Linux-HyperV Archive on lore.kernel.org
 help / color / Atom feed
From: Andrea Parri <parri.andrea@gmail.com>
To: linux-kernel@vger.kernel.org, linux-hyperv@vger.kernel.org,
	netdev@vger.kernel.org
Cc: "K . Y . Srinivasan" <kys@microsoft.com>,
	Haiyang Zhang <haiyangz@microsoft.com>,
	Stephen Hemminger <sthemmin@microsoft.com>,
	Sasha Levin <sashal@kernel.org>,
	"David S . Miller" <davem@davemloft.net>,
	Michael Kelley <mikelley@microsoft.com>,
	Vitaly Kuznetsov <vkuznets@redhat.com>,
	Dexuan Cui <decui@microsoft.com>,
	Andrea Parri <parri.andrea@gmail.com>
Subject: [PATCH v2 1/3] Drivers: hv: vmbus: Introduce table of VMBus protocol versions
Date: Thu, 10 Oct 2019 17:45:58 +0200
Message-ID: <20191010154600.23875-2-parri.andrea@gmail.com> (raw)
In-Reply-To: <20191010154600.23875-1-parri.andrea@gmail.com>

The technique used to get the next VMBus version seems increasisly
clumsy as the number of VMBus versions increases.  Performance is
not a concern since this is only done once during system boot; it's
just that we'll end up with more lines of code than is really needed.

As an alternative, introduce a table with the version numbers listed
in order (from the most recent to the oldest).  vmbus_connect() loops
through the versions listed in the table until it gets an accepted
connection or gets to the end of the table (invalid version).

Suggested-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
---
 drivers/hv/connection.c | 46 ++++++++++++++---------------------------
 drivers/hv/vmbus_drv.c  |  3 +--
 include/linux/hyperv.h  |  4 ----
 3 files changed, 17 insertions(+), 36 deletions(-)

diff --git a/drivers/hv/connection.c b/drivers/hv/connection.c
index 6e4c015783ffc..b1f805426e6b4 100644
--- a/drivers/hv/connection.c
+++ b/drivers/hv/connection.c
@@ -40,29 +40,17 @@ EXPORT_SYMBOL_GPL(vmbus_connection);
 __u32 vmbus_proto_version;
 EXPORT_SYMBOL_GPL(vmbus_proto_version);
 
-static __u32 vmbus_get_next_version(__u32 current_version)
-{
-	switch (current_version) {
-	case (VERSION_WIN7):
-		return VERSION_WS2008;
-
-	case (VERSION_WIN8):
-		return VERSION_WIN7;
-
-	case (VERSION_WIN8_1):
-		return VERSION_WIN8;
-
-	case (VERSION_WIN10):
-		return VERSION_WIN8_1;
-
-	case (VERSION_WIN10_V5):
-		return VERSION_WIN10;
-
-	case (VERSION_WS2008):
-	default:
-		return VERSION_INVAL;
-	}
-}
+/*
+ * Table of VMBus versions listed from newest to oldest.
+ */
+static __u32 vmbus_versions[] = {
+	VERSION_WIN10_V5,
+	VERSION_WIN10,
+	VERSION_WIN8_1,
+	VERSION_WIN8,
+	VERSION_WIN7,
+	VERSION_WS2008
+};
 
 int vmbus_negotiate_version(struct vmbus_channel_msginfo *msginfo, u32 version)
 {
@@ -169,8 +157,8 @@ int vmbus_negotiate_version(struct vmbus_channel_msginfo *msginfo, u32 version)
  */
 int vmbus_connect(void)
 {
-	int ret = 0;
 	struct vmbus_channel_msginfo *msginfo = NULL;
+	int i, ret = 0;
 	__u32 version;
 
 	/* Initialize the vmbus connection */
@@ -244,20 +232,18 @@ int vmbus_connect(void)
 	 * version.
 	 */
 
-	version = VERSION_CURRENT;
+	for (i = 0; i < ARRAY_SIZE(vmbus_versions); i++) {
+		version = vmbus_versions[i];
 
-	do {
 		ret = vmbus_negotiate_version(msginfo, version);
 		if (ret == -ETIMEDOUT)
 			goto cleanup;
 
 		if (vmbus_connection.conn_state == CONNECTED)
 			break;
+	}
 
-		version = vmbus_get_next_version(version);
-	} while (version != VERSION_INVAL);
-
-	if (version == VERSION_INVAL)
+	if (vmbus_connection.conn_state != CONNECTED)
 		goto cleanup;
 
 	vmbus_proto_version = version;
diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index 391f0b225c9ae..a0cd65ab9a950 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -2215,8 +2215,7 @@ static int vmbus_bus_resume(struct device *dev)
 	 * We only use the 'vmbus_proto_version', which was in use before
 	 * hibernation, to re-negotiate with the host.
 	 */
-	if (vmbus_proto_version == VERSION_INVAL ||
-	    vmbus_proto_version == 0) {
+	if (!vmbus_proto_version) {
 		pr_err("Invalid proto version = 0x%x\n", vmbus_proto_version);
 		return -EINVAL;
 	}
diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h
index b4a017093b697..c08b62dbd151f 100644
--- a/include/linux/hyperv.h
+++ b/include/linux/hyperv.h
@@ -192,10 +192,6 @@ static inline u32 hv_get_avail_to_write_percent(
 #define VERSION_WIN10	((4 << 16) | (0))
 #define VERSION_WIN10_V5 ((5 << 16) | (0))
 
-#define VERSION_INVAL -1
-
-#define VERSION_CURRENT VERSION_WIN10_V5
-
 /* Make maximum size of pipe payload of 16K */
 #define MAX_PIPE_DATA_PAYLOAD		(sizeof(u8) * 16384)
 
-- 
2.23.0


  reply index

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-10 15:45 [PATCH v2 0/3] Drivers: hv: vmbus: Miscellaneous improvements Andrea Parri
2019-10-10 15:45 ` Andrea Parri [this message]
2019-10-12 13:47   ` [PATCH v2 1/3] Drivers: hv: vmbus: Introduce table of VMBus protocol versions Michael Kelley
2019-10-14  9:52     ` Andrea Parri
2019-10-10 15:45 ` [PATCH v2 2/3] Drivers: hv: vmbus: Enable VMBus protocol versions 4.1, 5.1 and 5.2 Andrea Parri
2019-10-12 13:34   ` Michael Kelley
2019-10-14 10:09     ` Andrea Parri
2019-10-10 15:46 ` [PATCH v2 3/3] Drivers: hv: vmbus: Add module parameter to cap the VMBus version Andrea Parri

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191010154600.23875-2-parri.andrea@gmail.com \
    --to=parri.andrea@gmail.com \
    --cc=davem@davemloft.net \
    --cc=decui@microsoft.com \
    --cc=haiyangz@microsoft.com \
    --cc=kys@microsoft.com \
    --cc=linux-hyperv@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mikelley@microsoft.com \
    --cc=netdev@vger.kernel.org \
    --cc=sashal@kernel.org \
    --cc=sthemmin@microsoft.com \
    --cc=vkuznets@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-HyperV Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-hyperv/0 linux-hyperv/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-hyperv linux-hyperv/ https://lore.kernel.org/linux-hyperv \
		linux-hyperv@vger.kernel.org
	public-inbox-index linux-hyperv

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-hyperv


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git