtc->chip->int_en_reg,
> + MAX313XX_INT_ALARM1,
> + FIELD_PREP(MAX313XX_INT_ALARM1, enabled));
> +}
> +
> +static const struct rtc_class_ops max3133x_rtc_ops = {
> + .read_time = max313xx_read_time,
> + .set_time = max313xx_set_time,
> + .read_alarm = max313xx_read_alarm,
> + .set_alarm = max313xx_set_alarm,
> + .alarm_irq_enable = max313xx_alarm_irq_enable,
> +};
> +
> +static irqreturn_t max313xx_irq(int irq, void *dev_id)
> +{
> + struct max313xx *rtc = dev_id;
> + struct mutex *lock = &rtc->rtc->ops_lock;
> + int stat, ret;
> +
> + mutex_lock(lock);
> + ret = regmap_read(rtc->regmap, rtc->chip->int_status_reg, &stat);
> + if (ret)
> + goto out;
> +
> + if (FIELD_GET(MAX313XX_INT_ALARM1, stat)) {
> + ret = regmap_update_bits(rtc->regmap, rtc->chip->int_en_reg,
> + MAX313XX_INT_ALARM1, 0);
> + if (ret)
> + goto out;
> +
> + rtc_update_irq(rtc->rtc, 1, RTC_AF | RTC_IRQF);
> + }
> +
> +out:
> + mutex_unlock(lock);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int max313xx_nvmem_reg_read(void *priv, unsigned int offset,
> + void *val, size_t bytes)
> +{
> + struct max313xx *rtc = priv;
> + unsigned int reg = rtc->chip->ram_reg + offset;
> +
> + return regmap_bulk_read(rtc->regmap, reg, val, bytes);
> +}
> +
> +static int max313xx_nvmem_reg_write(void *priv, unsigned int offset,
> + void *val, size_t bytes)
> +{
> + struct max313xx *rtc = priv;
> + unsigned int reg = rtc->chip->ram_reg + offset;
> +
> + return regmap_bulk_write(rtc->regmap, reg, val, bytes);
> +}
> +
> +struct nvmem_config max313xx_nvmem_cfg = {
> + .reg_read = max313xx_nvmem_reg_read,
> + .reg_write = max313xx_nvmem_reg_write,
> + .word_size = 8,
> +};
> +
> +static unsigned long max313xx_clkout_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + struct max313xx *rtc = clk_hw_to_max313xx(hw);
> + const struct clkout_cfg *clkout = rtc->chip->clkout;
> + unsigned int freq_mask;
> + unsigned int reg;
> + int ret;
> +
> + ret = regmap_read(rtc->regmap, clkout->reg, ®);
> + if (ret)
> + return 0;
> +
> + freq_mask = __roundup_pow_of_two(clkout->freq_size) - 1;
> +
> + return clkout->freq_avail[(reg >> clkout->freq_pos) & freq_mask];
> +}
> +
> +static long max313xx_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long *prate)
> +{
> + struct max313xx *rtc = clk_hw_to_max313xx(hw);
> + struct clkout_cfg *clkout = rtc->chip->clkout;
> + int index;
> +
> + index = find_closest(rate, clkout->freq_avail, clkout->freq_size);
> + return clkout->freq_avail[index];
> +}
> +
> +static int max313xx_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long parent_rate)
> +{
> + struct max313xx *rtc = clk_hw_to_max313xx(hw);
> + struct clkout_cfg *clkout = rtc->chip->clkout;
> + unsigned int freq_mask;
> + int index;
> +
> + index = find_closest(rate, clkout->freq_avail, clkout->freq_size);
> + freq_mask = __roundup_pow_of_two(clkout->freq_size) - 1;
> +
> + return regmap_update_bits(rtc->regmap, clkout->reg,
> + freq_mask << clkout->freq_pos,
> + index << clkout->freq_pos);
> +}
> +
> +static int max313xx_clkout_enable(struct clk_hw *hw)
> +{
> + struct max313xx *rtc = clk_hw_to_max313xx(hw);
> + struct clkout_cfg *clkout = rtc->chip->clkout;
> +
> + if (clkout->en_invert)
> + return regmap_clear_bits(rtc->regmap, clkout->reg,
> + clkout->en_bit);
> +
> + return regmap_set_bits(rtc->regmap, clkout->reg, clkout->en_bit);
> +}
> +
> +static void max313xx_clkout_disable(struct clk_hw *hw)
> +{
> + struct max313xx *rtc = clk_hw_to_max313xx(hw);
> + struct clkout_cfg *clkout = rtc->chip->clkout;
> +
> + switch (rtc->id) {
> + case ID_MAX31331:
> + case ID_MAX31334:
> + if (rtc->irq > 0) {
> + dev_err(rtc->rtc->dev.parent,
> + "clkout cannot be disabled when IRQ is requested");
> + return;
> + }
> + break;
> + default:
> + break;
> + }
> +
> + if (clkout->en_invert)
> + regmap_set_bits(rtc->regmap, clkout->reg, clkout->en_bit);
> + else
> + regmap_clear_bits(rtc->regmap, clkout->reg, clkout->en_bit);
> +}
> +
> +static int max313xx_clkout_is_enabled(struct clk_hw *hw)
> +{
> + struct max313xx *rtc = clk_hw_to_max313xx(hw);
> + struct clkout_cfg *clkout = rtc->chip->clkout;
> + unsigned int reg;
> + int ret;
> +
> + ret = regmap_read(rtc->regmap, clkout->reg, ®);
> + if (ret)
> + return ret;
> +
> + return !!(reg & clkout->en_bit) ^ clkout->en_invert;
> +}
> +
> +static const struct clk_ops max313xx_clkout_ops = {
> + .recalc_rate = max313xx_clkout_recalc_rate,
> + .round_rate = max313xx_clkout_round_rate,
> + .set_rate = max313xx_clkout_set_rate,
> + .enable = max313xx_clkout_enable,
> + .disable = max313xx_clkout_disable,
> + .is_enabled = max313xx_clkout_is_enabled,
> +};
> +
> +struct clk_init_data max313xx_clk_init = {
> + .name = "max313xx-clkout",
> + .ops = &max313xx_clkout_ops,
> +};
> +
> +static int max313xx_read_temp(struct device *dev, enum hwmon_sensor_types type,
> + u32 attr, int channel, long *val)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + struct chip_desc desc = chip[rtc->id];
> + u8 reg[2];
> + s16 temp;
> + int ret;
> +
> + if (type != hwmon_temp || attr != hwmon_temp_input)
> + return -EOPNOTSUPP;
> +
> + ret = regmap_bulk_read(rtc->regmap, desc.temp_reg, reg, 2);
> + if (ret)
> + return ret;
> +
> + temp = get_unaligned_be16(reg);
> +
> + *val = (temp / 64) * 250;
> +
> + return 0;
> +}
> +
> +static umode_t max313xx_is_visible(const void *data,
> + enum hwmon_sensor_types type,
> + u32 attr, int channel)
> +{
> + if (type == hwmon_temp && attr == hwmon_temp_input)
> + return 0444;
> +
> + return 0;
> +}
> +
> +static const struct hwmon_channel_info *max313xx_info[] = {
> + HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT),
> + NULL
> +};
> +
> +static const struct hwmon_ops max313xx_hwmon_ops = {
> + .is_visible = max313xx_is_visible,
> + .read = max313xx_read_temp,
> +};
> +
> +static const struct hwmon_chip_info max313xx_chip_info = {
> + .ops = &max313xx_hwmon_ops,
> + .info = max313xx_info,
> +};
> +
> +static int max313xx_init(struct max313xx *rtc)
> +{
> + int ret;
> +
> + switch (rtc->id) {
> + case ID_MAX31341:
> + case ID_MAX31342:
> + ret = regmap_clear_bits(rtc->regmap, MAX31341_42_CONFIG1_REG,
> + MAX31341_42_CONFIG1_OSC_DISABLE);
> + if (ret)
> + return ret;
> +
> + return regmap_set_bits(rtc->regmap, MAX31341_42_CONFIG1_REG,
> + MAX31341_42_CONFIG1_SWRST);
> + default:
> + return 0;
> + }
> +}
> +
> +static int max313xx_clkout_register(struct device *dev)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + int ret;
> +
> + if (!device_property_present(dev, "#clock-cells"))
> + return 0;
> +
> + max313xx_clk_init.name = rtc->chip->clkout_name;
> + device_property_read_string(dev, "clock-output-names",
> + &max313xx_clk_init.name);
> + rtc->clkout.init = &max313xx_clk_init;
> +
> + ret = devm_clk_hw_register(dev, &rtc->clkout);
> + if (ret)
> + return dev_err_probe(dev, ret, "cannot register clock\n");
> +
> + return of_clk_add_provider(dev->of_node, of_clk_src_simple_get,
> + rtc->clkout.clk);
> +}
> +
> +static int max313xx_trickle_charger_setup(struct device *dev)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + bool diode_disable;
> + int index, reg;
> + u32 ohms = 0;
> + int ret;
> +
> + device_property_read_u32(dev, "trickle-resistor-ohms", &ohms);
> + if (!ohms)
> + return 0;
> +
> + diode_disable = device_property_read_bool(dev, "trickle-diode-disable");
> +
> + if (!rtc->chip->trickle_reg) {
> + dev_warn(dev, "device does not have trickle charger\n");
> + return 0;
> + }
> +
> + index = find_closest(ohms, max313xx_trickle_ohms,
> + ARRAY_SIZE(max313xx_trickle_ohms)) + 1;
> +
> + switch (rtc->id) {
> + case ID_MAX31329:
> + reg = FIELD_PREP(MAX31329_TRICKLE_ENABLE_BIT, 1) |
> + FIELD_PREP(MAX31329_43_TRICKLE_RES_MASK, index) |
> + FIELD_PREP(MAX31329_43_TRICKLE_DIODE_EN, !diode_disable);
> + break;
> + case ID_MAX31331:
> + case ID_MAX31334:
> + reg = FIELD_PREP(MAX3133X_TRICKLE_ENABLE_BIT, 1) |
> + FIELD_PREP(MAX3133X_TRICKLE_DIODE_EN, !diode_disable) |
> + FIELD_PREP(MAX3133X_TRICKLE_RES_MASK, index);
> + break;
> + case ID_MAX31341:
> + if (index == 1)
> + index = 0;
> + reg = FIELD_PREP(MAX31341_TRICKLE_ENABLE_BIT, 1) |
> + FIELD_PREP(MAX31341_TRICKLE_DIODE_EN, !diode_disable) |
> + FIELD_PREP(MAX31341_TRICKLE_RES_MASK, index);
> +
> + ret = regmap_set_bits(rtc->regmap, MAX31341_POWER_MGMT_REG,
> + MAX31341_POWER_MGMT_TRICKLE_BIT);
> + if (ret)
> + return ret;
> +
> + break;
> + case ID_MAX31343:
> + reg = FIELD_PREP(MAX31329_43_TRICKLE_RES_MASK, index) |
> + FIELD_PREP(MAX31329_43_TRICKLE_DIODE_EN, !diode_disable) |
> + FIELD_PREP(MAX31343_TRICKLE_ENABLE_MASK,
> + MAX31343_TRICKLE_ENABLE_CODE);
> + break;
> + default:
> + return -EOPNOTSUPP;
> + }
> +
> + return regmap_write(rtc->regmap, rtc->chip->trickle_reg, reg);
> +}
> +
> +static int max313xx_find_clkin_freq_index(struct clk *clk)
> +{
> + unsigned long rate = clk_get_rate(clk);
> + int freq;
> + int i;
> +
> + i = find_closest(rate, max313xx_clkin_freq,
> + ARRAY_SIZE(max313xx_clkin_freq));
> + if (max313xx_clkin_freq[i] == rate)
> + return i;
> +
> + for (i = ARRAY_SIZE(max313xx_clkin_freq) - 1; i >= 0; i--) {
> + freq = max313xx_clkin_freq[i];
> + if (freq == clk_round_rate(clk, freq))
> + return i;
> + }
> +
> + /* supplied clock cannot produce one of desired frequency rate */
> + return -ENODEV;
> +}
> +
> +static int max313xx_clkin_init(struct device *dev)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + int rate;
> + int ret;
> +
> + rtc->clkin = devm_clk_get_enabled(dev, NULL);
> + if (IS_ERR(rtc->clkin)) {
> + if (PTR_ERR(rtc->clkin) == -ENOENT)
> + rtc->clkin = NULL;
> + else
> + return dev_err_probe(dev, PTR_ERR(rtc->clkin),
> + "error while clkin setup\n");
> + }
> +
> + if (!rtc->clkin) {
> + switch (rtc->id) {
> + case ID_MAX31329:
> + return regmap_clear_bits(rtc->regmap,
> + MAX31329_CONFIG2_REG,
> + MAX31329_CONFIG2_CLKIN_EN);
> + case ID_MAX31341:
> + case ID_MAX31342:
> + return regmap_clear_bits(rtc->regmap,
> + MAX31341_42_CONFIG1_REG,
> + MAX31341_42_CONFIG1_CLKIN_EN);
> + default:
> + return 0;
> + }
> + }
> +
> + rate = max313xx_find_clkin_freq_index(rtc->clkin);
> + if (rate < 0)
> + return dev_err_probe(dev, rate,
> + "clkin cannot produce required frequency\n");
> +
> + ret = clk_set_rate(rtc->clkin, max313xx_clkin_freq[rate]);
> + if (ret)
> + return ret;
> +
> + switch (rtc->id) {
> + case ID_MAX31329:
> + ret = regmap_update_bits(rtc->regmap, MAX31329_CONFIG2_REG,
> + MAX31329_CONFIG2_CLKIN_FREQ, rate);
> + if (ret)
> + return ret;
> +
> + return regmap_set_bits(rtc->regmap, MAX31329_CONFIG2_REG,
> + MAX31329_CONFIG2_CLKIN_EN);
> + case ID_MAX31341:
> + case ID_MAX31342:
> + ret = regmap_update_bits(rtc->regmap, MAX31341_42_CONFIG1_REG,
> + MAX31341_42_CONFIG1_CLKIN_FREQ,
> + FIELD_PREP(MAX31341_42_CONFIG1_CLKIN_FREQ, rate));
> + if (ret)
> + return ret;
> +
> + return regmap_set_bits(rtc->regmap, MAX31341_42_CONFIG1_REG,
> + MAX31341_42_CONFIG1_CLKIN_EN);
> + default:
> + rtc->clkin = NULL;
> + dev_warn(dev, "device does not have clock input\n");
> + return 0;
> + }
> +}
> +
> +static int max313xx_irq_init(struct device *dev, const char *devname)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + bool wakeup;
> + int ret;
> +
> + rtc->irq = rtc->irqs[0];
> +
> + switch (rtc->id) {
> + case ID_MAX31328:
> + /* max31328 sqw ant int pin is shared */
> + if (rtc->id == ID_MAX31328 && rtc->irq > 0 && rtc->clkout.clk)
> + return dev_err_probe(dev, -EOPNOTSUPP,
> + "cannot have both sqw clock output and irq enabled");
> +
> + break;
> + case ID_MAX31331:
> + case ID_MAX31334:
> + if (rtc->clkout.clk) {
> + /* clockout needs to be enabled for using INTA pin */
> + ret = clk_prepare_enable(rtc->clkout.clk);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "cannot enable clkout\n");
> + } else {
> + rtc->irq = rtc->irqs[1];
> + }
> + break;
