Linux-i2c Archive on lore.kernel.org
 help / color / Atom feed
From: Serge Semin <Sergey.Semin@baikalelectronics.ru>
To: Jarkko Nikula <jarkko.nikula@linux.intel.com>,
	Wolfram Sang <wsa@the-dreams.de>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru>,
	Serge Semin <fancer.lancer@gmail.com>,
	Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>,
	Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
	Rob Herring <robh+dt@kernel.org>, <linux-mips@vger.kernel.org>,
	<devicetree@vger.kernel.org>, <linux-i2c@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>
Subject: [PATCH v3 08/12] i2c: designware: Discard Cherry Trail model flag
Date: Wed, 27 May 2020 00:55:24 +0300
Message-ID: <20200526215528.16417-9-Sergey.Semin@baikalelectronics.ru> (raw)
In-Reply-To: <20200526215528.16417-1-Sergey.Semin@baikalelectronics.ru>

A PM workaround activated by the flag MODEL_CHERRYTRAIL has been removed
since commit 9cbeeca05049 ("i2c: designware: Remove Cherry Trail PMIC I2C
bus pm_disabled workaround"), but the flag most likely by mistake has been
left in the Dw I2C drivers. Lets remove it.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org

---

Changelog v3:
- Since MSCC and Baikal-T1 will be a part of the platform driver code, we
  have to preserve the MODEL_MASK macro to use it to filter the model
  flags during the IP-specific quirks activation.
---
 drivers/i2c/busses/i2c-designware-core.h    | 3 +--
 drivers/i2c/busses/i2c-designware-pcidrv.c  | 1 -
 drivers/i2c/busses/i2c-designware-platdrv.c | 2 +-
 3 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index b220ad64c38d..e036e7268d3b 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -281,8 +281,7 @@ struct dw_i2c_dev {
 #define ACCESS_INTR_MASK	0x00000004
 #define ACCESS_NO_IRQ_SUSPEND	0x00000008
 
-#define MODEL_CHERRYTRAIL	0x00000100
-#define MODEL_MSCC_OCELOT	0x00000200
+#define MODEL_MSCC_OCELOT	0x00000100
 #define MODEL_MASK		0x00000f00
 
 u32 dw_readl(struct dw_i2c_dev *dev, int offset);
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 7a0b65b5b5b5..76357b575aa5 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -166,7 +166,6 @@ static struct dw_pci_controller dw_pci_controllers[] = {
 		.tx_fifo_depth = 32,
 		.rx_fifo_depth = 32,
 		.functionality = I2C_FUNC_10BIT_ADDR,
-		.flags = MODEL_CHERRYTRAIL,
 		.scl_sda_cfg = &byt_config,
 	},
 	[elkhartlake] = {
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 5536673060cc..57475f19448a 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -123,7 +123,7 @@ static const struct acpi_device_id dw_i2c_acpi_match[] = {
 	{ "INT3432", 0 },
 	{ "INT3433", 0 },
 	{ "80860F41", ACCESS_NO_IRQ_SUSPEND },
-	{ "808622C1", ACCESS_NO_IRQ_SUSPEND | MODEL_CHERRYTRAIL },
+	{ "808622C1", ACCESS_NO_IRQ_SUSPEND },
 	{ "AMD0010", ACCESS_INTR_MASK },
 	{ "AMDI0010", ACCESS_INTR_MASK },
 	{ "AMDI0510", 0 },
-- 
2.26.2


  parent reply index

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-26 21:55 [PATCH v3 00/12] i2c: designeware: Add Baikal-T1 System I2C support Serge Semin
2020-05-26 21:55 ` [PATCH v3 01/12] scripts/dtc: check: Add 10bit/slave i2c reg flags support Serge Semin
2020-05-27  1:17   ` Rob Herring
2020-05-27  9:46     ` Serge Semin
2020-05-27 11:20     ` Serge Semin
2020-05-26 21:55 ` [PATCH v3 02/12] dt-bindings: i2c: Convert DW I2C binding to DT schema Serge Semin
2020-05-27  1:20   ` Rob Herring
2020-05-26 21:55 ` [PATCH v3 03/12] dt-bindings: i2c: Discard i2c-slave flag from the DW I2C example Serge Semin
2020-05-27  9:30   ` Andy Shevchenko
2020-05-27 12:07     ` Serge Semin
2020-05-27 13:32       ` Andy Shevchenko
2020-05-26 21:55 ` [PATCH v3 04/12] dt-bindings: i2c: dw: Add Baikal-T1 SoC I2C controller Serge Semin
2020-05-26 21:55 ` [PATCH v3 05/12] i2c: designware: Use `-y` to build multi-object modules Serge Semin
2020-05-26 21:55 ` [PATCH v3 06/12] i2c: designware: slave: Set DW I2C core module dependency Serge Semin
2020-05-26 21:55 ` [PATCH v3 07/12] i2c: designware: Add Baytrail sem config DW I2C platform dependency Serge Semin
2020-05-26 21:55 ` Serge Semin [this message]
2020-05-26 21:55 ` [PATCH v3 09/12] i2c: designware: Convert driver to using regmap API Serge Semin
2020-05-26 21:55 ` [PATCH v3 10/12] i2c: designware: Retrieve quirk flags as early as possible Serge Semin
2020-05-26 21:55 ` [PATCH v3 11/12] i2c: designware: Move reg-space remapping into a dedicated function Serge Semin
2020-05-27  9:26   ` Andy Shevchenko
2020-05-27  9:50     ` Serge Semin
2020-05-27 10:18       ` Andy Shevchenko
2020-05-26 21:55 ` [PATCH v3 12/12] i2c: designware: Add Baikal-T1 System I2C support Serge Semin
2020-05-27 13:30 ` [PATCH v3 00/12] i2c: designeware: " Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200526215528.16417-9-Sergey.Semin@baikalelectronics.ru \
    --to=sergey.semin@baikalelectronics.ru \
    --cc=Alexey.Malahov@baikalelectronics.ru \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=fancer.lancer@gmail.com \
    --cc=jarkko.nikula@linux.intel.com \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=mika.westerberg@linux.intel.com \
    --cc=robh+dt@kernel.org \
    --cc=tsbogend@alpha.franken.de \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-i2c Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-i2c/0 linux-i2c/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-i2c linux-i2c/ https://lore.kernel.org/linux-i2c \
		linux-i2c@vger.kernel.org
	public-inbox-index linux-i2c

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-i2c


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git