From: Holger Kiehl <Holger.Kiehl@dwd.de>
To: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org, linux-kernel@vger.kernel.org,
"Clemens Ladisch" <clemens@ladisch.de>,
"Jean Delvare" <jdelvare@suse.com>,
"Brad Campbell" <lists2009@fnarfbargle.com>,
"Ondrej Čerman" <ocerman@sda1.eu>,
"Bernhard Gebetsberger" <bernhard.gebetsberger@gmx.at>,
"Michael Larabel" <michael@phoronix.com>,
"Jonathan McDowell" <noodles@earth.li>,
"Ken Moffat" <zarniwhoop73@googlemail.com>,
"Sebastian Reichel" <sebastian.reichel@collabora.com>,
"Darren Salt" <devspam@moreofthesa.me.uk>
Subject: Re: [PATCH v4 0/6] hwmon: k10temp driver improvements
Date: Sat, 25 Jan 2020 17:40:24 +0000 (UTC) [thread overview]
Message-ID: <alpine.LRH.2.21.2001251735570.13252@diagnostix.dwd.de> (raw)
In-Reply-To: <20200122160800.12560-1-linux@roeck-us.net>
[-- Attachment #1: Type: text/plain, Size: 27728 bytes --]
On Wed, 22 Jan 2020, Guenter Roeck wrote:
> This patch series implements various improvements for the k10temp driver.
>
> Patch 1/6 introduces the use of bit operations.
>
> Patch 2/6 converts the driver to use the devm_hwmon_device_register_with_info
> API. This not only simplifies the code and reduces its size, it also
> makes the code easier to maintain and enhance.
>
> Patch 3/6 adds support for reporting Core Complex Die (CCD) temperatures
> on Zen2 (Ryzen and Threadripper) CPUs (note that reporting is incomplete
> for Threadripper CPUs - it is known that additional temperature sensors
> exist, but the register locations are unknown).
>
> Patch 4/6 adds support for reporting core and SoC current and voltage
> information on Ryzen CPUs (note: voltage and current measurements for
> Threadripper and EPYC CPUs are known to exist, but register locations
> are unknown, and values are therefore not reported at this time).
>
> Patch 5/6 removes the maximum temperature from Tdie for Ryzen CPUs.
> It is inaccurate, misleading, and it just doesn't make sense to report
> wrong information.
>
> Patch 6/6 adds debugfs files to provide raw thermal and SVI register
> dumps. This may help in the future to identify additional sensors and/or
> to fix problems.
>
> With all patches in place, output on Ryzen 3900X CPUs looks as follows
> (with the system under load).
>
> k10temp-pci-00c3
> Adapter: PCI adapter
> Vcore: +1.39 V
> Vsoc: +1.18 V
> Tdie: +79.9°C
> Tctl: +79.9°C
> Tccd1: +61.8°C
> Tccd2: +76.5°C
> Icore: +46.00 A
> Isoc: +12.00 A
>
> The voltage and current information is limited to Ryzen CPUs. Voltage
> and current reporting on Threadripper and EPYC CPUs is different, and the
> reported information is either incomplete or wrong. Exclude it for the time
> being; it can always be added if/when more information becomes available.
>
> Tested with the following Ryzen CPUs:
> 1300X A user with this CPU in the system reported somewhat unexpected
> values for Vcore; it isn't entirely if at all clear why that is
> the case. Overall this does not warrant holding up the series.
> 1600
> 1800X
> 2200G
> 2400G
> 2700
> 2700X
> 2950X
> 3600X
> 3800X
> 3900X
> 3950X
> 3970X
> EPYC 7302
> EPYC 7742
>
Below some more testing on two Deskmini A300. One with a 2400G and
the other 3400G. Both have the same bios and board.
