Linux-Hwmon Archive on
 help / color / Atom feed
From: Chu Lin <>
To: Guenter Roeck <>
Cc:,,, Jason Ling <>,
	Kais Belgaied <>,
	Zhongqi Li <>
Subject: Re: [PATCH] hwmon:max6697: Allow max6581 to create tempX_offset attributes
Date: Thu, 2 Jul 2020 09:38:28 -0700
Message-ID: <> (raw)
In-Reply-To: <>

On Wed, Jul 1, 2020 at 10:14 PM Guenter Roeck <> wrote:
> On Thu, Jul 02, 2020 at 01:42:23AM +0000, Chu Lin wrote:
> > Per max6581, reg 4d and reg 4e is used for temperature read offset.
> > This patch will let the user specify the temperature read offset for
> > max6581. This patch is tested on max6581 and only applies to max6581.
> >
> Patchwork received four versions of this patch, with two different
> subject lines.
> How am I supposed to know which one to look at ?

Sorry for the confusion.
I was learning how to send amendments to a patch and forget that
it may create confusion for the reviewers. The latest one with headline
hwmon:max6697: Allow max6581 to create tempX_offset attributes is the one that
should be reviewed.


  reply index

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-30 17:43 [PATCH] hwmon:max6697: Allow max6581 to set temperature read offset Chu Lin
2020-06-30 17:59 ` Guenter Roeck
2020-07-01 18:43 ` Chu Lin
2020-07-01 18:45 ` Chu Lin
2020-07-02  1:42 ` [PATCH] hwmon:max6697: Allow max6581 to create tempX_offset attributes Chu Lin
2020-07-02  5:14   ` Guenter Roeck
2020-07-02 16:38     ` Chu Lin [this message]
2020-07-03  1:06   ` Guenter Roeck
2020-07-06 17:54     ` [PATCH] hwmon:max6697: Allow max6581 to create tempX_offset Chu Lin
2020-07-06 19:32       ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='' \ \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Hwmon Archive on

Archives are clonable:
	git clone --mirror linux-hwmon/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-hwmon linux-hwmon/ \
	public-inbox-index linux-hwmon

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone