From: Jamin Lin <jamin_lin@aspeedtech.com>
To: Rob Herring <robh+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
"Andrew Jeffery" <andrew@aj.id.au>,
Brendan Higgins <brendanhiggins@google.com>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Rayn Chen <rayn_chen@aspeedtech.com>,
"open list:I2C SUBSYSTEM HOST DRIVERS"
<linux-i2c@vger.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
"moderated list:ARM/ASPEED MACHINE SUPPORT"
<linux-arm-kernel@lists.infradead.org>,
"moderated list:ARM/ASPEED MACHINE SUPPORT"
<linux-aspeed@lists.ozlabs.org>,
open list <linux-kernel@vger.kernel.org>,
"moderated list:ARM/ASPEED I2C DRIVER" <openbmc@lists.ozlabs.org>
Cc: <ryan_chen@aspeedtech.com>, <chin-ting_kuo@aspeedtech.com>,
<troy_lee@aspeedtech.com>, <steven_lee@aspeedtech.com>
Subject: [PATCH v2 1/1] dt-bindings: aspeed-i2c: Convert txt to yaml format
Date: Thu, 27 May 2021 18:25:05 +0800 [thread overview]
Message-ID: <20210527102512.20684-2-jamin_lin@aspeedtech.com> (raw)
In-Reply-To: <20210527102512.20684-1-jamin_lin@aspeedtech.com>
Convert aspeed i2c to yaml.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
.../devicetree/bindings/i2c/aspeed,i2c.yaml | 86 +++++++++++++++++++
.../devicetree/bindings/i2c/i2c-aspeed.txt | 49 -----------
2 files changed, 86 insertions(+), 49 deletions(-)
create mode 100644 Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
diff --git a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
new file mode 100644
index 000000000000..1f7064d77708
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/aspeed,i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED I2C on the AST24XX, AST25XX, and AST26XX SoCs Device Tree Bindings
+
+maintainers:
+ - Rayn Chen <rayn_chen@aspeedtech.com>
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - aspeed,ast2400-i2c-bus
+ - aspeed,ast2500-i2c-bus
+ - aspeed,ast2600-i2c-bus
+
+ "#size-cells":
+ const: 0
+
+ "#address-cells":
+ const: 1
+
+ reg:
+ minItems: 1
+ maxItems: 2
+ items:
+ - description: address offset and range of bus
+ - description: address offset and range of bus buffer
+
+ interrupts:
+ maxItems: 1
+ description: interrupt number
+
+ clocks:
+ maxItems: 1
+ description:
+ root clock of bus, should reference the APB
+ clock in the second cell
+
+ reset:
+ maxItems: 1
+ description: phandle to reset controller with the reset number in
+ the second cell
+
+ bus-frequency:
+ minimum: 500
+ maximum: 4000000
+ default: 100000
+ description: frequency of the bus clock in Hz defaults to 100 kHz when not
+ specified
+
+ multi-master:
+ type: boolean
+ description:
+ states that there is another master active on this bus
+
+required:
+ - reg
+ - compatible
+ - clocks
+ - resets
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/aspeed-clock.h>
+ i2c0: i2c-bus@40 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0x40 0x40>;
+ compatible = "aspeed,ast2500-i2c-bus";
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
+ bus-frequency = <100000>;
+ interrupts = <0>;
+ interrupt-parent = <&i2c_ic>;
+ status = "disabled";
+ /* Does not need pinctrl properties */
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
deleted file mode 100644
index b47f6ccb196a..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Device tree configuration for the I2C busses on the AST24XX, AST25XX, and AST26XX SoCs.
-
-Required Properties:
-- #address-cells : should be 1
-- #size-cells : should be 0
-- reg : address offset and range of bus
-- compatible : should be "aspeed,ast2400-i2c-bus"
- or "aspeed,ast2500-i2c-bus"
- or "aspeed,ast2600-i2c-bus"
-- clocks : root clock of bus, should reference the APB
- clock in the second cell
-- resets : phandle to reset controller with the reset number in
- the second cell
-- interrupts : interrupt number
-
-Optional Properties:
-- bus-frequency : frequency of the bus clock in Hz defaults to 100 kHz when not
- specified
-- multi-master : states that there is another master active on this bus.
-
-Example:
-
-i2c {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x1e78a000 0x1000>;
-
- i2c_ic: interrupt-controller@0 {
- #interrupt-cells = <1>;
- compatible = "aspeed,ast2400-i2c-ic";
- reg = <0x0 0x40>;
- interrupts = <12>;
- interrupt-controller;
- };
-
- i2c0: i2c-bus@40 {
- #address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
- reg = <0x40 0x40>;
- compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&syscon ASPEED_CLK_APB>;
- resets = <&syscon ASPEED_RESET_I2C>;
- bus-frequency = <100000>;
- interrupts = <0>;
- interrupt-parent = <&i2c_ic>;
- };
-};
--
2.17.1
next prev parent reply other threads:[~2021-05-27 10:25 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-27 10:25 [PATCH v2 0/1] dt-bindings-aspeed-i2 Convert to yaml format Jamin Lin
2021-05-27 10:25 ` Jamin Lin [this message]
2021-05-27 23:20 ` [PATCH v2 1/1] dt-bindings: aspeed-i2c: Convert txt " Andrew Jeffery
2021-05-28 1:44 ` Jamin Lin
2021-06-02 20:17 ` Rob Herring
2021-06-03 1:46 ` Jamin Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210527102512.20684-2-jamin_lin@aspeedtech.com \
--to=jamin_lin@aspeedtech.com \
--cc=andrew@aj.id.au \
--cc=benh@kernel.crashing.org \
--cc=brendanhiggins@google.com \
--cc=chin-ting_kuo@aspeedtech.com \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=openbmc@lists.ozlabs.org \
--cc=rayn_chen@aspeedtech.com \
--cc=robh+dt@kernel.org \
--cc=ryan_chen@aspeedtech.com \
--cc=steven_lee@aspeedtech.com \
--cc=troy_lee@aspeedtech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).