Regards,
Holger
Deskmini A300 Ryzen 5 2400G
Idle:
=====
cat /sys/kernel/debug/k10temp-0000\:00\:18.3/thm
0x059800: 2c800fef 00ff1001 00002921 000f4240
0x059810: 800000f9 00000000 00000000 00000000
0x059820: 00000000 00000000 00000000 0fff0078
0x059830: 00000000 002ead28 002ead28 002e6d26
0x059840: 002e8d27 002ded23 002e8d27 002f0d2b
0x059850: 002d6d1f 002dcd22 002dcd22 002ecd29
0x059860: 002d6d1f 002e8d27 002ded23 002e4d25
0x059870: 002e6d26 002e4d25 002e4d25 002ead28
0x059880: 002e0d24 002ead28 002d4d1e 002d8d20
0x059890: 002dcd22 002e6d26 002e6d26 002d8d20
0x0598a0: 002dcd22 002dcd22 002ded23 002d4d1e
0x0598b0: 002e4d25 00000000 00002100 ffffffff
0x0598c0: 00000000 00000000 00000000 00000000
0x0598d0: 00000000 00000000 00000000 00000000
0x0598e0: 00000000 00000000 00000000 00000000
0x0598f0: 00000000 00000000 00000000 00000000
0x059900: 00000000 00000000 00000000 00000000
0x059910: 00000000 00000000 00000000 00000000
0x059920: 00000000 00000000 00000000 00000000
0x059930: 00000000 00000000 00000000 00000000
0x059940: 00000000 00000000 00000000 00000000
0x059950: 00000000 00000000 00000000 00000000
0x059960: 00000000 08400001 0000582c 0000004e
0x059970: c0800005 30c8680e 00024068 00000000
0x059980: 00000000 00000000 00000000 00000000
0x059990: 00000000 00000000 00000000 00000000
0x0599a0: 00000000 00000000 00000000 00000000
0x0599b0: 00000000 00000000 00000000 00000000
0x0599c0: 00000060 000002f0 00000006 000002d4
0x0599d0: 00000015 00000000 00000000 000002f0
0x0599e0: 00000006 00000000 00000000 00000001
0x0599f0: 00000000 00010003 00000000 00000000
0x059a00: 00000000 00000000 00000000 00000000
0x059a10: 0000000e 00000000 00000003 00000000
0x059a20: 001f001a 00050003 00000000 00000000
0x059a30: 00df0010 00000000 00000000 00000000
0x059a40: 00000000 00000000 00000007 000000fe
0x059a50: 00000000 00000000 00000000 00000000
0x059a60: 00000000 00130082 0000063f 12110201
0x059a70: 0003005a 00001303 00000000 028a4f5c
0x059a80: 08036927 0021e548 00000000 7fffffff
0x059a90: 00000000 00000043 c00001c0 000000f9
0x059aa0: 00000000 00000000 00000000 00000000
0x059ab0: 00000000 00000000 00000000 00000000
0x059ac0: 00000000 00000000 00000000 00000000
0x059ad0: 00000000 00000000 00000000 00000000
0x059ae0: 00000000 00000000 00000000 00000000
0x059af0: 00000000 00000000 00000000 00000000
0x059b00: 00000000 00000000 00000000 00000000
0x059b10: 00000000 00000000 00000000 00000000
0x059b20: 00000000 00000000 00000000 00000000
0x059b30: 00000000 00000000 00000000 00000000
0x059b40: 00000000 00000000 00000000 00000000
0x059b50: 00000000 00000000 00000000 00000000
0x059b60: 00000000 00000000 00000000 00000000
0x059b70: 00000000 00000000 00000000 00000000
0x059b80: 00000000 00000000 00000000 00000000
0x059b90: 00000000 00000000 00000000 00000000
0x059ba0: 00000000 00000000 00000000 00000000
0x059bb0: 00000000 00000000 00000000 00000000
0x059bc0: 00000000 00000000 00000000 00000000
0x059bd0: 00000000 00000000 00000000 00000000
0x059be0: 00000000 00000000 00000000 00000000
0x059bf0: 00000000 00000000 00000000 00000000
cat /sys/kernel/debug/k10temp-0000\:00\:18.3/svi
0x05a000: 0000000e 0000002e 00000002 017d0013
0x05a010: 01490011 00000000 0000000e 00000000
0x05a020: 00000000 80000000 00000000 007a0000
0x05a030: 00000000 00000000 00000021 00000000
