Thanks, Joel! JFYI, Alexander Soldatov has left the YADRO team some time ago, so his e-mail @yadro.com isn't valid anymore. Should anyone have any questions regarding this patch, feel free to email me. With best regards, Alexander Amelkin, Leading BMC Software Engineer, YADRO https://yadro.com 10.07.2019 10:26, Joel Stanley wrote: > From: Alexander Soldatov > > The occ driver supports two formats for the temp sensor value. > > The OCC firmware for P8 supports only the first format, for which > no range checking or error processing is performed in the driver. > Inspecting the OCC sources for P8 reveals that OCC may send > a special value 0xFFFF to indicate that a sensor read timeout > has occurred, see > > https://github.com/open-power/occ/blob/master_p8/src/occ/cmdh/cmdh_fsp_cmds.c#L395 > > That situation wasn't handled in the driver. This patch adds invalid > temp value check for the sensor data format 1 and handles it the same > way as it is done for the format 2, where EREMOTEIO is reported for > this case. > > Fixes: 54076cb3b5ff ("hwmon (occ): Add sensor attributes and register hwmon device") > Signed-off-by: Alexander Soldatov > Signed-off-by: Alexander Amelkin > Reviewed-by: Alexander Amelkin > Reviewed-by: Eddie James > Signed-off-by: Joel Stanley > --- > drivers/hwmon/occ/common.c | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/drivers/hwmon/occ/common.c b/drivers/hwmon/occ/common.c > index cccf91742c1a..a7d2b16dd702 100644 > --- a/drivers/hwmon/occ/common.c > +++ b/drivers/hwmon/occ/common.c > @@ -241,6 +241,12 @@ static ssize_t occ_show_temp_1(struct device *dev, > val = get_unaligned_be16(&temp->sensor_id); > break; > case 1: > + /* > + * If a sensor reading has expired and couldn't be refreshed, > + * OCC returns 0xFFFF for that sensor. > + */ > + if (temp->value == 0xFFFF) > + return -EREMOTEIO; > val = get_unaligned_be16(&temp->value) * 1000; > break; > default: