Linux-HyperV Archive on lore.kernel.org
 help / color / Atom feed
From: Marc Zyngier <maz@kernel.org>
To: Michael Kelley <mikelley@microsoft.com>
Cc: will@kernel.org, ardb@kernel.org, arnd@arndb.de,
	catalin.marinas@arm.com, mark.rutland@arm.com,
	linux-arm-kernel@lists.infradead.org, gregkh@linuxfoundation.org,
	linux-kernel@vger.kernel.org, linux-hyperv@vger.kernel.org,
	linux-efi@vger.kernel.org, linux-arch@vger.kernel.org,
	olaf@aepfle.de, apw@canonical.com, vkuznets@redhat.com,
	jasowang@redhat.com, marcelo.cerri@canonical.com,
	kys@microsoft.com, sunilmut@microsoft.com, boqun.feng@gmail.com
Subject: Re: [PATCH v6 01/10] arm64: hyperv: Add core Hyper-V include files
Date: Sun, 15 Mar 2020 17:31:25 +0000
Message-ID: <86v9n5zfrm.wl-maz@kernel.org> (raw)
In-Reply-To: <1584200119-18594-2-git-send-email-mikelley@microsoft.com>

On Sat, 14 Mar 2020 15:35:10 +0000,
Hi Michael,

Michael Kelley <mikelley@microsoft.com> wrote:
> 
> hyperv-tlfs.h defines Hyper-V interfaces from the Hyper-V Top Level
> Functional Spec (TLFS). The TLFS is distinctly oriented to x86/x64,
> and Hyper-V has not separated out the architecture-dependent parts into
> x86/x64 vs. ARM64. So hyperv-tlfs.h includes information for ARM64
> that is not yet formally published. The TLFS is available here:
> 
>   docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/reference/tlfs
> 
> mshyperv.h defines Linux-specific structures and routines for
> interacting with Hyper-V on ARM64, and #includes the architecture-
> independent part of mshyperv.h in include/asm-generic.
> 
> Signed-off-by: Michael Kelley <mikelley@microsoft.com>
> ---
>  MAINTAINERS                          |   2 +
>  arch/arm64/include/asm/hyperv-tlfs.h | 413 +++++++++++++++++++++++++++++++++++
>  arch/arm64/include/asm/mshyperv.h    | 115 ++++++++++
>  3 files changed, 530 insertions(+)
>  create mode 100644 arch/arm64/include/asm/hyperv-tlfs.h
>  create mode 100644 arch/arm64/include/asm/mshyperv.h

So this is a pretty large patch, mostly containing constants and other
data structures that don't necessarily make sense immediately (or at
least, I can't make sense of it without reading all the other 9
patches and going back to patch #1).

Could you please consider splitting this into more discreet bits that
get added as required by the supporting code?

So here's only a few sparse comments:

> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 58bb5c4..398cfdb 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -7809,6 +7809,8 @@ F:	arch/x86/include/asm/trace/hyperv.h
>  F:	arch/x86/include/asm/hyperv-tlfs.h
>  F:	arch/x86/kernel/cpu/mshyperv.c
>  F:	arch/x86/hyperv
> +F:	arch/arm64/include/asm/hyperv-tlfs.h
> +F:	arch/arm64/include/asm/mshyperv.h
>  F:	drivers/clocksource/hyperv_timer.c
>  F:	drivers/hid/hid-hyperv.c
>  F:	drivers/hv/
> diff --git a/arch/arm64/include/asm/hyperv-tlfs.h b/arch/arm64/include/asm/hyperv-tlfs.h
> new file mode 100644
> index 0000000..5e6a087
> --- /dev/null
> +++ b/arch/arm64/include/asm/hyperv-tlfs.h
> @@ -0,0 +1,413 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +
> +/*
> + * This file contains definitions from the Hyper-V Hypervisor Top-Level
> + * Functional Specification (TLFS):
> + * https://docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/reference/tlfs
> + *
> + * Copyright (C) 2019, Microsoft, Inc.
> + *
> + * Author : Michael Kelley <mikelley@microsoft.com>
> + */
> +
> +#ifndef _ASM_HYPERV_TLFS_H
> +#define _ASM_HYPERV_TLFS_H
> +
> +#include <linux/types.h>
> +
> +/*
> + * All data structures defined in the TLFS that are shared between Hyper-V
> + * and a guest VM use Little Endian byte ordering.  This matches the default
> + * byte ordering of Linux running on ARM64, so no special handling is required.
> + */
> +
> +
> +/*
> + * While not explicitly listed in the TLFS, Hyper-V always runs with a page
> + * size of 4096. These definitions are used when communicating with Hyper-V
> + * using guest physical pages and guest physical page addresses, since the
> + * guest page size may not be 4096 on ARM64.
> + */
> +#define HV_HYP_PAGE_SHIFT	12
> +#define HV_HYP_PAGE_SIZE	(1 << HV_HYP_PAGE_SHIFT)

Probably worth writing this as 1UL to be on the safe side.

