* [PATCH v2 1/2] dt-bindings: hwmon: adi,ltc2992: correct unit address in example
@ 2023-01-18 17:22 Krzysztof Kozlowski
2023-01-18 17:22 ` [PATCH v2 2/2] dt-bindings: hwmon: correct indentation and style in examples Krzysztof Kozlowski
2023-01-18 18:57 ` [PATCH v2 1/2] dt-bindings: hwmon: adi,ltc2992: correct unit address in example Guenter Roeck
0 siblings, 2 replies; 4+ messages in thread
From: Krzysztof Kozlowski @ 2023-01-18 17:22 UTC (permalink / raw)
To: Michael Hennerich, Jean Delvare, Guenter Roeck, Rob Herring,
Krzysztof Kozlowski, Nuno Sá,
Robert Marko, Luka Perkov, Alexandru Tachici, Akshay Gupta,
Kun Yi, Supreeth Venkatesh, Jonathan Cameron, Linus Walleij,
Eric Tremblay, linux-hwmon, devicetree, linux-kernel
Cc: Krzysztof Kozlowski, Rob Herring
lower-case hex is expected for unit addresses:
adi,ltc2992.example.dts:22.24-38.15: Warning (i2c_bus_reg): /example-0/i2c/ltc2992@6F: I2C bus unit address format error, expected "6f"
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Changes since v1:
1. Add Rb tag
2. Reorder patches to silence warnings.
---
Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml
index 64a8fcb7bc46..ec984248219e 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml
@@ -59,12 +59,12 @@ examples:
#address-cells = <1>;
#size-cells = <0>;
- ltc2992@6F {
+ ltc2992@6f {
#address-cells = <1>;
#size-cells = <0>;
compatible = "adi,ltc2992";
- reg = <0x6F>;
+ reg = <0x6f>;
channel@0 {
reg = <0x0>;
--
2.34.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH v2 2/2] dt-bindings: hwmon: correct indentation and style in examples
2023-01-18 17:22 [PATCH v2 1/2] dt-bindings: hwmon: adi,ltc2992: correct unit address in example Krzysztof Kozlowski
@ 2023-01-18 17:22 ` Krzysztof Kozlowski
2023-01-18 18:57 ` Guenter Roeck
2023-01-18 18:57 ` [PATCH v2 1/2] dt-bindings: hwmon: adi,ltc2992: correct unit address in example Guenter Roeck
1 sibling, 1 reply; 4+ messages in thread
From: Krzysztof Kozlowski @ 2023-01-18 17:22 UTC (permalink / raw)
To: Michael Hennerich, Jean Delvare, Guenter Roeck, Rob Herring,
Krzysztof Kozlowski, Nuno Sá,
Robert Marko, Luka Perkov, Alexandru Tachici, Akshay Gupta,
Kun Yi, Supreeth Venkatesh, Jonathan Cameron, Linus Walleij,
Eric Tremblay, linux-hwmon, devicetree, linux-kernel
Cc: Krzysztof Kozlowski, Rob Herring
Fix mixed indentation to 4-spaces, remove unnecessary suffix from
i2c node name and use lower-case hex. No functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Changes since v1:
