From: Vitaly Kuznetsov <vkuznets@redhat.com>
To: kvm@vger.kernel.org, Paolo Bonzini <pbonzini@redhat.com>,
Sean Christopherson <seanjc@google.com>
Cc: Wanpeng Li <wanpengli@tencent.com>,
Jim Mattson <jmattson@google.com>,
Michael Kelley <mikelley@microsoft.com>,
Siddharth Chandrasekaran <sidcha@amazon.de>,
Yuan Yao <yuan.yao@linux.intel.com>,
Maxim Levitsky <mlevitsk@redhat.com>,
linux-hyperv@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v9 39/40] KVM: selftests: hyperv_svm_test: Introduce L2 TLB flush test
Date: Wed, 3 Aug 2022 15:47:16 +0200 [thread overview]
Message-ID: <20220803134716.399608-1-vkuznets@redhat.com> (raw)
In-Reply-To: <20220803134110.397885-1-vkuznets@redhat.com>
Enable Hyper-V L2 TLB flush and check that Hyper-V TLB flush hypercalls
from L2 don't exit to L1 unless 'TlbLockCount' is set in the Partition
assist page.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
---
.../selftests/kvm/x86_64/hyperv_svm_test.c | 64 +++++++++++++++++--
1 file changed, 59 insertions(+), 5 deletions(-)
diff --git a/tools/testing/selftests/kvm/x86_64/hyperv_svm_test.c b/tools/testing/selftests/kvm/x86_64/hyperv_svm_test.c
index a380ad7bb9b3..3bd9e4ceb33f 100644
--- a/tools/testing/selftests/kvm/x86_64/hyperv_svm_test.c
+++ b/tools/testing/selftests/kvm/x86_64/hyperv_svm_test.c
@@ -41,8 +41,13 @@ struct hv_enlightenments {
*/
#define VMCB_HV_NESTED_ENLIGHTENMENTS (1U << 31)
+#define HV_SVM_EXITCODE_ENL 0xF0000000
+#define HV_SVM_ENL_EXITCODE_TRAP_AFTER_FLUSH (1)
+
void l2_guest_code(void)
{
+ u64 unused;
+
GUEST_SYNC(3);
/* Exit to L1 */
vmmcall();
@@ -56,11 +61,30 @@ void l2_guest_code(void)
GUEST_SYNC(5);
+ /* L2 TLB flush tests */
+ hyperv_hypercall(HVCALL_FLUSH_VIRTUAL_ADDRESS_SPACE |
+ HV_HYPERCALL_FAST_BIT, 0x0,
+ HV_FLUSH_ALL_VIRTUAL_ADDRESS_SPACES |
+ HV_FLUSH_ALL_PROCESSORS);
+ rdmsr(MSR_FS_BASE);
+ /*
+ * Note: hypercall status (RAX) is not preserved correctly by L1 after
+ * synthetic vmexit, use unchecked version.
