From: Wei Hu <weh@microsoft.com>
To: kys@microsoft.com, haiyangz@microsoft.com,
sthemmin@microsoft.com, wei.liu@kernel.org,
lorenzo.pieralisi@arm.com, robh@kernel.org, bhelgaas@google.com,
linux-hyperv@vger.kernel.org, linux-pci@vger.kernel.org,
linux-kernel@vger.kernel.org, decui@microsoft.com,
mikelley@microsoft.com
Cc: Wei Hu <weh@microsoft.com>
Subject: [PATCH v3] PCI: hv: Fix a timing issue which causes kdump to fail occasionally
Date: Sat, 18 Jul 2020 11:47:52 +0800 [thread overview]
Message-ID: <20200718034752.4843-1-weh@microsoft.com> (raw)
Kdump could fail sometime on Hyper-V guest over Accelerated Network
interface. This is because the retry in hv_pci_enter_d0() relies on
an asynchronous host event arriving before the guest calls
hv_send_resources_allocated(). Fix the problem by moving retry
to hv_pci_probe(), removing this dependency and making the calling
sequence synchronous.
Fixes: c81992e7f4aa ("PCI: hv: Retry PCI bus D0 entry on invalid device state")
Signed-off-by: Wei Hu <weh@microsoft.com>
---
v2: Adding Fixes tag according to Michael Kelley's review comment.
v3: Fix couple typos and reword commit message to make it clearer.
Thanks the comments from Bjorn Helgaas.
drivers/pci/controller/pci-hyperv.c | 66 ++++++++++++++---------------
1 file changed, 32 insertions(+), 34 deletions(-)
diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
index bf40ff09c99d..738ee30f3334 100644
--- a/drivers/pci/controller/pci-hyperv.c
+++ b/drivers/pci/controller/pci-hyperv.c
@@ -2759,10 +2759,8 @@ static int hv_pci_enter_d0(struct hv_device *hdev)
struct pci_bus_d0_entry *d0_entry;
struct hv_pci_compl comp_pkt;
struct pci_packet *pkt;
- bool retry = true;
int ret;
-enter_d0_retry:
/*
* Tell the host that the bus is ready to use, and moved into the
* powered-on state. This includes telling the host which region
@@ -2789,38 +2787,6 @@ static int hv_pci_enter_d0(struct hv_device *hdev)
if (ret)
goto exit;
- /*
- * In certain case (Kdump) the pci device of interest was
- * not cleanly shut down and resource is still held on host
- * side, the host could return invalid device status.
- * We need to explicitly request host to release the resource
- * and try to enter D0 again.
- */
- if (comp_pkt.completion_status < 0 && retry) {
- retry = false;
-
- dev_err(&hdev->device, "Retrying D0 Entry\n");
-
- /*
- * Hv_pci_bus_exit() calls hv_send_resource_released()
- * to free up resources of its child devices.
- * In the kdump kernel we need to set the
- * wslot_res_allocated to 255 so it scans all child
- * devices to release resources allocated in the
- * normal kernel before panic happened.
- */
- hbus->wslot_res_allocated = 255;
-
- ret = hv_pci_bus_exit(hdev, true);
-
- if (ret == 0) {
- kfree(pkt);
- goto enter_d0_retry;
- }
- dev_err(&hdev->device,
- "Retrying D0 failed with ret %d\n", ret);
- }
-
if (comp_pkt.completion_status < 0) {
dev_err(&hdev->device,
"PCI Pass-through VSP failed D0 Entry with status %x\n",
@@ -3058,6 +3024,7 @@ static int hv_pci_probe(struct hv_device *hdev,
struct hv_pcibus_device *hbus;
u16 dom_req, dom;
char *name;
+ bool enter_d0_retry = true;
int ret;
/*
@@ -3178,11 +3145,42 @@ static int hv_pci_probe(struct hv_device *hdev,
if (ret)
goto free_fwnode;
+retry:
ret = hv_pci_query_relations(hdev);
if (ret)
goto free_irq_domain;
ret = hv_pci_enter_d0(hdev);
+ /*
+ * In certain case (Kdump) the pci device of interest was
+ * not cleanly shut down and resource is still held on host
+ * side, the host could return invalid device status.
+ * We need to explicitly request host to release the resource
+ * and try to enter D0 again.
+ * The retry should start from hv_pci_query_relations() call.
+ */
+ if (ret == -EPROTO && enter_d0_retry) {
+ enter_d0_retry = false;
+
+ dev_err(&hdev->device, "Retrying D0 Entry\n");
+
+ /*
+ * Hv_pci_bus_exit() calls hv_send_resources_released()
+ * to free up resources of its child devices.
+ * In the kdump kernel we need to set the
+ * wslot_res_allocated to 255 so it scans all child
+ * devices to release resources allocated in the
+ * normal kernel before panic happened.
+ */
+ hbus->wslot_res_allocated = 255;
+ ret = hv_pci_bus_exit(hdev, true);
+
+ if (ret == 0)
+ goto retry;
+
+ dev_err(&hdev->device,
+ "Retrying D0 failed with ret %d\n", ret);
+ }
if (ret)
goto free_irq_domain;
--
2.20.1
next reply other threads:[~2020-07-18 3:48 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-18 3:47 Wei Hu [this message]
2020-07-20 16:27 ` [PATCH v3] PCI: hv: Fix a timing issue which causes kdump to fail occasionally Michael Kelley
2020-07-23 11:14 ` Lorenzo Pieralisi
2020-07-23 15:52 ` Wei Hu
2020-07-23 16:36 ` Lorenzo Pieralisi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200718034752.4843-1-weh@microsoft.com \
--to=weh@microsoft.com \
--cc=bhelgaas@google.com \
--cc=decui@microsoft.com \
--cc=haiyangz@microsoft.com \
--cc=kys@microsoft.com \
--cc=linux-hyperv@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=mikelley@microsoft.com \
--cc=robh@kernel.org \
--cc=sthemmin@microsoft.com \
--cc=wei.liu@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).