Linux-Hwmon Archive on lore.kernel.org
 help / color / Atom feed
From: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
To: Linux Doc Mailing List <linux-doc@vger.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>,
	Mauro Carvalho Chehab <mchehab@infradead.org>,
	linux-kernel@vger.kernel.org, Jonathan Corbet <corbet@lwn.net>,
	Jean Delvare <jdelvare@suse.com>,
	Guenter Roeck <linux@roeck-us.net>,
	linux-hwmon@vger.kernel.org
Subject: [PATCH v3 16/21] docs: hwmon: da9052, da9055: convert to ReST format
Date: Wed, 17 Apr 2019 06:46:24 -0300
Message-ID: <722f0c2614ba19993fd04266063ad7c09876ff89.1555494108.git.mchehab+samsung@kernel.org> (raw)
In-Reply-To: <cover.1555494108.git.mchehab+samsung@kernel.org>

Convert da9052 and da9055 to ReST format, in order to allow
them to be parsed by Sphinx.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 Documentation/hwmon/da9052 | 41 +++++++++++++++++++++++++++-----------
 Documentation/hwmon/da9055 | 20 ++++++++++++++-----
 2 files changed, 44 insertions(+), 17 deletions(-)

diff --git a/Documentation/hwmon/da9052 b/Documentation/hwmon/da9052
index 5bc51346b689..c1c0f1f08904 100644
--- a/Documentation/hwmon/da9052
+++ b/Documentation/hwmon/da9052
@@ -1,6 +1,12 @@
+Kernel driver da9052
+====================
+
 Supported chips:
+
   * Dialog Semiconductors DA9052-BC and DA9053-AA/Bx PMICs
+
     Prefix: 'da9052'
+
     Datasheet: Datasheet is not publicly available.
 
 Authors: David Dajun Chen <dchen@diasemi.com>
@@ -15,17 +21,20 @@ different inputs. The track and hold circuit ensures stable input voltages at
 the input of the ADC during the conversion.
 
 The ADC is used to measure the following inputs:
-Channel 0: VDDOUT - measurement of the system voltage
-Channel 1: ICH - internal battery charger current measurement
-Channel 2: TBAT - output from the battery NTC
-Channel 3: VBAT - measurement of the battery voltage
-Channel 4: ADC_IN4 - high impedance input (0 - 2.5V)
-Channel 5: ADC_IN5 - high impedance input (0 - 2.5V)
-Channel 6: ADC_IN6 - high impedance input (0 - 2.5V)
-Channel 7: XY - TSI interface to measure the X and Y voltage of the touch
-	   screen resistive potentiometers
-Channel 8: Internal Tjunc. - sense (internal temp. sensor)
-Channel 9: VBBAT - measurement of the backup battery voltage
+
+========= ===================================================================
+Channel 0 VDDOUT - measurement of the system voltage
+Channel 1 ICH - internal battery charger current measurement
+Channel 2 TBAT - output from the battery NTC
+Channel 3 VBAT - measurement of the battery voltage
+Channel 4 ADC_IN4 - high impedance input (0 - 2.5V)
+Channel 5 ADC_IN5 - high impedance input (0 - 2.5V)
+Channel 6 ADC_IN6 - high impedance input (0 - 2.5V)
+Channel 7 XY - TSI interface to measure the X and Y voltage of the touch
+	  screen resistive potentiometers
+Channel 8 Internal Tjunc. - sense (internal temp. sensor)
+Channel 9 VBBAT - measurement of the backup battery voltage
+========= ===================================================================
 
 By using sysfs attributes we can measure the system voltage VDDOUT, the battery
 charging current ICH, battery temperature TBAT, battery junction temperature
@@ -37,12 +46,15 @@ Voltage Monitoring
 Voltages are sampled by a 10 bit ADC.
 
 The battery voltage is calculated as:
+
 	Milli volt = ((ADC value * 1000) / 512) + 2500
 
 The backup battery voltage is calculated as:
+
 	Milli volt = (ADC value * 2500) / 512;
 
 The voltages on ADC channels 4, 5 and 6 are calculated as:
+
 	Milli volt = (ADC value * 2500) / 1023
 
 Temperature Monitoring
@@ -52,10 +64,15 @@ Temperatures are sampled by a 10 bit ADC.  Junction and battery temperatures
 are monitored by the ADC channels.
 
 The junction temperature is calculated:
+
 	Degrees celsius = 1.708 * (TJUNC_RES - T_OFFSET) - 108.8
+
 The junction temperature attribute is supported by the driver.
 
 The battery temperature is calculated:
-	Degree Celsius = 1 / (t1 + 1/298)- 273
+
+	Degree Celsius = 1 / (t1 + 1/298) - 273
+
 where t1 = (1/B)* ln(( ADCval * 2.5)/(R25*ITBAT*255))
+
 Default values of R25, B, ITBAT are 10e3, 3380 and 50e-6 respectively.
diff --git a/Documentation/hwmon/da9055 b/Documentation/hwmon/da9055
index 855c3f536e00..beae271a3312 100644
--- a/Documentation/hwmon/da9055
+++ b/Documentation/hwmon/da9055
@@ -1,6 +1,11 @@
+Kernel driver da9055
+====================
+
 Supported chips:
   * Dialog Semiconductors DA9055 PMIC
+
     Prefix: 'da9055'
+
     Datasheet: Datasheet is not publicly available.
 
 Authors: David Dajun Chen <dchen@diasemi.com>
@@ -15,11 +20,12 @@ different inputs. The track and hold circuit ensures stable input voltages at
 the input of the ADC during the conversion.
 