> + default:
> + if (rtc->clkin) {
> + rtc->irq = rtc->irqs[1];
> +
> + /* wrong interrupt specified */
> + if (rtc->irqs[0] > 0 && rtc->irqs[1] <= 0)
> + dev_warn(dev, "INTA is specified but INTB required for irq when clkin is enabled\n");
> +
> + if (rtc->clkout.clk && rtc->irq > 0)
> + return dev_err_probe(dev, -EOPNOTSUPP,
> + "irq not possible when both clkin and clkout are configured\n");
> +
> + if (rtc->irq <= 0)
> + break;
> +
> + /* clkout needs to be disabled for using INTB pin */
> + if (rtc->chip->clkout->en_invert)
> + ret = regmap_set_bits(rtc->regmap,
> + rtc->chip->clkout->reg,
> + rtc->chip->clkout->en_bit);
> + else
> + ret = regmap_clear_bits(rtc->regmap,
> + rtc->chip->clkout->reg,
> + rtc->chip->clkout->en_bit);
> +
> + if (ret)
> + return ret;
> + }
> + break;
> + }
> +
> + if (rtc->irq > 0) {
> + ret = devm_request_threaded_irq(dev, rtc->irq, NULL,
> + &max313xx_irq, IRQF_ONESHOT,
> + devname, rtc);
> + if (ret)
> + return ret;
> +
> + wakeup = device_property_read_bool(dev, "wakeup-source");
> + return device_init_wakeup(dev, wakeup);
> + }
> +
> + __clear_bit(RTC_FEATURE_ALARM, rtc->rtc->features);
> +
> + return 0;
> +}
> +
> +static int max313xx_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct device *dev = &client->dev;
> + struct max313xx *max313xx;
> + struct device *hwmon;
> + const void *match;
> + int ret;
> +
> + max313xx = devm_kzalloc(&client->dev, sizeof(*max313xx), GFP_KERNEL);
> + if (!max313xx)
> + return -ENOMEM;
> +
> + dev_set_drvdata(&client->dev, max313xx);
> +
> + max313xx->regmap = devm_regmap_init_i2c(client, ®map_config);
> + if (IS_ERR(max313xx->regmap)) {
> + return dev_err_probe(dev, PTR_ERR(max313xx->regmap),
> + "regmap init failed\n");
> + }
> +
> + i2c_set_clientdata(client, max313xx);
> +
> + match = device_get_match_data(dev);
> + if (match)
> + max313xx->id = (enum max313xx_ids)match;
> + else if (id)
> + max313xx->id = id->driver_data;
> + else
> + return -ENODEV;
> +
> + max313xx->chip = &chip[max313xx->id];
> +
> + ret = max313xx_init(max313xx);
> + if (ret)
> + return ret;
> +
> + max313xx->rtc = devm_rtc_allocate_device(dev);
> + if (IS_ERR(max313xx->rtc))
> + return PTR_ERR(max313xx->rtc);
> +
> + max313xx->rtc->ops = &max3133x_rtc_ops;
> + max313xx->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
> + max313xx->rtc->range_max = RTC_TIMESTAMP_END_2199;
> +
> + ret = devm_rtc_register_device(max313xx->rtc);
> + if (ret)
> + return ret;
> +
> + switch (max313xx->id) {
> + case ID_MAX31328:
> + case ID_MAX31343:
> + max313xx->irqs[0] = client->irq;
> + break;
> + default:
> + max313xx->irqs[0] = fwnode_irq_get_byname(dev_fwnode(dev), "INTA");
> + max313xx->irqs[1] = fwnode_irq_get_byname(dev_fwnode(dev), "INTB");
> + if (max313xx->irqs[0] <= 0 && max313xx->irqs[1] <= 0 && client->irq)
> + return dev_err_probe(dev, -ENOENT,
> + "interrupt requested but no interrupt name specified\n");
> +
> + break;
> + }
> +
> + ret = max313xx_clkout_register(dev);
> + if (ret)
> + return ret;
> +
> + ret = max313xx_clkin_init(dev);
> + if (ret)
> + return ret;
> +
> + /* IRQ wiring depends on the clock configuration so parse them first */
> + ret = max313xx_irq_init(dev, client->name);
> + if (ret)
> + return ret;
> +
> + if (max313xx->chip->ram_size) {
> + max313xx_nvmem_cfg.size = max313xx->chip->ram_size;
> + max313xx_nvmem_cfg.priv = max313xx;
> +
> + ret = devm_rtc_nvmem_register(max313xx->rtc, &max313xx_nvmem_cfg);
> + if (ret)
> + dev_warn(dev, "cannot register rtc nvmem\n");
> + }
> +
> + if (max313xx->chip->temp_reg) {
> + hwmon = devm_hwmon_device_register_with_info(dev, client->name,
> + max313xx,
> + &max313xx_chip_info,
> + NULL);
> + if (IS_ERR(hwmon))
> + dev_warn(dev, "cannot register hwmon device: %li\n",
> + PTR_ERR(hwmon));
> + }
> +
> + return max313xx_trickle_charger_setup(dev);
> +}
> +
> +static const struct of_device_id max313xx_of_id[] = {
> + { .compatible = "adi,max31328", .data = (void *)ID_MAX31328 },