0x05a040: 00000000 00000000 00000000 7a000000
0x05a050: 68000000 48000000 00000000 0000030a
0x05a060: 00000007 00000000 80000002 80000002
0x05a070: 80000041 00000001 00000008 00000000
k10temp-pci-00c3
Adapter: PCI adapter
Vcore: +0.77 V
Vsoc: +1.09 V
Tdie: +44.5°C
Tctl: +44.5°C
Icore: +21.00 A
Isoc: +4.00 A
nvme-pci-0100
Adapter: PCI adapter
Composite: +41.9°C (low = -273.1°C, high = +80.8°C)
(crit = +80.8°C)
Sensor 1: +41.9°C (low = -273.1°C, high = +65261.8°C)
Sensor 2: +44.9°C (low = -273.1°C, high = +65261.8°C)
nct6793-isa-0290
Adapter: ISA adapter
in0: +0.42 V (min = +0.00 V, max = +1.74 V)
in1: +1.85 V (min = +0.00 V, max = +0.00 V) ALARM
in2: +3.41 V (min = +0.00 V, max = +0.00 V) ALARM
in3: +3.41 V (min = +0.00 V, max = +0.00 V) ALARM
in4: +0.26 V (min = +0.00 V, max = +0.00 V) ALARM
in5: +0.14 V (min = +0.00 V, max = +0.00 V) ALARM
in6: +0.67 V (min = +0.00 V, max = +0.00 V) ALARM
in7: +3.39 V (min = +0.00 V, max = +0.00 V) ALARM
in8: +3.26 V (min = +0.00 V, max = +0.00 V) ALARM
in9: +1.84 V (min = +0.00 V, max = +0.00 V) ALARM
in10: +0.19 V (min = +0.00 V, max = +0.00 V) ALARM
in11: +0.14 V (min = +0.00 V, max = +0.00 V) ALARM
in12: +1.85 V (min = +0.00 V, max = +0.00 V) ALARM
in13: +1.72 V (min = +0.00 V, max = +0.00 V) ALARM
in14: +0.20 V (min = +0.00 V, max = +0.00 V) ALARM
fan1: 0 RPM (min = 0 RPM)
fan2: 320 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
fan5: 0 RPM (min = 0 RPM)
SYSTIN: +113.0°C (high = +0.0°C, hyst = +0.0°C) sensor = thermistor
CPUTIN: +59.5°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
AUXTIN0: +45.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = thermistor
AUXTIN1: +106.0°C sensor = thermistor
AUXTIN2: +105.0°C sensor = thermistor
AUXTIN3: +102.0°C sensor = thermistor
SMBUSMASTER 0: +44.5°C
PCH_CHIP_CPU_MAX_TEMP: +0.0°C
PCH_CHIP_TEMP: +0.0°C
PCH_CPU_TEMP: +0.0°C
intrusion0: OK
intrusion1: ALARM
beep_enable: disabled
amdgpu-pci-0300
Adapter: PCI adapter
vddgfx: N/A
vddnb: N/A
edge: +44.0°C (crit = +80.0°C, hyst = +0.0°C)
Load:
=====
cat /sys/kernel/debug/k10temp-0000\:00\:18.3/thm
0x059800: 4b400fef 00ff1001 00002921 000f4240
0x059810: 800000f9 00000000 00000000 00000000
0x059820: 00000000 00000000 00000000 0fff0078
0x059830: 00000000 0034ad58 00308d37 0031ed42
0x059840: 0035ed62 00350d5b 00344d55 00378d6f
0x059850: 00308d37 0030cd39 00328d47 0031cd41
0x059860: 0030ad38 00318d3f 002fcd31 0030cd39
0x059870: 00312d3c 00322d44 00376d6e 00376d6e
0x059880: 00322d44 00378d6f 00324d45 00342d54
0x059890: 0037ad70 00336d4e 00350d5b 003dcda1
0x0598a0: 003dcda1 003acd89 003e2da4 00366d66
0x0598b0: 0035cd61 00000000 00002100 ffffffff
0x0598c0: 00000000 00000000 00000000 00000000
0x0598d0: 00000000 00000000 00000000 00000000
0x0598e0: 00000000 00000000 00000000 00000000
0x0598f0: 00000000 00000000 00000000 00000000
0x059900: 00000000 00000000 00000000 00000000
0x059910: 00000000 00000000 00000000 00000000
0x059920: 00000000 00000000 00000000 00000000
0x059930: 00000000 00000000 00000000 00000000
0x059940: 00000000 00000000 00000000 00000000
0x059950: 00000000 00000000 00000000 00000000
0x059960: 00000000 08400001 0000944a 0000004f
0x059970: c0800005 30c8680e 00024068 00000000
0x059980: 00000000 00000000 00000000 00000000
0x059990: 00000000 00000000 00000000 00000000
0x0599a0: 00000000 00000000 00000000 00000000
