From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 80550C4332F for ; Wed, 23 Nov 2022 06:19:33 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S236061AbiKWGTc (ORCPT ); Wed, 23 Nov 2022 01:19:32 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:57410 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S236003AbiKWGTP (ORCPT ); Wed, 23 Nov 2022 01:19:15 -0500 Received: from twspam01.aspeedtech.com (twspam01.aspeedtech.com [211.20.114.71]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 2A83F5CD0A; Tue, 22 Nov 2022 22:19:12 -0800 (PST) Received: from mail.aspeedtech.com ([192.168.0.24]) by twspam01.aspeedtech.com with ESMTP id 2AN5pU4M081940; Wed, 23 Nov 2022 13:51:32 +0800 (GMT-8) (envelope-from billy_tsai@aspeedtech.com) Received: from BillyTsai-pc.aspeed.com (192.168.2.149) by TWMBX02.aspeed.com (192.168.0.24) with Microsoft SMTP Server (TLS) id 15.0.1497.2; Wed, 23 Nov 2022 14:15:55 +0800 From: Billy Tsai To: , , , , , , , , , , , , , , , , , , CC: kernel test robot Subject: [v4 5/5] hwmon: Add Aspeed ast2600 TACH support Date: Wed, 23 Nov 2022 14:16:35 +0800 Message-ID: <20221123061635.32025-6-billy_tsai@aspeedtech.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20221123061635.32025-1-billy_tsai@aspeedtech.com> References: <20221123061635.32025-1-billy_tsai@aspeedtech.com> MIME-Version: 1.0 Content-Transfer-Encoding: 7BIT Content-Type: text/plain; charset=US-ASCII X-Originating-IP: [192.168.2.149] X-ClientProxiedBy: TWMBX02.aspeed.com (192.168.0.24) To TWMBX02.aspeed.com (192.168.0.24) X-DNSRBL: X-MAIL: twspam01.aspeedtech.com 2AN5pU4M081940 Precedence: bulk List-ID: X-Mailing-List: linux-hwmon@vger.kernel.org Add the support of Tachometer which can use to monitor the frequency of the input. The tach supports up to 16 channels and it's part function of multi-function device "pwm-tach controller". Signed-off-by: Billy Tsai Reported-by: kernel test robot --- Documentation/hwmon/index.rst | 1 + Documentation/hwmon/tach-aspeed-ast2600.rst | 24 ++ drivers/hwmon/Kconfig | 9 + drivers/hwmon/Makefile | 1 + drivers/hwmon/tach-aspeed-ast2600.c | 399 ++++++++++++++++++++ 5 files changed, 434 insertions(+) create mode 100644 Documentation/hwmon/tach-aspeed-ast2600.rst create mode 100644 drivers/hwmon/tach-aspeed-ast2600.c diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index c1d11cf13eef..8aed4c42ca89 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -193,6 +193,7 @@ Hardware Monitoring Kernel Drivers sparx5-temp stpddc60 sy7636a-hwmon + tach-aspeed-ast2600 tc654 tc74 thmc50 diff --git a/Documentation/hwmon/tach-aspeed-ast2600.rst b/Documentation/hwmon/tach-aspeed-ast2600.rst new file mode 100644 index 000000000000..4f9501b783a1 --- /dev/null +++ b/Documentation/hwmon/tach-aspeed-ast2600.rst @@ -0,0 +1,24 @@ +Kernel driver tach-aspeed-ast2600 +============================== + +Supported chips: + ASPEED AST2600 + +Authors: + + +Description: +------------ +This driver implements support for ASPEED AST2600 Fan Tacho controller. +The controller supports up to 16 tachometer inputs. + +The driver provides the following sensor accesses in sysfs: +=============== ======= ===================================================== +fanX_input ro provide current fan rotation value in RPM as reported + by the fan to the device. +fanX_div rw Fan divisor: Supported value are power of 4 (1, 4, 16 + 64, ... 4194304) + The larger divisor, the less rpm accuracy and the less + affected by fan signal glitch. +fanX_pulses rw Fan pulses per resolution. +=============== ======= ====================================================== diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 7ac3daaf59ce..3196087a7b3e 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -403,6 +403,15 @@ config SENSORS_ASPEED This driver can also be built as a module. If so, the module will be called aspeed_pwm_tacho. +config SENSORS_TACH_ASPEED_AST2600 + tristate "ASPEED ast2600 Tachometer support" + select REGMAP + help + This driver provides support for Aspeed ast2600 Tachometer. + + To compile this driver as a module, choose M here: the module + will be called tach-aspeed-ast2600. + config SENSORS_ATXP1 tristate "Attansic ATXP1 VID controller" depends on I2C diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 11d076cad8a2..50a139c7c4ca 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -53,6 +53,7 @@ obj-$(CONFIG_SENSORS_ARM_SCMI) += scmi-hwmon.o obj-$(CONFIG_SENSORS_ARM_SCPI) += scpi-hwmon.o obj-$(CONFIG_SENSORS_AS370) += as370-hwmon.o obj-$(CONFIG_SENSORS_ASC7621) += asc7621.o +obj-$(CONFIG_SENSORS_TACH_ASPEED_AST2600) += tach-aspeed-ast2600.o obj-$(CONFIG_SENSORS_ASPEED) += aspeed-pwm-tacho.o obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o obj-$(CONFIG_SENSORS_AXI_FAN_CONTROL) += axi-fan-control.o diff --git a/drivers/hwmon/tach-aspeed-ast2600.c b/drivers/hwmon/tach-aspeed-ast2600.c new file mode 100644 index 000000000000..2b8dd5eeb6ec --- /dev/null +++ b/drivers/hwmon/tach-aspeed-ast2600.c @@ -0,0 +1,399 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) ASPEED Technology Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* The channel number of Aspeed tach controller */ +#define TACH_ASPEED_NR_TACHS 16 +/* TACH Control Register */ +#define TACH_ASPEED_CTRL(ch) (((ch) * 0x10) + 0x08) +#define TACH_ASPEED_IER BIT(31) +#define TACH_ASPEED_INVERS_LIMIT BIT(30) +#define TACH_ASPEED_LOOPBACK BIT(29) +#define TACH_ASPEED_ENABLE BIT(28) +#define TACH_ASPEED_DEBOUNCE_MASK GENMASK(27, 26) +#define TACH_ASPEED_DEBOUNCE_BIT 26 +#define TACH_ASPEED_IO_EDGE_MASK GENMASK(25, 24) +#define TACH_ASPEED_IO_EDGE_BIT 24 +#define TACH_ASPEED_CLK_DIV_T_MASK GENMASK(23, 20) +#define TACH_ASPEED_CLK_DIV_BIT 20 +#define TACH_ASPEED_THRESHOLD_MASK GENMASK(19, 0) +/* [27:26] */ +#define DEBOUNCE_3_CLK 0x00 +#define DEBOUNCE_2_CLK 0x01 +#define DEBOUNCE_1_CLK 0x02 +#define DEBOUNCE_0_CLK 0x03 +/* [25:24] */ +#define F2F_EDGES 0x00 +#define R2R_EDGES 0x01 +#define BOTH_EDGES 0x02 +/* [23:20] */ +/* divisor = 4 to the nth power, n = register value */ +#define DEFAULT_TACH_DIV 1024 +#define DIV_TO_REG(divisor) (ilog2(divisor) >> 1) + +/* TACH Status Register */ +#define TACH_ASPEED_STS(ch) (((ch) * 0x10) + 0x0C) + +/*PWM_TACH_STS */ +#define TACH_ASPEED_ISR BIT(31) +#define TACH_ASPEED_PWM_OUT BIT(25) +#define TACH_ASPEED_PWM_OEN BIT(24) +#define TACH_ASPEED_DEB_INPUT BIT(23) +#define TACH_ASPEED_RAW_INPUT BIT(22) +#define TACH_ASPEED_VALUE_UPDATE BIT(21) +#define TACH_ASPEED_FULL_MEASUREMENT BIT(20) +#define TACH_ASPEED_VALUE_MASK GENMASK(19, 0) +/********************************************************** + * Software setting + *********************************************************/ +#define DEFAULT_FAN_PULSE_PR 2 +struct aspeed_tach_channel_params { + int limited_inverse; + u16 threshold; + u8 tach_edge; + u8 tach_debounce; + u8 pulse_pr; + u32 divisor; + u32 sample_period; /* unit is us */ + u32 polling_period; /* unit is us */ +}; + +struct aspeed_tach_data { + struct device *dev; + struct regmap *regmap; + struct clk *clk; + struct reset_control *reset; + bool tach_present[TACH_ASPEED_NR_TACHS]; + struct aspeed_tach_channel_params *tach_channel; +}; + +static void aspeed_tach_ch_enable(struct aspeed_tach_data *priv, u8 tach_ch, + bool enable) +{ + if (enable) + regmap_set_bits(priv->regmap, TACH_ASPEED_CTRL(tach_ch), + TACH_ASPEED_ENABLE); + else + regmap_clear_bits(priv->regmap, TACH_ASPEED_CTRL(tach_ch), + TACH_ASPEED_ENABLE); +} + +static u64 aspeed_tach_val_to_rpm(struct aspeed_tach_data *priv, u8 fan_tach_ch, + u32 tach_val) +{ + unsigned long clk_source; + u64 rpm; + u32 tach_div; + + /* + * We need the mode to determine if the tach_val is double (from + * counting both edges). + */ + if (priv->tach_channel[fan_tach_ch].tach_edge == BOTH_EDGES) + tach_val <<= 1; + + tach_div = tach_val * (priv->tach_channel[fan_tach_ch].divisor) * + (priv->tach_channel[fan_tach_ch].pulse_pr); + + clk_source = clk_get_rate(priv->clk); + dev_dbg(priv->dev, "clk %ld, tach_val %d , tach_div %d\n", clk_source, + tach_val, tach_div); + + rpm = (u64)clk_source * 60; + do_div(rpm, tach_div); + + return rpm; +} + +static int aspeed_get_fan_tach_ch_rpm(struct aspeed_tach_data *priv, + u8 fan_tach_ch) +{ + u32 val; + u64 rpm; + int ret; + + ret = regmap_read(priv->regmap, TACH_ASPEED_STS(fan_tach_ch), &val); + + if (ret) + return ret; + + if (!(val & TACH_ASPEED_FULL_MEASUREMENT)) + return 0; + rpm = aspeed_tach_val_to_rpm(priv, fan_tach_ch, + val & TACH_ASPEED_VALUE_MASK); + + return rpm; +} + +static int aspeed_tach_hwmon_read(struct device *dev, + enum hwmon_sensor_types type, u32 attr, + int channel, long *val) +{ + struct aspeed_tach_data *priv = dev_get_drvdata(dev); + u32 reg_val; + int ret; + + switch (attr) { + case hwmon_fan_input: + ret = aspeed_get_fan_tach_ch_rpm(priv, channel); + if (ret < 0) + return ret; + *val = ret; + break; + case hwmon_fan_div: + regmap_read(priv->regmap, TACH_ASPEED_CTRL(channel), ®_val); + reg_val = FIELD_GET(TACH_ASPEED_CLK_DIV_T_MASK, reg_val); + *val = BIT(reg_val << 1); + break; + case hwmon_fan_pulses: + *val = priv->tach_channel[channel].pulse_pr; + break; + default: + return -EOPNOTSUPP; + } + return 0; +} + +static int aspeed_tach_hwmon_write(struct device *dev, + enum hwmon_sensor_types type, u32 attr, + int channel, long val) +{ + struct aspeed_tach_data *priv = dev_get_drvdata(dev); + + switch (attr) { + case hwmon_fan_div: + if (!