linux-i2c.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v4 00/16] Allwinner A100 Initial support
@ 2020-07-14  6:55 Frank Lee
  2020-07-14  7:18 ` [PATCH v4 13/16] dt-bindings: i2c: mv64xxx: Add compatible for the A100 i2c node Frank Lee
  2020-07-17  4:28 ` [PATCH v4 00/16] Allwinner A100 Initial support Daniel Lezcano
  0 siblings, 2 replies; 5+ messages in thread
From: Frank Lee @ 2020-07-14  6:55 UTC (permalink / raw)
  To: robh+dt, mripard, wens, mturquette, sboyd, gregory.clement, tglx,
	jason, maz, srinivas.kandagatla, linus.walleij, anarsoul,
	tiny.windzz, rui.zhang, daniel.lezcano, amit.kucheria, lee.jones,
	p.zabel, clabbe, icenowy, megous, stefan, bage, devicetree
  Cc: linux-arm-kernel, linux-kernel, linux-clk, linux-i2c, linux-gpio,
	linux-pm, Yangtao Li

From: Yangtao Li <frank@allwinnertech.com>

This patch set adds initial support for allwinner a100 soc,
which is a 64-bit tablet chip.

v4:
-drop "dt-bindings: pinctrl: sunxi: make gpio banks supplies required"
-fix dcdc1 regulator name
-get rid of underscore in dts node name
-Some trivial things in yaml files

v3:
-Add pmu and nmi support
-Add read data mask for calibration
-Code style
-Some trivial things in yaml files

v2:
-Some naming consistency
-Repair email address
-Fix mmc clock
-Don't export system clock
-Fix checkpatch warning
-Drop unneeded pin function, convert to jtag_gpu and i2s_x

Yangtao Li (16):
  dt-bindings: clk: sunxi-ccu: add compatible string for A100 CCU and
    R-CCU
  clk: sunxi-ng: add support for the Allwinner A100 CCU
  dt-bindings: pinctrl: sunxi: Get rid of continual nesting
  dt-bindings: pinctrl: sunxi: Add A100 pinctrl bindings
  pinctrl: sunxi: add support for the Allwinner A100 pin controller
  dt-bindings: nvmem: SID: add binding for A100's SID controller
  dt-bindings: thermal: sun8i: Add binding for A100's THS controller
  thermal: sun8i: add TEMP_CALIB_MASK for calibration data in
    sun50i_h6_ths_calibrate
  thermal: sun8i: Add A100's THS controller support
  mfd: axp20x: Allow the AXP803 to be probed by I2C
  dt-bindings: irq: sun7i-nmi: fix dt-binding for a80 nmi
  dt-bindings: irq: sun7i-nmi: Add binding for A100's NMI controller
  dt-bindings: i2c: mv64xxx: Add compatible for the A100 i2c node.
  arm64: allwinner: A100: add the basical Allwinner A100 DTSI file
  dt-bindings: arm: sunxi: Add Allwinner A100 Perf1 Board bindings
  arm64: allwinner: A100: add support for Allwinner Perf1 board