> +#define HV_HYP_PAGE_MASK	(~(HV_HYP_PAGE_SIZE - 1))
> +
> +/*
> + * These Hyper-V registers provide information equivalent to the CPUID
> + * instruction on x86/x64.
> + */
> +#define HV_REGISTER_HYPERVISOR_VERSION		0x00000100 /*CPUID 0x40000002 */
> +#define	HV_REGISTER_PRIVILEGES_AND_FEATURES	0x00000200 /*CPUID 0x40000003 */
> +#define	HV_REGISTER_FEATURES			0x00000201 /*CPUID 0x40000004 */
> +#define	HV_REGISTER_IMPLEMENTATION_LIMITS	0x00000202 /*CPUID 0x40000005 */
> +#define HV_ARM64_REGISTER_INTERFACE_VERSION	0x00090006 /*CPUID 0x40000001 */
> +
> +/*
> + * Feature identification. HvRegisterPrivilegesAndFeaturesInfo returns a
> + * 128-bit value with flags indicating which features are available to the
> + * partition based upon the current partition privileges. The 128-bit
> + * value is broken up with different portions stored in different 32-bit
> + * fields in the ms_hyperv structure.
> + */
> +
> +/* Partition Reference Counter available*/
> +#define HV_MSR_TIME_REF_COUNT_AVAILABLE		BIT(1)
> +
> +/* Synthetic Timers available */
> +#define HV_MSR_SYNTIMER_AVAILABLE		BIT(3)
> +
> +/* Reference TSC available */
> +#define HV_MSR_REFERENCE_TSC_AVAILABLE		BIT(9)
> +
> +
> +/*
> + * This group of flags is in the high order 64-bits of the returned
> + * 128-bit value. Note that this set of bit positions differs from what
> + * is used on x86/x64 architecture.
> + */
> +
> +/* Crash MSRs available */
> +#define HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE	BIT(8)

It is confusing that you don't have a single bit space for all these
flags. It'd probably help if you had a structure describing this
128bit value in multiple 32bit or 64bit words, and indicating which
field the bit position is relevant to.

[...]

> +/* Define the hypercall status result */
> +
> +union hv_hypercall_status {
> +	u64 as_uint64;

nit: it'd be more consistent if as_uint64 was actually a uint64 type.

> +	struct {
> +		u16 status;
> +		u16 reserved;
> +		u16 reps_completed;  /* Low 12 bits */
> +		u16 reserved2;
> +	};
> +};
> +
> +/* hypercall status code */
> +#define HV_STATUS_SUCCESS			0
> +#define HV_STATUS_INVALID_HYPERCALL_CODE	2
> +#define HV_STATUS_INVALID_HYPERCALL_INPUT	3
> +#define HV_STATUS_INVALID_ALIGNMENT		4
> +#define HV_STATUS_INSUFFICIENT_MEMORY		11
> +#define HV_STATUS_INVALID_CONNECTION_ID		18
> +#define HV_STATUS_INSUFFICIENT_BUFFERS		19
> +
> +/* Define input and output layout for Get VP Register hypercall */
> +struct hv_get_vp_register_input {
> +	u64 partitionid;
> +	u32 vpindex;
> +	u8  inputvtl;
> +	u8  padding[3];
> +	u32 name0;
> +	u32 name1;
> +} __packed;
> +
> +struct hv_get_vp_register_output {
> +	u64 registervaluelow;
> +	u64 registervaluehigh;
> +} __packed;
> +
> +#define HV_FLUSH_ALL_PROCESSORS			BIT(0)
> +#define HV_FLUSH_ALL_VIRTUAL_ADDRESS_SPACES	BIT(1)
> +#define HV_FLUSH_NON_GLOBAL_MAPPINGS_ONLY	BIT(2)

I"m curious: Are these supposed to be PV'd TLB invalidation
operations?

