[PATCH v5] dt-bindings: hwmon: lm87: convert to YAML

[Li peiyu <579lpy@gmail.com>]

Convert the lm87 hwmon sensor bindings to DT schema

Signed-off-by: Li peiyu <579lpy@gmail.com>
---
Change for v5:
- Change the file name to "ti,lm87.yaml"
- Add maintainers get by get_maintainers.pl
Changes for v4:
- remove excess spaces
Changes for v3:
- add type definition of has-temp3, has-in6, has-in7
- Change the description of has-temp3
Changes for v2:
- replace node name lm87 with sensor
- replace character '\t' with spaces

 .../devicetree/bindings/hwmon/lm87.txt        | 30 ---------
 .../devicetree/bindings/hwmon/ti,lm87.yaml    | 63 +++++++++++++++++++
 2 files changed, 63 insertions(+), 30 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/hwmon/lm87.txt
 create mode 100644 Documentation/devicetree/bindings/hwmon/ti,lm87.yaml

diff --git a/Documentation/devicetree/bindings/hwmon/lm87.txt b/Documentation/devicetree/bindings/hwmon/lm87.txt
deleted file mode 100644
index 758ff398b67b..000000000000
--- a/Documentation/devicetree/bindings/hwmon/lm87.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-*LM87 hwmon sensor.
-
-Required properties:
-- compatible: Should be
-	"ti,lm87"
-
-- reg: I2C address
-
-optional properties:
-- has-temp3: This configures pins 18 and 19 to be used as a second
-             remote temperature sensing channel. By default the pins
-             are configured as voltage input pins in0 and in5.
-
-- has-in6: When set, pin 5 is configured to be used as voltage input
-           in6. Otherwise the pin is set as FAN1 input.
-
-- has-in7: When set, pin 6 is configured to be used as voltage input
-           in7. Otherwise the pin is set as FAN2 input.
-
-- vcc-supply: a Phandle for the regulator supplying power, can be
-              configured to measure 5.0V power supply. Default is 3.3V.
-
-Example:
-
-lm87@2e {
-	compatible = "ti,lm87";
-	reg = <0x2e>;
-	has-temp3;
-	vcc-supply = <&reg_5v0>;
-};
diff --git a/Documentation/devicetree/bindings/hwmon/ti,lm87.yaml b/Documentation/devicetree/bindings/hwmon/ti,lm87.yaml
new file mode 100644
index 000000000000..6dadf181c9a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,lm87.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ti,lm87.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LM87 hwmon sensor
+
+maintainers:
+  - Jean Delvare <jdelvare@suse.com>
+  - Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
+  - Rob Herring <robh+dt@kernel.org>
+
+properties:
+  compatible:
+    const: ti,lm87
+
+  reg:
+    maxItems: 1
+
+  has-temp3:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      When set, pins 18 and 19 are configured to be used as a second
+      remote temperature sensing channel. Otherwise the pins are
+      configured as voltage input pins in0 and in5.
+
+  has-in6:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      When set, pin 5 is configured to be used as voltage input in6.
+      Otherwise the pin is set as FAN1 input.
+
+  has-in7:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      When set, pin 6 is configured to be used as voltage input in7.
+      Otherwise the pin is set as FAN2 input.
+
+  vcc-supply:
+    description: |
+      A Phandle for the regulator supplying power, can be configured to
+      measure 5.0V power supply. Default is 3.3V.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      sensor@2e {
+        compatible = "ti,lm87";
+        reg = <0x2e>;
+        has-temp3;
+        vcc-supply = <&reg_5v0>;
+      };
+    };
-- 
2.34.1