Linux-Hwmon Archive on lore.kernel.org
 help / color / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: Florian Fainelli <f.fainelli@gmail.com>, linux-kernel@vger.kernel.org
Cc: bcm-kernel-feedback-list@broadcom.com,
	Sudeep Holla <sudeep.holla@arm.com>,
	Jean Delvare <jdelvare@suse.com>,
	linux-arm-kernel@lists.infradead.org,
	"open list:HARDWARE MONITORING" <linux-hwmon@vger.kernel.org>
Subject: Re: [PATCH v3 2/2] hwmon: scmi: Scale values to target desired HWMON units
Date: Tue, 7 May 2019 16:41:54 -0700
Message-ID: <690aff21-d68c-7d62-071f-ba1c9502e5ac@roeck-us.net> (raw)
In-Reply-To: <20190507230917.21659-3-f.fainelli@gmail.com>

On 5/7/19 4:09 PM, Florian Fainelli wrote:
> If the SCMI firmware implementation is reporting values in a scale that
> is different from the HWMON units, we need to scale up or down the value
> according to how far appart they are.
> 
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
>   drivers/hwmon/scmi-hwmon.c | 43 +++++++++++++++++++++++++++++++++++++-
>   1 file changed, 42 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/hwmon/scmi-hwmon.c b/drivers/hwmon/scmi-hwmon.c
> index a80183a488c5..7820854e5954 100644
> --- a/drivers/hwmon/scmi-hwmon.c
> +++ b/drivers/hwmon/scmi-hwmon.c
> @@ -18,6 +18,47 @@ struct scmi_sensors {
>   	const struct scmi_sensor_info **info[hwmon_max];
>   };
>   
> +static inline u64 __pow10(u8 x)
> +{
> +	u64 r = 1;
> +
> +	if (unlikely(x > 18))
> +		return r;
> +

Strictly speaking that would be 19 (10^19=0x8AC7230489E80000),
and I am not sure if returning 1 in that case is such a good idea.
If you really want to handle over/underflow situations, it should
be in the calling code.

Thanks,
Guenter

> +	while (x--)
> +		r *= 10;
> +
> +	return r;
> +}
> +
> +static u64 scmi_hwmon_scale(const struct scmi_sensor_info *sensor, u64 value)
> +{
> +	s8 scale = sensor->scale;
> +	u64 f;
> +
> +	switch (sensor->type) {
> +	case TEMPERATURE_C:
> +	case VOLTAGE:
> +	case CURRENT:
> +		scale += 3;
> +		break;
> +	case POWER:
> +	case ENERGY:
> +		scale += 6;
> +		break;
> +	default:
> +		break;
> +	}
> +
> +	f = __pow10(abs(scale));
> +	if (scale > 0)
> +		value *= f;
> +	else
> +		value = div64_u64(value, f);
> +
> +        return value;
> +}
> +
>   static int scmi_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
>   			   u32 attr, int channel, long *val)
>   {
> @@ -30,7 +71,7 @@ static int scmi_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
>   	sensor = *(scmi_sensors->info[type] + channel);
>   	ret = h->sensor_ops->reading_get(h, sensor->id, false, &value);
>   	if (!ret)
> -		*val = value;
> +		*val = scmi_hwmon_scale(sensor, value);
>   
>   	return ret;
>   }
> 


  reply index

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-07 23:09 [PATCH v3 0/2] " Florian Fainelli
2019-05-07 23:09 ` [PATCH v3 1/2] firmware: arm_scmi: Fetch and store sensor scale Florian Fainelli
2019-05-07 23:09 ` [PATCH v3 2/2] hwmon: scmi: Scale values to target desired HWMON units Florian Fainelli
2019-05-07 23:41   ` Guenter Roeck [this message]
2019-05-08 11:35 ` [PATCH v3 0/2] " Sudeep Holla
2019-05-08 16:26   ` Florian Fainelli
2019-05-08 16:37     ` Guenter Roeck

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=690aff21-d68c-7d62-071f-ba1c9502e5ac@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=f.fainelli@gmail.com \
    --cc=jdelvare@suse.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sudeep.holla@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Hwmon Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-hwmon/0 linux-hwmon/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-hwmon linux-hwmon/ https://lore.kernel.org/linux-hwmon \
		linux-hwmon@vger.kernel.org linux-hwmon@archiver.kernel.org
	public-inbox-index linux-hwmon


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-hwmon


AGPL code for this site: git clone https://public-inbox.org/ public-inbox