Re: [PATCH v3 2/2] hwmon: (pmbus/tda38640) Add driver for Infineon TDA38640 Voltage Regulator

[Naresh Solanki <naresh.solanki@9elements.com>]

On 24-01-2023 08:39 pm, Krzysztof Kozlowski wrote:
> On 24/01/2023 15:48, Naresh Solanki wrote:
>> From: Patrick Rudolph <patrick.rudolph@9elements.com>
>>
>> Add the pmbus driver for the Infineon TDA38640 voltage regulator.
>>
>> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
>> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
>> ---
> 
> (...)
> 
>> +
>> +#include <linux/err.h>
>> +#include <linux/i2c.h>
>> +#include <linux/init.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/regulator/driver.h>
>> +#include "pmbus.h"
>> +
>> +static const struct regulator_desc __maybe_unused tda38640_reg_desc[] = {
>> +	PMBUS_REGULATOR("vout", 0),
>> +};
>> +
>> +static struct pmbus_driver_info tda38640_info = {
>> +	.pages = 1,
>> +	.format[PSC_VOLTAGE_IN] = linear,
>> +	.format[PSC_VOLTAGE_OUT] = linear,
>> +	.format[PSC_CURRENT_OUT] = linear,
>> +	.format[PSC_CURRENT_IN] = linear,
>> +	.format[PSC_POWER] = linear,
>> +	.format[PSC_TEMPERATURE] = linear,
>> +
>> +	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
>> +	    | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP
>> +	    | PMBUS_HAVE_IIN
>> +	    | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
>> +	    | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
>> +	    | PMBUS_HAVE_POUT | PMBUS_HAVE_PIN,
>> +#if IS_ENABLED(CONFIG_SENSORS_TDA38640_REGULATOR)
>> +	.num_regulators = 1,
>> +	.reg_desc = tda38640_reg_desc,
>> +#endif
>> +};
>> +
>> +static int tda38640_probe(struct i2c_client *client)
>> +{
>> +	return pmbus_do_probe(client, &tda38640_info);
>> +}
>> +
>> +static const struct i2c_device_id tda38640_id[] = {
>> +	{"tda38640", 0},
>> +	{}
>> +};
>> +MODULE_DEVICE_TABLE(i2c, tda38640_id);
>> +
>> +static const struct of_device_id __maybe_unused tda38640_of_match[] = {
>> +	{ .compatible = "infineon,tda38640"},
>> +	{ },
>> +};
>> +MODULE_DEVICE_TABLE(of, tda38640_of_match);
> 
> No improvements here. Do not send new version without solving the
> feedback (or finishing the discussion). Its usage is still missing in
> your i2c_driver.
I realized I missed reference to tda38640_of_match below.

static struct i2c_driver tda38640_driver = {
         .driver = {
                    .name = "tda38640",
                    .of_match_table = of_match_ptr(tda38640_of_match),
                    },
         .probe_new = tda38640_probe,
         .id_table = tda38640_id,
};

Will fix that.
> 
> Best regards,
> Krzysztof
> 
Thanks,
Naresh