Linux-i2c Archive on lore.kernel.org
 help / color / Atom feed
From: Chris Packham <chris.packham@alliedtelesis.co.nz>
To: robh+dt@kernel.org, linux@roeck-us.net, wsa@kernel.org,
	jdelvare@suse.com
Cc: linux-i2c@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Chris Packham <chris.packham@alliedtelesis.co.nz>
Subject: [PATCH v2 5/6] i2c: mpc: use device managed APIs
Date: Mon, 29 Mar 2021 14:52:05 +1300
Message-ID: <20210329015206.17437-6-chris.packham@alliedtelesis.co.nz> (raw)
In-Reply-To: <20210329015206.17437-1-chris.packham@alliedtelesis.co.nz>

Use device managed functions an clean up error handling.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
 drivers/i2c/busses/i2c-mpc.c | 46 ++++++++++++++----------------------
 1 file changed, 18 insertions(+), 28 deletions(-)

diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 5b746a898e8e..46cdb36e2f9b 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -654,7 +654,6 @@ static int fsl_i2c_probe(struct platform_device *op)
 	u32 clock = MPC_I2C_CLOCK_LEGACY;
 	int result = 0;
 	int plen;
-	struct resource res;
 	struct clk *clk;
 	int err;
 
@@ -662,7 +661,7 @@ static int fsl_i2c_probe(struct platform_device *op)
 	if (!match)
 		return -EINVAL;
 
-	i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
+	i2c = devm_kzalloc(&op->dev, sizeof(*i2c), GFP_KERNEL);
 	if (!i2c)
 		return -ENOMEM;
 
@@ -670,24 +669,21 @@ static int fsl_i2c_probe(struct platform_device *op)
 
 	init_waitqueue_head(&i2c->queue);
 
-	i2c->base = of_iomap(op->dev.of_node, 0);
-	if (!i2c->base) {
+	i2c->base = devm_platform_ioremap_resource(op, 0);
+	if (IS_ERR(i2c->base)) {
 		dev_err(i2c->dev, "failed to map controller\n");
-		result = -ENOMEM;
-		goto fail_map;
+		return PTR_ERR(i2c->base);
 	}
 
-	i2c->irq = irq_of_parse_and_map(op->dev.of_node, 0);
-	if (i2c->irq < 0) {
-		result = i2c->irq;
-		goto fail_map;
-	}
+	i2c->irq = platform_get_irq(op, 0);
+	if (i2c->irq < 0)
+		return i2c->irq;
 
-	result = request_irq(i2c->irq, mpc_i2c_isr,
+	result = devm_request_irq(&op->dev, i2c->irq, mpc_i2c_isr,
 			IRQF_SHARED, "i2c-mpc", i2c);
 	if (result < 0) {
 		dev_err(i2c->dev, "failed to attach interrupt\n");
-		goto fail_request;
+		return result;
 	}
 
 	/*
@@ -699,7 +695,7 @@ static int fsl_i2c_probe(struct platform_device *op)
 		err = clk_prepare_enable(clk);
 		if (err) {
 			dev_err(&op->dev, "failed to enable clock\n");
-			goto fail_request;
+			return err;
 		} else {
 			i2c->clk_per = clk;
 		}
@@ -731,32 +727,26 @@ static int fsl_i2c_probe(struct platform_device *op)
 	}
 	dev_info(i2c->dev, "timeout %u us\n", mpc_ops.timeout * 1000000 / HZ);
 
-	platform_set_drvdata(op, i2c);
-
 	i2c->adap = mpc_ops;
-	of_address_to_resource(op->dev.of_node, 0, &res);
 	scnprintf(i2c->adap.name, sizeof(i2c->adap.name),
-		  "MPC adapter at 0x%llx", (unsigned long long)res.start);
-	i2c_set_adapdata(&i2c->adap, i2c);
+		  "MPC adapter (%s)", of_node_full_name(op->dev.of_node));
 	i2c->adap.dev.parent = &op->dev;
+	i2c->adap.nr = op->id;
 	i2c->adap.dev.of_node = of_node_get(op->dev.of_node);
 	i2c->adap.bus_recovery_info = &fsl_i2c_recovery_info;
+	platform_set_drvdata(op, i2c);
+	i2c_set_adapdata(&i2c->adap, i2c);
 
-	result = i2c_add_adapter(&i2c->adap);
-	if (result < 0)
+	result = i2c_add_numbered_adapter(&i2c->adap);
+	if (result)
 		goto fail_add;
 
-	return result;
+	return 0;
 
  fail_add:
 	if (i2c->clk_per)
 		clk_disable_unprepare(i2c->clk_per);
-	free_irq(i2c->irq, i2c);
- fail_request:
-	irq_dispose_mapping(i2c->irq);
-	iounmap(i2c->base);
- fail_map:
-	kfree(i2c);
+
 	return result;
 };
 
-- 
2.31.0


  parent reply index

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-29  1:52 [PATCH v2 0/6] i2c: mpc: Refactor to improve responsiveness Chris Packham
2021-03-29  1:52 ` [PATCH v2 1/6] dt-bindings: i2c-mpc: Document interrupt property as required Chris Packham
2021-03-30 15:13   ` Rob Herring
2021-03-29  1:52 ` [PATCH v2 2/6] dt-bindings: i2c: convert i2c-mpc to json-schema Chris Packham
2021-03-30 15:18   ` Rob Herring
2021-03-29  1:52 ` [PATCH v2 3/6] i2c: mpc: Make use of i2c_recover_bus() Chris Packham
2021-03-29  1:52 ` [PATCH v2 4/6] i2c: mpc: make interrupt mandatory and remove polling code Chris Packham
2021-04-10 20:16   ` Wolfram Sang
2021-04-11 23:57     ` Chris Packham
2021-03-29  1:52 ` Chris Packham [this message]
2021-04-12 22:52   ` [PATCH v2 5/6] i2c: mpc: use device managed APIs Andy Shevchenko
2021-04-12 22:55     ` Andy Shevchenko
2021-04-12 23:21     ` Chris Packham
2021-04-12 23:26       ` Chris Packham
2021-04-12 23:34       ` Andy Shevchenko
2021-03-29  1:52 ` [PATCH v2 6/6] i2c: mpc: Interrupt driven transfer Chris Packham
2021-04-10 20:13   ` Wolfram Sang
2021-04-11 21:31     ` Chris Packham
2021-04-12 18:17       ` Wolfram Sang
2021-04-12 22:57     ` Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210329015206.17437-6-chris.packham@alliedtelesis.co.nz \
    --to=chris.packham@alliedtelesis.co.nz \
    --cc=devicetree@vger.kernel.org \
    --cc=jdelvare@suse.com \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=robh+dt@kernel.org \
    --cc=wsa@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-i2c Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-i2c/0 linux-i2c/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-i2c linux-i2c/ https://lore.kernel.org/linux-i2c \
		linux-i2c@vger.kernel.org
	public-inbox-index linux-i2c

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-i2c


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git