From: Kashyap Desai <kashyap.desai@broadcom.com>
To: Ming Lei <tom.leiming@gmail.com>, Christoph Hellwig <hch@lst.de>
Cc: "Martin K . Petersen" <martin.petersen@oracle.com>,
Sagi Grimberg <sagi@grimberg.me>,
Max Gurtovoy <maxg@mellanox.com>,
Bart Van Assche <bvanassche@acm.org>,
linux-rdma <linux-rdma@vger.kernel.org>,
Linux SCSI List <linux-scsi@vger.kernel.org>,
"PDL,MEGARAIDLINUX" <megaraidlinux.pdl@broadcom.com>,
PDL-MPT-FUSIONLINUX <mpt-fusionlinux.pdl@broadcom.com>,
linux-hyperv@vger.kernel.org,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Kashyap Desai <kashyap.desai@broadcom.com>
Subject: RE: [PATCH 1/8] scsi: add a host / host template field for the virt boundary
Date: Thu, 20 Jun 2019 11:47:29 +0530 [thread overview]
Message-ID: <6dd62da3ba56142d4a67bc207aa55a59@mail.gmail.com> (raw)
In-Reply-To: <CACVXFVOwCeM2JzefBpKsVZrEaWpSBR0DF8qp4oKfoHm+pwLBYw@mail.gmail.com>
> -----Original Message-----
> From: megaraidlinux.pdl@broadcom.com
> [mailto:megaraidlinux.pdl@broadcom.com] On Behalf Of Ming Lei
> Sent: Tuesday, June 18, 2019 6:05 AM
> To: Christoph Hellwig <hch@lst.de>
> Cc: Martin K . Petersen <martin.petersen@oracle.com>; Sagi Grimberg
> <sagi@grimberg.me>; Max Gurtovoy <maxg@mellanox.com>; Bart Van
> Assche <bvanassche@acm.org>; linux-rdma <linux-rdma@vger.kernel.org>;
> Linux SCSI List <linux-scsi@vger.kernel.org>;
> megaraidlinux.pdl@broadcom.com; MPT-FusionLinux.pdl@broadcom.com;
> linux-hyperv@vger.kernel.org; Linux Kernel Mailing List <linux-
> kernel@vger.kernel.org>
> Subject: Re: [PATCH 1/8] scsi: add a host / host template field for the
> virt
> boundary
>
> On Mon, Jun 17, 2019 at 8:21 PM Christoph Hellwig <hch@lst.de> wrote:
> >
> > This allows drivers setting it up easily instead of branching out to
> > block layer calls in slave_alloc, and ensures the upgraded
> > max_segment_size setting gets picked up by the DMA layer.
> >
> > Signed-off-by: Christoph Hellwig <hch@lst.de>
> > ---
> > drivers/scsi/hosts.c | 3 +++
> > drivers/scsi/scsi_lib.c | 3 ++-
> > include/scsi/scsi_host.h | 3 +++
> > 3 files changed, 8 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c index
> > ff0d8c6a8d0c..55522b7162d3 100644
> > --- a/drivers/scsi/hosts.c
> > +++ b/drivers/scsi/hosts.c
> > @@ -462,6 +462,9 @@ struct Scsi_Host *scsi_host_alloc(struct
> scsi_host_template *sht, int privsize)
> > else
> > shost->dma_boundary = 0xffffffff;
> >
> > + if (sht->virt_boundary_mask)
> > + shost->virt_boundary_mask = sht->virt_boundary_mask;
> > +
> > device_initialize(&shost->shost_gendev);
> > dev_set_name(&shost->shost_gendev, "host%d", shost->host_no);
> > shost->shost_gendev.bus = &scsi_bus_type; diff --git
> > a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index
> > 65d0a10c76ad..d333bb6b1c59 100644
> > --- a/drivers/scsi/scsi_lib.c
> > +++ b/drivers/scsi/scsi_lib.c
> > @@ -1775,7 +1775,8 @@ void __scsi_init_queue(struct Scsi_Host *shost,
> struct request_queue *q)
> > dma_set_seg_boundary(dev, shost->dma_boundary);
> >
> > blk_queue_max_segment_size(q, shost->max_segment_size);
> > - dma_set_max_seg_size(dev, shost->max_segment_size);
> > + blk_queue_virt_boundary(q, shost->virt_boundary_mask);
> > + dma_set_max_seg_size(dev, queue_max_segment_size(q));
>
> The patch looks fine, also suggest to make sure that max_segment_size is
> block-size aligned, and un-aligned max segment size has caused trouble on
> mmc.