0x0599b0: 00000000 00000000 00000000 00000000
0x0599c0: 00000060 000003e2 0000001d 000002fc
0x0599d0: 0000000d 00000000 00000000 000003e2
0x0599e0: 0000001d 00000000 00000000 00000001
0x0599f0: 00000000 00010003 00000000 00000000
0x059a00: 00000000 00000000 00000000 00000000
0x059a10: 0000000e 00000000 00000003 00000000
0x059a20: 001f001a 00050003 00000000 00000000
0x059a30: 00df0001 00000000 00000000 00000000
0x059a40: 00000000 00000000 00000007 000000fe
0x059a50: 00000000 00000000 00000000 00000000
0x059a60: 00000000 00130082 0000063f 12110201
0x059a70: 0003005a 00001303 00000000 028a4f5c
0x059a80: 08036927 0021e548 00000000 7fffffff
0x059a90: 00000000 00000043 c00001c0 000000f9
0x059aa0: 00000000 00000000 00000000 00000000
0x059ab0: 00000000 00000000 00000000 00000000
0x059ac0: 00000000 00000000 00000000 00000000
0x059ad0: 00000000 00000000 00000000 00000000
0x059ae0: 00000000 00000000 00000000 00000000
0x059af0: 00000000 00000000 00000000 00000000
0x059b00: 00000000 00000000 00000000 00000000
0x059b10: 00000000 00000000 00000000 00000000
0x059b20: 00000000 00000000 00000000 00000000
0x059b30: 00000000 00000000 00000000 00000000
0x059b40: 00000000 00000000 00000000 00000000
0x059b50: 00000000 00000000 00000000 00000000
0x059b60: 00000000 00000000 00000000 00000000
0x059b70: 00000000 00000000 00000000 00000000
0x059b80: 00000000 00000000 00000000 00000000
0x059b90: 00000000 00000000 00000000 00000000
0x059ba0: 00000000 00000000 00000000 00000000
0x059bb0: 00000000 00000000 00000000 00000000
0x059bc0: 00000000 00000000 00000000 00000000
0x059bd0: 00000000 00000000 00000000 00000000
0x059be0: 00000000 00000000 00000000 00000000
0x059bf0: 00000000 00000000 00000000 00000000
cat /sys/kernel/debug/k10temp-0000\:00\:18.3/svi
0x05a000: 0000000e 0000002e 00000002 01220067
0x05a010: 01490013 00000000 0000000e 00000000
0x05a020: 00000000 00000000 00000000 00150000
0x05a030: 00000000 00000000 00000021 00000000
0x05a040: 00000000 00000000 00000000 15000000
0x05a050: 68000000 48000000 00000000 0000030a
0x05a060: 00000007 00000000 80000002 80000002
0x05a070: 80000041 00000001 00000008 00000000
k10temp-pci-00c3
Adapter: PCI adapter
Vcore: +1.32 V
Vsoc: +1.10 V
Tdie: +74.8°C
Tctl: +74.8°C
Icore: +99.00 A
Isoc: +5.00 A
nvme-pci-0100
Adapter: PCI adapter
Composite: +41.9°C (low = -273.1°C, high = +80.8°C)
(crit = +80.8°C)
Sensor 1: +41.9°C (low = -273.1°C, high = +65261.8°C)
Sensor 2: +44.9°C (low = -273.1°C, high = +65261.8°C)
nct6793-isa-0290
Adapter: ISA adapter
in0: +0.68 V (min = +0.00 V, max = +1.74 V)
in1: +1.85 V (min = +0.00 V, max = +0.00 V) ALARM
in2: +3.41 V (min = +0.00 V, max = +0.00 V) ALARM
in3: +3.39 V (min = +0.00 V, max = +0.00 V) ALARM
in4: +0.26 V (min = +0.00 V, max = +0.00 V) ALARM
in5: +0.14 V (min = +0.00 V, max = +0.00 V) ALARM
in6: +0.67 V (min = +0.00 V, max = +0.00 V) ALARM
in7: +3.39 V (min = +0.00 V, max = +0.00 V) ALARM
in8: +3.26 V (min = +0.00 V, max = +0.00 V) ALARM
in9: +1.84 V (min = +0.00 V, max = +0.00 V) ALARM
in10: +0.19 V (min = +0.00 V, max = +0.00 V) ALARM
in11: +0.14 V (min = +0.00 V, max = +0.00 V) ALARM
in12: +1.85 V (min = +0.00 V, max = +0.00 V) ALARM
in13: +1.72 V (min = +0.00 V, max = +0.00 V) ALARM
in14: +0.20 V (min = +0.00 V, max = +0.00 V) ALARM
fan1: 0 RPM (min = 0 RPM)
