* [PATCH v2 0/2] i2c: fsi: Fixes for systems with more ports @ 2020-06-09 20:15 Eddie James 2020-06-09 20:15 ` [PATCH v2 1/2] i2c: fsi: Fix the port number field in status register Eddie James ` (2 more replies) 0 siblings, 3 replies; 9+ messages in thread From: Eddie James @ 2020-06-09 20:15 UTC (permalink / raw) To: linux-i2c; +Cc: linux-kernel, andy.shevchenko, wsa, joel, eajames This series fixes a register definition for the FSI-attached I2C master to allow all the available ports. In addition, the code to add an adapter for each port is modified to require a device-tree entry for the bus. This is so that systems with lots of busses that have no devices on them don't add lots of unecessary devices. Changes since v1: - Remove the check for null device node since that is checked in of_device_is_available Eddie James (2): i2c: fsi: Fix the port number field in status register i2c: fsi: Prevent adding adapters for ports without dts nodes drivers/i2c/busses/i2c-fsi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) -- 2.24.0 ^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v2 1/2] i2c: fsi: Fix the port number field in status register 2020-06-09 20:15 [PATCH v2 0/2] i2c: fsi: Fixes for systems with more ports Eddie James @ 2020-06-09 20:15 ` Eddie James 2020-06-25 22:26 ` Wolfram Sang 2020-06-09 20:15 ` [PATCH v2 2/2] i2c: fsi: Prevent adding adapters for ports without dts nodes Eddie James 2020-06-09 22:00 ` [PATCH v2 0/2] i2c: fsi: Fixes for systems with more ports Andy Shevchenko 2 siblings, 1 reply; 9+ messages in thread From: Eddie James @ 2020-06-09 20:15 UTC (permalink / raw) To: linux-i2c; +Cc: linux-kernel, andy.shevchenko, wsa, joel, eajames The port number field in the status register was not correct, so fix it. Fixes: d6ffb6300116 ("i2c: Add FSI-attached I2C master algorithm") Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au> --- drivers/i2c/busses/i2c-fsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-fsi.c b/drivers/i2c/busses/i2c-fsi.c index e0c256922d4f..977d6f524649 100644 --- a/drivers/i2c/busses/i2c-fsi.c +++ b/drivers/i2c/busses/i2c-fsi.c @@ -98,7 +98,7 @@ #define I2C_STAT_DAT_REQ BIT(25) #define I2C_STAT_CMD_COMP BIT(24) #define I2C_STAT_STOP_ERR BIT(23) -#define I2C_STAT_MAX_PORT GENMASK(19, 16) +#define I2C_STAT_MAX_PORT GENMASK(22, 16) #define I2C_STAT_ANY_INT BIT(15) #define I2C_STAT_SCL_IN BIT(11) #define I2C_STAT_SDA_IN BIT(10) -- 2.24.0 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH v2 1/2] i2c: fsi: Fix the port number field in status register 2020-06-09 20:15 ` [PATCH v2 1/2] i2c: fsi: Fix the port number field in status register Eddie James @ 2020-06-25 22:26 ` Wolfram Sang 0 siblings, 0 replies; 9+ messages in thread From: Wolfram Sang @ 2020-06-25 22:26 UTC (permalink / raw) To: Eddie James; +Cc: linux-i2c, linux-kernel, andy.shevchenko, joel [-- Attachment #1: Type: text/plain, Size: 351 bytes --] On Tue, Jun 09, 2020 at 03:15:54PM -0500, Eddie James wrote: > The port number field in the status register was not correct, so fix it. > > Fixes: d6ffb6300116 ("i2c: Add FSI-attached I2C master algorithm") > Signed-off-by: Eddie James <eajames@linux.ibm.com> > Signed-off-by: Joel Stanley <joel@jms.id.au> Applied to for-current, thanks! [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 833 bytes --] ^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v2 2/2] i2c: fsi: Prevent adding adapters for ports without dts nodes 2020-06-09 20:15 [PATCH v2 0/2] i2c: fsi: Fixes for systems with more ports Eddie James 2020-06-09 20:15 ` [PATCH v2 1/2] i2c: fsi: Fix the port number field in status register Eddie James @ 2020-06-09 20:15 ` Eddie James 2020-07-04 6:39 ` Wolfram Sang 2020-07-24 19:32 ` Wolfram Sang 2020-06-09 22:00 ` [PATCH v2 0/2] i2c: fsi: Fixes for systems with more ports Andy Shevchenko 2 siblings, 2 replies; 9+ messages in thread From: Eddie James @ 2020-06-09 20:15 UTC (permalink / raw) To: linux-i2c; +Cc: linux-kernel, andy.shevchenko, wsa, joel, eajames Ports should be defined in the devicetree if they are to be enabled on the system. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au> --- Changes since v1: - Remove the check for null device node since that is checked in of_device_is_available drivers/i2c/busses/i2c-fsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-fsi.c b/drivers/i2c/busses/i2c-fsi.c index 977d6f524649..10332693edf0 100644 --- a/drivers/i2c/busses/i2c-fsi.c +++ b/drivers/i2c/busses/i2c-fsi.c @@ -703,7 +703,7 @@ static int fsi_i2c_probe(struct device *dev) for (port_no = 0; port_no < ports; port_no++) { np = fsi_i2c_find_port_of_node(dev->of_node, port_no); - if (np && !of_device_is_available(np)) + if (!of_device_is_available(np)) continue; port = kzalloc(sizeof(*port), GFP_KERNEL); -- 2.24.0 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH v2 2/2] i2c: fsi: Prevent adding adapters for ports without dts nodes 2020-06-09 20:15 ` [PATCH v2 2/2] i2c: fsi: Prevent adding adapters for ports without dts nodes Eddie James @ 2020-07-04 6:39 ` Wolfram Sang 2020-07-06 13:53 ` Eddie James 2020-07-24 19:32 ` Wolfram Sang 1 sibling, 1 reply; 9+ messages in thread From: Wolfram Sang @ 2020-07-04 6:39 UTC (permalink / raw) To: Eddie James; +Cc: linux-i2c, linux-kernel, andy.shevchenko, joel [-- Attachment #1: Type: text/plain, Size: 1172 bytes --] On Tue, Jun 09, 2020 at 03:15:55PM -0500, Eddie James wrote: > Ports should be defined in the devicetree if they are to be enabled on > the system. The patch description does not really fit anymore, does it? There is no change in behaviour, we just remove a redundant check. > > Signed-off-by: Eddie James <eajames@linux.ibm.com> > Signed-off-by: Joel Stanley <joel@jms.id.au> > --- > Changes since v1: > - Remove the check for null device node since that is checked in > of_device_is_available > > drivers/i2c/busses/i2c-fsi.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/i2c/busses/i2c-fsi.c b/drivers/i2c/busses/i2c-fsi.c > index 977d6f524649..10332693edf0 100644 > --- a/drivers/i2c/busses/i2c-fsi.c > +++ b/drivers/i2c/busses/i2c-fsi.c > @@ -703,7 +703,7 @@ static int fsi_i2c_probe(struct device *dev) > > for (port_no = 0; port_no < ports; port_no++) { > np = fsi_i2c_find_port_of_node(dev->of_node, port_no); > - if (np && !of_device_is_available(np)) > + if (!of_device_is_available(np)) > continue; > > port = kzalloc(sizeof(*port), GFP_KERNEL); > -- > 2.24.0 > [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 833 bytes --] ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v2 2/2] i2c: fsi: Prevent adding adapters for ports without dts nodes 2020-07-04 6:39 ` Wolfram Sang @ 2020-07-06 13:53 ` Eddie James 2020-07-06 14:01 ` Wolfram Sang 0 siblings, 1 reply; 9+ messages in thread From: Eddie James @ 2020-07-06 13:53 UTC (permalink / raw) To: Wolfram Sang; +Cc: linux-i2c, linux-kernel, andy.shevchenko, joel On 7/4/20 1:39 AM, Wolfram Sang wrote: > On Tue, Jun 09, 2020 at 03:15:55PM -0500, Eddie James wrote: >> Ports should be defined in the devicetree if they are to be enabled on >> the system. > The patch description does not really fit anymore, does it? There is no > change in behaviour, we just remove a redundant check. Hi, it does change the behavior actually. By checking for the device node pointer, it would proceed and create the port for a NULL device node, which is not the desired behavior. Thanks, Eddie > >> Signed-off-by: Eddie James <eajames@linux.ibm.com> >> Signed-off-by: Joel Stanley <joel@jms.id.au> >> --- >> Changes since v1: >> - Remove the check for null device node since that is checked in >> of_device_is_available >> >> drivers/i2c/busses/i2c-fsi.c | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/drivers/i2c/busses/i2c-fsi.c b/drivers/i2c/busses/i2c-fsi.c >> index 977d6f524649..10332693edf0 100644 >> --- a/drivers/i2c/busses/i2c-fsi.c >> +++ b/drivers/i2c/busses/i2c-fsi.c >> @@ -703,7 +703,7 @@ static int fsi_i2c_probe(struct device *dev) >> >> for (port_no = 0; port_no < ports; port_no++) { >> np = fsi_i2c_find_port_of_node(dev->of_node, port_no); >> - if (np && !of_device_is_available(np)) >> + if (!of_device_is_available(np)) >> continue; >> >> port = kzalloc(sizeof(*port), GFP_KERNEL); >> -- >> 2.24.0 >> ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v2 2/2] i2c: fsi: Prevent adding adapters for ports without dts nodes 2020-07-06 13:53 ` Eddie James @ 2020-07-06 14:01 ` Wolfram Sang 0 siblings, 0 replies; 9+ messages in thread From: Wolfram Sang @ 2020-07-06 14:01 UTC (permalink / raw) To: Eddie James; +Cc: linux-i2c, linux-kernel, andy.shevchenko, joel [-- Attachment #1: Type: text/plain, Size: 215 bytes --] > Hi, it does change the behavior actually. By checking for the device node > pointer, it would proceed and create the port for a NULL device node, which > is not the desired behavior. Brown paper bag, please... [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 833 bytes --] ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v2 2/2] i2c: fsi: Prevent adding adapters for ports without dts nodes 2020-06-09 20:15 ` [PATCH v2 2/2] i2c: fsi: Prevent adding adapters for ports without dts nodes Eddie James 2020-07-04 6:39 ` Wolfram Sang @ 2020-07-24 19:32 ` Wolfram Sang 1 sibling, 0 replies; 9+ messages in thread From: Wolfram Sang @ 2020-07-24 19:32 UTC (permalink / raw) To: Eddie James; +Cc: linux-i2c, linux-kernel, andy.shevchenko, joel [-- Attachment #1: Type: text/plain, Size: 291 bytes --] On Tue, Jun 09, 2020 at 03:15:55PM -0500, Eddie James wrote: > Ports should be defined in the devicetree if they are to be enabled on > the system. > > Signed-off-by: Eddie James <eajames@linux.ibm.com> > Signed-off-by: Joel Stanley <joel@jms.id.au> Applied to for-next, thanks! [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 833 bytes --] ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v2 0/2] i2c: fsi: Fixes for systems with more ports 2020-06-09 20:15 [PATCH v2 0/2] i2c: fsi: Fixes for systems with more ports Eddie James 2020-06-09 20:15 ` [PATCH v2 1/2] i2c: fsi: Fix the port number field in status register Eddie James 2020-06-09 20:15 ` [PATCH v2 2/2] i2c: fsi: Prevent adding adapters for ports without dts nodes Eddie James @ 2020-06-09 22:00 ` Andy Shevchenko 2 siblings, 0 replies; 9+ messages in thread From: Andy Shevchenko @ 2020-06-09 22:00 UTC (permalink / raw) To: Eddie James; +Cc: linux-i2c, Linux Kernel Mailing List, wsa, Joel Stanley On Tue, Jun 9, 2020 at 11:15 PM Eddie James <eajames@linux.ibm.com> wrote: > > This series fixes a register definition for the FSI-attached I2C master to > allow all the available ports. In addition, the code to add an adapter for > each port is modified to require a device-tree entry for the bus. This is so > that systems with lots of busses that have no devices on them don't add lots > of unecessary devices. > FWIW, Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> > Changes since v1: > - Remove the check for null device node since that is checked in > of_device_is_available > > Eddie James (2): > i2c: fsi: Fix the port number field in status register > i2c: fsi: Prevent adding adapters for ports without dts nodes > > drivers/i2c/busses/i2c-fsi.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > -- > 2.24.0 > -- With Best Regards, Andy Shevchenko ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2020-07-24 19:32 UTC | newest] Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-06-09 20:15 [PATCH v2 0/2] i2c: fsi: Fixes for systems with more ports Eddie James 2020-06-09 20:15 ` [PATCH v2 1/2] i2c: fsi: Fix the port number field in status register Eddie James 2020-06-25 22:26 ` Wolfram Sang 2020-06-09 20:15 ` [PATCH v2 2/2] i2c: fsi: Prevent adding adapters for ports without dts nodes Eddie James 2020-07-04 6:39 ` Wolfram Sang 2020-07-06 13:53 ` Eddie James 2020-07-06 14:01 ` Wolfram Sang 2020-07-24 19:32 ` Wolfram Sang 2020-06-09 22:00 ` [PATCH v2 0/2] i2c: fsi: Fixes for systems with more ports Andy Shevchenko
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).