 .../devicetree/bindings/arm/sunxi.yaml        |    5 +
 .../clock/allwinner,sun4i-a10-ccu.yaml        |    7 +-
 .../bindings/i2c/marvell,mv64xxx-i2c.yaml     |    3 +
 .../allwinner,sun7i-a20-sc-nmi.yaml           |    5 +-
 .../nvmem/allwinner,sun4i-a10-sid.yaml        |   19 +-
 .../pinctrl/allwinner,sun4i-a10-pinctrl.yaml  |  139 +-
 .../thermal/allwinner,sun8i-a83t-ths.yaml     |    6 +-
 arch/arm64/boot/dts/allwinner/Makefile        |    1 +
 .../allwinner/sun50i-a100-allwinner-perf1.dts |  180 +++
 .../arm64/boot/dts/allwinner/sun50i-a100.dtsi |  364 +++++
 drivers/clk/sunxi-ng/Kconfig                  |   10 +
 drivers/clk/sunxi-ng/Makefile                 |    2 +
 drivers/clk/sunxi-ng/ccu-sun50i-a100-r.c      |  214 +++
 drivers/clk/sunxi-ng/ccu-sun50i-a100-r.h      |   21 +
 drivers/clk/sunxi-ng/ccu-sun50i-a100.c        | 1276 +++++++++++++++++
 drivers/clk/sunxi-ng/ccu-sun50i-a100.h        |   56 +
 drivers/mfd/axp20x-i2c.c                      |    2 +
 drivers/pinctrl/sunxi/Kconfig                 |   10 +
 drivers/pinctrl/sunxi/Makefile                |    2 +
 drivers/pinctrl/sunxi/pinctrl-sun50i-a100-r.c |  105 ++
 drivers/pinctrl/sunxi/pinctrl-sun50i-a100.c   |  708 +++++++++
 drivers/thermal/sun8i_thermal.c               |   16 +-
 include/dt-bindings/clock/sun50i-a100-ccu.h   |  116 ++
 include/dt-bindings/clock/sun50i-a100-r-ccu.h |   23 +
 include/dt-bindings/reset/sun50i-a100-ccu.h   |   68 +
 include/dt-bindings/reset/sun50i-a100-r-ccu.h |   18 +
 26 files changed, 3308 insertions(+), 68 deletions(-)
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a100-r.c
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a100-r.h
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a100.c
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a100.h
 create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun50i-a100-r.c
 create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun50i-a100.c
 create mode 100644 include/dt-bindings/clock/sun50i-a100-ccu.h
 create mode 100644 include/dt-bindings/clock/sun50i-a100-r-ccu.h
 create mode 100644 include/dt-bindings/reset/sun50i-a100-ccu.h
 create mode 100644 include/dt-bindings/reset/sun50i-a100-r-ccu.h

-- 
2.24.0


^ permalink raw reply	[flat|nested] 5+ messages in thread
* [PATCH v4 13/16] dt-bindings: i2c: mv64xxx: Add compatible for the A100 i2c node.
  2020-07-14  6:55 [PATCH v4 00/16] Allwinner A100 Initial support Frank Lee
@ 2020-07-14  7:18 ` Frank Lee
  2020-07-22 10:55   ` Wolfram Sang
  2020-07-17  4:28 ` [PATCH v4 00/16] Allwinner A100 Initial support Daniel Lezcano
  1 sibling, 1 reply; 5+ messages in thread
From: Frank Lee @ 2020-07-14  7:18 UTC (permalink / raw)
  To: gregory.clement, robh+dt
  Cc: linux-i2c, devicetree, linux-kernel, tiny.windzz, huangshuosheng,
	liyong, Yangtao Li, Rob Herring

From: Yangtao Li <frank@allwinnertech.com>

Allwinner A100 have a mv64xxx i2c interface available to be used.

Signed-off-by: Yangtao Li <frank@allwinnertech.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
index 2ceb05ba2df5..5b5ae402f97a 100644
--- a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
@@ -26,6 +26,9 @@ properties:
       - items:
           - const: allwinner,sun50i-a64-i2c
           - const: allwinner,sun6i-a31-i2c
+      - items:
+          - const: allwinner,sun50i-a100-i2c
+          - const: allwinner,sun6i-a31-i2c
       - items:
           - const: allwinner,sun50i-h6-i2c
           - const: allwinner,sun6i-a31-i2c
-- 
2.24.0


^ permalink raw reply related	[flat|nested] 5+ messages in thread
* Re: [PATCH v4 00/16] Allwinner A100 Initial support
  2020-07-14  6:55 [PATCH v4 00/16] Allwinner A100 Initial support Frank Lee
  2020-07-14  7:18 ` [PATCH v4 13/16] dt-bindings: i2c: mv64xxx: Add compatible for the A100 i2c node Frank Lee
@ 2020-07-17  4:28 ` Daniel Lezcano
  2020-07-17  7:38   ` Frank Lee
  1 sibling, 1 reply; 5+ messages in thread
From: Daniel Lezcano @ 2020-07-17  4:28 UTC (permalink / raw)
  To: Frank Lee, robh+dt, mripard, wens, mturquette, sboyd,
	gregory.clement, tglx, jason, maz, srinivas.kandagatla,
	linus.walleij, anarsoul, tiny.windzz, rui.zhang, amit.kucheria,
	lee.jones, p.zabel, clabbe, icenowy, megous, stefan, bage,
	devicetree
  Cc: linux-arm-kernel, linux-kernel, linux-clk, linux-i2c, linux-gpio,
	linux-pm

On 14/07/2020 08:55, Frank Lee wrote:
> From: Yangtao Li <frank@allwinnertech.com>

Do you expect me to pick patches 7,8,9 or ack them ?