fan2: 1934 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
fan5: 0 RPM (min = 0 RPM)
SYSTIN: +113.0°C (high = +0.0°C, hyst = +0.0°C) sensor = thermistor
CPUTIN: +63.5°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
AUXTIN0: +45.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = thermistor
AUXTIN1: +106.0°C sensor = thermistor
AUXTIN2: +105.0°C sensor = thermistor
AUXTIN3: +103.0°C sensor = thermistor
SMBUSMASTER 0: +74.5°C
PCH_CHIP_CPU_MAX_TEMP: +0.0°C
PCH_CHIP_TEMP: +0.0°C
PCH_CPU_TEMP: +0.0°C
intrusion0: OK
intrusion1: ALARM
beep_enable: disabled
amdgpu-pci-0300
Adapter: PCI adapter
vddgfx: N/A
vddnb: N/A
edge: +74.0°C (crit = +80.0°C, hyst = +0.0°C)
-------------------------------------------------------------------------------
Deskmini A300 Ryzen 5 3400G
Idle:
=====
cat /sys/kernel/debug/k10temp-0000\:00\:18.3/thm
0x059800: 25800fef 00ff1001 00002921 000f4240
0x059810: 800000f9 00000000 00000000 00000000
0x059820: 00000000 00000000 00000000 0fff0078
0x059830: 00000000 002aed0d 002aad0b 002a4d08
0x059840: 002a6d09 002acd0c 002a6d09 002aad0b
0x059850: 002a6d09 002a6d09 002a6d09 002a8d0a
0x059860: 002aad0b 002a8d0a 002a4d08 002a2d07
0x059870: 002a8d0a 002a6d09 002ac000 002b2000
0x059880: 002ac000 002a6000 002ac000 002ac000
0x059890: 002b0000 002aa000 002ac000 002aa000
0x0598a0: 002a8000 002a6000 002a2000 002a6000
0x0598b0: 002a4000 00000000 00002100 ffffffff
0x0598c0: 00000000 00000000 00000000 00000000
0x0598d0: 00000000 00000000 00000000 00000000
0x0598e0: 00000000 00000000 00000000 00000000
0x0598f0: 00000000 00000000 00000000 00000000
0x059900: 00000000 00000000 00000000 00000000
0x059910: 00000000 00000000 00000000 00000000
0x059920: 00000000 00000000 00000000 00000000
0x059930: 00000000 00000000 00000000 00000000
0x059940: 00000000 00000000 00000000 00000000
0x059950: 00000000 00000000 00000000 00000000
0x059960: 00000000 08400001 00004a25 00000047
0x059970: c0800005 30c8680e 00024068 00000000
0x059980: 00000000 00000000 00000000 00000000
0x059990: 00000000 00000000 00000000 00000000
0x0599a0: 00000000 00000000 00000000 00000000
0x0599b0: 00000000 00000000 00000000 00000000
0x0599c0: 00000060 000002b4 00000012 0000029c
0x0599d0: 00000007 00000000 00000000 000002b4
0x0599e0: 00000012 00000000 00000000 00000001
0x0599f0: 00000000 00010003 00000000 00000000
0x059a00: 00000000 00000000 00000000 00000000
0x059a10: 0000000e 00000000 00000003 00000000
0x059a20: 001f001a 00050003 00000000 00000000
0x059a30: 000b0010 00000000 00000000 00000000
0x059a40: 00000000 00000000 00000007 000000fe
0x059a50: 00000000 00000000 00000000 00000000
0x059a60: 00000000 00130082 0000063f 12110201
0x059a70: 0003005a 00001303 00000000 028a4f5c
0x059a80: 08036927 0021e548 00000000 7fffffff
0x059a90: 00000000 00000043 c00001c0 800000f9
0x059aa0: 00000000 00000000 00000000 00000000
0x059ab0: 00000000 00000000 00000000 00000000
0x059ac0: 00000000 00000000 00000000 00000000
0x059ad0: 00000000 00000000 00000000 00000000
0x059ae0: 00000000 00000000 00000000 00000000
0x059af0: 00000000 00000000 00000000 00000000
0x059b00: 00000000 00000000 00000000 00000000
0x059b10: 00000000 00000000 00000000 00000000
0x059b20: 00000000 00000000 00000000 00000000
0x059b30: 00000000 00000000 00000000 00000000
0x059b40: 00000000 00000000 00000000 00000000
0x059b50: 00000000 00000000 00000000 00000000