> + { .compatible = "adi,max31329", .data = (void *)ID_MAX31329 },
> + { .compatible = "adi,max31331", .data = (void *)ID_MAX31331 },
> + { .compatible = "adi,max31334", .data = (void *)ID_MAX31334 },
> + { .compatible = "adi,max31341", .data = (void *)ID_MAX31341 },
> + { .compatible = "adi,max31342", .data = (void *)ID_MAX31342 },
> + { .compatible = "adi,max31343", .data = (void *)ID_MAX31343 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, max313xx_of_id);
> +
> +static const struct i2c_device_id max313xx_id[] = {
> + { "max31328", ID_MAX31328 },
> + { "max31329", ID_MAX31329 },
> + { "max31331", ID_MAX31331 },
> + { "max31334", ID_MAX31334 },
> + { "max31341", ID_MAX31341 },
> + { "max31342", ID_MAX31342 },
> + { "max31343", ID_MAX31343 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, max313xx_id);
> +
> +static struct i2c_driver max313xx_driver = {
> + .driver = {
> + .name = "rtc-max313xx",
> + .of_match_table = max313xx_of_id,
> + },
> + .probe = max313xx_probe,
> + .id_table = max313xx_id,
> +};
> +module_i2c_driver(max313xx_driver);
> +
> +MODULE_DESCRIPTION("Analog Devices MAX313XX RTCs");
> +MODULE_AUTHOR("Zeynep Arslanbenzer <Zeynep.Arslanbenzer@analog.com>");
> +MODULE_AUTHOR("Ibrahim Tilki <Ibrahim.Tilki@analog.com>");
> +MODULE_SOFTDEP("pre: regmap-i2c");
> +MODULE_LICENSE("GPL");
> +MODULE_VERSION("1.0");
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v3 1/2] drivers: rtc: add max313xx series rtc driver
2023-02-14 20:28 ` Chris Packham
@ 2023-02-14 21:40 ` Alexandre Belloni
2023-02-14 22:36 ` Chris Packham
2023-02-17 15:17 ` Tilki, Ibrahim
1 sibling, 1 reply; 14+ messages in thread
From: Alexandre Belloni @ 2023-02-14 21:40 UTC (permalink / raw)
To: Chris Packham
Cc: Ibrahim Tilki, a.zummo, jdelvare, linux, robh+dt,
krzysztof.kozlowski+dt, linux-rtc, linux-kernel, linux-hwmon,
devicetree, Zeynep Arslanbenzer
On 14/02/2023 20:28:05+0000, Chris Packham wrote:
> Hi Ibrahim,
>
> On 9/11/22 01:22, Ibrahim Tilki wrote:
> > Adding support for Analog Devices MAX313XX series RTCs.
> >
> > Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki@analog.com>
> > Signed-off-by: Zeynep Arslanbenzer <Zeynep.Arslanbenzer@analog.com>
> > ---
> > drivers/rtc/Kconfig | 11 +
> > drivers/rtc/Makefile | 1 +
> > drivers/rtc/rtc-max313xx.c | 1070 ++++++++++++++++++++++++++++++++++++
> > 3 files changed, 1082 insertions(+)
> > create mode 100644 drivers/rtc/rtc-max313xx.c
>
> What is the current state of this work? I see there are some comments on
> this v3 iteration from late last year and I couldn't find any newer
> iteration on any mailing list. We've got some new hardware arriving soon
> that will have the MAX31331 RTC and I'm keen to see this patch series
> land. Is there anything I can do to help it along? I can't be very
> specific about when I'll see the new hardware (who can these days), the
> last update was "boards are due in March".
>
> For the maintainers on the Cc list once the dust settles how would I get
> this supported in a LTS kernel (we're currently using the 5.15 series)?
> Or is totally out of the question because it's not just a new device id?
This will not happen, you will have to update to the next LTS (which you
should do anyway)
--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v3 1/2] drivers: rtc: add max313xx series rtc driver
2023-02-14 21:40 ` Alexandre Belloni
@ 2023-02-14 22:36 ` Chris Packham
0 siblings, 0 replies; 14+ messages in thread
From: Chris Packham @ 2023-02-14 22:36 UTC (permalink / raw)
To: Alexandre Belloni
Cc: Ibrahim Tilki, a.zummo, jdelvare, linux, robh+dt,
krzysztof.kozlowski+dt, linux-rtc, linux-kernel, linux-hwmon,
devicetree, Zeynep Arslanbenzer
On 15/02/23 10:40, Alexandre Belloni wrote:
> On 14/02/2023 20:28:05+0000, Chris Packham wrote:
>> Hi Ibrahim,
>>
>> On 9/11/22 01:22, Ibrahim Tilki wrote:
>>> Adding support for Analog Devices MAX313XX series RTCs.