1. Add Rb tag
2. Reorder patches to silence warnings.
---
.../bindings/hwmon/adi,adm1177.yaml | 12 ++---
.../bindings/hwmon/adi,adm1266.yaml | 6 +--
.../bindings/hwmon/adi,axi-fan-control.yaml | 20 ++++-----
.../bindings/hwmon/adi,ltc2947.yaml | 20 ++++-----
.../bindings/hwmon/adi,ltc2992.yaml | 26 +++++------
.../devicetree/bindings/hwmon/amd,sbrmi.yaml | 6 +--
.../devicetree/bindings/hwmon/amd,sbtsi.yaml | 6 +--
.../devicetree/bindings/hwmon/iio-hwmon.yaml | 8 ++--
.../bindings/hwmon/national,lm90.yaml | 44 +++++++++----------
.../bindings/hwmon/ntc-thermistor.yaml | 2 +-
.../bindings/hwmon/nuvoton,nct7802.yaml | 16 +++----
.../devicetree/bindings/hwmon/ti,tmp513.yaml | 22 +++++-----
.../bindings/hwmon/ti,tps23861.yaml | 16 +++----
13 files changed, 102 insertions(+), 102 deletions(-)
diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
index d794deb08bb7..ca2b47320689 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
@@ -52,16 +52,16 @@ examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
pwmon@5a {
- compatible = "adi,adm1177";
- reg = <0x5a>;
- shunt-resistor-micro-ohms = <50000>; /* 50 mOhm */
- adi,shutdown-threshold-microamp = <1059000>; /* 1.059 A */
- adi,vrange-high-enable;
+ compatible = "adi,adm1177";
+ reg = <0x5a>;
+ shunt-resistor-micro-ohms = <50000>; /* 50 mOhm */
+ adi,shutdown-threshold-microamp = <1059000>; /* 1.059 A */
+ adi,vrange-high-enable;
};
};
...
diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml
index 43b4f4f57b49..4f8e11bd5142 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml
@@ -39,13 +39,13 @@ additionalProperties: false
examples:
- |
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
adm1266@40 {
- compatible = "adi,adm1266";
- reg = <0x40>;
+ compatible = "adi,adm1266";
+ reg = <0x40>;
};
};
...
diff --git a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
index f2f99afb3a3b..0cf3ed6212a6 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
@@ -49,15 +49,15 @@ additionalProperties: false
examples:
- |
fpga_axi: fpga-axi {
- #address-cells = <0x2>;
- #size-cells = <0x1>;
-
- axi_fan_control: axi-fan-control@80000000 {
- compatible = "adi,axi-fan-control-1.00.a";
- reg = <0x0 0x80000000 0x10000>;
- clocks = <&clk 71>;
- interrupts = <0 110 0>;
- pulses-per-revolution = <2>;
- };
+ #address-cells = <0x2>;
+ #size-cells = <0x1>;
+
+ axi_fan_control: axi-fan-control@80000000 {
+ compatible = "adi,axi-fan-control-1.00.a";
+ reg = <0x0 0x80000000 0x10000>;
+ clocks = <&clk 71>;
+ interrupts = <0 110 0>;
+ pulses-per-revolution = <2>;
+ };
};
...
diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
index bf04151b63d2..152935334c76 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
@@ -87,15 +87,15 @@ additionalProperties: false
examples:
- |
spi {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ltc2947_spi: ltc2947@0 {
- compatible = "adi,ltc2947";
- reg = <0>;
- /* accumulation takes place always for energ1/charge1. */
- /* accumulation only on positive current for energy2/charge2. */
- adi,accumulator-ctl-pol = <0 1>;
- };
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ltc2947_spi: ltc2947@0 {
+ compatible = "adi,ltc2947";
+ reg = <0>;
+ /* accumulation takes place always for energ1/charge1. */
+ /* accumulation only on positive current for energy2/charge2. */
+ adi,accumulator-ctl-pol = <0 1>;
+ };
};
...
diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml
index ec984248219e..dba74f400bc2 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml
@@ -55,26 +55,26 @@ additionalProperties: false
examples:
- |
- i2c1 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
ltc2992@6f {
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- compatible = "adi,ltc2992";
- reg = <0x6f>;
+ compatible = "adi,ltc2992";
+ reg = <0x6f>;
- channel@0 {
- reg = <0x0>;
- shunt-resistor-micro-ohms = <10000>;
- };
+ channel@0 {
+ reg = <0x0>;
+ shunt-resistor-micro-ohms = <10000>;
+ };
- channel@1 {
- reg = <0x1>;
- shunt-resistor-micro-ohms = <10000>;
- };
+ channel@1 {
+ reg = <0x1>;
+ shunt-resistor-micro-ohms = <10000>;
+ };
};
};
...
diff --git a/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml b/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml
index 7598b083979c..353d81d89bf5 100644
--- a/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml
+++ b/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml
@@ -41,13 +41,13 @@ additionalProperties: false
examples:
- |
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
sbrmi@3c {
- compatible = "amd,sbrmi";
- reg = <0x3c>;
+ compatible = "amd,sbrmi";
+ reg = <0x3c>;
};
};
...
diff --git a/Documentation/devicetree/bindings/hwmon/amd,sbtsi.yaml b/Documentation/devicetree/bindings/hwmon/amd,sbtsi.yaml
index 446b09f1ce94..75088244a274 100644
--- a/Documentation/devicetree/bindings/hwmon/amd,sbtsi.yaml
+++ b/Documentation/devicetree/bindings/hwmon/amd,sbtsi.yaml
@@ -42,13 +42,13 @@ additionalProperties: false
examples:
- |
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
sbtsi@4c {
- compatible = "amd,sbtsi";
- reg = <0x4c>;
+ compatible = "amd,sbtsi";
+ reg = <0x4c>;
};
};
...
diff --git a/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml
index e1ccbd30e0eb..c54b5986b365 100644
--- a/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml
+++ b/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml
@@ -31,7 +31,7 @@ additionalProperties: false
examples:
- |
- iio-hwmon {
- compatible = "iio-hwmon";
- io-channels = <&adc 1>, <&adc 2>;
- };
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 1>, <&adc 2>;
+ };
diff --git a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml
index e1719839faf0..7b9d48d6d6da 100644
--- a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml
+++ b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml
@@ -198,30 +198,30 @@ examples:
};
- |
i2c {
- #address-cells = <1>;
- #size-cells = <0>;
-
- sensor@4c {
- compatible = "adi,adt7481";
- reg = <0x4c>;
#address-cells = <1>;
#size-cells = <0>;
- channel@0 {
- reg = <0x0>;
- label = "local";
- };
-
- channel@1 {
- reg = <0x1>;
- label = "front";
- temperature-offset-millicelsius = <4000>;
- };
-
- channel@2 {
- reg = <0x2>;
- label = "back";
- temperature-offset-millicelsius = <750>;
+ sensor@4c {
+ compatible = "adi,adt7481";
+ reg = <0x4c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ reg = <0x0>;
+ label = "local";
+ };
+
+ channel@1 {
+ reg = <0x1>;
+ label = "front";
+ temperature-offset-millicelsius = <4000>;
+ };
+
+ channel@2 {
+ reg = <0x2>;
+ label = "back";
+ temperature-offset-millicelsius = <750>;
+ };
};
- };
};
diff --git a/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml b/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml
index 6a1920712fb9..3d0146e20d3e 100644
--- a/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml
+++ b/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml
@@ -131,7 +131,7 @@ additionalProperties: false
examples:
- |
- thermistor0 {
+ thermistor {
compatible = "murata,ncp18wb473";
io-channels = <&gpadc 0x06>;
pullup-uv = <1800000>;
diff --git a/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml b/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml
index 2f0620ecccc9..cd8dcd797031 100644
--- a/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml
+++ b/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml
@@ -123,23 +123,23 @@ examples:
#size-cells = <0>;
channel@0 { /* LTD */
- reg = <0>;
+ reg = <0>;
};
channel@1 { /* RTD1 */
- reg = <1>;
- sensor-type = "voltage";
+ reg = <1>;
+ sensor-type = "voltage";
};
channel@2 { /* RTD2 */
- reg = <2>;
- sensor-type = "temperature";
- temperature-mode = "thermal-diode";
+ reg = <2>;
+ sensor-type = "temperature";
+ temperature-mode = "thermal-diode";
};
channel@3 { /* RTD3 */
- reg = <3>;
- sensor-type = "temperature";
+ reg = <3>;
+ sensor-type = "temperature";
};
};
};
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
index 1502b22c77cc..fde5225ce012 100644
--- a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
@@ -77,15 +77,15 @@ additionalProperties: false
examples:
- |
i2c {
- #address-cells = <1>;
- #size-cells = <0>;
-
- tmp513@5c {
- compatible = "ti,tmp513";
- reg = <0x5C>;
- shunt-resistor-micro-ohms = <330000>;
- ti,bus-range-microvolt = <32000000>;
- ti,pga-gain = <8>;
- ti,nfactor = <0x1 0xF3 0x00>;
- };
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tmp513@5c {
+ compatible = "ti,tmp513";
+ reg = <0x5c>;
+ shunt-resistor-micro-ohms = <330000>;
+ ti,bus-range-microvolt = <32000000>;
+ ti,pga-gain = <8>;
+ ti,nfactor = <0x1 0xf3 0x00>;
+ };
};
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml b/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml
index 3bc8e73dfbf0..bce68a326919 100644
--- a/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml
+++ b/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml
@@ -40,12 +40,12 @@ additionalProperties: false
examples:
- |
i2c {
- #address-cells = <1>;
- #size-cells = <0>;
-
- tps23861@30 {
- compatible = "ti,tps23861";
- reg = <0x30>;
- shunt-resistor-micro-ohms = <255000>;
- };
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tps23861@30 {
+ compatible = "ti,tps23861";
+ reg = <0x30>;
+ shunt-resistor-micro-ohms = <255000>;
+ };
};
--
2.34.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: hwmon: adi,ltc2992: correct unit address in example
2023-01-18 17:22 [PATCH v2 1/2] dt-bindings: hwmon: adi,ltc2992: correct unit address in example Krzysztof Kozlowski
2023-01-18 17:22 ` [PATCH v2 2/2] dt-bindings: hwmon: correct indentation and style in examples Krzysztof Kozlowski
@ 2023-01-18 18:57 ` Guenter Roeck
1 sibling, 0 replies; 4+ messages in thread
From: Guenter Roeck @ 2023-01-18 18:57 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Michael Hennerich, Jean Delvare, Rob Herring,
Krzysztof Kozlowski, Nuno Sá,
Robert Marko, Luka Perkov, Alexandru Tachici, Akshay Gupta,
Kun Yi, Supreeth Venkatesh, Jonathan Cameron, Linus Walleij,
Eric Tremblay, linux-hwmon, devicetree, linux-kernel,
Rob Herring
On Wed, Jan 18, 2023 at 06:22:36PM +0100, Krzysztof Kozlowski wrote:
> lower-case hex is expected for unit addresses:
>
> adi,ltc2992.example.dts:22.24-38.15: Warning (i2c_bus_reg): /example-0/i2c/ltc2992@6F: I2C bus unit address format error, expected "6f"
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Reviewed-by: Rob Herring <robh@kernel.org>
Applied to hwmon-next.
Thanks,
Guenter
> ---
>
> Changes since v1:
> 1. Add Rb tag
> 2. Reorder patches to silence warnings.
> ---
> Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml
> index 64a8fcb7bc46..ec984248219e 100644
> --- a/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml
> @@ -59,12 +59,12 @@ examples:
> #address-cells = <1>;
> #size-cells = <0>;
>
> - ltc2992@6F {
> + ltc2992@6f {
> #address-cells = <1>;
> #size-cells = <0>;
>
> compatible = "adi,ltc2992";
> - reg = <0x6F>;
> + reg = <0x6f>;
>
> channel@0 {
> reg = <0x0>;
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v2 2/2] dt-bindings: hwmon: correct indentation and style in examples
2023-01-18 17:22 ` [PATCH v2 2/2] dt-bindings: hwmon: correct indentation and style in examples Krzysztof Kozlowski
@ 2023-01-18 18:57 ` Guenter Roeck
0 siblings, 0 replies; 4+ messages in thread
From: Guenter Roeck @ 2023-01-18 18:57 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Michael Hennerich, Jean Delvare, Rob Herring,
Krzysztof Kozlowski, Nuno Sá,
Robert Marko, Luka Perkov, Alexandru Tachici, Akshay Gupta,
Kun Yi, Supreeth Venkatesh, Jonathan Cameron, Linus Walleij,
Eric Tremblay, linux-hwmon, devicetree, linux-kernel,
Rob Herring
On Wed, Jan 18, 2023 at 06:22:37PM +0100, Krzysztof Kozlowski wrote:
> Fix mixed indentation to 4-spaces, remove unnecessary suffix from
> i2c node name and use lower-case hex. No functional impact.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Reviewed-by: Rob Herring <robh@kernel.org>
Applied to hwmon-next.