0x059b60: 00000000 00000000 00000000 00000000
0x059b70: 00000000 00000000 00000000 00000000
0x059b80: 00000000 00000000 00000000 00000000
0x059b90: 00000000 00000000 00000000 00000000
0x059ba0: 00000000 00000000 00000000 00000000
0x059bb0: 00000000 00000000 00000000 00000000
0x059bc0: 00000000 00000000 00000000 00000000
0x059bd0: 00000000 00000000 00000000 00000000
0x059be0: 00000000 00000000 00000000 00000000
0x059bf0: 00000000 00000000 00000000 00000000
cat /sys/kernel/debug/k10temp-0000\:00\:18.3/svi
0x05a000: 0000000e 0000002e 00000002 018b0013
0x05a010: 017d000e 00000000 0000000e 00000000
0x05a020: 00000000 80000000 00000000 00890000
0x05a030: 00000000 00000000 00000021 00000000
0x05a040: 00000000 00000000 00000000 89000000
0x05a050: 68000000 7c000000 00000000 0000030a
0x05a060: 00000007 00000000 80000002 80000002
0x05a070: 80000041 00000001 00000008 00000000
nct6793-isa-0290
Adapter: ISA adapter
in0: +2.04 V (min = +0.00 V, max = +1.74 V) ALARM
in1: +1.85 V (min = +0.00 V, max = +0.00 V) ALARM
in2: +3.39 V (min = +0.00 V, max = +0.00 V) ALARM
in3: +3.39 V (min = +0.00 V, max = +0.00 V) ALARM
in4: +0.26 V (min = +0.00 V, max = +0.00 V) ALARM
in5: +0.14 V (min = +0.00 V, max = +0.00 V) ALARM
in6: +0.75 V (min = +0.00 V, max = +0.00 V) ALARM
in7: +3.39 V (min = +0.00 V, max = +0.00 V) ALARM
in8: +3.26 V (min = +0.00 V, max = +0.00 V) ALARM
in9: +1.85 V (min = +0.00 V, max = +0.00 V) ALARM
in10: +0.18 V (min = +0.00 V, max = +0.00 V) ALARM
in11: +0.14 V (min = +0.00 V, max = +0.00 V) ALARM
in12: +1.85 V (min = +0.00 V, max = +0.00 V) ALARM
in13: +1.71 V (min = +0.00 V, max = +0.00 V) ALARM
in14: +0.19 V (min = +0.00 V, max = +0.00 V) ALARM
fan1: 0 RPM (min = 0 RPM)
fan2: 316 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
fan5: 0 RPM (min = 0 RPM)
SYSTIN: +115.0°C (high = +0.0°C, hyst = +0.0°C) sensor = thermistor
CPUTIN: +46.5°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
AUXTIN0: +40.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = thermistor
AUXTIN1: +108.0°C sensor = thermistor
AUXTIN2: +107.0°C sensor = thermistor
AUXTIN3: +106.0°C sensor = thermistor
SMBUSMASTER 0: +42.5°C
PCH_CHIP_CPU_MAX_TEMP: +0.0°C
PCH_CHIP_TEMP: +0.0°C
PCH_CPU_TEMP: +0.0°C
intrusion0: OK
intrusion1: ALARM
beep_enable: disabled
amdgpu-pci-0400
Adapter: PCI adapter
vddgfx: N/A
vddnb: N/A
edge: +42.0°C (crit = +80.0°C, hyst = +0.0°C)
nvme-pci-0200
Adapter: PCI adapter
Composite: +35.9°C (low = -273.1°C, high = +80.8°C)
(crit = +80.8°C)
Sensor 1: +35.9°C (low = -273.1°C, high = +65261.8°C)
Sensor 2: +37.9°C (low = -273.1°C, high = +65261.8°C)
k10temp-pci-00c3
Adapter: PCI adapter
Vcore: +0.69 V
Vsoc: +0.78 V
Tdie: +42.1°C
Tctl: +42.1°C
Icore: +24.00 A
Isoc: +4.00 A
nvme-pci-0100
Adapter: PCI adapter
Composite: +36.9°C (low = -273.1°C, high = +80.8°C)
(crit = +80.8°C)
Sensor 1: +36.9°C (low = -273.1°C, high = +65261.8°C)
Sensor 2: +39.9°C (low = -273.1°C, high = +65261.8°C)
Load:
=====
cat /sys/kernel/debug/k10temp-0000\:00\:18.3/thm
0x059800: 46e00fef 00ff1001 00002921 000f4240
0x059810: 800000f9 00000000 00000000 00000000
0x059820: 00000000 00000000 00000000 0fff0078
0x059830: 00000000 0033ad52 0030cd3b 00312d3e
0x059840: 00350d5d 00346d58 0033ad52 0035cd63
0x059850: 002f6d30 00300d35 00322d46 0030ed3c
0x059860: 00300d35 0031ed44 002f8d31 00302d36
0x059870: 00300d35 0031cd43 0035cd63 00366d68
0x059880: 00320d45 00360d65 00320d45 00336d50
0x059890: 00364d67 00328d49 00342d56 003b2d8e
0x0598a0: 003c0d95 003aad8a 003aed8c 0035ad62
0x0598b0: 00350d5d 00000000 00002100 ffffffff
0x0598c0: 00000000 00000000 00000000 00000000
0x0598d0: 00000000 00000000 00000000 00000000
0x0598e0: 00000000 00000000 00000000 00000000
0x0598f0: 00000000 00000000 00000000 00000000
0x059900: 00000000 00000000 00000000 00000000
0x059910: 00000000 00000000 00000000 00000000
0x059920: 00000000 00000000 00000000 00000000
0x059930: 00000000 00000000 00000000 00000000
0x059940: 00000000 00000000 00000000 00000000
0x059950: 00000000 00000000 00000000 00000000
0x059960: 00000000 08400001 00008e47 00000049
0x059970: c0800005 30c8680e 00024068 00000000
0x059980: 00000000 00000000 00000000 00000000
0x059990: 00000000 00000000 00000000 00000000
0x0599a0: 00000000 00000000 00000000 00000000
0x0599b0: 00000000 00000000 00000000 00000000
0x0599c0: 00000060 000003c0 0000001b 000002f6
0x0599d0: 00000007 00000000 00000000 000003c0
0x0599e0: 0000001b 00000000 00000000 00000001
0x0599f0: 00000000 00010003 00000000 00000000
0x059a00: 00000000 00000000 00000000 00000000
0x059a10: 0000000e 00000000 00000003 00000000
0x059a20: 001f001a 00050003 00000000 00000000
0x059a30: 000b0010 00000000 00000000 00000000
0x059a40: 00000000 00000000 00000007 000000fe
0x059a50: 00000000 00000000 00000000 00000000
0x059a60: 00000000 00130082 0000063f 12110201
0x059a70: 0003005a 00001303 00000000 028a4f5c
0x059a80: 08036927 0021e548 00000000 7fffffff
0x059a90: 00000000 00000043 c00001c0 000000f9
0x059aa0: 00000000 00000000 00000000 00000000
0x059ab0: 00000000 00000000 00000000 00000000
0x059ac0: 00000000 00000000 00000000 00000000
0x059ad0: 00000000 00000000 00000000 00000000
0x059ae0: 00000000 00000000 00000000 00000000
0x059af0: 00000000 00000000 00000000 00000000
0x059b00: 00000000 00000000 00000000 00000000
0x059b10: 00000000 00000000 00000000 00000000
0x059b20: 00000000 00000000 00000000 00000000
0x059b30: 00000000 00000000 00000000 00000000
0x059b40: 00000000 00000000 00000000 00000000
0x059b50: 00000000 00000000 00000000 00000000
0x059b60: 00000000 00000000 00000000 00000000
0x059b70: 00000000 00000000 00000000 00000000
0x059b80: 00000000 00000000 00000000 00000000
0x059b90: 00000000 00000000 00000000 00000000
0x059ba0: 00000000 00000000 00000000 00000000
0x059bb0: 00000000 00000000 00000000 00000000
0x059bc0: 00000000 00000000 00000000 00000000
0x059bd0: 00000000 00000000 00000000 00000000
0x059be0: 00000000 00000000 00000000 00000000
0x059bf0: 00000000 00000000 00000000 00000000
cat /sys/kernel/debug/k10temp-0000\:00\:18.3/svi
0x05a000: 0000000e 0000002e 00000002 012e0078
0x05a010: 01490019 00000000 0000000e 00000000
0x05a020: 00000000 00000000 00000000 00210000
0x05a030: 00000000 00000000 00000021 00000000
0x05a040: 00000000 00000000 00000000 21000000
0x05a050: 68000000 48000000 00000000 0000030a
0x05a060: 00000007 00000000 00000002 80000002
0x05a070: 80000041 00000001 00000008 00000000
nct6793-isa-0290
Adapter: ISA adapter
in0: +0.66 V (min = +0.00 V, max = +1.74 V)
in1: +1.85 V (min = +0.00 V, max = +0.00 V) ALARM
in2: +3.41 V (min = +0.00 V, max = +0.00 V) ALARM
in3: +3.39 V (min = +0.00 V, max = +0.00 V) ALARM