>>>
>>> Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki@analog.com>
>>> Signed-off-by: Zeynep Arslanbenzer <Zeynep.Arslanbenzer@analog.com>
>>> ---
>>> drivers/rtc/Kconfig | 11 +
>>> drivers/rtc/Makefile | 1 +
>>> drivers/rtc/rtc-max313xx.c | 1070 ++++++++++++++++++++++++++++++++++++
>>> 3 files changed, 1082 insertions(+)
>>> create mode 100644 drivers/rtc/rtc-max313xx.c
>> What is the current state of this work? I see there are some comments on
>> this v3 iteration from late last year and I couldn't find any newer
>> iteration on any mailing list. We've got some new hardware arriving soon
>> that will have the MAX31331 RTC and I'm keen to see this patch series
>> land. Is there anything I can do to help it along? I can't be very
>> specific about when I'll see the new hardware (who can these days), the
>> last update was "boards are due in March".
>>
>> For the maintainers on the Cc list once the dust settles how would I get
>> this supported in a LTS kernel (we're currently using the 5.15 series)?
>> Or is totally out of the question because it's not just a new device id?
> This will not happen, you will have to update to the next LTS (which you
> should do anyway)
I was afraid that was going to be the answer. We'll have to carry it as
a local patch until there is a LTS version with the driver support we
need in it.
^ permalink raw reply [flat|nested] 14+ messages in thread
* RE: [PATCH v3 1/2] drivers: rtc: add max313xx series rtc driver
2023-02-14 20:28 ` Chris Packham
2023-02-14 21:40 ` Alexandre Belloni
@ 2023-02-17 15:17 ` Tilki, Ibrahim
2023-02-19 20:19 ` Chris Packham
2023-03-13 2:15 ` Chris Packham
1 sibling, 2 replies; 14+ messages in thread
From: Tilki, Ibrahim @ 2023-02-17 15:17 UTC (permalink / raw)
To: Chris Packham, a.zummo, alexandre.belloni, jdelvare, linux,
robh+dt, krzysztof.kozlowski+dt
Cc: linux-rtc, linux-kernel, linux-hwmon, devicetree, Arslanbenzer, Zeynep
> Hi Ibrahim,
>
> On 9/11/22 01:22, Ibrahim Tilki wrote:
> > Adding support for Analog Devices MAX313XX series RTCs.
> >
> > Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki@analog.com>
> > Signed-off-by: Zeynep Arslanbenzer <Zeynep.Arslanbenzer@analog.com>
> > ---
> > drivers/rtc/Kconfig | 11 +
> > drivers/rtc/Makefile | 1 +
> > drivers/rtc/rtc-max313xx.c | 1070 ++++++++++++++++++++++++++++++++++++
> > 3 files changed, 1082 insertions(+)
> > create mode 100644 drivers/rtc/rtc-max313xx.c
>
> What is the current state of this work? I see there are some comments on
> this v3 iteration from late last year and I couldn't find any newer
> iteration on any mailing list. We've got some new hardware arriving soon
> that will have the MAX31331 RTC and I'm keen to see this patch series
> land. Is there anything I can do to help it along? I can't be very
> specific about when I'll see the new hardware (who can these days), the
> last update was "boards are due in March".
>
> For the maintainers on the Cc list once the dust settles how would I get
> this supported in a LTS kernel (we're currently using the 5.15 series)?
> Or is totally out of the question because it's not just a new device id?
Hi Chris,
Patch v4 is on the way, I will be sending it in a few weeks.
It is hard to tell when it is going to land but I expect to be more responsive
to reviews after patch v4.
Ibrahim
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v3 1/2] drivers: rtc: add max313xx series rtc driver
2023-02-17 15:17 ` Tilki, Ibrahim
@ 2023-02-19 20:19 ` Chris Packham
2023-03-13 2:15 ` Chris Packham
1 sibling, 0 replies; 14+ messages in thread
From: Chris Packham @ 2023-02-19 20:19 UTC (permalink / raw)
To: Tilki, Ibrahim, a.zummo, alexandre.belloni, jdelvare, linux,
robh+dt, krzysztof.kozlowski+dt
Cc: linux-rtc, linux-kernel, linux-hwmon, devicetree, Arslanbenzer, Zeynep
On 18/02/23 04:17, Tilki, Ibrahim wrote:
>> Hi Ibrahim,
>>
>> On 9/11/22 01:22, Ibrahim Tilki wrote:
>>> Adding support for Analog Devices MAX313XX series RTCs.
>>>
>>> Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki@analog.com>
>>> Signed-off-by: Zeynep Arslanbenzer <Zeynep.Arslanbenzer@analog.com>
>>> ---
>>> drivers/rtc/Kconfig | 11 +
>>> drivers/rtc/Makefile | 1 +
>>> drivers/rtc/rtc-max313xx.c | 1070 ++++++++++++++++++++++++++++++++++++
>>> 3 files changed, 1082 insertions(+)
>>> create mode 100644 drivers/rtc/rtc-max313xx.c
>> What is the current state of this work? I see there are some comments on
>> this v3 iteration from late last year and I couldn't find any newer
>> iteration on any mailing list. We've got some new hardware arriving soon
>> that will have the MAX31331 RTC and I'm keen to see this patch series
>> land. Is there anything I can do to help it along? I can't be very
>> specific about when I'll see the new hardware (who can these days), the
>> last update was "boards are due in March".
>>
>> For the maintainers on the Cc list once the dust settles how would I get
>> this supported in a LTS kernel (we're currently using the 5.15 series)?
>> Or is totally out of the question because it's not just a new device id?
> Hi Chris,
>
> Patch v4 is on the way, I will be sending it in a few weeks.
> It is hard to tell when it is going to land but I expect to be more responsive
> to reviews after patch v4.
Great thanks. I'll keep an eye out for it.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v3 1/2] drivers: rtc: add max313xx series rtc driver
2023-02-17 15:17 ` Tilki, Ibrahim
2023-02-19 20:19 ` Chris Packham
@ 2023-03-13 2:15 ` Chris Packham
2023-03-13 2:20 ` Alexandre Belloni
1 sibling, 1 reply; 14+ messages in thread
From: Chris Packham @ 2023-03-13 2:15 UTC (permalink / raw)
To: Tilki, Ibrahim, a.zummo, alexandre.belloni, jdelvare, linux,
robh+dt, krzysztof.kozlowski+dt
Cc: linux-rtc, linux-kernel, linux-hwmon, devicetree, Arslanbenzer, Zeynep
Hi Ibrahim,
On 18/02/23 04:17, Tilki, Ibrahim wrote:
>> Hi Ibrahim,
>>
>> On 9/11/22 01:22, Ibrahim Tilki wrote:
>>> Adding support for Analog Devices MAX313XX series RTCs.
>>>
>>> Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki@analog.com>
>>> Signed-off-by: Zeynep Arslanbenzer <Zeynep.Arslanbenzer@analog.com>
>>> ---
>>> drivers/rtc/Kconfig | 11 +
>>> drivers/rtc/Makefile | 1 +
>>> drivers/rtc/rtc-max313xx.c | 1070 ++++++++++++++++++++++++++++++++++++
>>> 3 files changed, 1082 insertions(+)
>>> create mode 100644 drivers/rtc/rtc-max313xx.c
>> What is the current state of this work? I see there are some comments on
>> this v3 iteration from late last year and I couldn't find any newer
>> iteration on any mailing list. We've got some new hardware arriving soon
>> that will have the MAX31331 RTC and I'm keen to see this patch series
>> land. Is there anything I can do to help it along? I can't be very
>> specific about when I'll see the new hardware (who can these days), the
>> last update was "boards are due in March".
>>
>> For the maintainers on the Cc list once the dust settles how would I get
>> this supported in a LTS kernel (we're currently using the 5.15 series)?
>> Or is totally out of the question because it's not just a new device id?
> Hi Chris,
>
> Patch v4 is on the way, I will be sending it in a few weeks.
> It is hard to tell when it is going to land but I expect to be more responsive
> to reviews after patch v4.
FYI I've now got some boards with a MAX31331. I've given v3 a quick test
and it works for me.
Are you also looking at a u-boot driver? If not I can port your driver
across reasonably easily.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v3 1/2] drivers: rtc: add max313xx series rtc driver
2023-03-13 2:15 ` Chris Packham
@ 2023-03-13 2:20 ` Alexandre Belloni
2023-03-13 2:30 ` Chris Packham
0 siblings, 1 reply; 14+ messages in thread
From: Alexandre Belloni @ 2023-03-13 2:20 UTC (permalink / raw)
To: Chris Packham
Cc: Tilki, Ibrahim, a.zummo, jdelvare, linux, robh+dt,
krzysztof.kozlowski+dt, linux-rtc, linux-kernel, linux-hwmon,
devicetree, Arslanbenzer, Zeynep
Hello,
On 13/03/2023 02:15:26+0000, Chris Packham wrote:
> Hi Ibrahim,
>
> On 18/02/23 04:17, Tilki, Ibrahim wrote:
> >> Hi Ibrahim,
> >>
> >> On 9/11/22 01:22, Ibrahim Tilki wrote:
> >>> Adding support for Analog Devices MAX313XX series RTCs.
> >>>
> >>> Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki@analog.com>
> >>> Signed-off-by: Zeynep Arslanbenzer <Zeynep.Arslanbenzer@analog.com>
> >>> ---
> >>> drivers/rtc/Kconfig | 11 +
> >>> drivers/rtc/Makefile | 1 +
> >>> drivers/rtc/rtc-max313xx.c | 1070 ++++++++++++++++++++++++++++++++++++
> >>> 3 files changed, 1082 insertions(+)
> >>> create mode 100644 drivers/rtc/rtc-max313xx.c
> >> What is the current state of this work? I see there are some comments on
> >> this v3 iteration from late last year and I couldn't find any newer
> >> iteration on any mailing list. We've got some new hardware arriving soon
> >> that will have the MAX31331 RTC and I'm keen to see this patch series
> >> land. Is there anything I can do to help it along? I can't be very
> >> specific about when I'll see the new hardware (who can these days), the
> >> last update was "boards are due in March".
