Linux-Hwmon Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 0/2] hwmon: scmi: Scale values to target desired HWMON units
@ 2019-05-06 22:41 Florian Fainelli
  2019-05-06 22:41 ` [PATCH 1/2] firmware: arm_scmi: Fetch and store sensor scale Florian Fainelli
  2019-05-06 22:41 ` [PATCH 2/2] hwmon: scmi: Scale values to target desired HWMON units Florian Fainelli
  0 siblings, 2 replies; 7+ messages in thread
From: Florian Fainelli @ 2019-05-06 22:41 UTC (permalink / raw)
  To: linux-kernel
  Cc: bcm-kernel-feedback-list, Florian Fainelli, Sudeep Holla,
	Jean Delvare, Guenter Roeck, linux-arm-kernel, linux-hwmon

Hi Sudeep, Guenter,

This patch series adds support for scaling SCMI sensor values read from
firmware. Sudeep, let me know if you think we should be treating scale
== 0 as a special value to preserve some firmware compatibility (not
that this would be desired).

Thanks!

Florian Fainelli (2):
  firmware: arm_scmi: Fetch and store sensor scale
  hwmon: scmi: Scale values to target desired HWMON units

 drivers/firmware/arm_scmi/sensors.c |  7 +++-
 drivers/hwmon/scmi-hwmon.c          | 55 ++++++++++++++++++++++++-----
 include/linux/scmi_protocol.h       |  1 +
 3 files changed, 53 insertions(+), 10 deletions(-)

-- 
2.17.1


^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, back to index

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-06 22:41 [PATCH 0/2] hwmon: scmi: Scale values to target desired HWMON units Florian Fainelli
2019-05-06 22:41 ` [PATCH 1/2] firmware: arm_scmi: Fetch and store sensor scale Florian Fainelli
2019-05-07 13:31   ` Guenter Roeck
2019-05-06 22:41 ` [PATCH 2/2] hwmon: scmi: Scale values to target desired HWMON units Florian Fainelli
2019-05-07 13:55   ` Guenter Roeck
2019-05-07 17:44     ` Florian Fainelli
2019-05-07 18:26       ` Guenter Roeck

Linux-Hwmon Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-hwmon/0 linux-hwmon/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-hwmon linux-hwmon/ https://lore.kernel.org/linux-hwmon \
		linux-hwmon@vger.kernel.org linux-hwmon@archiver.kernel.org
	public-inbox-index linux-hwmon


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-hwmon


AGPL code for this site: git clone https://public-inbox.org/ public-inbox