From: Frank Crawford <frank@crawford.emu.id.au>
To: Jean Delvare <jdelvare@suse.com>, Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org, Frank Crawford <frank@crawford.emu.id.au>
Subject: [PATCH v2 6/7] hwmon: (it87) Add new chipset IT87952E
Date: Fri, 27 Jan 2023 15:41:15 +1100 [thread overview]
Message-ID: <20230127044116.1257799-7-frank@crawford.emu.id.au> (raw)
In-Reply-To: <20230127044116.1257799-1-frank@crawford.emu.id.au>
Add IT87952E, a new chip ID (DEV ID 0x8695), which appears to be an
updated version of the IT8792E and takes the same configuration.
The model name comes from the model name printed on the chip.
There is no datasheet publicly available.
Signed-off-by: Frank Crawford <frank@crawford.emu.id.au>
---
v2:
* Make use of feature flag for definition.
---
drivers/hwmon/it87.c | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index f41da0896097..fdba5873434a 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -34,6 +34,7 @@
* IT8786E Super I/O chip w/LPC interface
* IT8790E Super I/O chip w/LPC interface
* IT8792E Super I/O chip w/LPC interface
+ * IT87952E Super I/O chip w/LPC interface
* Sis950 A clone of the IT8705F
*
* Copyright (C) 2001 Chris Gauthron
@@ -63,7 +64,7 @@
enum chips { it87, it8712, it8716, it8718, it8720, it8721, it8728, it8732,
it8771, it8772, it8781, it8782, it8783, it8786, it8790,
- it8792, it8603, it8620, it8622, it8628 };
+ it8792, it8603, it8620, it8622, it8628, it87952 };
static struct platform_device *it87_pdev[2];
@@ -160,6 +161,7 @@ static inline void superio_exit(int ioreg, bool noexit)
#define IT8622E_DEVID 0x8622
#define IT8623E_DEVID 0x8623
#define IT8628E_DEVID 0x8628
+#define IT87952E_DEVID 0x8695
#define IT87_ACT_REG 0x30
#define IT87_BASE_REG 0x60
@@ -477,6 +479,15 @@ static const struct it87_devices it87_devices[] = {
| FEAT_SIX_TEMP | FEAT_VIN3_5V,
.peci_mask = 0x07,
},
+ [it87952] = {
+ .name = "it87952",
+ .model = "IT87952E",
+ .features = FEAT_NEWER_AUTOPWM | FEAT_16BIT_FANS
+ | FEAT_TEMP_OFFSET | FEAT_TEMP_OLD_PECI | FEAT_TEMP_PECI
+ | FEAT_10_9MV_ADC | FEAT_IN7_INTERNAL | FEAT_CONF_NOEXIT,
+ .peci_mask = 0x07,
+ .old_peci_mask = 0x02, /* Actually reports PCH */
+ },
};
#define has_16bit_fans(data) ((data)->features & FEAT_16BIT_FANS)
@@ -2497,6 +2508,9 @@ static int __init it87_find(int sioaddr, unsigned short *address,
case IT8628E_DEVID:
sio_data->type = it8628;
break;
+ case IT87952E_DEVID:
+ sio_data->type = it87952;
+ break;
case 0xffff: /* No device at all */
goto exit;
default:
--
2.39.1
next prev parent reply other threads:[~2023-01-27 4:41 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-27 4:41 [PATCH v2 0/7] hwmon: (it87) Complete handling multi-chip configuration Frank Crawford
2023-01-27 4:41 ` [PATCH v2 1/7] hwmon: (it87) Allow disabling exiting of configuration mode Frank Crawford
2023-01-27 4:41 ` [PATCH v2 2/7] hwmon: (it87) Disable configuration exit for certain chips Frank Crawford
2023-01-27 4:41 ` [PATCH v2 3/7] hwmon: (it87) List full chip model name Frank Crawford
2023-01-27 4:41 ` [PATCH v2 4/7] hwmon: (it87) Add chip_id in some info message Frank Crawford
2023-01-27 4:41 ` [PATCH v2 5/7] hwmon: (it87) Allow multiple chip IDs for force_id Frank Crawford
2023-01-27 4:41 ` Frank Crawford [this message]
2023-01-27 4:41 ` [PATCH v2 7/7] hwmon: (it87) Updated documentation for recent updates to it87 Frank Crawford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230127044116.1257799-7-frank@crawford.emu.id.au \
--to=frank@crawford.emu.id.au \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux@roeck-us.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).