From: Haiyang Zhang <haiyangz@microsoft.com>
To: "sashal@kernel.org" <sashal@kernel.org>,
"davem@davemloft.net" <davem@davemloft.net>,
"saeedm@mellanox.com" <saeedm@mellanox.com>,
"leon@kernel.org" <leon@kernel.org>,
"eranbe@mellanox.com" <eranbe@mellanox.com>,
"lorenzo.pieralisi@arm.com" <lorenzo.pieralisi@arm.com>,
"bhelgaas@google.com" <bhelgaas@google.com>,
"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
"linux-hyperv@vger.kernel.org" <linux-hyperv@vger.kernel.org>,
"netdev@vger.kernel.org" <netdev@vger.kernel.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>,
KY Srinivasan <kys@microsoft.com>,
Stephen Hemminger <sthemmin@microsoft.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: [PATCH net-next,v5, 2/6] PCI: hv: Add a Hyper-V PCI interface driver for software backchannel interface
Date: Thu, 22 Aug 2019 22:26:30 +0000 [thread overview]
Message-ID: <1566512708-13785-3-git-send-email-haiyangz@microsoft.com> (raw)
In-Reply-To: <1566512708-13785-1-git-send-email-haiyangz@microsoft.com>
This interface driver is a helper driver allows other drivers to
have a common interface with the Hyper-V PCI frontend driver.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
MAINTAINERS | 1 +
drivers/pci/Kconfig | 1 +
drivers/pci/controller/Kconfig | 7 ++++
drivers/pci/controller/Makefile | 1 +
drivers/pci/controller/pci-hyperv-intf.c | 67 ++++++++++++++++++++++++++++++++
drivers/pci/controller/pci-hyperv.c | 12 ++++--
include/linux/hyperv.h | 30 ++++++++++----
7 files changed, 108 insertions(+), 11 deletions(-)
create mode 100644 drivers/pci/controller/pci-hyperv-intf.c
diff --git a/MAINTAINERS b/MAINTAINERS
index a406947..9860853 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7469,6 +7469,7 @@ F: drivers/hid/hid-hyperv.c
F: drivers/hv/
F: drivers/input/serio/hyperv-keyboard.c
F: drivers/pci/controller/pci-hyperv.c
+F: drivers/pci/controller/pci-hyperv-intf.c
F: drivers/net/hyperv/
F: drivers/scsi/storvsc_drv.c
F: drivers/uio/uio_hv_generic.c
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 2ab9240..c313de9 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -182,6 +182,7 @@ config PCI_LABEL
config PCI_HYPERV
tristate "Hyper-V PCI Frontend"
depends on X86 && HYPERV && PCI_MSI && PCI_MSI_IRQ_DOMAIN && X86_64
+ select PCI_HYPERV_INTERFACE
help
The PCI device frontend driver allows the kernel to import arbitrary
PCI devices from a PCI backend to support PCI driver domains.
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index fe9f9f1..70e0782 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -281,5 +281,12 @@ config VMD
To compile this driver as a module, choose M here: the
module will be called vmd.
+config PCI_HYPERV_INTERFACE
+ tristate "Hyper-V PCI Interface"
+ depends on X86 && HYPERV && PCI_MSI && PCI_MSI_IRQ_DOMAIN && X86_64
+ help
+ The Hyper-V PCI Interface is a helper driver allows other drivers to
+ have a common interface with the Hyper-V PCI frontend driver.
+
source "drivers/pci/controller/dwc/Kconfig"
endmenu
diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile
index d56a507..a2a22c9 100644
--- a/drivers/pci/controller/Makefile
+++ b/drivers/pci/controller/Makefile
@@ -4,6 +4,7 @@ obj-$(CONFIG_PCIE_CADENCE_HOST) += pcie-cadence-host.o
obj-$(CONFIG_PCIE_CADENCE_EP) += pcie-cadence-ep.o
obj-$(CONFIG_PCI_FTPCI100) += pci-ftpci100.o
obj-$(CONFIG_PCI_HYPERV) += pci-hyperv.o
+obj-$(CONFIG_PCI_HYPERV_INTERFACE) += pci-hyperv-intf.o
obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
obj-$(CONFIG_PCI_AARDVARK) += pci-aardvark.o
obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o
diff --git a/drivers/pci/controller/pci-hyperv-intf.c b/drivers/pci/controller/pci-hyperv-intf.c
new file mode 100644
index 0000000..cc96be4
--- /dev/null
+++ b/drivers/pci/controller/pci-hyperv-intf.c
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Microsoft Corporation.
