From: Chris Packham <Chris.Packham@alliedtelesis.co.nz>
To: Guenter Roeck <linux@roeck-us.net>
Cc: "jdelvare@suse.com" <jdelvare@suse.com>,
"linux-hwmon@vger.kernel.org" <linux-hwmon@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 2/2] hwmon: (pmbus/bpa-rs600) Add workaround for incorrect Pin max
Date: Wed, 11 Aug 2021 22:19:44 +0000 [thread overview]
Message-ID: <b02c3a4d-4d91-0506-7833-6266efc0a2fc@alliedtelesis.co.nz> (raw)
In-Reply-To: <20210811195327.GA966160@roeck-us.net>
On 12/08/21 7:53 am, Guenter Roeck wrote:
> On Wed, Aug 11, 2021 at 04:17:38PM +1200, Chris Packham wrote:
>> BPD-RS600 modules running firmware v5.70 misreport the MFR_PIN_MAX.
>> The indicate a maximum of 1640W instead of 700W. Detect the invalid
>> reading and return a sensible value instead.
>>
>> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
>> ---
>> drivers/hwmon/pmbus/bpa-rs600.c | 21 ++++++++++++++++++++-
>> 1 file changed, 20 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/hwmon/pmbus/bpa-rs600.c b/drivers/hwmon/pmbus/bpa-rs600.c
>> index d495faa89799..f4baed9ce8a4 100644
>> --- a/drivers/hwmon/pmbus/bpa-rs600.c
>> +++ b/drivers/hwmon/pmbus/bpa-rs600.c
>> @@ -65,6 +65,24 @@ static int bpa_rs600_read_vin(struct i2c_client *client)
>> return ret;
>> }
>>
>> +/*
>> + * The firmware on some BPD-RS600 models incorrectly reports 1640W
>> + * for MFR_PIN_MAX. Deal with this by returning a sensible value.
>> + */
>> +static int bpa_rs600_read_pin_max(struct i2c_client *client)
>> +{
>> + int ret;
>> +
>> + ret = pmbus_read_word_data(client, 0, 0xff, PMBUS_MFR_PIN_MAX);
>> + if (ret < 0)
>> + return ret;
>> +
>> + if (ret == 0x0b34)
>> + return 0x095e;
> The comments from the descriotion need to be here.
will update
> Thanks,
> Guenter
>
>> +
>> + return ret;
>> +}
>> +
>> static int bpa_rs600_read_word_data(struct i2c_client *client, int page, int phase, int reg)
>> {
>> int ret;
>> @@ -92,7 +110,8 @@ static int bpa_rs600_read_word_data(struct i2c_client *client, int page, int pha
>> ret = pmbus_read_word_data(client, 0, 0xff, PMBUS_MFR_IOUT_MAX);
>> break;
>> case PMBUS_PIN_OP_WARN_LIMIT:
>> - ret = pmbus_read_word_data(client, 0, 0xff, PMBUS_MFR_PIN_MAX);
>> + case PMBUS_MFR_PIN_MAX:
>> + ret = bpa_rs600_read_pin_max(client);
> So the idea is to return the same value for PMBUS_PIN_OP_WARN_LIMIT
> (max_alarm) and PMBUS_MFR_PIN_MAX (rated_max) ? That doesn't really
> make sense. The meaning of those limits is distinctly different.
For the BPA-RS600/BPD-RS600 these appear to be treated the same.
>
> Guenter
>
>> break;
>> case PMBUS_POUT_OP_WARN_LIMIT:
>> ret = pmbus_read_word_data(client, 0, 0xff, PMBUS_MFR_POUT_MAX);
>> --
>> 2.32.0
>>
next prev parent reply other threads:[~2021-08-11 22:19 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-11 4:17 [PATCH 0/2] hwmon: (pmbus/bpa-rs600) cleanup and workaround Chris Packham
2021-08-11 4:17 ` [PATCH 1/2] hwmon: (pmbus/bpa-rs600) Remove duplicate defininitions Chris Packham
2021-08-11 19:53 ` Guenter Roeck
2021-08-11 21:58 ` Chris Packham
2021-08-11 4:17 ` [PATCH 2/2] hwmon: (pmbus/bpa-rs600) Add workaround for incorrect Pin max Chris Packham
2021-08-11 19:53 ` Guenter Roeck
2021-08-11 22:19 ` Chris Packham [this message]
2021-08-11 23:18 ` Guenter Roeck
2021-08-11 23:25 ` Chris Packham
2021-08-12 0:41 ` Guenter Roeck
2021-08-12 3:15 ` [PATCH 0/2] hwmon: (pmbus/bpa-rs600) cleanup and workaround Chris Packham
2021-08-12 4:29 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b02c3a4d-4d91-0506-7833-6266efc0a2fc@alliedtelesis.co.nz \
--to=chris.packham@alliedtelesis.co.nz \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).