From: minyard@acm.org
To: Wolfram Sang <wsa@the-dreams.de>,
linux-i2c@vger.kernel.org, Jean Delvare <jdelvare@suse.de>
Cc: minyard@acm.org, Corey Minyard <cminyard@mvista.com>
Subject: [PATCH v2 1/3] i2c: Add parameters to sysfs-added i2c devices
Date: Tue, 10 May 2016 11:11:37 -0500 [thread overview]
Message-ID: <1462896699-1627-2-git-send-email-minyard@acm.org> (raw)
In-Reply-To: <1462896699-1627-1-git-send-email-minyard@acm.org>
From: Corey Minyard <cminyard@mvista.com>
Some devices might need parameters to control their operation,
add the ability to pass these parameters to the client.
This also makes the parsing of sysfs-added I2C devices a little
more flexible, allowing tabs and arbitrary numbers of spaces.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
---
drivers/i2c/i2c-core.c | 43 +++++++++++++++++++++++++++++++------------
include/linux/i2c.h | 3 +++
2 files changed, 34 insertions(+), 12 deletions(-)
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index e584d88..069c385 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -51,6 +51,7 @@
#include <linux/pm_domain.h>
#include <linux/pm_runtime.h>
#include <linux/pm_wakeirq.h>
+#include <linux/ctype.h>
#include <linux/property.h>
#include <linux/rwsem.h>
#include <linux/slab.h>
@@ -780,7 +781,10 @@ static void i2c_device_shutdown(struct device *dev)
static void i2c_client_dev_release(struct device *dev)
{
- kfree(to_i2c_client(dev));
+ struct i2c_client *client = to_i2c_client(dev);
+
+ kfree(client->parms);
+ kfree(client);
}
static ssize_t
@@ -1047,6 +1051,13 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
client->flags = info->flags;
client->addr = info->addr;
client->irq = info->irq;
+ if (info->parms) {
+ client->parms = kstrdup(info->parms, GFP_KERNEL);
+ if (!client->parms) {
+ dev_err(&adap->dev, "Out of memory allocating parms\n");
+ goto out_err_silent;
+ }
+ }
strlcpy(client->name, info->type, sizeof(client->name));
@@ -1196,31 +1207,39 @@ i2c_sysfs_new_device(struct device *dev, struct device_attribute *attr,
struct i2c_adapter *adap = to_i2c_adapter(dev);
struct i2c_board_info info;
struct i2c_client *client;
- char *blank, end;
+ char *pos, end;
int res;
memset(&info, 0, sizeof(struct i2c_board_info));
- blank = strchr(buf, ' ');
- if (!blank) {
+ pos = strpbrk(buf, " \t");
+ if (!pos) {
dev_err(dev, "%s: Missing parameters\n", "new_device");
return -EINVAL;
}
- if (blank - buf > I2C_NAME_SIZE - 1) {
+ if (pos - buf > I2C_NAME_SIZE - 1) {
dev_err(dev, "%s: Invalid device name\n", "new_device");
return -EINVAL;
}
- memcpy(info.type, buf, blank - buf);
+ memcpy(info.type, buf, pos - buf);
- /* Parse remaining parameters, reject extra parameters */
- res = sscanf(++blank, "%hi%c", &info.addr, &end);
- if (res < 1) {
+ while (isspace(*pos))
+ pos++;
+
+ /* Parse address, saving remaining parameters. */
+ res = sscanf(pos, "%hi%c", &info.addr, &end);
+ if (res < 1 || (res > 1 && !isspace(end))) {
dev_err(dev, "%s: Can't parse I2C address\n", "new_device");
return -EINVAL;
}
- if (res > 1 && end != '\n') {
- dev_err(dev, "%s: Extra parameters\n", "new_device");
- return -EINVAL;
+ if (res > 1) {
+ /* Extra parms, skip the address and space. */
+ while (!isspace(*pos))
+ pos++;
+ while (isspace(*pos))
+ pos++;
+ if (*pos)
+ info.parms = pos;
}
if ((info.addr & I2C_ADDR_OFFSET_TEN_BIT) == I2C_ADDR_OFFSET_TEN_BIT) {
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 200cf13b..35db0dd 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -225,6 +225,7 @@ struct i2c_client {
char name[I2C_NAME_SIZE];
struct i2c_adapter *adapter; /* the adapter we sit on */
struct device dev; /* the device structure */
+ char *parms; /* sysfs extra parms */
int irq; /* irq issued by device */
struct list_head detected;
#if IS_ENABLED(CONFIG_I2C_SLAVE)
@@ -282,6 +283,7 @@ static inline int i2c_slave_event(struct i2c_client *client,
* @archdata: copied into i2c_client.dev.archdata
* @of_node: pointer to OpenFirmware device node
* @fwnode: device node supplied by the platform firmware
+ * @parms: Parameters supplied on the sysfs command line
* @irq: stored in i2c_client.irq
*
* I2C doesn't actually support hardware probing, although controllers and
@@ -303,6 +305,7 @@ struct i2c_board_info {
struct dev_archdata *archdata;
struct device_node *of_node;
struct fwnode_handle *fwnode;
+ char *parms;
int irq;
};
--
2.7.4
next prev parent reply other threads:[~2016-05-10 16:11 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-10 16:11 [PATCH v2 0/3] Add parameters for sysfs added I2C devices minyard
2016-05-10 16:11 ` minyard [this message]
2016-05-11 17:23 ` [PATCH v2 1/3] i2c: Add parameters to sysfs-added i2c devices Naveen Kaje
2021-06-25 14:14 ` Wolfram Sang
2016-05-10 16:11 ` [PATCH v2 2/3] i2c-smbus: Allow parms to be passed in from sysfs new_device minyard
2016-05-11 17:26 ` Naveen Kaje
2016-05-10 16:11 ` [PATCH v2 3/3] ipmi: Handle I2C parms in the SSIF driver minyard
2016-05-11 17:26 ` Naveen Kaje
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1462896699-1627-2-git-send-email-minyard@acm.org \
--to=minyard@acm.org \
--cc=cminyard@mvista.com \
--cc=jdelvare@suse.de \
--cc=linux-i2c@vger.kernel.org \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).