* [PATCH v2 0/2] i2c: fsi: Fixes for systems with more ports
@ 2020-06-09 20:15 Eddie James
2020-06-09 20:15 ` [PATCH v2 1/2] i2c: fsi: Fix the port number field in status register Eddie James
` (2 more replies)
0 siblings, 3 replies; 9+ messages in thread
From: Eddie James @ 2020-06-09 20:15 UTC (permalink / raw)
To: linux-i2c; +Cc: linux-kernel, andy.shevchenko, wsa, joel, eajames
This series fixes a register definition for the FSI-attached I2C master to
allow all the available ports. In addition, the code to add an adapter for
each port is modified to require a device-tree entry for the bus. This is so
that systems with lots of busses that have no devices on them don't add lots
of unecessary devices.
Changes since v1:
- Remove the check for null device node since that is checked in
of_device_is_available
Eddie James (2):
i2c: fsi: Fix the port number field in status register
i2c: fsi: Prevent adding adapters for ports without dts nodes
drivers/i2c/busses/i2c-fsi.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--
2.24.0
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v2 1/2] i2c: fsi: Fix the port number field in status register
2020-06-09 20:15 [PATCH v2 0/2] i2c: fsi: Fixes for systems with more ports Eddie James
@ 2020-06-09 20:15 ` Eddie James
2020-06-25 22:26 ` Wolfram Sang
2020-06-09 20:15 ` [PATCH v2 2/2] i2c: fsi: Prevent adding adapters for ports without dts nodes Eddie James
2020-06-09 22:00 ` [PATCH v2 0/2] i2c: fsi: Fixes for systems with more ports Andy Shevchenko
2 siblings, 1 reply; 9+ messages in thread
From: Eddie James @ 2020-06-09 20:15 UTC (permalink / raw)
To: linux-i2c; +Cc: linux-kernel, andy.shevchenko, wsa, joel, eajames
The port number field in the status register was not correct, so fix it.
Fixes: d6ffb6300116 ("i2c: Add FSI-attached I2C master algorithm")
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
drivers/i2c/busses/i2c-fsi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-fsi.c b/drivers/i2c/busses/i2c-fsi.c
index e0c256922d4f..977d6f524649 100644
--- a/drivers/i2c/busses/i2c-fsi.c
+++ b/drivers/i2c/busses/i2c-fsi.c
@@ -98,7 +98,7 @@
#define I2C_STAT_DAT_REQ BIT(25)
#define I2C_STAT_CMD_COMP BIT(24)
#define I2C_STAT_STOP_ERR BIT(23)
-#define I2C_STAT_MAX_PORT GENMASK(19, 16)
+#define I2C_STAT_MAX_PORT GENMASK(22, 16)
#define I2C_STAT_ANY_INT BIT(15)
#define I2C_STAT_SCL_IN BIT(11)
#define I2C_STAT_SDA_IN BIT(10)
--
2.24.0
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v2 2/2] i2c: fsi: Prevent adding adapters for ports without dts nodes
2020-06-09 20:15 [PATCH v2 0/2] i2c: fsi: Fixes for systems with more ports Eddie James
2020-06-09 20:15 ` [PATCH v2 1/2] i2c: fsi: Fix the port number field in status register Eddie James
@ 2020-06-09 20:15 ` Eddie James
2020-07-04 6:39 ` Wolfram Sang
2020-07-24 19:32 ` Wolfram Sang
2020-06-09 22:00 ` [PATCH v2 0/2] i2c: fsi: Fixes for systems with more ports Andy Shevchenko
2 siblings, 2 replies; 9+ messages in thread
From: Eddie James @ 2020-06-09 20:15 UTC (permalink / raw)
To: linux-i2c; +Cc: linux-kernel, andy.shevchenko, wsa, joel, eajames
Ports should be defined in the devicetree if they are to be enabled on
the system.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
Changes since v1:
- Remove the check for null device node since that is checked in
of_device_is_available
drivers/i2c/busses/i2c-fsi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-fsi.c b/drivers/i2c/busses/i2c-fsi.c
index 977d6f524649..10332693edf0 100644
--- a/drivers/i2c/busses/i2c-fsi.c
+++ b/drivers/i2c/busses/i2c-fsi.c
@@ -703,7 +703,7 @@ static int fsi_i2c_probe(struct device *dev)
for (port_no = 0; port_no < ports; port_no++) {
np = fsi_i2c_find_port_of_node(dev->of_node, port_no);
- if (np && !of_device_is_available(np))
+ if (!of_device_is_available(np))
continue;
port = kzalloc(sizeof(*port), GFP_KERNEL);
--
2.24.0
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH v2 0/2] i2c: fsi: Fixes for systems with more ports
2020-06-09 20:15 [PATCH v2 0/2] i2c: fsi: Fixes for systems with more ports Eddie James
2020-06-09 20:15 ` [PATCH v2 1/2] i2c: fsi: Fix the port number field in status register Eddie James
2020-06-09 20:15 ` [PATCH v2 2/2] i2c: fsi: Prevent adding adapters for ports without dts nodes Eddie James
@ 2020-06-09 22:00 ` Andy Shevchenko
2 siblings, 0 replies; 9+ messages in thread
From: Andy Shevchenko @ 2020-06-09 22:00 UTC (permalink / raw)
To: Eddie James; +Cc: linux-i2c, Linux Kernel Mailing List, wsa, Joel Stanley
On Tue, Jun 9, 2020 at 11:15 PM Eddie James <eajames@linux.ibm.com> wrote:
>
> This series fixes a register definition for the FSI-attached I2C master to
> allow all the available ports. In addition, the code to add an adapter for
> each port is modified to require a device-tree entry for the bus. This is so
> that systems with lots of busses that have no devices on them don't add lots
> of unecessary devices.