I validated changes on latest and few older series controllers.
Post changes, I noticed max_segment_size is updated.
find /sys/ -name max_segment_size |grep sdb |xargs grep -r .
/sys/devices/pci0000:3a/0000:3a:00.0/0000:3b:00.0/0000:3c:04.0/0000:40:00.0/0000:41:00.0/0000:42:00.0/host0/target0:2:12/0:2:12:0/block/sdb/queue/max_segment_size:4294967295
I verify that single SGE having 1MB transfer length is working fine.
Acked-by: Kashyap Desai < kashyap.desai@broadcom.com>
>
> Thanks,
> Ming Lei
>
next prev parent reply other threads:[~2019-06-20 6:17 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-17 12:19 properly communicate queue limits to the DMA layer v2 Christoph Hellwig
2019-06-17 12:19 ` [PATCH 1/8] scsi: add a host / host template field for the virt boundary Christoph Hellwig
2019-06-17 20:51 ` Bart Van Assche
2019-06-18 0:35 ` Ming Lei
2019-06-20 6:17 ` Kashyap Desai [this message]
2019-06-17 12:19 ` [PATCH 2/8] scsi: take the DMA max mapping size into account Christoph Hellwig
2019-06-17 20:56 ` Bart Van Assche
2019-07-22 6:00 ` Ming Lei
2019-07-22 6:18 ` Dexuan-Linux Cui
2019-07-22 7:40 ` Damien Le Moal
2019-06-17 12:19 ` [PATCH 3/8] ufshcd: set max_segment_size in the scsi host template Christoph Hellwig
2019-06-17 20:58 ` Bart Van Assche
2019-06-17 12:19 ` [PATCH 4/8] storvsc: set virt_boundary_mask " Christoph Hellwig
2019-06-17 20:59 ` Bart Van Assche
2019-06-17 12:19 ` [PATCH 5/8] IB/iser: set virt_boundary_mask in the scsi host Christoph Hellwig
2019-06-17 17:34 ` Sagi Grimberg
2019-06-24 22:32 ` Max Gurtovoy
2019-06-17 12:19 ` [PATCH 6/8] IB/srp: " Christoph Hellwig
2019-06-17 17:35 ` Sagi Grimberg
2019-06-17 21:01 ` Bart Van Assche
2019-06-24 22:33 ` Max Gurtovoy
2019-06-17 12:19 ` [PATCH 7/8] mpt3sas: set an unlimited max_segment_size for SAS 3.0 HBAs Christoph Hellwig
2019-06-18 0:46 ` Ming Lei
2019-06-20 7:04 ` Suganath Prabu Subramani
2019-06-20 7:08 ` Suganath Prabu Subramani
2019-06-17 12:20 ` [PATCH 8/8] megaraid_sas: set an unlimited max_segment_size Christoph Hellwig
2019-07-15 16:58 ` properly communicate queue limits to the DMA layer v2 Christoph Hellwig
2019-07-15 17:33 ` Martin K. Petersen
2019-07-15 17:46 ` Christoph Hellwig
2019-07-17 3:07 ` Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6dd62da3ba56142d4a67bc207aa55a59@mail.gmail.com \
--to=kashyap.desai@broadcom.com \
--cc=bvanassche@acm.org \
--cc=hch@lst.de \
--cc=linux-hyperv@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=maxg@mellanox.com \
--cc=megaraidlinux.pdl@broadcom.com \
--cc=mpt-fusionlinux.pdl@broadcom.com \
--cc=sagi@grimberg.me \
--cc=tom.leiming@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).