Thanks,
Guenter
> ---
>
> Changes since v1:
> 1. Add Rb tag
> 2. Reorder patches to silence warnings.
> ---
> .../bindings/hwmon/adi,adm1177.yaml | 12 ++---
> .../bindings/hwmon/adi,adm1266.yaml | 6 +--
> .../bindings/hwmon/adi,axi-fan-control.yaml | 20 ++++-----
> .../bindings/hwmon/adi,ltc2947.yaml | 20 ++++-----
> .../bindings/hwmon/adi,ltc2992.yaml | 26 +++++------
> .../devicetree/bindings/hwmon/amd,sbrmi.yaml | 6 +--
> .../devicetree/bindings/hwmon/amd,sbtsi.yaml | 6 +--
> .../devicetree/bindings/hwmon/iio-hwmon.yaml | 8 ++--
> .../bindings/hwmon/national,lm90.yaml | 44 +++++++++----------
> .../bindings/hwmon/ntc-thermistor.yaml | 2 +-
> .../bindings/hwmon/nuvoton,nct7802.yaml | 16 +++----
> .../devicetree/bindings/hwmon/ti,tmp513.yaml | 22 +++++-----
> .../bindings/hwmon/ti,tps23861.yaml | 16 +++----
> 13 files changed, 102 insertions(+), 102 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
> index d794deb08bb7..ca2b47320689 100644
> --- a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
> @@ -52,16 +52,16 @@ examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> - i2c0 {
> + i2c {
> #address-cells = <1>;
> #size-cells = <0>;
>
> pwmon@5a {
> - compatible = "adi,adm1177";
> - reg = <0x5a>;
> - shunt-resistor-micro-ohms = <50000>; /* 50 mOhm */
> - adi,shutdown-threshold-microamp = <1059000>; /* 1.059 A */
> - adi,vrange-high-enable;
> + compatible = "adi,adm1177";
> + reg = <0x5a>;
> + shunt-resistor-micro-ohms = <50000>; /* 50 mOhm */
> + adi,shutdown-threshold-microamp = <1059000>; /* 1.059 A */
> + adi,vrange-high-enable;
> };
> };
> ...
> diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml
> index 43b4f4f57b49..4f8e11bd5142 100644
> --- a/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml
> @@ -39,13 +39,13 @@ additionalProperties: false
>
> examples:
> - |
> - i2c0 {
> + i2c {
> #address-cells = <1>;
> #size-cells = <0>;
>
> adm1266@40 {
> - compatible = "adi,adm1266";
> - reg = <0x40>;
> + compatible = "adi,adm1266";
> + reg = <0x40>;
> };
> };
> ...
> diff --git a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
> index f2f99afb3a3b..0cf3ed6212a6 100644
> --- a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
> @@ -49,15 +49,15 @@ additionalProperties: false
> examples:
> - |
> fpga_axi: fpga-axi {
> - #address-cells = <0x2>;
> - #size-cells = <0x1>;
> -
> - axi_fan_control: axi-fan-control@80000000 {
> - compatible = "adi,axi-fan-control-1.00.a";
> - reg = <0x0 0x80000000 0x10000>;
> - clocks = <&clk 71>;
> - interrupts = <0 110 0>;
> - pulses-per-revolution = <2>;
> - };
> + #address-cells = <0x2>;
> + #size-cells = <0x1>;
> +
> + axi_fan_control: axi-fan-control@80000000 {
> + compatible = "adi,axi-fan-control-1.00.a";
> + reg = <0x0 0x80000000 0x10000>;
> + clocks = <&clk 71>;
> + interrupts = <0 110 0>;
> + pulses-per-revolution = <2>;
> + };
> };
> ...
> diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
> index bf04151b63d2..152935334c76 100644
> --- a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
> @@ -87,15 +87,15 @@ additionalProperties: false
> examples:
> - |
> spi {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - ltc2947_spi: ltc2947@0 {
> - compatible = "adi,ltc2947";
> - reg = <0>;
> - /* accumulation takes place always for energ1/charge1. */
> - /* accumulation only on positive current for energy2/charge2. */
> - adi,accumulator-ctl-pol = <0 1>;
> - };
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ltc2947_spi: ltc2947@0 {
> + compatible = "adi,ltc2947";
> + reg = <0>;
> + /* accumulation takes place always for energ1/charge1. */
> + /* accumulation only on positive current for energy2/charge2. */
> + adi,accumulator-ctl-pol = <0 1>;
> + };
> };
> ...
> diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml
> index ec984248219e..dba74f400bc2 100644
> --- a/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml
> @@ -55,26 +55,26 @@ additionalProperties: false
>
> examples:
> - |
> - i2c1 {
> + i2c {
> #address-cells = <1>;
> #size-cells = <0>;
>
> ltc2992@6f {
> - #address-cells = <1>;
> - #size-cells = <0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
>
> - compatible = "adi,ltc2992";
> - reg = <0x6f>;
> + compatible = "adi,ltc2992";
> + reg = <0x6f>;
>
> - channel@0 {
> - reg = <0x0>;
> - shunt-resistor-micro-ohms = <10000>;
> - };
> + channel@0 {
> + reg = <0x0>;
> + shunt-resistor-micro-ohms = <10000>;
> + };
>
> - channel@1 {
> - reg = <0x1>;
> - shunt-resistor-micro-ohms = <10000>;
> - };
> + channel@1 {
> + reg = <0x1>;
> + shunt-resistor-micro-ohms = <10000>;
> + };
> };
> };
> ...
> diff --git a/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml b/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml
> index 7598b083979c..353d81d89bf5 100644
> --- a/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml
> @@ -41,13 +41,13 @@ additionalProperties: false
>
> examples:
> - |
> - i2c0 {
> + i2c {
> #address-cells = <1>;
> #size-cells = <0>;
>
> sbrmi@3c {
> - compatible = "amd,sbrmi";
> - reg = <0x3c>;
> + compatible = "amd,sbrmi";
> + reg = <0x3c>;
> };
> };
> ...
> diff --git a/Documentation/devicetree/bindings/hwmon/amd,sbtsi.yaml b/Documentation/devicetree/bindings/hwmon/amd,sbtsi.yaml
> index 446b09f1ce94..75088244a274 100644
> --- a/Documentation/devicetree/bindings/hwmon/amd,sbtsi.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/amd,sbtsi.yaml
> @@ -42,13 +42,13 @@ additionalProperties: false
>
> examples:
> - |
> - i2c0 {
> + i2c {
> #address-cells = <1>;
> #size-cells = <0>;
>
> sbtsi@4c {
> - compatible = "amd,sbtsi";
> - reg = <0x4c>;
> + compatible = "amd,sbtsi";
> + reg = <0x4c>;
> };
> };
> ...
> diff --git a/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml
> index e1ccbd30e0eb..c54b5986b365 100644
> --- a/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml
> @@ -31,7 +31,7 @@ additionalProperties: false
>
> examples:
> - |
> - iio-hwmon {
> - compatible = "iio-hwmon";
> - io-channels = <&adc 1>, <&adc 2>;
> - };
> + iio-hwmon {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 1>, <&adc 2>;
> + };
> diff --git a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml
> index e1719839faf0..7b9d48d6d6da 100644
> --- a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml
> @@ -198,30 +198,30 @@ examples:
> };
> - |
> i2c {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - sensor@4c {
> - compatible = "adi,adt7481";
> - reg = <0x4c>;
> #address-cells = <1>;
> #size-cells = <0>;
>
> - channel@0 {
> - reg = <0x0>;
> - label = "local";
> - };
> -
> - channel@1 {
> - reg = <0x1>;
> - label = "front";
> - temperature-offset-millicelsius = <4000>;
> - };
> -
> - channel@2 {
> - reg = <0x2>;
> - label = "back";
> - temperature-offset-millicelsius = <750>;
> + sensor@4c {
> + compatible = "adi,adt7481";
> + reg = <0x4c>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + channel@0 {
> + reg = <0x0>;
> + label = "local";
> + };
> +
> + channel@1 {
> + reg = <0x1>;
> + label = "front";
> + temperature-offset-millicelsius = <4000>;
> + };
> +
> + channel@2 {
> + reg = <0x2>;
> + label = "back";
> + temperature-offset-millicelsius = <750>;
> + };
> };
> - };
> };
> diff --git a/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml b/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml
> index 6a1920712fb9..3d0146e20d3e 100644
> --- a/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml
> @@ -131,7 +131,7 @@ additionalProperties: false
>
> examples:
> - |
> - thermistor0 {
> + thermistor {
> compatible = "murata,ncp18wb473";
> io-channels = <&gpadc 0x06>;
> pullup-uv = <1800000>;
> diff --git a/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml b/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml
> index 2f0620ecccc9..cd8dcd797031 100644
> --- a/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml
> @@ -123,23 +123,23 @@ examples:
> #size-cells = <0>;
>
> channel@0 { /* LTD */
> - reg = <0>;
> + reg = <0>;
> };
>
> channel@1 { /* RTD1 */
> - reg = <1>;
> - sensor-type = "voltage";
> + reg = <1>;
> + sensor-type = "voltage";
> };
>
> channel@2 { /* RTD2 */
> - reg = <2>;
> - sensor-type = "temperature";
> - temperature-mode = "thermal-diode";
> + reg = <2>;
> + sensor-type = "temperature";
> + temperature-mode = "thermal-diode";
> };
>
> channel@3 { /* RTD3 */
> - reg = <3>;
> - sensor-type = "temperature";
> + reg = <3>;
> + sensor-type = "temperature";
> };
> };
> };
> diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
> index 1502b22c77cc..fde5225ce012 100644
> --- a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
> @@ -77,15 +77,15 @@ additionalProperties: false
> examples:
> - |
> i2c {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - tmp513@5c {
> - compatible = "ti,tmp513";
> - reg = <0x5C>;
> - shunt-resistor-micro-ohms = <330000>;
> - ti,bus-range-microvolt = <32000000>;
> - ti,pga-gain = <8>;
> - ti,nfactor = <0x1 0xF3 0x00>;
> - };
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + tmp513@5c {
> + compatible = "ti,tmp513";
> + reg = <0x5c>;
> + shunt-resistor-micro-ohms = <330000>;
> + ti,bus-range-microvolt = <32000000>;
> + ti,pga-gain = <8>;
> + ti,nfactor = <0x1 0xf3 0x00>;
> + };
> };
> diff --git a/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml b/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml
> index 3bc8e73dfbf0..bce68a326919 100644
> --- a/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml
> @@ -40,12 +40,12 @@ additionalProperties: false
> examples:
> - |
> i2c {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - tps23861@30 {
> - compatible = "ti,tps23861";
> - reg = <0x30>;
> - shunt-resistor-micro-ohms = <255000>;
> - };
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + tps23861@30 {
> + compatible = "ti,tps23861";
> + reg = <0x30>;
> + shunt-resistor-micro-ohms = <255000>;
> + };
> };
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2023-01-18 18:58 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-01-18 17:22 [PATCH v2 1/2] dt-bindings: hwmon: adi,ltc2992: correct unit address in example Krzysztof Kozlowski
2023-01-18 17:22 ` [PATCH v2 2/2] dt-bindings: hwmon: correct indentation and style in examples Krzysztof Kozlowski
2023-01-18 18:57 ` Guenter Roeck
2023-01-18 18:57 ` [PATCH v2 1/2] dt-bindings: hwmon: adi,ltc2992: correct unit address in example Guenter Roeck
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).