>
FWIW,
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> Changes since v1:
> - Remove the check for null device node since that is checked in
> of_device_is_available
>
> Eddie James (2):
> i2c: fsi: Fix the port number field in status register
> i2c: fsi: Prevent adding adapters for ports without dts nodes
>
> drivers/i2c/busses/i2c-fsi.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> --
> 2.24.0
>
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v2 1/2] i2c: fsi: Fix the port number field in status register
2020-06-09 20:15 ` [PATCH v2 1/2] i2c: fsi: Fix the port number field in status register Eddie James
@ 2020-06-25 22:26 ` Wolfram Sang
0 siblings, 0 replies; 9+ messages in thread
From: Wolfram Sang @ 2020-06-25 22:26 UTC (permalink / raw)
To: Eddie James; +Cc: linux-i2c, linux-kernel, andy.shevchenko, joel
[-- Attachment #1: Type: text/plain, Size: 351 bytes --]
On Tue, Jun 09, 2020 at 03:15:54PM -0500, Eddie James wrote:
> The port number field in the status register was not correct, so fix it.
>
> Fixes: d6ffb6300116 ("i2c: Add FSI-attached I2C master algorithm")
> Signed-off-by: Eddie James <eajames@linux.ibm.com>
> Signed-off-by: Joel Stanley <joel@jms.id.au>
Applied to for-current, thanks!
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v2 2/2] i2c: fsi: Prevent adding adapters for ports without dts nodes
2020-06-09 20:15 ` [PATCH v2 2/2] i2c: fsi: Prevent adding adapters for ports without dts nodes Eddie James
@ 2020-07-04 6:39 ` Wolfram Sang
2020-07-06 13:53 ` Eddie James
2020-07-24 19:32 ` Wolfram Sang
1 sibling, 1 reply; 9+ messages in thread
From: Wolfram Sang @ 2020-07-04 6:39 UTC (permalink / raw)
To: Eddie James; +Cc: linux-i2c, linux-kernel, andy.shevchenko, joel
[-- Attachment #1: Type: text/plain, Size: 1172 bytes --]
On Tue, Jun 09, 2020 at 03:15:55PM -0500, Eddie James wrote:
> Ports should be defined in the devicetree if they are to be enabled on
> the system.
The patch description does not really fit anymore, does it? There is no
change in behaviour, we just remove a redundant check.
>
> Signed-off-by: Eddie James <eajames@linux.ibm.com>
> Signed-off-by: Joel Stanley <joel@jms.id.au>
> ---
> Changes since v1:
> - Remove the check for null device node since that is checked in
> of_device_is_available
>
> drivers/i2c/busses/i2c-fsi.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/i2c/busses/i2c-fsi.c b/drivers/i2c/busses/i2c-fsi.c
> index 977d6f524649..10332693edf0 100644
> --- a/drivers/i2c/busses/i2c-fsi.c
> +++ b/drivers/i2c/busses/i2c-fsi.c
> @@ -703,7 +703,7 @@ static int fsi_i2c_probe(struct device *dev)
>
> for (port_no = 0; port_no < ports; port_no++) {
> np = fsi_i2c_find_port_of_node(dev->of_node, port_no);
> - if (np && !of_device_is_available(np))
> + if (!of_device_is_available(np))
> continue;
>
> port = kzalloc(sizeof(*port), GFP_KERNEL);
> --
> 2.24.0
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v2 2/2] i2c: fsi: Prevent adding adapters for ports without dts nodes
2020-07-04 6:39 ` Wolfram Sang
@ 2020-07-06 13:53 ` Eddie James
2020-07-06 14:01 ` Wolfram Sang
0 siblings, 1 reply; 9+ messages in thread
From: Eddie James @ 2020-07-06 13:53 UTC (permalink / raw)
To: Wolfram Sang; +Cc: linux-i2c, linux-kernel, andy.shevchenko, joel
On 7/4/20 1:39 AM, Wolfram Sang wrote:
> On Tue, Jun 09, 2020 at 03:15:55PM -0500, Eddie James wrote:
>> Ports should be defined in the devicetree if they are to be enabled on
>> the system.