+ *
+ * Author:
+ * Haiyang Zhang <haiyangz@microsoft.com>
+ *
+ * This small module is a helper driver allows other drivers to
+ * have a common interface with the Hyper-V PCI frontend driver.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/hyperv.h>
+
+struct hyperv_pci_block_ops hvpci_block_ops;
+EXPORT_SYMBOL_GPL(hvpci_block_ops);
+
+int hyperv_read_cfg_blk(struct pci_dev *dev, void *buf, unsigned int buf_len,
+ unsigned int block_id, unsigned int *bytes_returned)
+{
+ if (!hvpci_block_ops.read_block)
+ return -EOPNOTSUPP;
+
+ return hvpci_block_ops.read_block(dev, buf, buf_len, block_id,
+ bytes_returned);
+}
+EXPORT_SYMBOL_GPL(hyperv_read_cfg_blk);
+
+int hyperv_write_cfg_blk(struct pci_dev *dev, void *buf, unsigned int len,
+ unsigned int block_id)
+{
+ if (!hvpci_block_ops.write_block)
+ return -EOPNOTSUPP;
+
+ return hvpci_block_ops.write_block(dev, buf, len, block_id);
+}
+EXPORT_SYMBOL_GPL(hyperv_write_cfg_blk);
+
+int hyperv_reg_block_invalidate(struct pci_dev *dev, void *context,
+ void (*block_invalidate)(void *context,
+ u64 block_mask))
+{
+ if (!hvpci_block_ops.reg_blk_invalidate)
+ return -EOPNOTSUPP;
+
+ return hvpci_block_ops.reg_blk_invalidate(dev, context,
+ block_invalidate);
+}
+EXPORT_SYMBOL_GPL(hyperv_reg_block_invalidate);
+
+static void __exit exit_hv_pci_intf(void)
+{
+}
+
+static int __init init_hv_pci_intf(void)
+{
+ return 0;
+}
+
+module_init(init_hv_pci_intf);
+module_exit(exit_hv_pci_intf);
+
+MODULE_DESCRIPTION("Hyper-V PCI Interface");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
index 57adeca..9c93ac2 100644
--- a/drivers/pci/controller/pci-hyperv.c
+++ b/drivers/pci/controller/pci-hyperv.c
@@ -983,7 +983,6 @@ int hv_read_config_block(struct pci_dev *pdev, void *buf, unsigned int len,
*bytes_returned = comp_pkt.bytes_returned;
return 0;
}
-EXPORT_SYMBOL(hv_read_config_block);
/**
* hv_pci_write_config_compl() - Invoked when a response packet for a write
@@ -1070,7 +1069,6 @@ int hv_write_config_block(struct pci_dev *pdev, void *buf, unsigned int len,
return 0;
}
-EXPORT_SYMBOL(hv_write_config_block);
/**
* hv_register_block_invalidate() - Invoked when a config block invalidation
@@ -1101,7 +1099,6 @@ int hv_register_block_invalidate(struct pci_dev *pdev, void *context,
return 0;
}
-EXPORT_SYMBOL(hv_register_block_invalidate);
/* Interrupt management hooks */
static void hv_int_desc_free(struct hv_pci_dev *hpdev,
@@ -3045,10 +3042,19 @@ static int hv_pci_remove(struct hv_device *hdev)
static void __exit exit_hv_pci_drv(void)
{
vmbus_driver_unregister(&hv_pci_drv);
+
+ hvpci_block_ops.read_block = NULL;
+ hvpci_block_ops.write_block = NULL;
+ hvpci_block_ops.reg_blk_invalidate = NULL;
}
static int __init init_hv_pci_drv(void)
{
+ /* Initialize PCI block r/w interface */
+ hvpci_block_ops.read_block = hv_read_config_block;
+ hvpci_block_ops.write_block = hv_write_config_block;
+ hvpci_block_ops.reg_blk_invalidate = hv_register_block_invalidate;
+
return vmbus_driver_register(&hv_pci_drv);
}
diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h
index 9d37f8c..2afe6fd 100644
--- a/include/linux/hyperv.h
+++ b/include/linux/hyperv.h
@@ -1579,18 +1579,32 @@ struct vmpacket_descriptor *
pkt = hv_pkt_iter_next(channel, pkt))
/*
- * Functions for passing data between SR-IOV PF and VF drivers. The VF driver
+ * Interface for passing data between SR-IOV PF and VF drivers. The VF driver
* sends requests to read and write blocks. Each block must be 128 bytes or
* smaller. Optionally, the VF driver can register a callback function which
* will be invoked when the host says that one or more of the first 64 block
* IDs is "invalid" which means that the VF driver should reread them.