> +#define HV_FLUSH_USE_EXTENDED_RANGE_FORMAT	BIT(3)
> +
> +enum HV_GENERIC_SET_FORMAT {
> +	HV_GENERIC_SET_SPARSE_4K,
> +	HV_GENERIC_SET_ALL,
> +};
> +
> +/*
> + * The Hyper-V TimeRefCount register and the TSC
> + * page provide a guest VM clock with 100ns tick rate
> + */
> +#define HV_CLOCK_HZ (NSEC_PER_SEC/100)
> +
> +/*
> + * The fields in this structure are set by Hyper-V and read
> + * by the Linux guest.  They should be accessed with READ_ONCE()
> + * so the compiler doesn't optimize in a way that will cause
> + * problems.  The union pads the size out to the page size
> + * used to communicate with Hyper-V.
> + */
> +struct ms_hyperv_tsc_page {
> +	union {
> +		struct {
> +			u32 tsc_sequence;
> +			u32 reserved1;
> +			u64 tsc_scale;
> +			s64 tsc_offset;
> +		} __packed;
> +		u8 reserved2[HV_HYP_PAGE_SIZE];
> +	};
> +};
> +
> +/* Define the number of synthetic interrupt sources. */
> +#define HV_SYNIC_SINT_COUNT		(16)
> +/* Define the expected SynIC version. */
> +#define HV_SYNIC_VERSION_1		(0x1)
> +
> +#define HV_SYNIC_CONTROL_ENABLE		(1ULL << 0)
> +#define HV_SYNIC_SIMP_ENABLE		(1ULL << 0)
> +#define HV_SYNIC_SIEFP_ENABLE		(1ULL << 0)
> +#define HV_SYNIC_SINT_MASKED		(1ULL << 16)
> +#define HV_SYNIC_SINT_AUTO_EOI		(1ULL << 17)
> +#define HV_SYNIC_SINT_VECTOR_MASK	(0xFF)

Let's me guess: a PV interrupt controller? Do you really need this?
Specially as I don't see any PV irqchip driver in this submission...

[...]

> diff --git a/arch/arm64/include/asm/mshyperv.h b/arch/arm64/include/asm/mshyperv.h
> new file mode 100644
> index 0000000..60b3f68
> --- /dev/null
> +++ b/arch/arm64/include/asm/mshyperv.h
> @@ -0,0 +1,115 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +
> +/*
> + * Linux-specific definitions for managing interactions with Microsoft's
> + * Hyper-V hypervisor. The definitions in this file are specific to
> + * the ARM64 architecture.  See include/asm-generic/mshyperv.h for
> + * definitions are that architecture independent.
> + *
> + * Definitions that are specified in the Hyper-V Top Level Functional
> + * Spec (TLFS) should not go in this file, but should instead go in
> + * hyperv-tlfs.h.
> + *
> + * Copyright (C) 2019, Microsoft, Inc.
> + *
> + * Author : Michael Kelley <mikelley@microsoft.com>
> + */
> +
> +#ifndef _ASM_MSHYPERV_H
> +#define _ASM_MSHYPERV_H
> +
> +#include <linux/types.h>
> +#include <linux/interrupt.h>
> +#include <linux/clocksource.h>
> +#include <linux/irq.h>
> +#include <linux/irqdesc.h>
> +#include <linux/arm-smccc.h>
> +#include <asm/hyperv-tlfs.h>
> +
> +/*
> + * Define the IRQ numbers/vectors used by Hyper-V VMbus interrupts
> + * and by STIMER0 Direct Mode interrupts. Hyper-V should be supplying
> + * these values through ACPI, but there are no other interrupting
> + * devices in a Hyper-V VM on ARM64, so it's OK to hard code for now.

I'm not convinced it is OK. If you don't try to do the right thing
now, what is the incentive to do it later? Starting to hard code
things is akin to going back to the ARM board files of old. Been
there, managed to fix it, not going back to it again anytime soon.

> + * The "CALLBACK_VECTOR" terminology is a left-over from the x86/x64
> + * world that is used in architecture independent Hyper-V code.
> + */
> +#define HYPERVISOR_CALLBACK_VECTOR 16
> +#define	HV_STIMER0_IRQNR	   17
> +
> +extern u64 hv_do_hvc(u64 control, ...);
> +extern u64 hv_do_hvc_fast_get(u64 control, u64 input1, u64 input2, u64 input3,
> +		struct hv_get_vp_register_output *output);
> +
> +/*
> + * Declare calls to get and set Hyper-V VP register values on ARM64, which
> + * requires a hypercall.
> + */
> +extern void hv_set_vpreg(u32 reg, u64 value);
> +extern u64 hv_get_vpreg(u32 reg);
> +extern void hv_get_vpreg_128(u32 reg, struct hv_get_vp_register_output *result);
> +
> +/*
> + * Use the Hyper-V provided stimer0 as the timer that is made
> + * available to the architecture independent Hyper-V drivers.
> + */
> +#define hv_init_timer(timer, tick) \
> +		hv_set_vpreg(HV_REGISTER_STIMER0_COUNT + (2*timer), tick)
> +#define hv_init_timer_config(timer, val) \
> +		hv_set_vpreg(HV_REGISTER_STIMER0_CONFIG + (2*timer), val)
> +#define hv_get_current_tick(tick) \
> +		(tick = hv_get_vpreg(HV_REGISTER_TIME_REFCOUNT))
> +
> +#define hv_get_simp(val) (val = hv_get_vpreg(HV_REGISTER_SIPP))
> +#define hv_set_simp(val) hv_set_vpreg(HV_REGISTER_SIPP, val)
> +
> +#define hv_get_siefp(val) (val = hv_get_vpreg(HV_REGISTER_SIFP))
> +#define hv_set_siefp(val) hv_set_vpreg(HV_REGISTER_SIFP, val)
> +
> +#define hv_get_synic_state(val) (val = hv_get_vpreg(HV_REGISTER_SCONTROL))
> +#define hv_set_synic_state(val) hv_set_vpreg(HV_REGISTER_SCONTROL, val)
> +
> +#define hv_get_vp_index(index) (index = hv_get_vpreg(HV_REGISTER_VPINDEX))
> +
> +#define hv_signal_eom()	hv_set_vpreg(HV_REGISTER_EOM, 0)
> +
> +/*
> + * Hyper-V SINT registers are numbered sequentially, so we can just
> + * add the SINT number to the register number of SINT0
> + */
> +#define hv_get_synint_state(sint_num, val) \
> +		(val = hv_get_vpreg(HV_REGISTER_SINT0 + sint_num))
> +#define hv_set_synint_state(sint_num, val) \
> +		hv_set_vpreg(HV_REGISTER_SINT0 + sint_num, val)
> +
> +#define hv_get_crash_ctl(val) \
> +		(val = hv_get_vpreg(HV_REGISTER_CRASH_CTL))
> +#define hv_get_time_ref_count(val) \
> +		(val = hv_get_vpreg(HV_REGISTER_TIME_REFCOUNT))
> +#define hv_get_reference_tsc(val) \
> +		(val = hv_get_vpreg(HV_REGISTER_REFERENCE_TSC))
> +#define hv_set_reference_tsc(val) \
> +		hv_set_vpreg(HV_REGISTER_REFERENCE_TSC, val)
> +#define hv_enable_vdso_clocksource()
> +#define hv_set_clocksource_vdso(val) \
> +		((val).vdso_clock_mode = VDSO_CLOCKMODE_NONE)
> +
> +#if IS_ENABLED(CONFIG_HYPERV)

I don't think this guards anything useful.

> +#define hv_enable_stimer0_percpu_irq(irq)	enable_percpu_irq(irq, 0)
> +#define hv_disable_stimer0_percpu_irq(irq)	disable_percpu_irq(irq)

and this looks pretty premature.

> +#endif
> +
> +/* ARM64 specific code to read the hardware clock */
> +#define hv_get_raw_timer() arch_timer_read_counter()
> +
> +/* SMCCC hypercall parameters */
> +#define HV_SMCCC_FUNC_NUMBER	1
> +#define HV_FUNC_ID	ARM_SMCCC_CALL_VAL(			\
> +				ARM_SMCCC_STD_CALL,		\
> +				ARM_SMCCC_SMC_64,		\
> +				ARM_SMCCC_OWNER_VENDOR_HYP,	\

This is only defined in patch #2...

> +				HV_SMCCC_FUNC_NUMBER)
> +
> +#include <asm-generic/mshyperv.h>
> +
> +#endif

Thanks,

	M.

-- 
Jazz is not dead, it just smells funny.

  reply index

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-14 15:35 [PATCH v6 00/10] Subject: Enable Linux guests on Hyper-V on ARM64 Michael Kelley
2020-03-14 15:35 ` [PATCH v6 01/10] arm64: hyperv: Add core Hyper-V include files Michael Kelley
2020-03-15 17:31   ` Marc Zyngier [this message]
2020-03-18  0:10     ` Michael Kelley
2020-03-16  8:47   ` Arnd Bergmann
2020-03-18  0:12     ` Michael Kelley
2020-03-18 10:10       ` Arnd Bergmann
2020-03-19 21:31         ` Michael Kelley
2020-03-20 16:38           ` Arnd Bergmann
2020-03-14 15:35 ` [PATCH v6 02/10] arm/arm64: smccc-1.1: Add vendor specific owner definition Michael Kelley
2020-03-14 15:35 ` [PATCH v6 03/10] arm64: hyperv: Add hypercall and register access functions Michael Kelley
2020-03-14 15:35 ` [PATCH v6 04/10] arm64: hyperv: Add memory alloc/free functions for Hyper-V size pages Michael Kelley
2020-03-16  8:22   ` Arnd Bergmann
2020-03-16  8:30     ` gregkh
2020-03-16  8:30     ` Marc Zyngier
2020-03-16  8:32       ` Arnd Bergmann
2020-03-18  0:15         ` Michael Kelley
2020-03-18  9:57           ` Arnd Bergmann
2020-03-19 21:43             ` Michael Kelley
2020-03-20 16:28               ` Arnd Bergmann
2020-03-20 17:22                 ` Michael Kelley
2020-03-14 15:35 ` [PATCH v6 05/10] arm64: hyperv: Add interrupt handlers for VMbus and stimer Michael Kelley
2020-03-16  8:25   ` Arnd Bergmann
2020-03-18  0:16     ` Michael Kelley
2020-03-18  9:52       ` Arnd Bergmann
2020-03-14 15:35 ` [PATCH v6 06/10] arm64: hyperv: Add kexec and panic handlers Michael Kelley
2020-03-15 18:15   ` Marc Zyngier
2020-03-18  0:17     ` Michael Kelley
2020-03-14 15:35 ` [PATCH v6 07/10] arm64: hyperv: Initialize hypervisor on boot Michael Kelley
2020-03-16  8:29   ` Arnd Bergmann
2020-03-18  0:17     ` Michael Kelley
2020-03-18  9:44       ` Arnd Bergmann
2020-03-14 15:35 ` [PATCH v6 08/10] Drivers: hv: vmbus: Add hooks for per-CPU IRQ Michael Kelley
2020-03-14 15:35 ` [PATCH v6 09/10] arm64: efi: Export screen_info Michael Kelley
2020-03-16  8:20   ` Arnd Bergmann
2020-03-18  0:18     ` Michael Kelley
2020-03-18  9:26       ` Arnd Bergmann
2020-03-19 21:46         ` Michael Kelley
2020-05-13 14:26           ` Nikhil Mahale
2020-05-18  4:25             ` Nikhil Mahale
2020-05-18 12:51               ` Ard Biesheuvel
2020-05-22 11:14                 ` Nikhil Mahale
2020-05-22 11:32                   ` Ard Biesheuvel
2020-03-14 15:35 ` [PATCH v6 10/10] Drivers: hv: Enable Hyper-V code to be built on ARM64 Michael Kelley
     [not found] ` <20200318031130.5476-1-hdanton@sina.com>
2020-03-19 21:04   ` [PATCH v6 03/10] arm64: hyperv: Add hypercall and register access functions Michael Kelley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=86v9n5zfrm.wl-maz@kernel.org \
    --to=maz@kernel.org \
    --cc=apw@canonical.com \
    --cc=ardb@kernel.org \
    --cc=arnd@arndb.de \
    --cc=boqun.feng@gmail.com \
    --cc=catalin.marinas@arm.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jasowang@redhat.com \
    --cc=kys@microsoft.com \
    --cc=linux-arch@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-efi@vger.kernel.org \
    --cc=linux-hyperv@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcelo.cerri@canonical.com \
    --cc=mark.rutland@arm.com \
    --cc=mikelley@microsoft.com \
    --cc=olaf@aepfle.de \
    --cc=sunilmut@microsoft.com \
    --cc=vkuznets@redhat.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-HyperV Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-hyperv/0 linux-hyperv/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-hyperv linux-hyperv/ https://lore.kernel.org/linux-hyperv \
		linux-hyperv@vger.kernel.org
	public-inbox-index linux-hyperv

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-hyperv


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git