linux-i2c.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sakari Ailus <sakari.ailus@linux.intel.com>
To: linux-i2c@vger.kernel.org
Cc: Wolfram Sang <wsa@the-dreams.de>,
	"Rafael J. Wysocki" <rafael@kernel.org>,
	linux-acpi@vger.kernel.org, linux-kernel@vger.kernel.org,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	rajmohan.mani@intel.com, Tomasz Figa <tfiga@chromium.org>,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>,
	Bingbu Cao <bingbu.cao@intel.com>,
	Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>,
	Hyungwoo Yang <hyungwoo.yang@intel.com>,
	linux-media@vger.kernel.org
Subject: [PATCH v8 5/6] media: i2c: imx319: Support probe while the device is off
Date: Thu,  3 Sep 2020 11:15:49 +0300	[thread overview]
Message-ID: <20200903081550.6012-6-sakari.ailus@linux.intel.com> (raw)
In-Reply-To: <20200903081550.6012-1-sakari.ailus@linux.intel.com>

From: Rajmohan Mani <rajmohan.mani@intel.com>

Tell ACPI device PM code that the driver supports the device being powered
off when the driver's probe function is entered.

Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
 drivers/media/i2c/imx319.c | 74 +++++++++++++++++++++++---------------
 1 file changed, 45 insertions(+), 29 deletions(-)

diff --git a/drivers/media/i2c/imx319.c b/drivers/media/i2c/imx319.c
index 17c2e4b41221e..6b63bb0abb138 100644
--- a/drivers/media/i2c/imx319.c
+++ b/drivers/media/i2c/imx319.c
@@ -140,6 +140,8 @@ struct imx319 {
 
 	/* Streaming on/off */
 	bool streaming;
+	/* True if the device has been identified */
+	bool identified;
 };
 
 static const struct imx319_reg imx319_global_regs[] = {
@@ -2084,6 +2086,31 @@ imx319_set_pad_format(struct v4l2_subdev *sd,
 	return 0;
 }
 
+/* Verify chip ID */
+static int imx319_identify_module(struct imx319 *imx319)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&imx319->sd);
+	int ret;
+	u32 val;
+
+	if (imx319->identified)
+		return 0;
+
+	ret = imx319_read_reg(imx319, IMX319_REG_CHIP_ID, 2, &val);
+	if (ret)
+		return ret;
+
+	if (val != IMX319_CHIP_ID) {
+		dev_err(&client->dev, "chip id mismatch: %x!=%x",
+			IMX319_CHIP_ID, val);
+		return -EIO;
+	}
+
+	imx319->identified = true;
+
+	return 0;
+}
+
 /* Start streaming */
 static int imx319_start_streaming(struct imx319 *imx319)
 {
@@ -2091,6 +2118,10 @@ static int imx319_start_streaming(struct imx319 *imx319)
 	const struct imx319_reg_list *reg_list;
 	int ret;
 
+	ret = imx319_identify_module(imx319);
+	if (ret)
+		return ret;
+
 	/* Global Setting */
 	reg_list = &imx319_global_setting;
 	ret = imx319_write_regs(imx319, reg_list->regs, reg_list->num_of_regs);
@@ -2210,26 +2241,6 @@ static int __maybe_unused imx319_resume(struct device *dev)
 	return ret;
 }
 
-/* Verify chip ID */
-static int imx319_identify_module(struct imx319 *imx319)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&imx319->sd);
-	int ret;
-	u32 val;
-
-	ret = imx319_read_reg(imx319, IMX319_REG_CHIP_ID, 2, &val);
-	if (ret)
-		return ret;
-
-	if (val != IMX319_CHIP_ID) {
-		dev_err(&client->dev, "chip id mismatch: %x!=%x",
-			IMX319_CHIP_ID, val);
-		return -EIO;
-	}
-
-	return 0;
-}
-
 static const struct v4l2_subdev_core_ops imx319_subdev_core_ops = {
 	.subscribe_event = v4l2_ctrl_subdev_subscribe_event,
 	.unsubscribe_event = v4l2_event_subdev_unsubscribe,
@@ -2424,6 +2435,7 @@ static struct imx319_hwcfg *imx319_get_hwcfg(struct device *dev)
 static int imx319_probe(struct i2c_client *client)
 {
 	struct imx319 *imx319;
+	bool low_power;
 	int ret;
 	u32 i;
 
@@ -2436,11 +2448,14 @@ static int imx319_probe(struct i2c_client *client)
 	/* Initialize subdev */
 	v4l2_i2c_subdev_init(&imx319->sd, client, &imx319_subdev_ops);
 
-	/* Check module identity */
-	ret = imx319_identify_module(imx319);
-	if (ret) {
-		dev_err(&client->dev, "failed to find sensor: %d", ret);
-		goto error_probe;
+	low_power = acpi_dev_state_low_power(&client->dev);
+	if (!low_power) {
+		/* Check module identity */
+		ret = imx319_identify_module(imx319);
+		if (ret) {
+			dev_err(&client->dev, "failed to find sensor: %d", ret);
+			goto error_probe;
+		}
 	}
 
 	imx319->hwcfg = imx319_get_hwcfg(&client->dev);
@@ -2493,10 +2508,10 @@ static int imx319_probe(struct i2c_client *client)
 		goto error_media_entity;
 