+ */
+ __hyperv_hypercall(HVCALL_FLUSH_VIRTUAL_ADDRESS_SPACE |
+ HV_HYPERCALL_FAST_BIT, 0x0,
+ HV_FLUSH_ALL_VIRTUAL_ADDRESS_SPACES |
+ HV_FLUSH_ALL_PROCESSORS, &unused);
+ /* Make sure we're not issuing Hyper-V TLB flush call again */
+ __asm__ __volatile__ ("mov $0xdeadbeef, %rcx");
+
/* Done, exit to L1 and never come back. */
vmmcall();
}
-static void __attribute__((__flatten__)) guest_code(struct svm_test_data *svm)
+static void __attribute__((__flatten__)) guest_code(struct svm_test_data *svm,
+ struct hyperv_test_pages *hv_pages,
+ vm_vaddr_t pgs_gpa)
{
unsigned long l2_guest_stack[L2_GUEST_STACK_SIZE];
struct vmcb *vmcb = svm->vmcb;
@@ -69,13 +93,23 @@ static void __attribute__((__flatten__)) guest_code(struct svm_test_data *svm)
GUEST_SYNC(1);
- wrmsr(HV_X64_MSR_GUEST_OS_ID, (u64)0x8100 << 48);
+ wrmsr(HV_X64_MSR_GUEST_OS_ID, HYPERV_LINUX_OS_ID);
+ wrmsr(HV_X64_MSR_HYPERCALL, pgs_gpa);
+ enable_vp_assist(hv_pages->vp_assist_gpa, hv_pages->vp_assist);
GUEST_ASSERT(svm->vmcb_gpa);
/* Prepare for L2 execution. */
generic_svm_setup(svm, l2_guest_code,
&l2_guest_stack[L2_GUEST_STACK_SIZE]);
+ /* L2 TLB flush setup */
+ hve->partition_assist_page = hv_pages->partition_assist_gpa;
+ hve->hv_enlightenments_control.nested_flush_hypercall = 1;
+ hve->hv_vm_id = 1;
+ hve->hv_vp_id = 1;
+ current_vp_assist->nested_control.features.directhypercall = 1;
+ *(u32 *)(hv_pages->partition_assist) = 0;
+
GUEST_SYNC(2);
run_guest(vmcb, svm->vmcb_gpa);
GUEST_ASSERT(vmcb->control.exit_code == SVM_EXIT_VMMCALL);
@@ -110,6 +144,20 @@ static void __attribute__((__flatten__)) guest_code(struct svm_test_data *svm)
GUEST_ASSERT(vmcb->control.exit_code == SVM_EXIT_MSR);
vmcb->save.rip += 2; /* rdmsr */
+
+ /*
+ * L2 TLB flush test. First VMCALL should be handled directly by L0,
+ * no VMCALL exit expected.
+ */
+ run_guest(vmcb, svm->vmcb_gpa);
+ GUEST_ASSERT(vmcb->control.exit_code == SVM_EXIT_MSR);
+ vmcb->save.rip += 2; /* rdmsr */
+ /* Enable synthetic vmexit */
+ *(u32 *)(hv_pages->partition_assist) = 1;
+ run_guest(vmcb, svm->vmcb_gpa);
+ GUEST_ASSERT(vmcb->control.exit_code == HV_SVM_EXITCODE_ENL);
+ GUEST_ASSERT(vmcb->control.exit_info_1 == HV_SVM_ENL_EXITCODE_TRAP_AFTER_FLUSH);
+
run_guest(vmcb, svm->vmcb_gpa);
GUEST_ASSERT(vmcb->control.exit_code == SVM_EXIT_VMMCALL);
GUEST_SYNC(6);
@@ -119,8 +167,8 @@ static void __attribute__((__flatten__)) guest_code(struct svm_test_data *svm)
int main(int argc, char *argv[])
{
- vm_vaddr_t nested_gva = 0;
-
+ vm_vaddr_t nested_gva = 0, hv_pages_gva = 0;
+ vm_vaddr_t hcall_page;
struct kvm_vcpu *vcpu;
struct kvm_vm *vm;
struct kvm_run *run;
@@ -134,7 +182,13 @@ int main(int argc, char *argv[])
vcpu_set_hv_cpuid(vcpu);
run = vcpu->run;
vcpu_alloc_svm(vm, &nested_gva);
- vcpu_args_set(vcpu, 1, nested_gva);
+ vcpu_alloc_hyperv_test_pages(vm, &hv_pages_gva);
+
+ hcall_page = vm_vaddr_alloc_pages(vm, 1);
+ memset(addr_gva2hva(vm, hcall_page), 0x0, getpagesize());
+
+ vcpu_args_set(vcpu, 3, nested_gva, hv_pages_gva, addr_gva2gpa(vm, hcall_page));
+ vcpu_set_msr(vcpu, HV_X64_MSR_VP_INDEX, vcpu->id);
for (stage = 1;; stage++) {
vcpu_run(vcpu);
--
2.35.3
next prev parent reply other threads:[~2022-08-03 13:49 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-03 13:40 [PATCH v9 00/40] KVM: x86: hyper-v: Fine-grained TLB flush + L2 TLB flush features Vitaly Kuznetsov
2022-08-03 13:40 ` [PATCH v9 01/40] KVM: x86: Rename 'enable_direct_tlbflush' to 'enable_l2_tlb_flush' Vitaly Kuznetsov
2022-08-03 13:40 ` [PATCH v9 02/40] KVM: x86: hyper-v: Resurrect dedicated KVM_REQ_HV_TLB_FLUSH flag Vitaly Kuznetsov
2022-08-03 13:40 ` [PATCH v9 03/40] KVM: x86: hyper-v: Introduce TLB flush fifo Vitaly Kuznetsov
2022-08-03 13:40 ` [PATCH v9 04/40] KVM: x86: hyper-v: Add helper to read hypercall data for array Vitaly Kuznetsov
2022-08-03 13:40 ` [PATCH v9 05/40] KVM: x86: hyper-v: Handle HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST{,EX} calls gently Vitaly Kuznetsov
2022-08-03 13:40 ` [PATCH v9 06/40] KVM: x86: hyper-v: Expose support for extended gva ranges for flush hypercalls Vitaly Kuznetsov
2022-08-03 13:40 ` [PATCH v9 07/40] KVM: x86: Prepare kvm_hv_flush_tlb() to handle L2's GPAs Vitaly Kuznetsov
2022-08-03 13:40 ` [PATCH v9 08/40] x86/hyperv: Introduce HV_MAX_SPARSE_VCPU_BANKS/HV_VCPUS_PER_SPARSE_BANK constants Vitaly Kuznetsov
2022-08-03 13:40 ` [PATCH v9 09/40] KVM: x86: hyper-v: Use HV_MAX_SPARSE_VCPU_BANKS/HV_VCPUS_PER_SPARSE_BANK instead of raw '64' Vitaly Kuznetsov
2022-08-03 13:40 ` [PATCH v9 10/40] KVM: x86: hyper-v: Don't use sparse_set_to_vcpu_mask() in kvm_hv_send_ipi() Vitaly Kuznetsov
2022-08-03 13:45 ` [PATCH v9 11/40] KVM: x86: hyper-v: Create a separate fifo for L2 TLB flush Vitaly Kuznetsov
2022-08-03 13:45 ` [PATCH v9 12/40] KVM: x86: hyper-v: Use preallocated buffer in 'struct kvm_vcpu_hv' instead of on-stack 'sparse_banks' Vitaly Kuznetsov
2022-08-03 13:45 ` [PATCH v9 13/40] KVM: nVMX: Keep track of hv_vm_id/hv_vp_id when eVMCS is in use Vitaly Kuznetsov
2022-08-03 13:45 ` [PATCH v9 14/40] KVM: nSVM: Keep track of Hyper-V hv_vm_id/hv_vp_id Vitaly Kuznetsov
2022-08-03 13:45 ` [PATCH v9 15/40] KVM: x86: Introduce .hv_inject_synthetic_vmexit_post_tlb_flush() nested hook Vitaly Kuznetsov
2022-08-03 13:45 ` [PATCH v9 16/40] KVM: x86: hyper-v: Introduce kvm_hv_is_tlb_flush_hcall() Vitaly Kuznetsov
2022-08-03 13:45 ` [PATCH v9 17/40] KVM: x86: hyper-v: L2 TLB flush Vitaly Kuznetsov
2022-08-03 13:46 ` [PATCH v9 18/40] KVM: x86: hyper-v: Introduce fast guest_hv_cpuid_has_l2_tlb_flush() check Vitaly Kuznetsov
2022-08-03 13:46 ` [PATCH v9 19/40] x86/hyperv: Fix 'struct hv_enlightened_vmcs' definition Vitaly Kuznetsov
2022-08-03 13:46 ` [PATCH v9 20/40] KVM: nVMX: hyper-v: Cache VP assist page in 'struct kvm_vcpu_hv' Vitaly Kuznetsov