(is_power_of_2(val) && !(ilog2(val) % 2))) { + dev_err(dev, + "fan_div value %ld not supported. Only support power of 4\n", + val); + return -EINVAL; + } + priv->tach_channel[channel].divisor = val; + regmap_write_bits(priv->regmap, TACH_ASPEED_CTRL(channel), + TACH_ASPEED_CLK_DIV_T_MASK, + DIV_TO_REG(priv->tach_channel[channel].divisor) + << TACH_ASPEED_CLK_DIV_BIT); + break; + case hwmon_fan_pulses: + priv->tach_channel[channel].pulse_pr = val; + break; + default: + return -EOPNOTSUPP; + } + + return 0; +} + +static umode_t aspeed_tach_dev_is_visible(const void *drvdata, + enum hwmon_sensor_types type, + u32 attr, int channel) +{ + const struct aspeed_tach_data *priv = drvdata; + + if (!priv->tach_present[channel]) + return 0; + switch (attr) { + case hwmon_fan_input: + return 0444; + case hwmon_fan_div: + case hwmon_fan_pulses: + return 0644; + } + return 0; +} + +static const struct hwmon_ops aspeed_tach_ops = { + .is_visible = aspeed_tach_dev_is_visible, + .read = aspeed_tach_hwmon_read, + .write = aspeed_tach_hwmon_write, +}; + +static const struct hwmon_channel_info *aspeed_tach_info[] = { + HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT | HWMON_F_DIV | HWMON_F_PULSES, + HWMON_F_INPUT | HWMON_F_DIV | HWMON_F_PULSES, + HWMON_F_INPUT | HWMON_F_DIV | HWMON_F_PULSES, + HWMON_F_INPUT | HWMON_F_DIV | HWMON_F_PULSES, + HWMON_F_INPUT | HWMON_F_DIV | HWMON_F_PULSES, + HWMON_F_INPUT | HWMON_F_DIV | HWMON_F_PULSES, + HWMON_F_INPUT | HWMON_F_DIV | HWMON_F_PULSES, + HWMON_F_INPUT | HWMON_F_DIV | HWMON_F_PULSES, + HWMON_F_INPUT | HWMON_F_DIV | HWMON_F_PULSES, + HWMON_F_INPUT | HWMON_F_DIV | HWMON_F_PULSES, + HWMON_F_INPUT | HWMON_F_DIV | HWMON_F_PULSES, + HWMON_F_INPUT | HWMON_F_DIV | HWMON_F_PULSES, + HWMON_F_INPUT | HWMON_F_DIV | HWMON_F_PULSES, + HWMON_F_INPUT | HWMON_F_DIV | HWMON_F_PULSES, + HWMON_F_INPUT | HWMON_F_DIV | HWMON_F_PULSES, + HWMON_F_INPUT | HWMON_F_DIV | HWMON_F_PULSES), + NULL +}; + +static const struct hwmon_chip_info aspeed_tach_chip_info = { + .ops = &aspeed_tach_ops, + .info = aspeed_tach_info, +}; + +static void aspeed_create_fan_tach_channel(struct aspeed_tach_data *priv, + u32 tach_ch) +{ + priv->tach_present[tach_ch] = true; + priv->tach_channel[tach_ch].limited_inverse = 0; + regmap_write_bits(priv->regmap, TACH_ASPEED_CTRL(tach_ch), + TACH_ASPEED_INVERS_LIMIT, + priv->tach_channel[tach_ch].limited_inverse ? + TACH_ASPEED_INVERS_LIMIT : + 0); + + priv->tach_channel[tach_ch].tach_debounce = DEBOUNCE_3_CLK; + regmap_write_bits(priv->regmap, TACH_ASPEED_CTRL(tach_ch), + TACH_ASPEED_DEBOUNCE_MASK, + priv->tach_channel[tach_ch].tach_debounce + << TACH_ASPEED_DEBOUNCE_BIT); + + priv->tach_channel[tach_ch].tach_edge = F2F_EDGES; + regmap_write_bits(priv->regmap, TACH_ASPEED_CTRL(tach_ch), + TACH_ASPEED_IO_EDGE_MASK, + priv->tach_channel[tach_ch].tach_edge + << TACH_ASPEED_IO_EDGE_BIT); + + priv->tach_channel[tach_ch].divisor = DEFAULT_TACH_DIV; + regmap_write_bits(priv->regmap, TACH_ASPEED_CTRL(tach_ch), + TACH_ASPEED_CLK_DIV_T_MASK, + DIV_TO_REG(priv->tach_channel[tach_ch].divisor) + << TACH_ASPEED_CLK_DIV_BIT); + + priv->tach_channel[tach_ch].threshold = 0; + regmap_write_bits(priv->regmap, TACH_ASPEED_CTRL(tach_ch), + TACH_ASPEED_THRESHOLD_MASK, + priv->tach_channel[tach_ch].threshold); + + priv->tach_channel[tach_ch].pulse_pr = DEFAULT_FAN_PULSE_PR; + + aspeed_tach_ch_enable(priv, tach_ch, true); +} + +static int aspeed_tach_create_fan(struct device *dev, struct device_node *child, + struct aspeed_tach_data *priv) +{ + u32 tach_channel; + int ret; + + ret = of_property_read_u32(child, "reg", &tach_channel); + if (ret) + return ret; + + aspeed_create_fan_tach_channel(priv, tach_channel); + + return 0; +} + +static void aspeed_tach_reset_assert(void *data) +{ + struct reset_control *rst = data; + + reset_control_assert(rst); +} + +static int aspeed_tach_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np, *child; + struct aspeed_tach_data *priv; + struct device *hwmon; + struct platform_device *parent_dev; + int ret; + + np = dev->parent->of_node; + if (!of_device_is_compatible(np, "aspeed,ast2600-pwm-tach")) + return dev_err_probe(dev, -ENODEV, + "Unsupported tach device binding\n"); + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + priv->dev = &pdev->dev; + priv->tach_channel = + devm_kcalloc(dev, TACH_ASPEED_NR_TACHS, + sizeof(*priv->tach_channel), GFP_KERNEL); + if (!priv->tach_channel) + return -ENOMEM; + + priv->regmap = syscon_node_to_regmap(np); + if (IS_ERR(priv->regmap)) + return dev_err_probe(dev, PTR_ERR(priv->regmap), + "Couldn't get regmap\n"); + parent_dev = of_find_device_by_node(np); + priv->clk = devm_clk_get_enabled(&parent_dev->dev, NULL); + if (IS_ERR(priv->clk)) + return dev_err_probe(dev, PTR_ERR(priv->clk), + "Couldn't get clock\n"); + + priv->reset = devm_reset_control_get_shared(&parent_dev->dev, NULL); + if (IS_ERR(priv->reset)) + return dev_err_probe(dev, PTR_ERR(priv->reset), + "Couldn't get reset control\n"); + + ret = reset_control_deassert(priv->reset); + if (ret) + return dev_err_probe(dev, ret, + "Couldn't deassert reset control\n"); + + ret = devm_add_action_or_reset(dev, aspeed_tach_reset_assert, + priv->reset); + if (ret) + return ret; + + for_each_child_of_node(dev->of_node, child) { + ret = aspeed_tach_create_fan(dev, child, priv); + if (ret) { + of_node_put(child); + return ret; + } + } + + hwmon = devm_hwmon_device_register_with_info(dev, "aspeed_tach", priv, + &aspeed_tach_chip_info, NULL); + ret = PTR_ERR_OR_ZERO(hwmon); + if (ret) + return dev_err_probe(dev, ret, + "Failed to register hwmon device\n"); + return 0; +} + +static const struct of_device_id of_stach_match_table[] = { + { + .compatible = "aspeed,ast2600-tach", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, of_stach_match_table); + +static struct platform_driver aspeed_tach_driver = { + .probe = aspeed_tach_probe, + .driver = { + .name = "aspeed_tach", + .of_match_table = of_stach_match_table, + }, +}; + +module_platform_driver(aspeed_tach_driver); + +MODULE_AUTHOR("Billy Tsai "); +MODULE_DESCRIPTION("Aspeed ast2600 TACH device driver"); +MODULE_LICENSE("GPL"); -- 2.25.1