> v4:
> -drop "dt-bindings: pinctrl: sunxi: make gpio banks supplies required"
> -fix dcdc1 regulator name
> -get rid of underscore in dts node name
> -Some trivial things in yaml files
> 
> v3:
> -Add pmu and nmi support
> -Add read data mask for calibration
> -Code style
> -Some trivial things in yaml files
> 
> v2:
> -Some naming consistency
> -Repair email address
> -Fix mmc clock
> -Don't export system clock
> -Fix checkpatch warning
> -Drop unneeded pin function, convert to jtag_gpu and i2s_x
> 
> Yangtao Li (16):
>   dt-bindings: clk: sunxi-ccu: add compatible string for A100 CCU and
>     R-CCU
>   clk: sunxi-ng: add support for the Allwinner A100 CCU
>   dt-bindings: pinctrl: sunxi: Get rid of continual nesting
>   dt-bindings: pinctrl: sunxi: Add A100 pinctrl bindings
>   pinctrl: sunxi: add support for the Allwinner A100 pin controller
>   dt-bindings: nvmem: SID: add binding for A100's SID controller
>   dt-bindings: thermal: sun8i: Add binding for A100's THS controller
>   thermal: sun8i: add TEMP_CALIB_MASK for calibration data in
>     sun50i_h6_ths_calibrate
>   thermal: sun8i: Add A100's THS controller support
>   mfd: axp20x: Allow the AXP803 to be probed by I2C
>   dt-bindings: irq: sun7i-nmi: fix dt-binding for a80 nmi
>   dt-bindings: irq: sun7i-nmi: Add binding for A100's NMI controller
>   dt-bindings: i2c: mv64xxx: Add compatible for the A100 i2c node.
>   arm64: allwinner: A100: add the basical Allwinner A100 DTSI file
>   dt-bindings: arm: sunxi: Add Allwinner A100 Perf1 Board bindings
>   arm64: allwinner: A100: add support for Allwinner Perf1 board
> 
>  .../devicetree/bindings/arm/sunxi.yaml        |    5 +
>  .../clock/allwinner,sun4i-a10-ccu.yaml        |    7 +-
>  .../bindings/i2c/marvell,mv64xxx-i2c.yaml     |    3 +
>  .../allwinner,sun7i-a20-sc-nmi.yaml           |    5 +-
>  .../nvmem/allwinner,sun4i-a10-sid.yaml        |   19 +-
>  .../pinctrl/allwinner,sun4i-a10-pinctrl.yaml  |  139 +-
>  .../thermal/allwinner,sun8i-a83t-ths.yaml     |    6 +-
>  arch/arm64/boot/dts/allwinner/Makefile        |    1 +
>  .../allwinner/sun50i-a100-allwinner-perf1.dts |  180 +++
>  .../arm64/boot/dts/allwinner/sun50i-a100.dtsi |  364 +++++
>  drivers/clk/sunxi-ng/Kconfig                  |   10 +
>  drivers/clk/sunxi-ng/Makefile                 |    2 +
>  drivers/clk/sunxi-ng/ccu-sun50i-a100-r.c      |  214 +++
>  drivers/clk/sunxi-ng/ccu-sun50i-a100-r.h      |   21 +
>  drivers/clk/sunxi-ng/ccu-sun50i-a100.c        | 1276 +++++++++++++++++
>  drivers/clk/sunxi-ng/ccu-sun50i-a100.h        |   56 +
>  drivers/mfd/axp20x-i2c.c                      |    2 +
>  drivers/pinctrl/sunxi/Kconfig                 |   10 +
>  drivers/pinctrl/sunxi/Makefile                |    2 +
>  drivers/pinctrl/sunxi/pinctrl-sun50i-a100-r.c |  105 ++
>  drivers/pinctrl/sunxi/pinctrl-sun50i-a100.c   |  708 +++++++++
>  drivers/thermal/sun8i_thermal.c               |   16 +-
>  include/dt-bindings/clock/sun50i-a100-ccu.h   |  116 ++
>  include/dt-bindings/clock/sun50i-a100-r-ccu.h |   23 +
>  include/dt-bindings/reset/sun50i-a100-ccu.h   |   68 +
>  include/dt-bindings/reset/sun50i-a100-r-ccu.h |   18 +
>  26 files changed, 3308 insertions(+), 68 deletions(-)
>  create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
>  create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
>  create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a100-r.c
>  create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a100-r.h
>  create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a100.c
>  create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a100.h
>  create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun50i-a100-r.c
>  create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun50i-a100.c
>  create mode 100644 include/dt-bindings/clock/sun50i-a100-ccu.h
>  create mode 100644 include/dt-bindings/clock/sun50i-a100-r-ccu.h
>  create mode 100644 include/dt-bindings/reset/sun50i-a100-ccu.h
>  create mode 100644 include/dt-bindings/reset/sun50i-a100-r-ccu.h
> 