 The ADC is used to measure the following inputs:
-Channel 0: VDDOUT - measurement of the system voltage
-Channel 1: ADC_IN1 - high impedance input (0 - 2.5V)
-Channel 2: ADC_IN2 - high impedance input (0 - 2.5V)
-Channel 3: ADC_IN3 - high impedance input (0 - 2.5V)
-Channel 4: Internal Tjunc. - sense (internal temp. sensor)
+
+- Channel 0: VDDOUT - measurement of the system voltage
+- Channel 1: ADC_IN1 - high impedance input (0 - 2.5V)
+- Channel 2: ADC_IN2 - high impedance input (0 - 2.5V)
+- Channel 3: ADC_IN3 - high impedance input (0 - 2.5V)
+- Channel 4: Internal Tjunc. - sense (internal temp. sensor)
 
 By using sysfs attributes we can measure the system voltage VDDOUT,
 chip junction temperature and auxiliary channels voltages.
@@ -31,9 +37,11 @@ Voltages are sampled in a AUTO mode it can be manually sampled too and results
 are stored in a 10 bit ADC.
 
 The system voltage is calculated as:
+
 	Milli volt = ((ADC value * 1000) / 85) + 2500
 
 The voltages on ADC channels 1, 2 and 3 are calculated as:
+
 	Milli volt = (ADC value * 1000) / 102
 
 Temperature Monitoring
@@ -43,5 +51,7 @@ Temperatures are sampled by a 10 bit ADC.  Junction temperatures
 are monitored by the ADC channels.
 
 The junction temperature is calculated:
+
 	Degrees celsius = -0.4084 * (ADC_RES - T_OFFSET) + 307.6332
+
 The junction temperature attribute is supported by the driver.
-- 
2.20.1


  parent reply index

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <cover.1555494108.git.mchehab+samsung@kernel.org>
2019-04-17  9:46 ` [PATCH v3 01/21] docs: hwmon: k10temp: " Mauro Carvalho Chehab
2019-04-17  9:46 ` [PATCH v3 02/21] docs: hwmon: vexpress: " Mauro Carvalho Chehab
2019-04-17 10:24   ` Liviu Dudau
2019-04-17 10:31     ` Mauro Carvalho Chehab
2019-04-17 11:29   ` Liviu Dudau
2019-04-17  9:46 ` [PATCH v3 03/21] docs: hwmon: menf21bmc: " Mauro Carvalho Chehab
2019-04-17  9:46 ` [PATCH v3 04/21] docs: hwmon: sch5627: " Mauro Carvalho Chehab
2019-04-17  9:46 ` [PATCH v3 05/21] docs: hwmon: emc2103: " Mauro Carvalho Chehab
2019-04-17  9:46 ` [PATCH v3 06/21] docs: hwmon: pc87360: " Mauro Carvalho Chehab
2019-04-17  9:46 ` [PATCH v3 07/21] docs: hwmon: fam15h_power: " Mauro Carvalho Chehab
2019-04-17  9:46 ` [PATCH v3 08/21] docs: hwmon: w83791d: " Mauro Carvalho Chehab
2019-04-17  9:46 ` [PATCH v3 09/21] docs: hwmon: coretemp: " Mauro Carvalho Chehab
2019-04-17  9:46 ` [PATCH v3 10/21] docs: hwmon: aspeed-pwm-tacho: " Mauro Carvalho Chehab
2019-04-17  9:46 ` [PATCH v3 11/21] docs: hwmon: ibmpowernv: " Mauro Carvalho Chehab
2019-04-17  9:46 ` [PATCH v3 12/21] docs: hwmon: asc7621: " Mauro Carvalho Chehab
2019-04-17  9:46 ` [PATCH v3 13/21] docs: hwmon: ads1015: " Mauro Carvalho Chehab
2019-04-17  9:46 ` [PATCH v3 14/21] docs: hwmon: dme1737, vt1211: " Mauro Carvalho Chehab
2019-04-17  9:46 ` [PATCH v3 15/21] docs: hwmon: wm831x, wm8350: " Mauro Carvalho Chehab
2019-04-17  9:46 ` Mauro Carvalho Chehab [this message]
2019-04-17  9:46 ` [PATCH v3 17/21] docs: hwmon: k8temp, w83793: " Mauro Carvalho Chehab
2019-04-17  9:46 ` [PATCH v3 18/21] docs: hwmon: pmbus files: " Mauro Carvalho Chehab
2019-04-17  9:46 ` [PATCH v3 19/21] docs: hwmon: misc " Mauro Carvalho Chehab
2019-04-17  9:46 ` [PATCH v3 21/21] docs: hwmon: Add an index file and rename docs to *.rst Mauro Carvalho Chehab
2019-04-17 11:31   ` Liviu Dudau
2019-04-17 16:47   ` Guenter Roeck
2019-04-17 16:54     ` Guenter Roeck
2019-04-17 17:13     ` Mauro Carvalho Chehab
2019-04-17 17:22       ` Mauro Carvalho Chehab
2019-04-17 17:43         ` Guenter Roeck
2019-04-17 17:47           ` Guenter Roeck
2019-04-18  9:44             ` Mauro Carvalho Chehab
2019-04-18 13:36               ` Guenter Roeck

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=722f0c2614ba19993fd04266063ad7c09876ff89.1555494108.git.mchehab+samsung@kernel.org \
    --to=mchehab+samsung@kernel.org \
    --cc=corbet@lwn.net \
    --cc=jdelvare@suse.com \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=mchehab@infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Hwmon Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-hwmon/0 linux-hwmon/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-hwmon linux-hwmon/ https://lore.kernel.org/linux-hwmon \
		linux-hwmon@vger.kernel.org linux-hwmon@archiver.kernel.org
	public-inbox-index linux-hwmon


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-hwmon


AGPL code for this site: git clone https://public-inbox.org/ public-inbox