2022-08-03 13:46 ` [PATCH v9 21/40] KVM: nVMX: hyper-v: Enable L2 TLB flush Vitaly Kuznetsov
2022-08-03 13:46 ` [PATCH v9 22/40] KVM: nSVM: " Vitaly Kuznetsov
2022-08-03 13:46 ` [PATCH v9 23/40] KVM: x86: Expose Hyper-V L2 TLB flush feature Vitaly Kuznetsov
2022-08-03 13:46 ` [PATCH v9 24/40] KVM: selftests: Better XMM read/write helpers Vitaly Kuznetsov
2022-08-03 13:46 ` [PATCH v9 25/40] KVM: selftests: Move HYPERV_LINUX_OS_ID definition to a common header Vitaly Kuznetsov
2022-08-03 13:46 ` [PATCH v9 26/40] KVM: selftests: Move the function doing Hyper-V hypercall " Vitaly Kuznetsov
2022-08-03 13:46 ` [PATCH v9 27/40] KVM: selftests: Hyper-V PV IPI selftest Vitaly Kuznetsov
2022-08-03 13:46 ` [PATCH v9 28/40] KVM: selftests: Fill in vm->vpages_mapped bitmap in virt_map() too Vitaly Kuznetsov
2022-08-03 14:29 ` Andrew Jones
2022-08-03 13:46 ` [PATCH v9 29/40] KVM: selftests: Export vm_vaddr_unused_gap() to make it possible to request unmapped ranges Vitaly Kuznetsov
2022-08-03 13:46 ` [PATCH v9 30/40] KVM: selftests: Export _vm_get_page_table_entry() Vitaly Kuznetsov
2022-08-03 13:46 ` [PATCH v9 31/40] KVM: selftests: Hyper-V PV TLB flush selftest Vitaly Kuznetsov
2022-08-03 13:46 ` [PATCH v9 32/40] KVM: selftests: Sync 'struct hv_enlightened_vmcs' definition with hyperv-tlfs.h Vitaly Kuznetsov
2022-08-03 13:46 ` [PATCH v9 33/40] KVM: selftests: Sync 'struct hv_vp_assist_page' " Vitaly Kuznetsov
2022-08-03 13:46 ` [PATCH v9 34/40] KVM: selftests: Move Hyper-V VP assist page enablement out of evmcs.h Vitaly Kuznetsov
2022-08-03 13:47 ` [PATCH v9 35/40] KVM: selftests: Split off load_evmcs() from load_vmcs() Vitaly Kuznetsov
2022-08-03 13:47 ` [PATCH v9 36/40] KVM: selftests: Create a vendor independent helper to allocate Hyper-V specific test pages Vitaly Kuznetsov
2022-08-03 13:47 ` [PATCH v9 37/40] KVM: selftests: Allocate Hyper-V partition assist page Vitaly Kuznetsov
2022-08-03 13:47 ` [PATCH v9 38/40] KVM: selftests: evmcs_test: Introduce L2 TLB flush test Vitaly Kuznetsov
2022-08-03 13:47 ` Vitaly Kuznetsov [this message]
2022-08-03 13:47 ` [PATCH v9 40/40] KVM: selftests: Rename 'evmcs_test' to 'hyperv_evmcs' Vitaly Kuznetsov
2022-08-30 13:43 ` [PATCH v9 00/40] KVM: x86: hyper-v: Fine-grained TLB flush + L2 TLB flush features Vitaly Kuznetsov
2022-08-30 16:27 ` Sean Christopherson
2022-09-21 15:15 ` Vitaly Kuznetsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220803134716.399608-1-vkuznets@redhat.com \
--to=vkuznets@redhat.com \
--cc=jmattson@google.com \
--cc=kvm@vger.kernel.org \
--cc=linux-hyperv@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mikelley@microsoft.com \
--cc=mlevitsk@redhat.com \
--cc=pbonzini@redhat.com \
--cc=seanjc@google.com \
--cc=sidcha@amazon.de \
--cc=wanpengli@tencent.com \
--cc=yuan.yao@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).