From: Vincent Pelletier <plr.vincent@gmail.com>
To: Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>,
Jonathan Corbet <corbet@lwn.net>,
Support Opensource <support.opensource@diasemi.com>,
Lee Jones <lee.jones@linaro.org>,
linux-hwmon@vger.kernel.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org,
"Opensource [Steve Twiss]" <stwiss.opensource@diasemi.com>
Subject: [PATCH v3 1/3] mfd: da9063: Add HWMON dependencies
Date: Wed, 7 Jul 2021 13:25:02 +0000 [thread overview]
Message-ID: <c06db13bb5076a8ee48e38a74caf3b81e4a2d1f8.1625662290.git.plr.vincent@gmail.com> (raw)
From: "Opensource [Steve Twiss]" <stwiss.opensource@diasemi.com>
Dependencies required for DA9063 HWMON support.
Signed-off-by: Opensource [Steve Twiss] <stwiss.opensource@diasemi.com>
Moved temperature offset reading to hwmon driver.
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
---
Changes in v3:
- moved temperature offset reading to hwmon driver
Changes in v2:
- registers.h changes moved from patch 2
Originally submitted by Steve Twiss in 2014:
https://marc.info/?l=linux-kernel&m=139560864709852&w=2
include/linux/mfd/da9063/registers.h | 34 ++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/include/linux/mfd/da9063/registers.h b/include/linux/mfd/da9063/registers.h
index 6e0f66a2e727..297631ddda39 100644
--- a/include/linux/mfd/da9063/registers.h
+++ b/include/linux/mfd/da9063/registers.h
@@ -512,6 +512,7 @@
/* DA9063_REG_GPIO_0_1 (addr=0x15) */
#define DA9063_GPIO0_PIN_MASK 0x03
+#define DA9063_GPIO0_PIN_MASK_SHIFT 0
#define DA9063_GPIO0_PIN_ADCIN1 0x00
#define DA9063_GPIO0_PIN_GPI 0x01
#define DA9063_GPIO0_PIN_GPO_OD 0x02
@@ -523,6 +524,7 @@
#define DA9063_GPIO0_TYPE_GPO_VDD_IO2 0x04
#define DA9063_GPIO0_NO_WAKEUP 0x08
#define DA9063_GPIO1_PIN_MASK 0x30
+#define DA9063_GPIO1_PIN_MASK_SHIFT 4
#define DA9063_GPIO1_PIN_ADCIN2_COMP 0x00
#define DA9063_GPIO1_PIN_GPI 0x10
#define DA9063_GPIO1_PIN_GPO_OD 0x20
@@ -536,6 +538,7 @@
/* DA9063_REG_GPIO_2_3 (addr=0x16) */
#define DA9063_GPIO2_PIN_MASK 0x03
+#define DA9063_GPIO2_PIN_MASK_SHIFT 0
#define DA9063_GPIO2_PIN_ADCIN3 0x00
#define DA9063_GPIO2_PIN_GPI 0x01
#define DA9063_GPIO2_PIN_GPO_PSS 0x02
@@ -851,6 +854,7 @@
#define DA9063_VSYS_VAL_BASE 0x00
/* DA9063_REG_ADC_RES_L (addr=0x37) */
+#define DA9063_ADC_RES_L_SHIFT 6
#define DA9063_ADC_RES_L_BITS 2
#define DA9063_ADC_RES_L_MASK 0xC0
@@ -1014,6 +1018,36 @@
#define DA9063_GPIO_DIM 0x80
#define DA9063_GPIO_PWM_MASK 0x7F
+/* DA9063_REG_ADC_CFG (addr=0xC9) */
+#define DA9063_REG_ADCIN1_CUR_MASK 0x03
+#define DA9063_REG_ADCIN1_CUR_SHIFT 0
+#define DA9063_ADCIN1_CUR_1UA 0x00
+#define DA9063_ADCIN1_CUR_2UA 0x01
+#define DA9063_ADCIN1_CUR_10UA 0x02
+#define DA9063_ADCIN1_CUR_40UA 0x03
+#define DA9063_REG_ADCIN2_CUR_MASK 0x0C
+#define DA9063_REG_ADCIN2_CUR_SHIFT 2
+#define DA9063_ADCIN2_CUR_1UA 0x00
+#define DA9063_ADCIN2_CUR_2UA 0x01
+#define DA9063_ADCIN2_CUR_10UA 0x02
+#define DA9063_ADCIN2_CUR_40UA 0x03
+#define DA9063_REG_ADCIN3_CUR_MASK 0x10
+#define DA9063_REG_ADCIN3_CUR_SHIFT 4
+#define DA9063_ADCIN3_CUR_10UA 0x00
+#define DA9063_ADCIN3_CUR_40UA 0x01
+#define DA9063_REG_ADCIN1_DEB_MASK 0x20
+#define DA9063_REG_ADCIN1_DEB_SHIFT 5
+#define DA9063_ADCIN1_DEB_OFF 0x00
+#define DA9063_ADCIN1_DEB_ON 0x01
+#define DA9063_REG_ADCIN2_DEB_MASK 0x40
+#define DA9063_REG_ADCIN2_DEB_SHIFT 6
+#define DA9063_ADCIN2_DEB_OFF 0x00
+#define DA9063_ADCIN2_DEB_ON 0x01
+#define DA9063_REG_ADCIN3_DEB_MASK 0x80
+#define DA9063_REG_ADCIN3_DEB_SHIFT 7
+#define DA9063_ADCIN3_DEB_OFF 0x00
+#define DA9063_ADCIN3_DEB_ON 0x01
+
/* DA9063_REG_CONFIG_H (addr=0x10D) */
#define DA9063_PWM_CLK_MASK 0x01
#define DA9063_PWM_CLK_PWM2MHZ 0x00
--
2.32.0
next reply other threads:[~2021-07-07 13:29 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-07 13:25 Vincent Pelletier [this message]
2021-07-07 13:25 ` [PATCH v3 2/3] hwmon: da9063: HWMON driver Vincent Pelletier
2021-07-10 16:08 ` Guenter Roeck
2021-07-11 1:15 ` Vincent Pelletier
2021-07-11 2:55 ` Vincent Pelletier
2021-07-11 4:22 ` Guenter Roeck
2021-07-11 11:39 ` Vincent Pelletier
2021-07-11 15:14 ` Guenter Roeck
2021-07-11 4:44 ` Vincent Pelletier
2021-07-11 4:58 ` Randy Dunlap
2021-07-11 5:22 ` Vincent Pelletier
2021-07-11 5:45 ` Guenter Roeck
2021-07-07 13:25 ` [PATCH v3 3/3] Documentation: hwmon: New information for DA9063 Vincent Pelletier
2021-07-10 16:17 ` Guenter Roeck
2021-08-05 11:40 ` [PATCH v3 1/3] mfd: da9063: Add HWMON dependencies Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c06db13bb5076a8ee48e38a74caf3b81e4a2d1f8.1625662290.git.plr.vincent@gmail.com \
--to=plr.vincent@gmail.com \
--cc=corbet@lwn.net \
--cc=jdelvare@suse.com \
--cc=lee.jones@linaro.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=stwiss.opensource@diasemi.com \
--cc=support.opensource@diasemi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).