Linux-HyperV Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v6] x86/hyperv: Suspend/resume the hypercall page for hibernation
@ 2019-11-20  7:09 Dexuan Cui
  0 siblings, 0 replies; only message in thread
From: Dexuan Cui @ 2019-11-20  7:09 UTC (permalink / raw)
  To: arnd, bp, daniel.lezcano, haiyangz, hpa, kys, linux-hyperv,
	linux-kernel, mingo, sashal, sthemmin, tglx, x86, mikelley,
	Alexander.Levin, vkuznets
  Cc: linux-arch, Dexuan Cui

This is needed for hibernation, e.g. when we resume the old kernel, we need
to disable the "current" kernel's hypercall page and then resume the old
kernel's.

Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
---

This patch is part of the v5 patchset:
  https://lkml.org/lkml/2019/9/5/1158
  https://lkml.org/lkml/2019/9/5/1159 

  The change is: I set 'hv_hypercall_pg' to NULL in hv_suspend(), and
restore it in hv_resume(). This is suggested by Vitaly Kuznetsov.

  There is no other change, compared to v1 (v2~v5 were posted with the other
patches).

  Please pick up this patch onto the tip.git tree's branch x86/hyperv.

 arch/x86/hyperv/hv_init.c | 48 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
index 426dc8b78193..c170653da589 100644
--- a/arch/x86/hyperv/hv_init.c
+++ b/arch/x86/hyperv/hv_init.c
@@ -20,11 +20,15 @@
 #include <linux/hyperv.h>
 #include <linux/slab.h>
 #include <linux/cpuhotplug.h>
+#include <linux/syscore_ops.h>
 #include <clocksource/hyperv_timer.h>
 
 void *hv_hypercall_pg;
 EXPORT_SYMBOL_GPL(hv_hypercall_pg);
 
+/* Save the hypercall page temporarily for hibernation */
+static void *hv_hypercall_pg_saved;
+
 u32 *hv_vp_index;
 EXPORT_SYMBOL_GPL(hv_vp_index);
 
@@ -245,6 +249,46 @@ static int __init hv_pci_init(void)
 	return 1;
 }
 
+static int hv_suspend(void)
+{
+	union hv_x64_msr_hypercall_contents hypercall_msr;
+
+	/*
+	 * Reset hypercall page reference before reset the page,
+	 * let hypercall operations fail safely rather than
+	 * panic the kernel for using invalid hypercall page
+	 */
+	hv_hypercall_pg_saved = hv_hypercall_pg;
+	hv_hypercall_pg = NULL;
+
+	/* Reset the hypercall page */
+	rdmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
+	hypercall_msr.enable = 0;
+	wrmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
+
+	return 0;
+}
+
+static void hv_resume(void)
+{
+	union hv_x64_msr_hypercall_contents hypercall_msr;
+
+	/* Re-enable the hypercall page */
+	rdmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
+	hypercall_msr.enable = 1;
+	hypercall_msr.guest_physical_address =
+		vmalloc_to_pfn(hv_hypercall_pg_saved);
+	wrmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
+
+	hv_hypercall_pg = hv_hypercall_pg_saved;
+	hv_hypercall_pg_saved = NULL;
+}
+
+static struct syscore_ops hv_syscore_ops = {
+	.suspend = hv_suspend,
+	.resume = hv_resume,
+};
+
 /*
  * This function is to be invoked early in the boot sequence after the
  * hypervisor has been detected.
@@ -329,6 +373,8 @@ void __init hyperv_init(void)
 
 	x86_init.pci.arch_init = hv_pci_init;
 
+	register_syscore_ops(&hv_syscore_ops);
+
 	return;
 
 remove_cpuhp_state:
@@ -348,6 +394,8 @@ void hyperv_cleanup(void)
 {
 	union hv_x64_msr_hypercall_contents hypercall_msr;
 
+	unregister_syscore_ops(&hv_syscore_ops);
+
 	/* Reset our OS id */
 	wrmsrl(HV_X64_MSR_GUEST_OS_ID, 0);
 
-- 
2.19.1


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-20  7:09 [PATCH v6] x86/hyperv: Suspend/resume the hypercall page for hibernation Dexuan Cui

Linux-HyperV Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-hyperv/0 linux-hyperv/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-hyperv linux-hyperv/ https://lore.kernel.org/linux-hyperv \
		linux-hyperv@vger.kernel.org
	public-inbox-index linux-hyperv

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-hyperv


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git