-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

^ permalink raw reply	[flat|nested] 5+ messages in thread
* Re: [PATCH v4 00/16] Allwinner A100 Initial support
  2020-07-17  4:28 ` [PATCH v4 00/16] Allwinner A100 Initial support Daniel Lezcano
@ 2020-07-17  7:38   ` Frank Lee
  0 siblings, 0 replies; 5+ messages in thread
From: Frank Lee @ 2020-07-17  7:38 UTC (permalink / raw)
  To: Daniel Lezcano
  Cc: Frank Lee, Rob Herring, Maxime Ripard, Chen-Yu Tsai,
	Michael Turquette, Stephen Boyd, gregory.clement,
	Thomas Gleixner, jason, Marc Zyngier, Srini Kandagatla,
	Linus Walleij, Vasily Khoruzhick, Zhang Rui, Amit Kucheria,
	Lee Jones, p.zabel, clabbe, Icenowy Zheng, Ondřej Jirman,
	stefan, bage, devicetree, Linux ARM, Linux Kernel Mailing List,
	linux-clk, linux-i2c, linux-gpio, Linux PM

On Fri, Jul 17, 2020 at 12:28 PM Daniel Lezcano
<daniel.lezcano@linaro.org> wrote:
>
> On 14/07/2020 08:55, Frank Lee wrote:
> > From: Yangtao Li <frank@allwinnertech.com>
>
> Do you expect me to pick patches 7,8,9 or ack them ?
>

Please pick it.

Thx,
Yangtao

^ permalink raw reply	[flat|nested] 5+ messages in thread
* Re: [PATCH v4 13/16] dt-bindings: i2c: mv64xxx: Add compatible for the A100 i2c node.
  2020-07-14  7:18 ` [PATCH v4 13/16] dt-bindings: i2c: mv64xxx: Add compatible for the A100 i2c node Frank Lee
@ 2020-07-22 10:55   ` Wolfram Sang
  0 siblings, 0 replies; 5+ messages in thread
From: Wolfram Sang @ 2020-07-22 10:55 UTC (permalink / raw)
  To: Frank Lee
  Cc: gregory.clement, robh+dt, linux-i2c, devicetree, linux-kernel,
	tiny.windzz, huangshuosheng, liyong, Rob Herring

[-- Attachment #1: Type: text/plain, Size: 318 bytes --]

On Tue, Jul 14, 2020 at 03:18:39PM +0800, Frank Lee wrote:
> From: Yangtao Li <frank@allwinnertech.com>
> 
> Allwinner A100 have a mv64xxx i2c interface available to be used.
> 
> Signed-off-by: Yangtao Li <frank@allwinnertech.com>
> Reviewed-by: Rob Herring <robh@kernel.org>

Applied to for-next, thanks!


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 5+ messages in thread
end of thread, other threads:[~2020-07-22 10:55 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-14  6:55 [PATCH v4 00/16] Allwinner A100 Initial support Frank Lee
2020-07-14  7:18 ` [PATCH v4 13/16] dt-bindings: i2c: mv64xxx: Add compatible for the A100 i2c node Frank Lee
2020-07-22 10:55   ` Wolfram Sang
2020-07-17  4:28 ` [PATCH v4 00/16] Allwinner A100 Initial support Daniel Lezcano
2020-07-17  7:38   ` Frank Lee

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).