From: Wolfram Sang <wsa@kernel.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org,
Peter Rosin <peda@axentia.se>,
Bartosz Golaszewski <brgl@bgdev.pl>
Subject: [PULL REQUEST] i2c for 5.11
Date: Mon, 14 Dec 2020 22:53:35 +0100 [thread overview]
Message-ID: <20201214215335.GA4651@kunai> (raw)
[-- Attachment #1: Type: text/plain, Size: 6926 bytes --]
Linus,
the pull request for I2C is a bit smaller this time with mostly usual
driver updates. Slave support for imx stands out a little.
Please pull.
Thanks,
Wolfram
The following changes since commit 0477e92881850d44910a7e94fc2c46f96faa131f:
Linux 5.10-rc7 (2020-12-06 14:25:12 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git i2c/for-5.11
for you to fetch changes up to 4e970a0ada5299d017a4263074f725227c2d2852:
i2c: remove check that can never be true (2020-12-11 15:43:49 +0100)
----------------------------------------------------------------
Alexandre Belloni (1):
i2c: at91: remove legacy DMA left overs
Andy Shevchenko (2):
i2c: designware: Switch header to use BIT() and GENMASK()
i2c: designware: Make register offsets all of the same width
Aswath Govindraju (1):
dt-bindings: i2c: Add compatible string for AM64 SoC
Biwen Li (1):
i2c: imx: support slave mode for imx I2C driver
Bjorn Andersson (1):
Revert "i2c: qcom-geni: Disable DMA processing on the Lenovo Yoga C630"
Codrin Ciubotariu (1):
i2c: pxa: move to generic GPIO recovery
Cristian Ciocaltea (4):
i2c: owl: Add support for atomic transfers
i2c: owl: Enable asynchronous probing
dt-bindings: i2c: owl: Convert Actions Semi Owl binding to a schema
i2c: owl: Add compatible for the Actions Semi S500 I2C controller
Douglas Anderson (3):
soc: qcom: geni: More properly switch to DMA mode
Revert "i2c: i2c-qcom-geni: Fix DMA transfer race"
soc: qcom: geni: Optimize/comment select fifo/dma mode
Fabio Estevam (2):
i2c: imx: Remove unused .id_table support
i2c: mxs: Remove unneeded platform_device_id
Geert Uytterhoeven (1):
i2c: sh_mobile: Mark adapter suspended during suspend
Khalil Blaiech (1):
dt-bindings: i2c: mellanox,i2c-mlxbf: convert txt to YAML schema
Mario Alejandro Posso Escobar (1):
i2c: ismt: Adding support for I2C_SMBUS_BLOCK_PROC_CALL
Mark Tomlinson (1):
i2c: mv64xxx: Add bus error recovery
Martin Kaiser (3):
i2c: exynos5: remove duplicate error message
i2c: exynos5: fix platform_get_irq error handling
i2c: exynos5: don't check for irq 0
Sagar Shrikant Kadam (1):
i2c: ocores: fix polling mode workaround on FU540-C000 SoC
Stefan Lässer (1):
i2c: ocores: Avoid false-positive error log message.
Uwe Kleine-König (3):
i2c: pca-platform: drop two members from driver data that are assigned to only
i2c: Warn when device removing fails
i2c: remove check that can never be true
Vaibhav Gupta (1):
i2c: nvidia-gpu: drop empty stub for runtime pm
Wolfram Sang (2):
Merge tag '20201013212531.428538-1-dianders@chromium.org' of https://git.kernel.org/.../qcom/linux into i2c/for-5.11
Merge branch 'i2c/for-current' into i2c/for-5.11
Yash Shah (1):
dt-bindings: i2c: Update DT binding docs to support SiFive FU740 SoC
with much appreciated quality assurance from
----------------------------------------------------------------
Akash Asthana (3):
(Rev.) Revert "i2c: qcom-geni: Disable DMA processing on the Lenovo Yoga C630"
(Rev.) Revert "i2c: i2c-qcom-geni: Fix DMA transfer race"
(Rev.) soc: qcom: geni: More properly switch to DMA mode
Andrew Lunn (1):
(Rev.) i2c: ocores: Avoid false-positive error log message.
Codrin Ciubotariu (1):
(Rev.) i2c: at91: remove legacy DMA left overs
Dmitry Baryshkov (2):
(Test) Revert "i2c: i2c-qcom-geni: Fix DMA transfer race"
(Test) soc: qcom: geni: More properly switch to DMA mode
Jarkko Nikula (1):
(Rev.) i2c: nvidia-gpu: drop empty stub for runtime pm
Krzysztof Kozlowski (3):
(Rev.) i2c: exynos5: don't check for irq 0
(Rev.) i2c: exynos5: fix platform_get_irq error handling
(Rev.) i2c: exynos5: remove duplicate error message
Manivannan Sadhasivam (4):
(Rev.) i2c: owl: Add compatible for the Actions Semi S500 I2C controller
(Rev.) i2c: owl: Add compatible for the Actions Semi S500 I2C controller
(Rev.) i2c: owl: Enable asynchronous probing
(Rev.) i2c: owl: Add support for atomic transfers
Peter Korsgaard (1):
(Rev.) i2c: ocores: Avoid false-positive error log message.
Rob Herring (3):
(Rev.) dt-bindings: i2c: Update DT binding docs to support SiFive FU740 SoC
(Rev.) dt-bindings: i2c: owl: Convert Actions Semi Owl binding to a schema
(Rev.) dt-bindings: i2c: mellanox,i2c-mlxbf: convert txt to YAML schema
Steev Klimaszewski (1):
(Test) Revert "i2c: qcom-geni: Disable DMA processing on the Lenovo Yoga C630"
Stephen Boyd (2):
(Rev.) Revert "i2c: i2c-qcom-geni: Fix DMA transfer race"
(Rev.) soc: qcom: geni: More properly switch to DMA mode
.../devicetree/bindings/i2c/i2c-ocores.txt | 8 +-
Documentation/devicetree/bindings/i2c/i2c-omap.txt | 1 +
Documentation/devicetree/bindings/i2c/i2c-owl.txt | 29 ---
Documentation/devicetree/bindings/i2c/i2c-owl.yaml | 62 ++++++
.../devicetree/bindings/i2c/mellanox,i2c-mlxbf.txt | 42 ----
.../bindings/i2c/mellanox,i2c-mlxbf.yaml | 78 +++++++
MAINTAINERS | 3 +-
drivers/i2c/busses/Kconfig | 1 +
drivers/i2c/busses/i2c-at91-master.c | 1 -
drivers/i2c/busses/i2c-at91.h | 2 -
drivers/i2c/busses/i2c-designware-core.h | 98 ++++-----
drivers/i2c/busses/i2c-exynos5.c | 5 +-
drivers/i2c/busses/i2c-imx.c | 239 +++++++++++++++++----
drivers/i2c/busses/i2c-ismt.c | 19 +-
drivers/i2c/busses/i2c-mv64xxx.c | 29 ++-
drivers/i2c/busses/i2c-mxs.c | 22 +-
drivers/i2c/busses/i2c-nvidia-gpu.c | 10 +-
drivers/i2c/busses/i2c-ocores.c | 25 ++-
drivers/i2c/busses/i2c-owl.c | 75 +++++--
drivers/i2c/busses/i2c-pca-platform.c | 4 -
drivers/i2c/busses/i2c-pxa.c | 76 +------
drivers/i2c/busses/i2c-qcom-geni.c | 18 +-
drivers/i2c/busses/i2c-sh_mobile.c | 28 +++
drivers/i2c/i2c-core-base.c | 14 +-
drivers/soc/qcom/qcom-geni-se.c | 55 +++--
25 files changed, 604 insertions(+), 340 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-owl.txt
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-owl.yaml
delete mode 100644 Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.txt
create mode 100644 Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next reply other threads:[~2020-12-14 21:54 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-14 21:53 Wolfram Sang [this message]
2020-12-16 1:00 ` [PULL REQUEST] i2c for 5.11 pr-tracker-bot
2021-01-09 8:31 Wolfram Sang
2021-01-09 19:51 ` pr-tracker-bot
2021-01-23 12:43 Wolfram Sang
2021-01-23 20:05 ` pr-tracker-bot
[not found] <20210131114017.GA1332@kunai>
2021-01-31 19:34 ` Linus Torvalds
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201214215335.GA4651@kunai \
--to=wsa@kernel.org \
--cc=brgl@bgdev.pl \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=peda@axentia.se \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).