 	/*
-	 * Device is already turned on by i2c-core with ACPI domain PM.
-	 * Enable runtime PM and turn off the device.
+	 * Don't set the device's state to active if it's in a low power state.
 	 */
-	pm_runtime_set_active(&client->dev);
+	if (!low_power)
+		pm_runtime_set_active(&client->dev);
 	pm_runtime_enable(&client->dev);
 	pm_runtime_idle(&client->dev);
 
@@ -2536,7 +2551,7 @@ static const struct dev_pm_ops imx319_pm_ops = {
 };
 
 static const struct acpi_device_id imx319_acpi_ids[] = {
-	{ "SONY319A" },
+	{ "SONY319A", },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(acpi, imx319_acpi_ids);
@@ -2549,6 +2564,7 @@ static struct i2c_driver imx319_i2c_driver = {
 	},
 	.probe_new = imx319_probe,
 	.remove = imx319_remove,
+	.flags = I2C_DRV_FL_ALLOW_LOW_POWER_PROBE,
 };
 module_i2c_driver(imx319_i2c_driver);
 
-- 
2.20.1


  parent reply	other threads:[~2020-09-03  8:16 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-03  8:15 [PATCH v8 0/6] Support running driver's probe for a device powered off Sakari Ailus
2020-09-03  8:15 ` [PATCH v8 1/6] i2c: Allow an ACPI driver to manage the device's power state during probe Sakari Ailus
2020-09-03  8:15 ` [PATCH v8 2/6] Documentation: ACPI: Document i2c-allow-low-power-probe _DSD property Sakari Ailus
2020-09-03  8:15 ` [PATCH v8 3/6] ACPI: Add a convenience function to tell a device is in low power state Sakari Ailus
     [not found]   ` <0c2d4728-6e32-ef93-8961-381fe36cfdaa@linux.intel.com>
2020-09-11 13:01     ` Sakari Ailus
2020-09-03  8:15 ` [PATCH v8 4/6] ov5670: Support probe whilst the device is in a " Sakari Ailus
2020-09-03  8:15 ` Sakari Ailus [this message]
2020-09-03  8:15 ` [PATCH v8 6/6] at24: Support probing while off Sakari Ailus
2020-09-09  9:35   ` Bartosz Golaszewski
2020-09-09 11:11     ` Wolfram Sang
2020-09-09 11:56       ` Bartosz Golaszewski
2020-09-09 12:16         ` Sakari Ailus
2020-09-11 12:11         ` Sakari Ailus
2020-10-06 11:20   ` Tomasz Figa
2020-10-06 11:23     ` Tomasz Figa
2020-09-11 12:49 ` [PATCH v8 0/6] Support running driver's probe for a device powered off Luca Ceresoli
2020-09-11 13:01   ` Sakari Ailus
2020-09-14  7:58     ` Luca Ceresoli
     [not found]       ` <20200914094727.GM26842@paasikivi.fi.intel.com>
2020-09-14 16:49         ` Luca Ceresoli
2020-09-23 11:08           ` Sakari Ailus
2020-09-23 15:37             ` Luca Ceresoli
2020-09-26 12:38         ` Tomasz Figa
2020-09-27 19:39           ` Wolfram Sang
2020-09-27 19:44             ` Tomasz Figa
2020-09-28 14:17               ` Rafael J. Wysocki
2020-09-28 16:49                 ` Tomasz Figa
2020-09-28 20:49                   ` Sakari Ailus
2020-09-26 12:46 ` Tomasz Figa
2021-01-28 23:27 ` [PATCH v9 1/7] ACPI: scan: Obtain device's desired enumeration power state Sakari Ailus
     [not found]   ` <CAJZ5v0hdG1W0D5E6GbrTDiAjMyC0mSgb3Z2WEBy3hhb4iJhDNw@mail.gmail.com>
2021-01-29 16:45     ` Sakari Ailus
2021-01-29 16:57       ` Rafael J. Wysocki
2021-01-29 21:22         ` Sakari Ailus
2021-02-01 11:44           ` Rafael J. Wysocki
2021-01-28 23:27 ` [PATCH v9 2/7] i2c: Allow an ACPI driver to manage the device's power state during probe Sakari Ailus
2021-01-28 23:27 ` [PATCH v9 3/7] Documentation: ACPI: Document _PRE object usage for enum power state Sakari Ailus
2021-01-28 23:27 ` [PATCH v9 4/7] ACPI: Add a convenience function to tell a device is in low " Sakari Ailus
2021-01-28 23:27 ` [PATCH v9 5/7] ov5670: Support probe whilst the device is in a " Sakari Ailus
2021-01-28 23:27 ` [PATCH v9 6/7] media: i2c: imx319: Support probe while the device is off Sakari Ailus
2021-01-29  2:58   ` Bingbu Cao
2021-01-28 23:27 ` [PATCH v9 7/7] at24: Support probing while off Sakari Ailus
     [not found]   ` <CAMpxmJVTPgvxOVdTkmt4VjUnGabNBKauKF_DKtnnkV6O0QYTWA@mail.gmail.com>
     [not found]     ` <20210129121955.GH32460@paasikivi.fi.intel.com>
2021-02-01  8:57       ` Bartosz Golaszewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200903081550.6012-6-sakari.ailus@linux.intel.com \
    --to=sakari.ailus@linux.intel.com \
    --cc=bgolaszewski@baylibre.com \
    --cc=bingbu.cao@intel.com \
    --cc=chiranjeevi.rapolu@intel.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=hyungwoo.yang@intel.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=rafael@kernel.org \
    --cc=rajmohan.mani@intel.com \
    --cc=tfiga@chromium.org \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).