*/
#define HV_CONFIG_BLOCK_SIZE_MAX 128
-int hv_read_config_block(struct pci_dev *dev, void *buf, unsigned int buf_len,
- unsigned int block_id, unsigned int *bytes_returned);
-int hv_write_config_block(struct pci_dev *dev, void *buf, unsigned int len,
- unsigned int block_id);
-int hv_register_block_invalidate(struct pci_dev *dev, void *context,
- void (*block_invalidate)(void *context,
- u64 block_mask));
+
+int hyperv_read_cfg_blk(struct pci_dev *dev, void *buf, unsigned int buf_len,
+ unsigned int block_id, unsigned int *bytes_returned);
+int hyperv_write_cfg_blk(struct pci_dev *dev, void *buf, unsigned int len,
+ unsigned int block_id);
+int hyperv_reg_block_invalidate(struct pci_dev *dev, void *context,
+ void (*block_invalidate)(void *context,
+ u64 block_mask));
+
+struct hyperv_pci_block_ops {
+ int (*read_block)(struct pci_dev *dev, void *buf, unsigned int buf_len,
+ unsigned int block_id, unsigned int *bytes_returned);
+ int (*write_block)(struct pci_dev *dev, void *buf, unsigned int len,
+ unsigned int block_id);
+ int (*reg_blk_invalidate)(struct pci_dev *dev, void *context,
+ void (*block_invalidate)(void *context,
+ u64 block_mask));
+};
+
+extern struct hyperv_pci_block_ops hvpci_block_ops;
+
#endif /* _HYPERV_H */
--
1.8.3.1
next prev parent reply other threads:[~2019-08-22 22:27 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-22 22:26 [PATCH net-next,v5, 0/6] Add software backchannel and mlx5e HV VHCA stats Haiyang Zhang
2019-08-22 22:26 ` [PATCH net-next,v5, 1/6] PCI: hv: Add a paravirtual backchannel in software Haiyang Zhang
2019-08-22 22:26 ` Haiyang Zhang [this message]
2019-08-22 22:26 ` [PATCH net-next,v5, 3/6] net/mlx5: Add wrappers for HyperV PCIe operations Haiyang Zhang
2019-08-22 22:26 ` [PATCH net-next,v5, 4/6] net/mlx5: Add HV VHCA infrastructure Haiyang Zhang
2019-08-22 22:26 ` [PATCH net-next,v5, 5/6] net/mlx5: Add HV VHCA control agent Haiyang Zhang
2019-08-22 22:26 ` [PATCH net-next,v5, 6/6] net/mlx5e: Add mlx5e HV VHCA stats agent Haiyang Zhang
2019-08-22 22:33 ` [PATCH net-next,v5, 0/6] Add software backchannel and mlx5e HV VHCA stats David Miller
2019-08-22 22:37 ` Haiyang Zhang
2019-08-22 22:39 ` David Miller
2019-08-22 22:43 ` Haiyang Zhang
2019-08-23 5:05 ` Eran Ben Elisha
2019-08-23 5:29 ` Saeed Mahameed
2019-08-23 6:11 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1566512708-13785-3-git-send-email-haiyangz@microsoft.com \
--to=haiyangz@microsoft.com \
--cc=bhelgaas@google.com \
--cc=davem@davemloft.net \
--cc=eranbe@mellanox.com \
--cc=kys@microsoft.com \
--cc=leon@kernel.org \
--cc=linux-hyperv@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=netdev@vger.kernel.org \
--cc=saeedm@mellanox.com \
--cc=sashal@kernel.org \
--cc=sthemmin@microsoft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).