in4: +0.25 V (min = +0.00 V, max = +0.00 V) ALARM
in5: +0.14 V (min = +0.00 V, max = +0.00 V) ALARM
in6: +0.75 V (min = +0.00 V, max = +0.00 V) ALARM
in7: +3.39 V (min = +0.00 V, max = +0.00 V) ALARM
in8: +3.26 V (min = +0.00 V, max = +0.00 V) ALARM
in9: +1.85 V (min = +0.00 V, max = +0.00 V) ALARM
in10: +0.18 V (min = +0.00 V, max = +0.00 V) ALARM
in11: +0.14 V (min = +0.00 V, max = +0.00 V) ALARM
in12: +1.85 V (min = +0.00 V, max = +0.00 V) ALARM
in13: +1.72 V (min = +0.00 V, max = +0.00 V) ALARM
in14: +0.19 V (min = +0.00 V, max = +0.00 V) ALARM
fan1: 0 RPM (min = 0 RPM)
fan2: 1797 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
fan5: 0 RPM (min = 0 RPM)
SYSTIN: +115.0°C (high = +0.0°C, hyst = +0.0°C) sensor = thermistor
CPUTIN: +57.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
AUXTIN0: +39.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = thermistor
AUXTIN1: +108.0°C sensor = thermistor
AUXTIN2: +107.0°C sensor = thermistor
AUXTIN3: +106.0°C sensor = thermistor
SMBUSMASTER 0: +71.0°C
PCH_CHIP_CPU_MAX_TEMP: +0.0°C
PCH_CHIP_TEMP: +0.0°C
PCH_CPU_TEMP: +0.0°C
intrusion0: OK
intrusion1: ALARM
beep_enable: disabled
amdgpu-pci-0400
Adapter: PCI adapter
vddgfx: N/A
vddnb: N/A
edge: +71.0°C (crit = +80.0°C, hyst = +0.0°C)
nvme-pci-0200
Adapter: PCI adapter
Composite: +35.9°C (low = -273.1°C, high = +80.8°C)
(crit = +80.8°C)
Sensor 1: +35.9°C (low = -273.1°C, high = +65261.8°C)
Sensor 2: +37.9°C (low = -273.1°C, high = +65261.8°C)
k10temp-pci-00c3
Adapter: PCI adapter
Vcore: +1.26 V
Vsoc: +1.09 V
Tdie: +71.0°C
Tctl: +71.0°C
Icore: +119.00 A
Isoc: +6.50 A
nvme-pci-0100
Adapter: PCI adapter
Composite: +36.9°C (low = -273.1°C, high = +80.8°C)
(crit = +80.8°C)
Sensor 1: +36.9°C (low = -273.1°C, high = +65261.8°C)
Sensor 2: +39.9°C (low = -273.1°C, high = +65261.8°C)
prev parent reply other threads:[~2020-01-25 17:40 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-22 16:07 [PATCH v4 0/6] hwmon: k10temp driver improvements Guenter Roeck
2020-01-22 16:07 ` [PATCH v4 1/6] hwmon: (k10temp) Use bitops Guenter Roeck
2020-01-22 16:07 ` [PATCH v4 2/6] hmon: (k10temp) Convert to use devm_hwmon_device_register_with_info Guenter Roeck
2020-01-22 16:07 ` [PATCH v4 3/6] hwmon: (k10temp) Report temperatures per CPU die Guenter Roeck
2020-01-22 16:07 ` [PATCH v4 4/6] hwmon: (k10temp) Show core and SoC current and voltages on Ryzen CPUs Guenter Roeck
2020-01-22 16:07 ` [PATCH v4 5/6] hwmon: (k10temp) Don't show temperature limits on Ryzen (Zen) CPUs Guenter Roeck
2020-01-22 16:08 ` [PATCH v4 6/6] hwmon: (k10temp) Add debugfs support Guenter Roeck
2020-01-24 0:01 ` Ken Moffat
2020-01-24 4:47 ` Guenter Roeck
2020-01-22 19:05 ` [PATCH v4 0/6] hwmon: k10temp driver improvements Sebastian Reichel
2020-01-22 19:37 ` Guenter Roeck
2020-01-25 17:40 ` Holger Kiehl [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.LRH.2.21.2001251735570.13252@diagnostix.dwd.de \
--to=holger.kiehl@dwd.de \
--cc=bernhard.gebetsberger@gmx.at \
--cc=clemens@ladisch.de \
--cc=devspam@moreofthesa.me.uk \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=lists2009@fnarfbargle.com \
--cc=michael@phoronix.com \
--cc=noodles@earth.li \
--cc=ocerman@sda1.eu \
--cc=sebastian.reichel@collabora.com \
--cc=zarniwhoop73@googlemail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).