Linux-i2c Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v2 0/2] i2c: fsi: Fixes for systems with more ports
@ 2020-06-09 20:15 Eddie James
  2020-06-09 20:15 ` [PATCH v2 1/2] i2c: fsi: Fix the port number field in status register Eddie James
                   ` (2 more replies)
  0 siblings, 3 replies; 9+ messages in thread
From: Eddie James @ 2020-06-09 20:15 UTC (permalink / raw)
  To: linux-i2c; +Cc: linux-kernel, andy.shevchenko, wsa, joel, eajames

This series fixes a register definition for the FSI-attached I2C master to
allow all the available ports. In addition, the code to add an adapter for
each port is modified to require a device-tree entry for the bus. This is so
that systems with lots of busses that have no devices on them don't add lots
of unecessary devices.

Changes since v1:
 - Remove the check for null device node since that is checked in
   of_device_is_available

Eddie James (2):
  i2c: fsi: Fix the port number field in status register
  i2c: fsi: Prevent adding adapters for ports without dts nodes

 drivers/i2c/busses/i2c-fsi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

-- 
2.24.0


^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, back to index

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-09 20:15 [PATCH v2 0/2] i2c: fsi: Fixes for systems with more ports Eddie James
2020-06-09 20:15 ` [PATCH v2 1/2] i2c: fsi: Fix the port number field in status register Eddie James
2020-06-25 22:26   ` Wolfram Sang
2020-06-09 20:15 ` [PATCH v2 2/2] i2c: fsi: Prevent adding adapters for ports without dts nodes Eddie James
2020-07-04  6:39   ` Wolfram Sang
2020-07-06 13:53     ` Eddie James
2020-07-06 14:01       ` Wolfram Sang
2020-07-24 19:32   ` Wolfram Sang
2020-06-09 22:00 ` [PATCH v2 0/2] i2c: fsi: Fixes for systems with more ports Andy Shevchenko

Linux-i2c Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-i2c/0 linux-i2c/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-i2c linux-i2c/ https://lore.kernel.org/linux-i2c \
		linux-i2c@vger.kernel.org
	public-inbox-index linux-i2c

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-i2c


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git