Linux-Hwmon Archive on lore.kernel.org
 help / color / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: Beniamin Bia <beniamin.bia@analog.com>, linux-hwmon@vger.kernel.org
Cc: Michael.Hennerich@analog.com, linux-kernel@vger.kernel.org,
	jdelvare@suse.com, mark.rutland@arm.com, lgirdwood@gmail.com,
	broonie@kernel.org, devicetree@vger.kernel.org,
	biabeniamin@outlook.com
Subject: Re: [PATCH 2/3] dt-binding: iio: Add documentation for ADM1177
Date: Tue, 3 Dec 2019 07:06:54 -0800
Message-ID: <b7402a4f-1918-1922-a779-c9914be27f1b@roeck-us.net> (raw)
In-Reply-To: <20191203135711.13972-2-beniamin.bia@analog.com>

On 12/3/19 5:57 AM, Beniamin Bia wrote:
> Documentation for ADM1177 was added.
> 

Subject still points to iio.

> Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
> ---
>   .../bindings/hwmon/adi,adm1177.yaml           | 65 +++++++++++++++++++
>   1 file changed, 65 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
> 
> diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
> new file mode 100644
> index 000000000000..abd9354217ba
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
> @@ -0,0 +1,65 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/hwmon/adi,adm1177.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices ADM1177 Hot Swap Controller and Digital Power Monitor
> +
> +maintainers:
> +  - Michael Hennerich <michael.hennerich@analog.com>
> +  - Beniamin Bia <beniamin.bia@analog.com>
> +
> +description: |
> +  Analog Devices ADM1177 Hot Swap Controller and Digital Power Monitor
> +  https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1177.pdf
> +
> +properties:
> +  compatible:
> +    enum:
> +      - adi,adm1177
> +
> +  reg:
> +    maxItems: 1
> +
> +  avcc-supply:
> +    description:
> +      Phandle to the Avcc power supply
> +
> +  adi,r-sense-micro-ohms:
> +    description:
> +      The value of curent sense resistor in microohms.

There is a standard property for that (shunt-resistor-micro-ohms).

> +
> +  adi,shutdown-threshold-microamp:
> +    description:
> +      Specifies the current level at which an over current alert occurs.
> +
> +  adi,vrange-high-enable:
> +    description:
> +      Specifies which internal voltage divider to be used. A 1 selects
> +      a 7:2 voltage divider while a 0 selects a 14:1 voltage divider.
> +    type: boolean
> +
> +required:
> +  - compatible
> +  - reg
> +  - adi,r-sense-micro-ohms
> +  - adi,shutdown-threshold-microamp
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    i2c0 {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        pwmon@5a {
> +                compatible = "adi,adm1177";
> +                reg = <0x5a>;
> +                adi,r-sense-micro-ohms = <50000>; /* 50 mOhm */
> +                adi,shutdown-threshold-microamp = <1059000>; /* 1.059 A */
> +                adi,vrange-high-enable;
> +        };
> +    };
> +...
> 


  reply index

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-03 13:57 [PATCH 1/3] hwmon: adm1177: Add ADM1177 Hot Swap Controller and Digital Power Monitor driver Beniamin Bia
2019-12-03 13:57 ` [PATCH 2/3] dt-binding: iio: Add documentation for ADM1177 Beniamin Bia
2019-12-03 15:06   ` Guenter Roeck [this message]
2019-12-03 13:57 ` [PATCH 3/3] MAINTAINERS: add entry for ADM1177 driver Beniamin Bia
2019-12-03 19:28 ` [PATCH 1/3] hwmon: adm1177: Add ADM1177 Hot Swap Controller and Digital Power Monitor driver Guenter Roeck

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b7402a4f-1918-1922-a779-c9914be27f1b@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=Michael.Hennerich@analog.com \
    --cc=beniamin.bia@analog.com \
    --cc=biabeniamin@outlook.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jdelvare@suse.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Hwmon Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-hwmon/0 linux-hwmon/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-hwmon linux-hwmon/ https://lore.kernel.org/linux-hwmon \
		linux-hwmon@vger.kernel.org
	public-inbox-index linux-hwmon

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-hwmon


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git