> >>
> >> For the maintainers on the Cc list once the dust settles how would I get
> >> this supported in a LTS kernel (we're currently using the 5.15 series)?
> >> Or is totally out of the question because it's not just a new device id?
> > Hi Chris,
> >
> > Patch v4 is on the way, I will be sending it in a few weeks.
> > It is hard to tell when it is going to land but I expect to be more responsive
> > to reviews after patch v4.
>
> FYI I've now got some boards with a MAX31331. I've given v3 a quick test
> and it works for me.
>
> Are you also looking at a u-boot driver? If not I can port your driver
> across reasonably easily.
>
I'm curious why would you need an RTC driver for u-boot?
--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v3 1/2] drivers: rtc: add max313xx series rtc driver
2023-03-13 2:20 ` Alexandre Belloni
@ 2023-03-13 2:30 ` Chris Packham
0 siblings, 0 replies; 14+ messages in thread
From: Chris Packham @ 2023-03-13 2:30 UTC (permalink / raw)
To: Alexandre Belloni
Cc: Tilki, Ibrahim, a.zummo, jdelvare, linux, robh+dt,
krzysztof.kozlowski+dt, linux-rtc, linux-kernel, linux-hwmon,
devicetree, Arslanbenzer, Zeynep
On 13/03/23 15:20, Alexandre Belloni wrote:
> Hello,
>
> On 13/03/2023 02:15:26+0000, Chris Packham wrote:
>> Hi Ibrahim,
>>
>> On 18/02/23 04:17, Tilki, Ibrahim wrote:
>>>> Hi Ibrahim,
>>>>
>>>> On 9/11/22 01:22, Ibrahim Tilki wrote:
>>>>> Adding support for Analog Devices MAX313XX series RTCs.
>>>>>
>>>>> Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki@analog.com>
>>>>> Signed-off-by: Zeynep Arslanbenzer <Zeynep.Arslanbenzer@analog.com>
>>>>> ---
>>>>> drivers/rtc/Kconfig | 11 +
>>>>> drivers/rtc/Makefile | 1 +
>>>>> drivers/rtc/rtc-max313xx.c | 1070 ++++++++++++++++++++++++++++++++++++
>>>>> 3 files changed, 1082 insertions(+)
>>>>> create mode 100644 drivers/rtc/rtc-max313xx.c
>>>> What is the current state of this work? I see there are some comments on
>>>> this v3 iteration from late last year and I couldn't find any newer
>>>> iteration on any mailing list. We've got some new hardware arriving soon
>>>> that will have the MAX31331 RTC and I'm keen to see this patch series
>>>> land. Is there anything I can do to help it along? I can't be very
>>>> specific about when I'll see the new hardware (who can these days), the
>>>> last update was "boards are due in March".
>>>>
>>>> For the maintainers on the Cc list once the dust settles how would I get
>>>> this supported in a LTS kernel (we're currently using the 5.15 series)?
>>>> Or is totally out of the question because it's not just a new device id?
>>> Hi Chris,
>>>
>>> Patch v4 is on the way, I will be sending it in a few weeks.
>>> It is hard to tell when it is going to land but I expect to be more responsive
>>> to reviews after patch v4.
>> FYI I've now got some boards with a MAX31331. I've given v3 a quick test
>> and it works for me.
>>
>> Are you also looking at a u-boot driver? If not I can port your driver
>> across reasonably easily.
>>
> I'm curious why would you need an RTC driver for u-boot?
Short answer is because u-boot has RTC drivers and commands to set/read
them.
Slightly longer answer is that for our current products (most with a
DS1340 or something close) our initial manufacturing process includes
setting the RTC from u-boot. It's mostly a "because we've always done it
that way" but it does have the advantage that any logs or files created
on first boot get timestamped correctly. Yes we could set the clock from
userland on first boot but there would be a few odd log entries from
before the RTC was set.
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2023-03-13 2:30 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-11-08 12:22 [PATCH v3 0/2] drivers: rtc: add max313xx series rtc driver Ibrahim Tilki
2022-11-08 12:22 ` [PATCH v3 1/2] " Ibrahim Tilki
2022-11-08 12:57 ` Christophe JAILLET
2022-11-08 13:27 ` Guenter Roeck
2022-12-10 22:01 ` Alexandre Belloni
2023-02-14 20:28 ` Chris Packham
2023-02-14 21:40 ` Alexandre Belloni
2023-02-14 22:36 ` Chris Packham
2023-02-17 15:17 ` Tilki, Ibrahim
2023-02-19 20:19 ` Chris Packham
2023-03-13 2:15 ` Chris Packham
2023-03-13 2:20 ` Alexandre Belloni
2023-03-13 2:30 ` Chris Packham
2022-11-08 12:22 ` [PATCH v3 2/2] dt-bindings: rtc: add max313xx RTCs Ibrahim Tilki
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).