> The patch description does not really fit anymore, does it? There is no
> change in behaviour, we just remove a redundant check.
Hi, it does change the behavior actually. By checking for the device
node pointer, it would proceed and create the port for a NULL device
node, which is not the desired behavior.
Thanks,
Eddie
>
>> Signed-off-by: Eddie James <eajames@linux.ibm.com>
>> Signed-off-by: Joel Stanley <joel@jms.id.au>
>> ---
>> Changes since v1:
>> - Remove the check for null device node since that is checked in
>> of_device_is_available
>>
>> drivers/i2c/busses/i2c-fsi.c | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/i2c/busses/i2c-fsi.c b/drivers/i2c/busses/i2c-fsi.c
>> index 977d6f524649..10332693edf0 100644
>> --- a/drivers/i2c/busses/i2c-fsi.c
>> +++ b/drivers/i2c/busses/i2c-fsi.c
>> @@ -703,7 +703,7 @@ static int fsi_i2c_probe(struct device *dev)
>>
>> for (port_no = 0; port_no < ports; port_no++) {
>> np = fsi_i2c_find_port_of_node(dev->of_node, port_no);
>> - if (np && !of_device_is_available(np))
>> + if (!of_device_is_available(np))
>> continue;
>>
>> port = kzalloc(sizeof(*port), GFP_KERNEL);
>> --
>> 2.24.0
>>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v2 2/2] i2c: fsi: Prevent adding adapters for ports without dts nodes
2020-07-06 13:53 ` Eddie James
@ 2020-07-06 14:01 ` Wolfram Sang
0 siblings, 0 replies; 9+ messages in thread
From: Wolfram Sang @ 2020-07-06 14:01 UTC (permalink / raw)
To: Eddie James; +Cc: linux-i2c, linux-kernel, andy.shevchenko, joel
[-- Attachment #1: Type: text/plain, Size: 215 bytes --]
> Hi, it does change the behavior actually. By checking for the device node
> pointer, it would proceed and create the port for a NULL device node, which
> is not the desired behavior.
Brown paper bag, please...
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v2 2/2] i2c: fsi: Prevent adding adapters for ports without dts nodes
2020-06-09 20:15 ` [PATCH v2 2/2] i2c: fsi: Prevent adding adapters for ports without dts nodes Eddie James
2020-07-04 6:39 ` Wolfram Sang
@ 2020-07-24 19:32 ` Wolfram Sang
1 sibling, 0 replies; 9+ messages in thread
From: Wolfram Sang @ 2020-07-24 19:32 UTC (permalink / raw)
To: Eddie James; +Cc: linux-i2c, linux-kernel, andy.shevchenko, joel
[-- Attachment #1: Type: text/plain, Size: 291 bytes --]
On Tue, Jun 09, 2020 at 03:15:55PM -0500, Eddie James wrote:
> Ports should be defined in the devicetree if they are to be enabled on
> the system.
>
> Signed-off-by: Eddie James <eajames@linux.ibm.com>
> Signed-off-by: Joel Stanley <joel@jms.id.au>
Applied to for-next, thanks!
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2020-07-24 19:32 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-09 20:15 [PATCH v2 0/2] i2c: fsi: Fixes for systems with more ports Eddie James
2020-06-09 20:15 ` [PATCH v2 1/2] i2c: fsi: Fix the port number field in status register Eddie James
2020-06-25 22:26 ` Wolfram Sang
2020-06-09 20:15 ` [PATCH v2 2/2] i2c: fsi: Prevent adding adapters for ports without dts nodes Eddie James
2020-07-04 6:39 ` Wolfram Sang
2020-07-06 13:53 ` Eddie James
2020-07-06 14:01 ` Wolfram Sang
2020-07-24 19:32 ` Wolfram Sang
2020-06-09 22:00 ` [PATCH v2 0/2] i2c: fsi: Fixes for systems with more ports Andy Shevchenko
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).